Client VPN Cisco 1811 & Shrewsoft 2.10

Similar Questions

• Client VPN Cisco router Cisco, MSW CA + certificates

  Dear Sirs,
  Let me approach you on the following problem.

  I wanted to use a secure between the Cisco VPN client connection
  (Windows XP) and Cisco 2821 with certificate-based authentication.
  I used the Microsoft certification authority (Windows 2003 server).
  Cisco VPN client used eTokenPRO Aladdin as a certificate store.

  Certificate of MSW CA registration and implementation in eToken ran OK
  Customer VPN Cisco doesn't have a problem with the cooperation of eToken.
  Certificate of registration of Cisco2821 MSW ca ran okay too.

  Cisco 2821 configuration is standard. IOS version 12.4 (6).

  Attempt to connect to the client VPN Cisco on Cisco 2821 was
  last update of the error messages:

  ISAKMP: (1020): cannot get router cert or routerdoes do not have a cert: had to find DN!
  ISAKMP: (1020): ITS been RSA signature authentication more XAUTH using id ID_FQDN type
  ISAKMP (1020): payload ID
  next payload: 6
  type: 2
  FULL domain name: cisco - ca.firm.com
  Protocol: 17
  Port: 500
  Length: 25
  ISAKMP: (1020): the total payload length: 25
  ISAKMP (1020): no cert string to send to peers
  ISAKMP (1020): peer not specified not issuing and none found appropriate profile
  ISAKMP (1020): Action of WSF returned the error: 2
  ISAKMP: (1020): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
  ISAKMP: (1020): former State = new State IKE_R_MM5 = IKE_P1_COMPLETE

  Is there some refence where is possible to find some information on
  This problem? There is someone who knows how to understand these mistakes?
  Thank you very much for your help.

  Best regards
  P.Sonenberk

  PS Some useful information for people who are interested in the above problem.

  Address IP of Cisco 2821 10.1.1.220, client VPN IP address is 10.1.1.133.
  MSW's IP 10.1.1.50.
  Important parts of the Cisco 2821 configuration:

  !
  cisco-ca hostname
  !
  ................
  AAA new-model
  !
  AAA authentication login default local
  AAA authentication login sdm_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization sdm_vpn_group_ml_1 LAN
  !
  ...............
  IP domain name firm.com
  host IP company-cu 10.1.1.50
  host to IP cisco-vpn1 10.1.1.133
  name of the IP-server 10.1.1.33
  !
  Authenticated MultiLink bundle-name Panel
  !
  Crypto pki trustpoint TP-self-signed-4097309259
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 4097309259
  revocation checking no
  rsakeypair TP-self-signed-4097309259
  !
  Crypto pki trustpoint company-cu
  registration mode ra
  Enrollment url http://10.1.1.50:80/certsrv/mscep/mscep.dll
  use of ike
  Serial number no
  IP address no
  password 7 005C31272503535729701A1B5E40523647
  revocation checking no
  !
  TP-self-signed-4097309259 crypto pki certificate chain
  certificate self-signed 01
  30820249 308201B 2 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
  .............
  FEDDCCEA 8FD14836 24CDD736 34
  quit smoking
  company-cu pki encryption certificate chain
  certificate 1150A66F000100000013
  30820509 308203F1 A0030201 02020 HAS 11 092A 8648 01000000 13300 06 50A66F00
  ...............
  9E417C44 2062BFD5 F4FB9C0B AA
  quit smoking
  certificate ca 51BAC7C822D1F6A3469D1ADC32D0EB8C
  30820489 30820371 A0030201 BAC7C822 02021051 D1F6A346 9D1ADC32 D0EB8C30
  ...............
  C379F382 36E0A54E 0A6278A7 46
  quit smoking
  !
  ...................
  crypto ISAKMP policy 30
  BA 3des
  md5 hash
  authentication rsa-BA
  Group 2
  ISAKMP crypto identity hostname
  !
  Configuration group customer isakmp crypto Group159
  key Key159Key
  pool SDM_POOL_1
  ACL 100
  !
  the crypto isakmp client configuration group them
  domain firm.com
  pool SDM_POOL_1
  ACL 100
  !
  Crypto ipsec transform-set esp-3des esp-md5-hmac 3DES-MD5
  !
  crypto dynamic-map SDM_DYNMAP_1 1
  the transform-set 3DES-MD5 value
  market arriere-route
  !
  card crypto SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
  map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto
  client configuration address map SDM_CMAP_1 crypto answer
  map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
  !
  ................
  !
  end

  status company-cu of Cisco-ca #show cryptographic pki trustpoints
  Trustpoint company-cu:
  Issuing CA certificate configured:
  Name of the object:
  CN = firm-cu, dc = company, dc = local
  Fingerprint MD5: 5026582F 8CF455F8 56151047 2FFAC0D6
  Fingerprint SHA1: 47B 74974 7C85EA48 760516DE AAC84C5D 4427E829
  Universal router configured certificate:
  Name of the object:
  host name = cisco - ca.firm.com
  Fingerprint MD5: E78702ED 47D5D36F B732CC4C BA97A4ED
  Fingerprint SHA1: 78DEAE7E ACC12F15 1DFB4EB8 7FC DC6F3B7E 00138
  State:
  Generated keys... Yes (general purpose, not exportable)
  Authenticated issuing certification authority... Yes
  Request certificate (s)... Yes

  Cisco-ca #sh crypto pubkey-door-key rsa
  Code: M - configured manually, C - excerpt from certificate

  Name of code use IP-address/VRF Keyring
  C Signature name of X.500 DN default:
  CN = firm-cu
  DC = company
  DC = local

  C signature by default cisco-vpn1

  IMPORTANT: I don't have a Cisco IOS Software: 12.4 (5), 12.3 (11) T08, 12.4 (4.7) PI03c,.
  12.4 (4.7) T - there is error in the cryptographic module.

  Hey guys, it's weird that the router is not find cert after IKE is the cert and validates, it is certainly not reason, but I would go ahead and set up the mapping of certificate on this router to force the client to associate with Group of IKE, for that matter, that you need to change your config a bit for use iskamp profiles :

  http://www.Cisco.com/en/us/docs/iOS/12_3t/12_3t8/feature/guide/gt_isakp.html

• Remote access VPN Cisco 1811

  Hi forum

  My question is very simple. At my office, we have a Cisco 1811 router that is connected to our internal network. Dialer0 is connected to our ISP. We have an IPSEC tunnel running between one of the branches to a different place. Our 1811 is not a mainstream, and we have another firewall for remote users. But the problem is one of the workstations is a MAC book wouldn't connect to our firewall so I had him put through 1811 to access internal resources.

  Since I am under an IPSEC tunnel on the interface dialer0 how to configure VPN Client Access and how I map it to the dialer interface.

  Your help is greatly appreciated

  Thank you

  Attached, is an example of configuration that you can use to serve the site-site static and dynamic remote access on the same router.  Please let me know if you have any specific questions.

• Client Vpn Cisco vpn remote site inaccessible (one site to another)

  Hello

  I configured two vpn with pix 515 cisco connection. One using a cisco vpn client and another another site to site vpn connectin with other pix.

  I have my local network with 192.168.149.0 network, vpn clinet pool with 192.168.17.0 network and a remote site with 192.168.145.0.

  Client vpn local network accessible and always remote site, but 192.168.17.0 (vpn client) 192.168.145.0 not accessible (remote site).

  Plese help me!

  Thank you

  This scenario is possible with no v6.x, v7.x

  the link below is an example of configuration:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

• What clients VPN Cisco 2811 supports?

  Is the solution of VPN Cisco 2811 locked customers cisco or that market with other brands too?

  Best regards Tommy Svensson

  Hello

  With the correct IOS feature set, it will support IPsec VPN clients. This includes not only the Cisco VPN client but almost any standard IPsec client.

  In addition, if on the 2811 can accept any browser SSL VPN connections, or even use the AnyConnect SSL client.

  It will be useful.

  Federico.

• Client VPN Cisco ASA 5505 Cisco 1841 router

  Hello. I'm doing a connection during a cisco vpn client and a vpn on one server asa 5505 behind a 1841 router (internet adsl2 + and NAT router).

  My topology is almost as follows

  customer - tunnel - 1841 - ASA - PC

  ASA is the endpoint vpn (outside interface) device. I forward udp port 500 and 4500 on my router to the ASA and the tunnel rises. I exempt nat'ting on the asa and the router to the IP in dhcp vpn pool. I can connect to my tunnel but I can't "see" anything in the internal network. I allowed all traffic from the outside inwards buy from the ip vpn pool and I still send packets through the tunnel and I get nothing. I take a look at the statistics on the vpn client and I 2597 bytes (ping traffic) and there are no bytes. Any idea?

  Where you you logged in when you took the "crypto ipsec to show his"? If this isn't the case then try again, also this option allows IPSEC over UDP 4500 and it is disabled, enable it.

  ISAKMP nat-traversal crypto

  Just enter the command as it is, then try to connect again after activation of this option and get the same result to see the.

• Client VPN CISCO ASA for Android

  Hi guys

  I just received a request from a client who said he expects the procedure to establish a VPN from an Android device, as far as I know there is a soft ANYCONNECT but in my case, the client uses a CISCO VPN CLIENT, in this case it is possible to configure a VPN connection on the device, or I should use ANYCONNECT?

  Kind regards.

  Connection via the android client will be like the legacy cisco VPN client connection. You need only anyconnect mobile licenses if you connect with the android anyconnect client.  Using the android client built in will consume licenses peer IPSEC. If no additional license not required.

• client vpn Cisco pix 501

  I wonder and wonder, is it possible for a branch (2 vpn clients) to connect to the central location (cisco 501 pix) at the same time via the vpn client with a public address on each side. If this is not the case, what will be the way to make it work without additional equipment (another pix of cisco).

  Yes you can, you should check your os 6.3 a pix and you enable nat-transapency: -.

  ISAKMP nat-traversal 20

• Cannot install the Client VPN Cisco due error 1722

  Dear,

  I went to istall the Cisco VPN Client SW. But my laptoop installation finished with error 1722. Here is the log file fagment:

  MSI (s) (74:B0) [12:07:23:006]: product: Cisco Systems VPN Client 5.0.07.0440 - error 1722. There is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package.  Action CsCaExe_VAInstall, location: C:\Program Files (x 86) \Cisco Systems\VPN Client\VAInst64.exe, command: nopopup I "C:\Program Files (x 86) \Cisco Client\Setup\CVirtA64.inf" CS_VirtA

  I use Windows 7 Home Premium on my laptop, the UAC turned OFF and the antivir SW is uninstalled. I searched on the net but I do not find a satisfactory solution.

  Please someone knows how can I fix this?

  Thank you

  Milan

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information is useful.

• Client VPN Cisco and Cisco Secure

  Cisco VPN client and the VPN from Cisco Secure client free to use with pix firewall software?

  Thank you.

  Hello

  If you have a valid contract to Cisco and you can get the following link:

  http://www.Cisco.com/Kobayashi/SW-Center/SW-VPN.shtml

  with your CCO login, then you should be able to use these customers at no cost because they are already covered by the contract.

  Thank you and best regards,

  Abdelouahed

  -=-=-

• Preconfigure the client VPN Cisco 5.0 for 2000/XP/Vista

  I tried to configure the Cisco VPN client to load into a predefined area but also accept my .pcf files. I tried the old oem.ini file and even the vpnclient.ini.

  I don't find any documentation about this version and I was wondering if somebody already did.

  Thank you

  DWane

  Hi Sylvie,.

  Yes, we just default to the Cisco VPN Client directory - partly because it is easier, but also that we don't end up with more than one VPN on a computer directory, if someone had installed earlier.

  For the package that I did last week, I happened to use Vista "send to: compressed (zipped) folder" command, although any Zip program should work. Then I used WinZip Self-Extractor to make the Zip file into an EXE file. WinZip IS - and I think that this must be true for some of the free/shareware Zip-> Exe programs too - lets you display messages at various times during installation, which is nice: you can put an alert saying from the start who should use this version of the client, then a message more later saying that for contact problems , or give a pointer to the file ReadMe.txt, that sort of thing.

  Best wishes

  Clare

• Client VPN CISCO 857

  Hello

  I would like to know if CISCO 857 allows customers of Cisco VPN remote apart from site to site VPN software. I have heard that all cable cisco VPN devices allow connections to cisco VPN client software, is it true?

  Thanks a lot for your help

  Juan Manuel

  Juan,

  Let me explain a little further in order to clarify some of the terminology used, which could lead to confusion.

  Router Cisco VPN may terminate the following types of tunnels.

  Lan to Lan tunnels has.

  b. dynamic tunnels of Lan to Lan

  c. connections from VPN clients

  d. ends for easy VPN clients

  a & b are very similar

  c & d are very similar

  except - option c uses VPN (software) clients installed on the PC or MAC systems

  Option d, material uses to connect to the IOS routers. You can use a router or a PIX firewall or a 3002 or ASA to connect to the Cisco router that would act as an IOS Easy VPN server. But the device to connect to the easy VPN server is called an easy VPN client.

  Hope that explains the terminology a little more in detail.

  To answer your question, safety feature Easy VPN client and server support.

  And what you're trying to accomplish is option c. Thus, security feature option should work well for you.

  Hope that explains your queries.

  The rate of this post, if that helps!

  Thank you

  Gilbert

• client vpn Cisco router cisco 880 - Private ip addresses is not only the public ip

  Experts,

  I have an interesting question, I am able to authenticate and connect to my to my Cisco880K9 router cisco vpn client.

  My internal network is: 10.10.1.0

  My Pool of IP VPN is: 10.10.2.2 - 10.10.2.250

  My external Public ip address is: 192.198.46.14

  When I connect with my vpn client I get my vpn 10.10.2.2 pool address.

  IF I ping my server 10.10.1.2 I get a response from my public IP address.

  Example:

  Ping 10.10.1.2 with 32 bytes of data:

  Reply from 192.198.46.14: bytes = 32 time = 45ms TTL = 127

  Reply from 192.198.46.14: bytes = 32 time = 50 ms TTL = 127

  Reply from 192.198.46.14: bytes = 32 time = 42ms TTL = 127

  Reply from 192.198.46.14: bytes = 32 time = 45ms TTL = 127

  I enclose my config file. It's almost a copy from the following link:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801c4246.shtml

  Thanks for the help

  Please please configure NAT exemption as follows:

  access-list 120 deny ip 10.10.1.0 0.0.0.255 10.10.2.0 0.0.0.255

  access-list 120 allow ip 10.10.1.0 0.0.0.255 any

  IP nat inside source interface FastEthernet4 list 120 overload

  no nat ip within the source list 1 interface FastEthernet4 overload

  Then, disable the translation: claire ip nat trans *.

• site to site vpn cisco 1811

  Hi guys

  Two sites are on connection MPLS and things work fine. Is now looking to connect a second ISP and create a failover site-to-site VPN. If the main ISP goes down (in the case of a power failure full at the ISP level which is unlikely, but just in case) then MPLS should failover site to site VPN which will be completely on a different secondary ISP. Can someone provide me with options as if I have to use ospf, bgp and ip sla? If the follow-up involved how can I follow the MPLS? is it even that track just interface or any special routing required? etc and... your help is greatly appreciated... Thank you...

  Hello

  It actually depends on what is already at work.

  I usually do with IP SLA is not running Routing Protocol, OSPF, BGP are always my first option.

  IP SLA parameters should be the same, just point to an available IP address accessible through the main connection and follow your routes using this instance.

  In terms of VPN, make sure the encryption card is on the secondary interface, and it should do.

  HTH.

  Portu.

  Please note all useful messages.

• Several sessions the client VPN Cisco PIX (v.7.2)

  When we are connect to the PIX from our local supplier (all sessions have an address using a NAT) all sessions are connected, but first of all runs successfully, others are connected only but for example without routing.

  Thanks for the help in advance.

  J.

  It looks like NAT traversal issue

  You can try to order

  Crypto isakmp nat-traversal 20

  on pix

  M.

  Hope that helps the rate if it isn't