Client light configurations... HOW!

Similar Questions

• Install Adobe Reader on my Client light t510

  Trying to figure out how to add Adobe reader to a Client light t510.  I have never userd a before and my boss likes to give me new challenges.

  Hello

  They run Microsoft Windows Embedded CE 6.0. No facility available for Windows CE, BUT you can still read PDF files:

  Silverlight for Windows Embedded	The power of Silverlight to create rich applications and the Windows Embedded CE user interfaces
  Internet Explorer integrated	Internet Explorer with panning and zooming capabilities and a customizable interface to optimize the browsing experience on devices
  Flash Lite	Browser plug in to make multimedia Web sites
  Touch and movement	Engine plug-in to activate the natural input capabilities and gesture animations
  Connection Manager	Infrastructure technology to manage multiple network interfaces on the device
  Microsoft Office and PDF viewers	Applications to Microsoft Office Word, PowerPoint, Excel and Adobe PDF content on the device
  QQ Messenger	Client side device to connect to the popular instant messaging service

  You need not do anything.

  Kind regards.

• I have Windows Vista and my Security Center somehow got off? He asks me to password administrator and confirmation to light? How to do this.

  I have Windows Vista and my Security Center somehow got off? He asks me to password administrator and confirmation to light? How to do this.

  Hello

  1 are logged in as an administrator on the computer?

  2. you set a password in the computer?

  Enter the same administrator password that allows you to enter the administrator account when you try to connect to the computer and check if it is on or not.

  Let us know if the problem is solved or not.

• Catch 22 - Port Trunk Configurations: how to combine identifiers VLAN native with DHCP (but allows traffic of VM)

  Catch 22 - Port Network Configurations: how to combine identifiers VLAN native with DHCP (but allow the virtual computer)

  I came across a Catch 22.  Maybe someone can restore the directly here.  I found a "witch hunt" for sure.

  It comes with the Ports of junction on the side of the switch of the ESX host network.

  Context:

  Ok. The Setup is a HP Blade C7000 enclosure.  I try to configure ports for switching to the blades.  ESX 3.5 U4 will be installed the BL460cs.  Installation is preferred method: revive unattended.  No problem with the syntax of Kick-Start,

  I am here, it's the side network.

  The problem:

  I find a major complication in that the switch ports must be configured for both traffic Service Console and VMkernel, more Virtual Machine since only two NICs by blade. Not best practices, but we have only two switches Cisco 3020 inside.  The two uplink physical NIC is paired in the same vSwitch.  (No iSCSI does fortunately).

  So the Catch 22 question is as follows:

  If the id VLAN native set up on the switch port, DHCP works of course and the VMware boot loader is able to grasp a binary / packets on the network (FTP Site) and install OK.  But after no installation, no communication with SC unless I set the VLAN id of the SC to '0 '.  The value "4" 0 does not communication, but "40" is the VLAN native.

  If id configuring VLAN native retired from the Switch port, DHCP will not work and host does not have IP address during the VMware boot process.  This is as expected as traffic without label is not assigned an eligible

  VLAN, so no comms.

  The Port of the Switch configuration:

  interface GigabitEthernet0/16

  SERVERNAME description

  switchport trunk encapsulation dot1q

  switchport trunk vlan native 40

  switchport trunk allowed vlan 40-254

  switchport mode trunk

  switchport nonegotiate

  Speed 1000

  No cdp enable

  spanning tree portfast trunk

  end

  Summary

  OK, let's summarize where things are and if possible please attach responses to their digital identity.

  (1) is there a way to delete the VLAN tagging altogether side ESX host? Not only the id '0 '. The problem is with clearly with the VLAN native defined as "40".  If "40" IDs specified on the Group of ports for the Service Console, no joy, no comms. If the id of '0' value, capable of ping gateway and communicate on the network.

  (2) what is the problem with the definition of VLAN native as "40" when the config for the switch port is set as VLAN native "40"?  Or if it was a problem?  Both parameters clearly do not work together.

  (3) a switch receiving a unmarked frame it will assign to the VLAN Trunk native. Ok. Trunking bases and why I need a VLAN specified on the port for DHCP native work.  But it seems that since the id VLAN is set manually even as VLAN native, closed communications and no traffic as possible.

  (4) executives made tag 802. 1 q VLAN native?  I think that it is not and this could well be the problem. Since the id VLAN "40" is not labeled, but try to score the side host vSwitch port group.

  Please let me know your thoughts, community and how in general, we are approaching 2 NIC ESX configurations.

  When trunking multiple VLANs, you either have a default VLAN is nothing is tagged, or you don't.  That's what the vlan native to you, it defines which VLAN would be used if no tag is visible on the packets traversing the network.  For servers, if you are marking, then everything has to tag, if you're not marking at the server level, then the port must be either an access port or a VLAN native or default must be set.  I also don't keep your service console the same network as your vm.  Keep this isolated for the security of the network.  If you isolate this VLAN, you can separate and use a single IP address for installation and one for post construction.

  Or, you can provide an IP address during the build.

  -KjB

  VMware vExpert

• Light client T520: t520 - how to disable the 'hp' splash screen at boot...

  Hello

  We just bought some HP t520s to complete a lab that we t510s.  The t510s work very well.  The t520s are almost here.  I just need to hide a pesky startup screen.  When the t520 marketing and gets to the GUI, but before that the network is connected, it displays a splash screen telling me that his "waitting for the network.  Unfortunately, this splash screen also has a button called "network settings."  This button, this bad boy is what I want to disable delete or hide.  I don't care if the start screen appears or not, but in giving users access to network settings and host name and all sorts of settings is a waitting accident to happen.

  Does anyone have any ideas as to how I can get rid of this button?  I would really appreciate hints, ideas, comments or words of wisdom on this topic.

  Thanks to you all!

  René

  Try the following: in xterm type regeditor, go to config-Assistant, enablenetworkcheck the value 0, enableupdatecheck the value 0, the network/update dialog box will not be displayed. You must type the value in the value dialog box and click on save before you go to the following registry key. If this does not work as expected please open a case with www.hp.com/go/support

• Client desktop Configuration DEFAULTS profile

  Now, I use x 1 WinServer2008 as ad server and x 3 Windows XP sp3 as the clients.

  Now I am trying configure clients to have the same each time the logon desktop profile (position of the icon, the taskbar configuration)

  Please please advise how to do this.

  Hi NattapongMaikeaw,

  The question you have posted is better suited in the TechNet Forums. Please visit the link mentioned to learn more below.

  Windows XP IT Pro category

• Client pix VPN how to authenticate with Active Directory

  Hi all, I've just set up my first Client VPN on a Cisco PIX. Everything works very well so that hitting the correct subnet and logon. However, I would like to see how I can get my connection of remote users with there active directory accounts. Right now I use the local connection for the pix for testing purposes. Sounds easy, but I'm missing something

  We use:

  Cisco Pix 515E version 6.3 (3)

  Thank you

  Dan

  Unfortunately the PIX 6.3.3 version does not support Active Directory authentication. V6.3.3 PIX only supports authentication to the server database, radius, and Ganymede local PIX.

  If you want to authenticate to active directory, it is support for PIX v7.x go.

  Here are the different types of authentication support for PIX v7.x leave for your reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa70/configuration/guide/AAA.html

  Hope that answers your question.

• update so on different WiFi router and now my Airport base station has a yellow light flashing - how to reset the base station

  Light Flsahing Amber on my Airport base station

  A persistent, flashing amber light indicates that one of the conditions is possible more may require your attention:

  • The base station has not yet been configured, because it's new or reset switch has been set.
  • You have chosen a security configuration that is not recommended.
  • Among several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.

  (Ref: AirPort base stations: status of base station on airport (LED))

  To find out why your base station status led is orange flashing:

  • Open AirPort Utility
  • Click on the AirPort base station
  • Look for the Status parameter in the small window that appears
  • Click on the little orange dot here and another window will open to explain what might be the 'question '.

• HP t620 Flexible Thin Client: Windows 10 IoT Ent. Client light-load Multi Touch

  Customers light t620 (Std/MORE) running 'Windows 10 IoT Enterprise for Thin Clients' supported multi touch? Or alone only?

  Having a hard time finding a definitive answer online.

  Thank you

  The answer is Yes.

  See Page 5... http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04312126.PDF

  "Smooth, immersive experience with technologies like advanced multi-touch and Windows® 10 applications"

  -Keith

• HP Officejet Pro 8610: Unclear Instructions online, using the phone fax configuration, how to print envelopes

  Terminology used in the instructions I'm not familiar with.

  Hi @chazz85,

  I'd be more than happy to help you with your configuration envelopes and printing of fax.

  Are there specific terminology that you want me to explain?

  Let's start with the implementation of the fax machine.

  The best market-well because it is in this document to set up a new Fax.

  For me to simplify this configuration for you, I would need to learn more about the installation of your home Tel/fax line.

  • Is he a dedicated phone line? Only used for faxing.
  • Or is it a shared phone line? Phone and Fax.
  • Is your analog phone provider (typical telephone lines) or digital? (Cable connection)

  If the row is shared;

  • You have the distinctive ring service? 2 numbers, same phone line that present different ringtone profiles to indicate the type of incoming call
  • You have an answering machine? An answering voice calls in the same phone number you use for fax calls.
  • You have voicemail? A subscription to voicemail service using the same phone number as the fax.

  The (Simplified) recommended configuration would be;

  1. Telephone jack in the wall (RJ11) connected to line 1 on the printer using the cable provided in the box with the printer

     Then, if any;

  2. Port 2 - EXT on the back of the printer connected to the answering machine (using a phone cable)
  3. Your phone will then connect on the answering machine (once again using any phone cable)

  Once I have more information about your setup I can help you further.

  Now for printing the envelope.

  I recommend the user to the 8610 Guide to show you how to correctly load an envelope. I copied the steps here for you;

  NOTE: If your printer has a second tray (tray 2), do not insert the envelopes for printing in this slot.

  1. remove the main input tray. Remove all existing paper from the tray.

  

  2. Insert the envelopes facing print down and charge according to the chart. Make sure that the stack of envelopes does not exceed the lower line of the marking in the status bar. For more information, see the diagram engraved in the status bar.

  

  NOTE: Do not load envelopes while the printer prints.

  3. slide the paper width guides in the tray until they touch the edge of the stack of envelopes, then re-insert the tray.

  

  4. remove the output tray extension until the planned paper size is reached.

  

  I need to know what program you are trying to print from. If it's Microsoft Word, I find this document print an envelope very useful.

  If it's another program, you can try the manual suggests.

  1 load the envelopes face to print down in the status bar.

  2. in the menu file in your software, click print.

  3. make sure that your printer is selected.

  4. click on the button that opens the Properties dialog box. Depending on your software application, this button can be called properties, Options, configure the printer, printer, printer or preferences.

  5. Select the appropriate options.

  • Under the layout tab, select Portrait orientation or landscape .
  • On the paper/quality tab, select the paper type appropriate media drop-down list in the area of selection of the status bar, and then select the appropriate, print quality in the quality settings area.
  • Click on the Advanced button in the paper/output box, select the size of paper in the paper size drop-down list.

  6. click OKand then click print or OK in the print dialog box.

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• PIX-to-client VPN and how to reach on other interfaces systems

  Hi all

  I've implemented a Pix-to-Client VPN and it seems works ok.

  As you can see, customer gets the same inside the class address (192.168.100.x) so I can reach across systems.

  My questions are:

  If I give different subnet pool addresses, how can 1 I still reach inside systems?

  2 if I have other systems on these interfaces such dmz1 (192.168.10.0) dmz2 (192.168.20.0) how to get to these systems of the

  even the client vpn access?

  Concerning

  Alberto Brivio

  IP local pool vpnpool1 192.168.100.70 - 192.168.100.80

  access-list 102 permit ip 192.168.100.0 255.255.255.0 192.168.100.0 255.255.255.0

  NAT (inside) - 0 102 access list

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp - esp-md5-hmac trmset1

  Crypto-map dynamic map2 10 set transform-set trmset1

  map map1 10 ipsec-isakmp crypto dynamic map2

  map1 outside crypto map interface

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address vpnpool1 pool test

  vpngroup split tunnel 102 test

  vpngroup test 1800 idle time

  test vpngroup password *.

  It is generally preferable to use another range of IP addresses. The PIX will know that the VPN Client uses that vary and route it properly whitch is not the case when you are using the same IP range as the inside interface.

  To access another interface use the SHEEP (your ACL 102) access list which disables NAT between the VPN and the neworks to which you want to connect.

  Example of config:

  access-list allowed SHEEP Internalnet ISubnetMask VPN-pool 255.255.255.0 ip

  access-list allowed SHEEP DMZnet DMZSubnetMask VPN-pool 255.255.255.0 ip

  NAT (inside) 0 SHEEP

  AAA-server local LOCAL Protocol

  AAA authentication secure-http-client

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS

  Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS

  card crypto 65535 REMOTE ipsec-isakmp dynamic outside_dyn_map

  REMOTE client authentication card crypto LOCAL

  interface card crypto remotely outside

  ISAKMP allows outside

  ISAKMP identity address

  ISAKMP nat-traversal 20

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 3des encryption

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  IP pool local VPNPool x.y.z.1 - x.y.z.254

  vpngroup VPNGroup address pool VPNPool

  vpngroup VPNGroup dns-server dns1 dns2

  vpngroup VPNGroup default-domain localdomain

  vpngroup idle 1800 VPNGroup-time

  vpngroup VPNGroup password grouppassword

  username, password vpnclient vpnclient-password

  sincerely

  Patrick

• Web client - System Configuration node displays 'Unknown' for the Uptime and the workload, no value for IP & Hostname

  When I connect on our vCenter 6 Update 1 device (embedded PSC) via the Web Client with integrated Active Directory ID, select "System Configuration", then select the node for vCenter, summary screen displays all the information IP or host name.  In addition, the status of availability and workload for storage/memory/swap/load of work view all 'unknown '.  See attached photo for reference.

  All values under management-> settings are also empty.

  When I login with [email protected], all the above values are displayed and I can change the settings of the device of vCenter as expected.  This made me suspect a permission problem exists, but I cannot know what SSO group to add our AD is less to enable management or control of the aircraft from vCenter for that it works as expected.

  Already tried to add our accounts to the following groups in SSO under the vsphere.local domain:

  DCAdmins

  SystemConfiguration.Administrators

  ComponentManager.Administrators

  Directors

  This information on the purpose of each group unfortunately did not help me understand which could apply:

  Groups in the field of vsphere.local

  Thank you very much for the help!

  I just did some digging on this myself (we deployed now U2 6.0) after I tried the same things (adding AD users in the SSO domain groups, etc. etc.) without success.

  What I have found is that it is simply a WELL-KNOWN PROBLEM with 6.0 U2 and maybe they'll fix with U3 6.0 when that comes out (later this summer)?  Maybe it'll be 6.5 at that time, with an announcement to the VMworld 2016 or something - who knows.

  The workaround is a joke--suggesting the deployment using only the SSO domain by default.  Well, which is never going to happen naturally, so he says as a workaround is, if you really need to get and display status, etc. from the web client, you simply connect with your [email protected] account that was created at the initial time of installation.

  VMware vCenter Server 6.0 Update 2 Release Notes

  *****

  Failed to configure and view information about the vCenter Server Appliance by using the System Configuration page in the Web Client vSphere with errors
  Connect to the instance of vCenter server in the vCenter Server Appliance with a user who is located in a custom name (different from the default vsphere.local) Single Sign-On the field by using the Web Client vSphere. On the vSphere Web Client home page, click on the System Configuration and select nodesunder the System Configuration. If you try to change the settings, restart or power off a node of the vCenter Server Appliance, the operation fails with one of the following errors: An internal error has occurred - Error # 1009 and Not authorized to use this API . If you click on the summary, monitoror Manage tabs, some device information cannot be displayed.

  Workaround: deploy the vCenter Server Appliance by using the domain of Single Sign-On by default: vsphere.local.

• VSphere client light web - cannot select boot from ISO via the CD/DVD drive

  I had used P2v to virtualize a Windows 7 machine and after the start he said that the "the boot selection failed because a required device is inaccessible. I think I need to run a repair using Windows 7 image and possibly launch a fixboot and fixmbr, but when I try to adjust the settings of the virtual machine using the web client to boot from the ISO it displays an error and the ok button to save the settings is grayed out. How is it doesn't let me do this?

  Never mind. I got the VM running in Vsphere client while trying to change the setting in the web client.

• vSphere Client Plugins Web - how to debug the Flex INTERFACE

  Hello:

  It seems that, in order to develop, Flex at base of plugins using the vSphere Client Plugins SDK Web and get 'full integration', the developer is encouraged to use a MVC framework which is part of the SDK. In addition, I see things that seem to indicate that, once the plugin is runing in the context of the VC, actions will be triggered by the context running, etc...

  It may seem that in order to develop a base Plugin, the user interface must be developed, compiled and deployed each time.

  How should we do about writing a typical user interface application where the developer is able to set breakpoints, etc...? I can do it now if I do not use the hooks of VmWare, such as previously mentioned, but what if I wanted to exploit the pegs supplied?

  Thanks in advance for the help.

  Have you read the SDK documentation in questions before asking your new question?

  Debugging of all is possible.

• Client/server JavaFX, how FX can do server-side?

  So I am ultimately design a client/server application. Now, I'm curious to know how FX itself can do.
  
  I know that Java EE is the server side of the platform, while that for the client side (right or...?) so I was curious to know how FX fits inside, just like a RIA (Rich Internet Application).
  
  I have seen examples such as the application of DataApp that uses the resources of the ERA with JavaFX, so I'm curious to know how, if any, limitations exist for FX.
  
  
  The reason I ask is because I'm trying to know where to start with EE and there is so much information it is overwhelming, and I have no idea where to start. It seems that there are a ton of "JSR" for different tasks, and I don't know exactly what I need and that, so I'm really confused: (all.
  
  Any ideas of how I should go about it would be appreciated.
  
  Thank you
  
  ~ KZ

  Ignore the JSR for now.

  Follow the JavaEE tutorial.
  http://docs.Oracle.com/javaee/6/tutorial/doc/

  The answers to many of your questions will be clear to you when you've completed the tutorial.
  -----------------
  I also like the tutorials here (they are a little dated, but still topical for most as the core of JEE6 specifications that the tutorial relies on have been released 5 years ago and JEE7 has yet to be published).
  https://Schuchert.wikispaces.com/EJB+3+and+Java+Persistence+API
  ------------
  zonski has a targeted spring + javafx tutorial if you prefer to learn and to use spring than JEE (they are different technologies, which cover roughly the same functional game):
  http://www.zenjava.com/series/building-JEE-applications-in-JavaFX-2-0/
  -----------------
  JavaFX is a setting aside of client, so there is not a lot that you would do with it on the side server.
  ----------------

  It seems that there are a ton of "JSR" for different tasks, and I don't know exactly what I need and that, so I'm really confused all

  Nobody needs JEE, just use the pieces that you want that are a good target for any project you do - do not try to use everything at once.
  Many things can be learned and used on its own.

  Some relevant topics, perhaps (in the order I would consider them):

  Persistence: http://docs.oracle.com/javaee/6/tutorial/doc/bnbpy.html
  Java Servlet technology: http://docs.oracle.com/javaee/6/tutorial/doc/bnafd.html
  Web services JAX - RS: http://docs.oracle.com/javaee/6/tutorial/doc/giepu.html
  Contexts and Dependency Injection: http://docs.oracle.com/javaee/6/tutorial/doc/gjbnr.html
  Enterprise Beans: http://docs.oracle.com/javaee/6/tutorial/doc/bnblr.html