Client VPN Cisco ASA 5505 Cisco 1841 router
Hello. I'm doing a connection during a cisco vpn client and a vpn on one server asa 5505 behind a 1841 router (internet adsl2 + and NAT router).
My topology is almost as follows
customer - tunnel - 1841 - ASA - PC
ASA is the endpoint vpn (outside interface) device. I forward udp port 500 and 4500 on my router to the ASA and the tunnel rises. I exempt nat'ting on the asa and the router to the IP in dhcp vpn pool. I can connect to my tunnel but I can't "see" anything in the internal network. I allowed all traffic from the outside inwards buy from the ip vpn pool and I still send packets through the tunnel and I get nothing. I take a look at the statistics on the vpn client and I 2597 bytes (ping traffic) and there are no bytes. Any idea?
Where you you logged in when you took the "crypto ipsec to show his"? If this isn't the case then try again, also this option allows IPSEC over UDP 4500 and it is disabled, enable it.
ISAKMP nat-traversal crypto
Just enter the command as it is, then try to connect again after activation of this option and get the same result to see the.
Tags: Cisco Security
Similar Questions
-
connect Cisco VPN client v5 to asa 5505
I have remote vpn configuration issues between ASA5505 and Cisco VPN client v5. Successfully, I can establish a connection between the client Vpn and ASA and receive the IP address of the ASA. Statistical customer VPN windows shows that packets are sent and encrypted but none of the packages is received/decrypted.
Cannot ping asa 5505
Any ideas on what I missed?
Try adding...
ISAKMP nat-traversal crypto
In addition, you cannot ping the inside interface of the ASA vpn without this command...
management-access inside
Please evaluate the useful messages.
-
Client VPN Cisco router Cisco, MSW CA + certificates
Dear Sirs,
Let me approach you on the following problem.I wanted to use a secure between the Cisco VPN client connection
(Windows XP) and Cisco 2821 with certificate-based authentication.
I used the Microsoft certification authority (Windows 2003 server).
Cisco VPN client used eTokenPRO Aladdin as a certificate store.Certificate of MSW CA registration and implementation in eToken ran OK
Customer VPN Cisco doesn't have a problem with the cooperation of eToken.
Certificate of registration of Cisco2821 MSW ca ran okay too.Cisco 2821 configuration is standard. IOS version 12.4 (6).
Attempt to connect to the client VPN Cisco on Cisco 2821 was
last update of the error messages:ISAKMP: (1020): cannot get router cert or routerdoes do not have a cert: had to find DN!
ISAKMP: (1020): ITS been RSA signature authentication more XAUTH using id ID_FQDN type
ISAKMP (1020): payload ID
next payload: 6
type: 2
FULL domain name: cisco - ca.firm.com
Protocol: 17
Port: 500
Length: 25
ISAKMP: (1020): the total payload length: 25
ISAKMP (1020): no cert string to send to peers
ISAKMP (1020): peer not specified not issuing and none found appropriate profile
ISAKMP (1020): Action of WSF returned the error: 2
ISAKMP: (1020): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
ISAKMP: (1020): former State = new State IKE_R_MM5 = IKE_P1_COMPLETEIs there some refence where is possible to find some information on
This problem? There is someone who knows how to understand these mistakes?
Thank you very much for your help.Best regards
P.SonenberkPS Some useful information for people who are interested in the above problem.
Address IP of Cisco 2821 10.1.1.220, client VPN IP address is 10.1.1.133.
MSW's IP 10.1.1.50.
Important parts of the Cisco 2821 configuration:!
cisco-ca hostname
!
................
AAA new-model
!
AAA authentication login default local
AAA authentication login sdm_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization sdm_vpn_group_ml_1 LAN
!
...............
IP domain name firm.com
host IP company-cu 10.1.1.50
host to IP cisco-vpn1 10.1.1.133
name of the IP-server 10.1.1.33
!
Authenticated MultiLink bundle-name Panel
!
Crypto pki trustpoint TP-self-signed-4097309259
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 4097309259
revocation checking no
rsakeypair TP-self-signed-4097309259
!
Crypto pki trustpoint company-cu
registration mode ra
Enrollment url http://10.1.1.50:80/certsrv/mscep/mscep.dll
use of ike
Serial number no
IP address no
password 7 005C31272503535729701A1B5E40523647
revocation checking no
!
TP-self-signed-4097309259 crypto pki certificate chain
certificate self-signed 01
30820249 308201B 2 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
.............
FEDDCCEA 8FD14836 24CDD736 34
quit smoking
company-cu pki encryption certificate chain
certificate 1150A66F000100000013
30820509 308203F1 A0030201 02020 HAS 11 092A 8648 01000000 13300 06 50A66F00
...............
9E417C44 2062BFD5 F4FB9C0B AA
quit smoking
certificate ca 51BAC7C822D1F6A3469D1ADC32D0EB8C
30820489 30820371 A0030201 BAC7C822 02021051 D1F6A346 9D1ADC32 D0EB8C30
...............
C379F382 36E0A54E 0A6278A7 46
quit smoking
!
...................
crypto ISAKMP policy 30
BA 3des
md5 hash
authentication rsa-BA
Group 2
ISAKMP crypto identity hostname
!
Configuration group customer isakmp crypto Group159
key Key159Key
pool SDM_POOL_1
ACL 100
!
the crypto isakmp client configuration group them
domain firm.com
pool SDM_POOL_1
ACL 100
!
Crypto ipsec transform-set esp-3des esp-md5-hmac 3DES-MD5
!
crypto dynamic-map SDM_DYNMAP_1 1
the transform-set 3DES-MD5 value
market arriere-route
!
card crypto SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto
client configuration address map SDM_CMAP_1 crypto answer
map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
!
................
!
endstatus company-cu of Cisco-ca #show cryptographic pki trustpoints
Trustpoint company-cu:
Issuing CA certificate configured:
Name of the object:
CN = firm-cu, dc = company, dc = local
Fingerprint MD5: 5026582F 8CF455F8 56151047 2FFAC0D6
Fingerprint SHA1: 47B 74974 7C85EA48 760516DE AAC84C5D 4427E829
Universal router configured certificate:
Name of the object:
host name = cisco - ca.firm.com
Fingerprint MD5: E78702ED 47D5D36F B732CC4C BA97A4ED
Fingerprint SHA1: 78DEAE7E ACC12F15 1DFB4EB8 7FC DC6F3B7E 00138
State:
Generated keys... Yes (general purpose, not exportable)
Authenticated issuing certification authority... Yes
Request certificate (s)... YesCisco-ca #sh crypto pubkey-door-key rsa
Code: M - configured manually, C - excerpt from certificateName of code use IP-address/VRF Keyring
C Signature name of X.500 DN default:
CN = firm-cu
DC = company
DC = localC signature by default cisco-vpn1
IMPORTANT: I don't have a Cisco IOS Software: 12.4 (5), 12.3 (11) T08, 12.4 (4.7) PI03c,.
12.4 (4.7) T - there is error in the cryptographic module.Hey guys, it's weird that the router is not find cert after IKE is the cert and validates, it is certainly not reason, but I would go ahead and set up the mapping of certificate on this router to force the client to associate with Group of IKE, for that matter, that you need to change your config a bit for use iskamp profiles :
http://www.Cisco.com/en/us/docs/iOS/12_3t/12_3t8/feature/guide/gt_isakp.html
-
How to use Layer 2 Ports on the Cisco 1841 router switch
Hello
I use the Cisco 1841 router with a single port layer 3 Fe0 and 8 Ports switched.
I gave the IP on the Fe0 port which is connected to another router.
Now I don't know how to use Layer 2 of the router switch ports.
I tried to make one of the port as a Port of access by switchport mode access and connected my laptop and the same subnet given IP, but I can't ping my Fe0 IP port and vice versa, as I am also unable to ping my laptop router.
Can someone explain to me how to use these ports on layer 2?
Hi Muhammadatifmasood, take a look at the link below, I'm sure that you will find it useful.
https://supportforums.Cisco.com/discussion/10919631/how-enable-routing-b...
BenSamayoa
-
Error of customer Cisco VPN connection ASA 5505
I am unable to connect to the vpn I created on my ASA 5505 using the Cisco VPN Client on a Windows machine. The log of the vpn client and the config of the ASA 5505 is lower. Any help to solve this is appreciated.
CISCO VPN CLIENT LOG
Cisco Systems VPN Client Version 5.0.06.0160
Copyright (C) 1998-2009 Cisco Systems, Inc.. All rights reserved.
Customer type: Windows, Windows NT
Running: 6.1.7600
Config files directory: C:\Program Cisco Systems Client\
1 09:34:23.030 13/04/11 Sev = Info/4 CM / 0 x 63100002
Start the login process
2 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
3 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "71.xx.xx.253".
4 09:34:23.061 13/04/11 Sev = Info/6 IKE/0x6300003B
Attempts to establish a connection with 71.xx.xx.253.
5 09:34:23.061 13/04/11 Sev = Info/4 IKE / 0 x 63000001
From IKE Phase 1 negotiation
6 09:34:23.077 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) at 71.xx.xx.253
7 09:34:23.170 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
8 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">
9 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer is a compatible peer Cisco-Unity
10 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports XAUTH
11 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports the DPD
12 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports NAT - T
13 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports fragmentation IKE payloads
14 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000001
IOS Vendor ID successful construction
15 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) at 71.xx.xx.253
16 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000055
Sent a keepalive on the IPSec Security Association
17 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000083
IKE port in use - Local Port = 0xEB07, Remote Port = 0 x 1194
18 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000072
Automatic NAT detection status:
Remote endpoint is NOT behind a NAT device
This effect is behind a NAT device
19 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system
20 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system
21 09:34:23.186 13/04/11 Sev = Info/5 IKE/0x6300005E
Customer address a request from firewall to hub
22 09:34:23.186 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to 71.xx.xx.253
23 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
24 09:34:23.248 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
25 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 172.26.6.1
26 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.0.0
27 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 172.26.0.250
28 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 172.26.0.251
29 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000000
30 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = TLCUSA
31 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000
32 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (1) built by manufacturers on Wednesday 5 May 09 22:45
33 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001
34 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194
35 09:34:23.248 13/04/11 Sev = Info/4 CM / 0 x 63100019
Data in mode Config received
36 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000056
Received a request from key driver: local IP = 172.26.6.1, GW IP = 71.xx.xx.253, Remote IP = 0.0.0.0
37 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > QM ISAKMP OAK * (HASH, SA, NO, ID, ID) to 71.xx.xx.253
38 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
39 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">
40 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000045
Answering MACHINE-LIFE notify has value of 86400 seconds
41 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000047
This AA is already living from 0 seconds, setting the expiration to 86400 seconds right now
42 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
43 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">
44 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK INFO *(HASH, DEL) to 71.xx.xx.253
45 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000049
IPsec security association negotiation made scrapped, MsgID = 89EE7032
46 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000017
Marking of IKE SA delete (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED
47 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
48 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000058
Received an ISAKMP for a SA message no assets, I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8
49 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">
50 09:34:26.696 13/04/11 Sev = Info/4 IKE/0x6300004B
IKE negotiation to throw HIS (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED
51 09:34:26.696 13/04/11 Sev = Info/4 CM / 0 x 63100012
ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED". Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system
52 09:34:26.696 13/04/11 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
53 09:34:26.696 13/04/11 Sev = Info/6 CM / 0 x 63100046
Set indicator established tunnel to register to 0.
54 09:34:26.696 13/04/11 Sev = Info/4 IKE / 0 x 63000001
Signal received IKE to complete the VPN connection
----------------------------------------------------------------------------------------
ASA 5505 CONFIG
: Saved
:
ASA Version 8.2 (1)
!
ciscoasa hostname
domain masociete.com
activate tdkuTUSh53d2MT6B encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 172.26.0.252 255.255.0.0
!
interface Vlan2
nameif outside
security-level 0
IP address 71.xx.xx.253 255.255.255.240
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS server-group DefaultDNS
domain masociete.com
access-list LIMU_Split_Tunnel_List note the network of the company behind the ASA
Standard access list LIMU_Split_Tunnel_List allow 172.26.0.0 255.255.0.0
outside_access_in list extended access permit icmp any one
outside_access_in list extended access udp allowed any any eq 4500
outside_access_in list extended access udp allowed any any eq isakmp
outside_access_in list extended access permit tcp any host 71.xx.xxx.251 eq ftp
outside_access_in list extended access permit tcp any host 71.xx.xxx.244 eq 3389
inside_outbound_nat0_acl list of allowed ip extended access all 172.26.5.192 255.255.255.240
inside_outbound_nat0_acl list of allowed ip extended access all 172.26.6.0 255.255.255.128
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
local pool VPN_POOL 172.26.6.1 - 172.26.6.100 255.255.0.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0
static (inside, outside) 71.xx.xxx.251 172.26.5.9 netmask 255.255.255.255
static (inside, outside) 71.xx.xxx.244 172.26.0.136 netmask 255.255.255.255
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 71.xx.xxx.241 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
Enable http server
http 172.26.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
no basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interception
WebVPN
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of server WINS 172.26.0.250 172.26.0.251
value of 172.26.0.250 DNS server 172.26.0.251
Protocol-tunnel-VPN IPSec l2tp ipsec svc
value by default-field TLCUSA
internal LIMUVPNPOL1 group policy
LIMUVPNPOL1 group policy attributes
value of 172.26.0.250 DNS server 172.26.0.251
VPN-idle-timeout 30
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list LIMU_Split_Tunnel_List
the address value VPN_POOL pools
internal TLCVPNGROUP group policy
TLCVPNGROUP group policy attributes
value of 172.26.0.250 DNS server 172.26.0.251
Protocol-tunnel-VPN IPSec l2tp ipsec svc
Re-xauth disable
enable IPSec-udp
value by default-field TLCUSA
barry.julien YCkQv7rLwCSNRqra06 + QXg password user name is nt encrypted privilege 0
username barry.julien attributes
VPN-group-policy TLCVPNGROUP
Protocol-tunnel-VPN IPSec l2tp ipsec
bjulien bhKBinDUWhYqGbP4 encrypted password username
username bjulien attributes
VPN-group-policy TLCVPNGROUP
attributes global-tunnel-group DefaultRAGroup
address VPN_POOL pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
no authentication ms-chap-v1
ms-chap-v2 authentication
type tunnel-group TLCVPNGROUP remote access
attributes global-tunnel-group TLCVPNGROUP
address VPN_POOL pool
Group Policy - by default-TLCVPNGROUP
IPSec-attributes tunnel-group TLCVPNGROUP
pre-shared-key *.
ISAKMP ikev1-user authentication no
tunnel-group TLCVPNGROUP ppp-attributes
PAP Authentication
ms-chap-v2 authentication
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:b94898c163c59cee6c143943ba87e8a4
: end
enable ASDM history
can you try to change the transformation of dynamic value ESP-3DES-SHA map.
for example
remove the encryption scheme dynamic-map outside_dyn_map 20 transform-set TRANS_ESP_3DES_MD5
and replace with
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
-
Hello
I need to configure the vpn site to site on router cisco 1841, but the problem is that the router does not recognize the crypto comand.
R1 #conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1 (config) #crypto?
% Unrecognized command
R1 (config) #crypto?
% Unrecognized command
R1 (config) #c?
call call-history-mib id-carrier cdp
chat script class-card clock SNC
config-register connect plan control configurationR1 (config) #crypto isakmp policy 1
^
Invalid entry % detected at ' ^' marker.R1 #sh worm
Cisco IOS Software, 1841 (C1841-IPBASE-M), Version 12.4 (1 c), RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Updated Wednesday 25 October 05 17:10 by evmillerROM: System Bootstrap, Version 12.3 T9 (8r), RELEASE SOFTWARE (fc1)
the availability of CS-Khatlon-opio-01 is 2 days, 23 hours, 13 minutes
System returned to ROM of charging at 16:07:44 TJK Friday, November 7, 2014
System image file is "flash: c1841-ipbase - mz.124 - 1C.bin.Cisco 1841 (revision 6.0) with 114688K / 16384K bytes of memory.
Card processor ID FCZ102110NQ
2 FastEthernet interfaces
Configuration of DRAM is 64 bits wide with disabled parity.
191K bytes of NVRAM memory.
31360K bytes of ATA CompactFlash (read/write)Configuration register is 0 x 3922
Please help, how to set up vpn?
Hello
According to this output is more than clear that you do not have a k9 license applied to this router, this license will enable the security features on your IOS, in this case, you will need a permit of k9 with an activation key, and then you will be able to have available on your device encryption controls. Once you have that we can work on configuring site to site.
Do not forget to rate!
David Castro,
Kind regards
-
Customer Cisco IPSec vpn cisco ios router <>==
Hello
I need to implement ipsec vpn for all users of 10-15. They all use the vpn cisco 5.x client and we have a router for cisco ios at the office. We already have a situation of work for these users. However, it has become a necessity which known only devices (laptops company) are allowed to install a virtual private network.
I think that the only way to achieve this is to use certificates. But we don't won't to buy certificates if there is a free way to implement. So my question is
(1) what are the options I have to configure vpn ipsec, where only known devices can properly configure a vpn and all unknown devices are blocked?
(2) if the certificate is the only way. Can I somehow produce these certificates myself using cisco router ios?
(3) someone at - it an example of a similar installation/configuration?
Thanks in advance.
Kind regards
M.
Unfortunately if you connect to the router IOS, there is no other way except using the certificate. If you connect to a Cisco ASA firewall, then you can identify the laptop company using DAP (Dynamic Access Policy).
-
accept customer VPN Cisco 1841 with Cisco 501 site-to-site
I have a site-to-site with Cisco1841 on my seat. 1841, connect to Pix501 to Branch1. I want to accept VPN client with an app on my 1841. Is it possible on the same interface?
Thank you
no doubt this is supported.
Here is the setup time lan lan vpn and access codes remote vpn on a router:
crypto ISAKMP policy 10
BA 3des
preshared authentication
Group 2
ISAKMP crypto key xxxxxxxx address no.-xauth
ISAKMP crypto client configuration group vpngroup
key xxxxxxxx
pool vpnpool
ACL 130
Crypto ipsec transform-set esp-3des esp-md5-hmac vpnset
Crypto-map dynamic dynmap 10
Set transform-set vpnset
card crypto client vpnmap of authentication list vpnauthen
card crypto isakmp authorization list vpnauthor vpnmap
client configuration address card crypto vpnmap answer
vpnmap 10 card crypto ipsec-isakmp dynamic dynmap
vpnmap 20 ipsec-isakmp crypto map
defined by peers
superset of transform-set Set
match address 140
interface Ethernet0
IP 192.168.1.1 255.255.255.0
IP nat inside
interface Dialer0
IP address
NAT outside IP
vpnmap card crypto
vpnpool of local pool IP 10.1.1.1 10.1.1.10
IP nat inside source overload map route sheep interface Dialer0
access-list 101 deny ip 192.168.1.0 0.0.0.255 10.1.1.0 0.0.0.255
access-list 101 deny ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 101 permit ip 192.168.1.0 0.0.0.255 any
access-list 130 allow ip 192.168.1.0 0.0.0.255 10.1.1.0 0.0.0.255
access-list 140 allow ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
sheep allowed 10 route map
corresponds to the IP 101
-
Client Vpn Cisco vpn remote site inaccessible (one site to another)
Hello
I configured two vpn with pix 515 cisco connection. One using a cisco vpn client and another another site to site vpn connectin with other pix.
I have my local network with 192.168.149.0 network, vpn clinet pool with 192.168.17.0 network and a remote site with 192.168.145.0.
Client vpn local network accessible and always remote site, but 192.168.17.0 (vpn client) 192.168.145.0 not accessible (remote site).
Plese help me!
Thank you
This scenario is possible with no v6.x, v7.x
the link below is an example of configuration:
-
What clients VPN Cisco 2811 supports?
Is the solution of VPN Cisco 2811 locked customers cisco or that market with other brands too?
Best regards Tommy Svensson
Hello
With the correct IOS feature set, it will support IPsec VPN clients. This includes not only the Cisco VPN client but almost any standard IPsec client.
In addition, if on the 2811 can accept any browser SSL VPN connections, or even use the AnyConnect SSL client.
It will be useful.
Federico.
-
Impossible to establish a VPN to ASA 5505
I'm trying to set up a network VPN from Site to Site. Right now I'm doing this work in the laboratory. I have the Internet port on the Linksys connected directly to port 0 on the cisco that has been set up as the internet port.
My configuration is:
Remote site
Laptop 1 - IP 192.168.2.100 address 255.255.255.0 GW 192.168.2.1
The Router 1 (Linksys BEFSX41) - LAN IP 192.168.2.1 255.255.255.0
209.168.145.49 WAN IP address 255.255.255.0 GW 209.168.145.50
Host site
Laptop 2 - address 192.168.1.100 IP 255.255.255.0 GW 192.168.1.1
Router 2 (Cisco ASA 5505) - LAN IP 0 address 192.168.1.1 255.255.255.0
IP WAN (Port 0) 209.168.145.50 255.255.255.0
My problems:
I use ASDM 5.2 to configure the router of the SAA. With the configuration I currently have my linksys is not able to establish a VPN connection. The journal of ASA reported via the ASDM is as shown in the attachment ciscolog.txt.
My linksys journal is as listed in the attachment linksyslog.txt.
I also tried to create a Cisco VPN client connection using the cisco client software and a laptop connected directly to the internet port of the router cisco (port 0) and was not able to establish a connection with that either. I used the wizard of ASDM VPN to try to implement the Site-site as well as the scenarios of connection remotely. This has been unsuccessful in both cases.
The only one, I am really interested in getting to work is the site to site.
My current configuration of cisco is shown in the attachment cisco.txt.
If anyone has any input I would appreciate it a lot. I have been through the manuals of cisco as to scouring the internet and am unable to find an answer.
I enclose 3 files, cisco log (ciscolog.txt), linksys (linksyslog.txt) log and config cisco (cisco.txt) in the form of text files.
Thank you.
Sean
I hope that path statement solves your problem.
-Gilbert
Good job, Adam!
-
Problem with remote access VPN on ASA 5505
I currently have a problem of an ASA 5505 configuration to connect via VPN remote access by using the Cisco VPN Client 5.0.07.0440 under Windows 8 Pro x 64. The VPN client will prompt you for the user name and password during the connection process, but fails soon after.
The VPN client connects is as follows:
---------------------------------------------------------------------------------------------------------------------------------------
Cisco Systems VPN Client Version 5.0.07.0440
Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
Customer type: Windows, Windows NT
Running: 6.2.9200
2 15:09:21.240 11/12/12 Sev = Info/4 CM / 0 x 63100002
Start the login process
3 15:09:21.287 11/12/12 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
4 15:09:21.287 11/12/12 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "*." **. ***. *** »
5 15:09:21.287 11/12/12 Sev = Info/6 IKE/0x6300003B
Try to establish a connection with *. **. ***. ***.
6 15:09:21.287 11/12/12 Sev = Info/4 IKE / 0 x 63000001
From IKE Phase 1 negotiation
7 15:09:21.303 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) to *. **. ***. ***
8 15:09:21.365 11/12/12 Sev = Info/6 GUI/0x63B00012
Attributes of the authentication request is 6: 00.
9 15:09:21.334 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
10 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">
11 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer is a compatible peer Cisco-Unity
12 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer supports XAUTH
13 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer supports the DPD
14 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer supports NAT - T
15 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer supports fragmentation IKE payloads
16 15:09:21.334 11/12/12 Sev = Info/6 IKE / 0 x 63000001
IOS Vendor ID successful construction
17 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) to *. **. ***. ***
18 15:09:21.334 11/12/12 Sev = Info/6 IKE / 0 x 63000055
Sent a keepalive on the IPSec Security Association
19 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000083
IKE port in use - Local Port = 0xFBCE, Remote Port = 0 x 1194
20 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000072
Automatic NAT detection status:
Remote endpoint is NOT behind a NAT device
This effect is behind a NAT device
21 15:09:21.334 11/12/12 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system
22 15:09:21.365 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
23 15:09:21.365 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
24 15:09:21.365 11/12/12 Sev = Info/4 CM / 0 x 63100015
Launch application xAuth
25 15:09:21.474 11/12/12 Sev = Info/4 IPSEC / 0 x 63700008
IPSec driver started successfully
26 15:09:21.474 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
27 15:09:27.319 11/12/12 Sev = Info/4 CM / 0 x 63100017
xAuth application returned
28 15:09:27.319 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***
29 15:09:27.365 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
30 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
31 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***
32 15:09:27.365 11/12/12 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system
33 15:09:27.365 11/12/12 Sev = Info/5 IKE/0x6300005E
Customer address a request from firewall to hub
34 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***
35 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
36 15:09:27.397 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
37 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 192.168.2.70
38 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.255.0
39 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 192.168.2.1
40 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 8.8.8.8
41 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000001
42 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = NCHCO
43 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000
44 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (5) built by manufacturers on Saturday, May 20, 11 16:00
45 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001
46 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194
47 15:09:27.397 11/12/12 Sev = Info/4 CM / 0 x 63100019
Data in mode Config received
48 15:09:27.412 11/12/12 Sev = Info/4 IKE / 0 x 63000056
Received a request from key driver: local IP = 192.168.2.70, GW IP = *. **. ***. remote IP address = 0.0.0.0
49 15:09:27.412 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK QM * (HASH, SA, NO, ID, ID) to *. **. ***. ***
50 15:09:27.444 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
51 15:09:27.444 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">
52 15:09:27.444 11/12/12 Sev = Info/5 IKE / 0 x 63000045
Answering MACHINE-LIFE notify has value of 86400 seconds
53 15:09:27.444 11/12/12 Sev = Info/5 IKE / 0 x 63000047
This SA was already alive for 6 seconds, setting expiration 86394 seconds now
54 15:09:27.459 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
55 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">
56 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK INFO *(HASH, DEL) to *. **. ***. ***
57 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000049
IPsec security association negotiation made scrapped, MsgID = CE99A8A8
58 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000017
Marking of IKE SA delete (I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED
59 15:09:27.459 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
60 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000058
Received an ISAKMP for a SA message no assets, I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924
61 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">
62 15:09:27.490 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
63 15:09:30.475 11/12/12 Sev = Info/4 IKE/0x6300004B
IKE negotiation to throw HIS (I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED
64 15:09:30.475 11/12/12 Sev = Info/4 CM / 0 x 63100012
ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED". Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system
65 15:09:30.475 11/12/12 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
66 15:09:30.475 11/12/12 Sev = Info/6 CM / 0 x 63100046
Set indicator established tunnel to register to 0.
67 15:09:30.475 11/12/12 Sev = Info/4 IKE / 0 x 63000001
Signal received IKE to complete the VPN connection
68 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
69 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
70 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
71 15:09:30.475 11/12/12 Sev = Info/4 IPSEC/0x6370000A
IPSec driver successfully stopped
---------------------------------------------------------------------------------------------------------------------------------------
The running configuration is the following (there is a VPN site-to-site set up as well at an another ASA 5505, but that works perfectly):
: Saved
:
ASA Version 8.2 (5)
!
hostname NCHCO
Select hTjwXz/V8EuTw9p9 of encrypted password
hTjwXz/V8EuTw9p9 of encrypted passwd
names of
description of NCHCO name 192.168.2.0 City offices
name 192.168.2.80 VPN_End
name 192.168.2.70 VPN_Start
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.2.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address **. ***. 255.255.255.248
!
boot system Disk0: / asa825 - k8.bin
passive FTP mode
access extensive list ip NCHCO 255.255.255.0 outside_nat0_outbound allow 192.168.1.0 255.255.255.0
access extensive list ip NCHCO 255.255.255.0 inside_nat0_outbound allow 192.168.1.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access all 192.168.2.64 255.255.255.224
access extensive list ip NCHCO 255.255.255.0 outside_1_cryptomap allow 192.168.1.0 255.255.255.0
access extensive list ip NCHCO 255.255.255.0 outside_1_cryptomap_1 allow 192.168.1.0 255.255.255.0
Standard access list LAN_Access allow NCHCO 255.255.255.0
LAN_Access list standard access allowed 0.0.0.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask of VPN_Pool VPN_Start VPN_End of local pool IP 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 645.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside) 0-list of access outside_nat0_outbound
Route outside 0.0.0.0 0.0.0.0 74.219.208.49 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
network-acl outside_nat0_outbound
WebVPN
SVC request to enable default svc
Enable http server
http 192.168.1.0 255.255.255.0 inside
http *. **. ***. 255.255.255.255 outside
http 74.218.158.238 255.255.255.255 outside
http NCHCO 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac l2tp-transform
Crypto ipsec transform-set l2tp-transformation mode transit
Crypto ipsec transform-set vpn-transform esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map dyn-map 10 set pfs Group1
crypto dynamic-map dyn-map transform 10-set, vpn l2tp-transformation-transformation
dynamic-map encryption dyn-map 10 value reverse-road
Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs Group1
peer set card crypto outside_map 1 74.219.208.50
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
map outside_map 20-isakmp ipsec crypto dynamic outside_dyn_map
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
card crypto vpn-map 1 match address outside_1_cryptomap_1
card crypto vpn-card 1 set pfs Group1
set vpn-card crypto map peer 1 74.219.208.50
card crypto vpn-card 1 set of transformation-ESP-3DES-SHA
dynamic vpn-map 10 dyn-map ipsec isakmp crypto map
crypto isakmp identity address
crypto ISAKMP allow inside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 15
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 35
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP ipsec-over-tcp port 10000
enable client-implementation to date
Telnet 192.168.1.0 255.255.255.0 inside
Telnet NCHCO 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH NCHCO 255.255.255.0 inside
SSH timeout 5
Console timeout 0
dhcpd address 192.168.2.150 - 192.168.2.225 inside
dhcpd dns 216.68.4.10 216.68.5.10 interface inside
lease interface 64000 dhcpd inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of server DNS 192.168.2.1
Protocol-tunnel-VPN IPSec l2tp ipsec
nchco.local value by default-field
attributes of Group Policy DfltGrpPolicy
value of server DNS 192.168.2.1
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
allow password-storage
enable IPSec-udp
enable dhcp Intercept 255.255.255.0
the address value VPN_Pool pools
internal NCHVPN group policy
NCHVPN group policy attributes
value of 192.168.2.1 DNS Server 8.8.8.8
Protocol-tunnel-VPN IPSec l2tp ipsec
value by default-field NCHCO
admin LbMiJuAJjDaFb2uw encrypted privilege 15 password username
username privilege 15 encrypted password yB1lHEVmHZGj5C2Z 8njferg
username, encrypted NCHvpn99 QhZZtJfwbnowceB7 password
attributes global-tunnel-group DefaultRAGroup
address (inside) VPN_Pool pool
address pool VPN_Pool
authentication-server-group (inside) LOCAL
authentication-server-group (outside LOCAL)
LOCAL authority-server-group
authorization-server-group (inside) LOCAL
authorization-server-group (outside LOCAL)
Group Policy - by default-DefaultRAGroup
band-Kingdom
band-band
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
NOCHECK Peer-id-validate
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
tunnel-group DefaultWEBVPNGroup ppp-attributes
PAP Authentication
ms-chap-v2 authentication
tunnel-group 74.219.208.50 type ipsec-l2l
IPSec-attributes tunnel-group 74.219.208.50
pre-shared key *.
type tunnel-group NCHVPN remote access
attributes global-tunnel-group NCHVPN
address pool VPN_Pool
Group Policy - by default-NCHVPN
IPSec-attributes tunnel-group NCHVPN
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:15852745977ff159ba808c4a4feb61fa
: end
ASDM image disk0: / asdm - 645.bin
ASDM VPN_Start 255.255.255.255 inside location
ASDM VPN_End 255.255.255.255 inside location
don't allow no asdm history
Anyone have any idea why this is happening?
Thank you!
Add, crypto dynamic-map outside_dyn_map 20 value reverse-road.
With respect,
Safwan
-
Install two the separate IPSec VPNS on ASA 5505
Hello
I'll have set up a second tunnel IPSec VPN on my Cisco ASA 5505 to another office. I was able to configure one without problem through the ASDM, but were not able to get the second.
The IPSec tunnel connects to a WRVS4400N router to the other office. I tried the debug crypto isakmp and ipsec crypto, but I get nothing. Here is the config. Something seems wrong on my end? I've also attached a screenshot of the configuration settings on the remote router.
Output of the command: "show run".
: Saved
:
ASA Version 8.2 (5)
!
hostname WayneASA!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 70.91.18.205 255.255.255.252
!
interface Vlan5
Shutdown
No nameif
security-level 50
IP 192.168.10.1 255.255.255.0
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
75.75.75.75 server name
75.75.76.76 server name
domain 3gtms.com
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
inside_access_in of access allowed any ip an extended list
IPSec_Access to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.224
inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
TunnelSplit1 list standard access allowed 192.168.10.0 255.255.255.224
TunnelSplit1 list standard access allowed 192.168.1.0 255.255.255.0
outside_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
outside_2_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
outside_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
RemoteTunnel_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0pager lines 24
Enable logging
Within 1500 MTU
Outside 1500 MTU
IP mask 255.255.255.224 local pool VPNPool 192.168.10.1 - 192.168.10.30
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0
NAT (inside) 1 0.0.0.0 0.0.0.0inside_access_in access to the interface inside group
Access-group out_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 70.91.18.206 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set esp-3des esp-md5-hmac VPNTransformSet
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto IPSec_map 1 corresponds to the address IPSec_Access
card crypto IPSec_map 1 set peer 50.199.234.229
card crypto IPSec_map 1 the transform-set VPNTransformSet value
card crypto IPSec_map 2 corresponds to the address outside_2_cryptomap
card crypto IPSec_map 2 set pfs Group1
card crypto IPSec_map 2 set peer 98.101.139.210
card crypto IPSec_map 2 the transform-set VPNTransformSet value
card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
IPSec_map interface card crypto outside
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 50.199.234.229crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
Telnet 192.168.1.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 60
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.1.100 - 192.168.1.199 inside
dhcpd dns 75.75.75.75 75.75.76.76 interface inside
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal RemoteTunnel group strategy
attributes of Group Policy RemoteTunnel
value of server DNS 75.75.75.75 75.75.76.76
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list RemoteTunnel_splitTunnelAcl_1
3gtms.com value by default-field
eric 0vcSd5J/TLsFy7nU password user name encrypted privilege 15
username password encrypted URsSXKLozQMSeCBk privilege 5 lestofts
username lestofts attributes
type of remote access service
algobel lBWy5eNbHMCDPzuL encrypted password username
username algobel attributes
type of remote access service
type tunnel-group RemoteTunnel remote access
attributes global-tunnel-group RemoteTunnel
address pool VPNPool
Group Policy - by default-RemoteTunnel
IPSec-attributes tunnel-group RemoteTunnel
pre-shared key *.
tunnel-group 50.199.234.229 type ipsec-l2l
IPSec-attributes tunnel-group 50.199.234.229
pre-shared key *.
tunnel-group 98.101.139.210 type ipsec-l2l
IPSec-attributes tunnel-group 98.101.139.210
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the icmp
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the netbios
inspect the tftp
Review the ip options
inspect the dns
inspect the pptp
inspect the sip
!
global service-policy global_policy
context of prompt hostname
anonymous reporting remote call
Cryptochecksum:a86adc4b23977672679b6fb72d0bc187
: endYou are also missing the NAT0 rule
inside_nat0 to access extended list ip 192.168.2.0 allow 255.255.255.0 192.168.5.0 255.255.255.0
-Jouni
-
Hello
We have a firewall Cisco 5505 and installation work VPN through the firewall, which Cisco vpn client, should download us for our users to have the right customer on their computer desktop/latops.
Thank you
While the Cisco's VPN IPsec client is compatible with the ASA 5505, this product is end-of-sales and eventually be completely abandoned (end of support). (reference)
New remote VPN (IPsec or SSL) access should use the AnyConnect Secure Mobility client. (data sheet) You should have the essential AnyConnect bought and activated to support customers of license (at least). (reference) The part number (if you do not already) is L-ASA-AC-E-5505 = (cost less USD $100).
If you want to use clientless SSL VPN, you must purchase the AnyConnect Premium license. That option is authorized by user levels (25, 50, etc.)
'show version' on your device will display your current level of license, among other things.
-
a way vpn with asa to the 800 router
people
I have a site to site vpn set up between a asa 5540 and a 800 router
I want only the vpn to be initiated from the asa with the 800 remote listen incoming connections
I know that I can define the type of connection on the asa as only come but I can find an equivalent command to answer only for the 800 remote
can anyone point me in the right direction or is it enough to simply configure the asa as are created only for this encryption card
Thanks to anyone who takes the time to answer
Hello
I recommend you configure the tunnel as a dynamic to static tunnel VPN, the ASA will be the static counterpart, so it will be the initiator and the router will never be able to establish the connection.
The ASA will be a common L2L configuration, but the router will use a dynamic encryption card.
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a008051a69a.shtml
The PIX in the example is old, then you can simply adjust the controls to your current version, the important thing is to understand the concept.
Please let me know if that answers your question,
Thank you.
Maybe you are looking for
-
I have replace the signons3.txt and signons.sqlite with older files that I saved. They work the first time I launch Firefox 8, but if I quit and then re-open the browser, they are dashed again Also, when I click on "private browsing", nothing happens
-
Well enough what it says above. I haven't recorded telling me to reopen these pages, but when I launch Firefox, I have three tabs open automatically: (1) home page.(2) BBC radio player.(3) a message board that I use. I can't find a way to stop the lo
-
I brought my iphone at the Apple store for repair. I'm back, but now the phone is not on my list iphone find him. How can I add it in?
-
integration of a via file .h and .lib DLL
Hello In our application, we use a DLL that comes with the .h file and a .lib one but not for the CVI. In the past, qith CVI8.1, we applied the procedure described in the CVI .h file to generate the .lib file and it was OK. With the new version of CV
-
If I restore the computer to an earlier date, it will restore my password expired?
I use Vista. My main account on the computer (private) is also the administrator account. The password has expired. I saw a warning a week previously, but not once since and completely forgotten. I can access the other user account, but not my ma