Client VPN to ASA
Hello
We have a firewall Cisco 5505 and installation work VPN through the firewall, which Cisco vpn client, should download us for our users to have the right customer on their computer desktop/latops.
Thank you
While the Cisco's VPN IPsec client is compatible with the ASA 5505, this product is end-of-sales and eventually be completely abandoned (end of support). (reference)
New remote VPN (IPsec or SSL) access should use the AnyConnect Secure Mobility client. (data sheet) You should have the essential AnyConnect bought and activated to support customers of license (at least). (reference) The part number (if you do not already) is L-ASA-AC-E-5505 = (cost less USD $100).
If you want to use clientless SSL VPN, you must purchase the AnyConnect Premium license. That option is authorized by user levels (25, 50, etc.)
'show version' on your device will display your current level of license, among other things.
Tags: Cisco Security
Similar Questions
-
Client VPN Cisco ASA 5505 Cisco 1841 router
Hello. I'm doing a connection during a cisco vpn client and a vpn on one server asa 5505 behind a 1841 router (internet adsl2 + and NAT router).
My topology is almost as follows
customer - tunnel - 1841 - ASA - PC
ASA is the endpoint vpn (outside interface) device. I forward udp port 500 and 4500 on my router to the ASA and the tunnel rises. I exempt nat'ting on the asa and the router to the IP in dhcp vpn pool. I can connect to my tunnel but I can't "see" anything in the internal network. I allowed all traffic from the outside inwards buy from the ip vpn pool and I still send packets through the tunnel and I get nothing. I take a look at the statistics on the vpn client and I 2597 bytes (ping traffic) and there are no bytes. Any idea?
Where you you logged in when you took the "crypto ipsec to show his"? If this isn't the case then try again, also this option allows IPSEC over UDP 4500 and it is disabled, enable it.
ISAKMP nat-traversal crypto
Just enter the command as it is, then try to connect again after activation of this option and get the same result to see the.
-
I can't get my Cisco VPN client to negotiate successfully with my ASA 5500. I went through several configs and have had no luck. I write my config info and current router debug in the hope that someone sees something obvious. It is not at the initial stage.
Thank you very much for your help.
Always difficulties, try to add...
part of pre authentication policy ISAKMP 65535
ISAKMP 65535 3des encryption strategy
ISAKMP policy 65535 sha hash
65535 2 ISAKMP policy group
ISAKMP strategy life 65535 86400
-
Client VPN CISCO ASA for Android
Hi guys
I just received a request from a client who said he expects the procedure to establish a VPN from an Android device, as far as I know there is a soft ANYCONNECT but in my case, the client uses a CISCO VPN CLIENT, in this case it is possible to configure a VPN connection on the device, or I should use ANYCONNECT?
Kind regards.
Connection via the android client will be like the legacy cisco VPN client connection. You need only anyconnect mobile licenses if you connect with the android anyconnect client. Using the android client built in will consume licenses peer IPSEC. If no additional license not required.
-
Certificates for IPSEC vpn in ASA 8.0 clients
Hello!
I have configured MS CA and I have setup client vpn and ASA 7.0 make tunnel with certificates.
Same configuration does not work with ASA 8.0 I get the error
CRYPTO_PKI: Check whether an identical cert is
already in the database...
CRYPTO_PKI: looking for cert = d4bb2888, digest = handle
B8 74 97 f3 bf 25 1 c e5 2nd e5 21 3rd d1 93 15 d6 |... t...%...! >....
CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
CRYPTO_PKI: Cert not found in the database.
CRYPTO_PKI: Looking for suitable trustpoints...
CRYPTO_PKI: Found a suitable trustpoint authenticated A1.
CRYPTO_PKI (make trustedCerts list) CRYPTO_PKI:check_key_usage: KeyUsage Incorrect
(40)
CRYPTO_PKI: Validation of certificate: State failure: 1873. Any attempt of recovery
If necessary revocation status
ERROR: Certificate validation failed. Peer certificate's key usage is not valid, ser
Number of the IAL: 250F3ECE0000000009AF, name of the object: cn = xxxxx, unit of organization = xxxx, o = xxxxx, c =
XX
CRYPTO_PKI: Certificate not validated
Why the use of the key is invalid? What model of certificate must be used in MS in order to get a regular use of the key?
The schooling of CA's Terminal.
Thank you!
The cert needs to have defined Digital Signature key usage.
Don't know what models are available on MS, but it should be something like "User Ipsec" I guess.
Make 8 ASA behave like ASA 7 (i.e. disable th control on the use of the key of the cert), configure:
Crypto ca trustpoint
ignore-ipsec-keyusage
-
connect Cisco VPN client v5 to asa 5505
I have remote vpn configuration issues between ASA5505 and Cisco VPN client v5. Successfully, I can establish a connection between the client Vpn and ASA and receive the IP address of the ASA. Statistical customer VPN windows shows that packets are sent and encrypted but none of the packages is received/decrypted.
Cannot ping asa 5505
Any ideas on what I missed?
Try adding...
ISAKMP nat-traversal crypto
In addition, you cannot ping the inside interface of the ASA vpn without this command...
management-access inside
Please evaluate the useful messages.
-
Cisco VPN Client and Windows XP VPN Client IPSec to ASA
I configured ASA for IPSec VPN via Cisco VPN Client and XP VPN client communications. I can connect successfully with Cisco VPN Client, but I get an error when connecting with the XP client. Debugging said "misconfigured groups and transport/tunneling mode" I know, they use different methods of transport and tunneling, and I think that I have configured both. Take a look at the config.
PS a funny thing - when I connect with client VPN in Windows Server 2003, I have no error. The only difference is that client XP is behind an ADSL router and client server is directly connected to the Internet on one of its public IP of interfaces. NAT in the case of XP can cause problems?
Config is:
!
interface GigabitEthernet0/2.30
Description remote access
VLAN 30
nameif remote access
security-level 0
IP 85.*. *. 1 255.255.255.0
!
access-list 110 scope ip allow a whole
NAT list extended access permit tcp any host 10.254.17.10 eq ssh
NAT list extended access permit tcp any host 10.254.17.26 eq ssh
access-list extended ip allowed any one sheep
access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh
sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.121.0 255.255.255.0
flow-export destination inside-Bct 192.168.1.27 9996
IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0
ARP timeout 14400
global (outside-Baku) 1 interface
global (outside-Ganja) interface 2
NAT (inside-Bct) 0 access-list sheep-vpn
NAT (inside-Bct) 1 access list nat
NAT (inside-Bct) 2-nat-ganja access list
Access-group rdp on interface outside-Ganja
!
Access remote 0.0.0.0 0.0.0.0 85.*. *. 1 2
Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1
Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1
Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1
Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1
Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1
dynamic-access-policy-registration DfltAccessPolicy
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-md5-hmac vpnclienttrans
Crypto ipsec transform-set vpnclienttrans transport mode
Crypto ipsec transform-set esp-3des esp-md5-hmac raccess
life crypto ipsec security association seconds 214748364
Crypto ipsec kilobytes of life security-association 214748364
raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1
card crypto interface for remote access vpnclientmap
crypto isakmp identity address
ISAKMP crypto enable vpntest
ISAKMP crypto enable outside-Baku
ISAKMP crypto enable outside-Ganja
crypto ISAKMP enable remote access
ISAKMP crypto enable Interior-Bct
crypto ISAKMP policy 30
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
No encryption isakmp nat-traversal
No vpn-addr-assign aaa
Telnet timeout 5
SSH 192.168.1.0 255.255.255.192 outside Baku
SSH 10.254.17.26 255.255.255.255 outside Baku
SSH 10.254.17.18 255.255.255.255 outside Baku
SSH 10.254.17.10 255.255.255.255 outside Baku
SSH 10.254.17.26 255.255.255.255 outside-Ganja
SSH 10.254.17.18 255.255.255.255 outside-Ganja
SSH 10.254.17.10 255.255.255.255 outside-Ganja
SSH 192.168.1.0 255.255.255.192 Interior-Bct
internal vpn group policy
attributes of vpn group policy
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
BCT.AZ value by default-field
attributes global-tunnel-group DefaultRAGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
Hello
For the Cisco VPN client, you would need a tunnel-group name configured on the ASA with a pre-shared key.
Please see configuration below:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml
or
Please see the section of tunnel-group config of the SAA.
There is a tunnel-group called "rtptacvpn" and a pre-shared key associated with it. This group name is used by the VPN Client Group name.
So, you would need a specific tunnel-group name configured with a pre-shared key and use it on the Cisco VPN Client.
Secondly, because you are behind a router ADSL, I'm sure that's configured for NAT. can you please activate NAT - T on your ASA.
"crypto isakmp nat-traversal.
Thirdly, change the transformation of the value
raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
Let me know the result.
Thank you
Gilbert
-
% 7-ASA-710005: request TCP thrown error in the Client VPN Site to CISCO ASA 5510
Hi friends,
I am trying to built customer to site VPN CISCO ASA 5510 8.4 (4) and get error below when connecting to a cisco VPN client software. Also, I'm below ASA, log. Please help me to reslove.
Error in CISCO VPN Client software:
Secure VPN connection terminated locally by the client.
Reason: 414: unable to establish a TCP connection.
Error in CISCO ASA 5510
7-ASA-710005%: TCP request and eliminated from
49276 outward: 10000 The ASA configuration:
XYZ # sh run
: Saved
:
ASA Version 8.4 (4)
!
hostname XYZ
domain XYZ
activate the password encrypted 3uLkVc9JwRA1/OXb N3
activate the encrypted password of R/x90UjisGVJVlh2
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
nameif outside_rim
security-level 0
IP 1.1.1.1 255.255.255.252
!
interface Ethernet0/1
full duplex
nameif XYZ_DMZ
security-level 50
IP 172.1.1.1 255.255.255.248
!
interface Ethernet0/2
Speed 100
full duplex
nameif outside
security-level 0
IP address 2.2.2.2 255.255.255.252
!
interface Ethernet0/3
Speed 100
full duplex
nameif inside
security-level 100
IP 3.3.3.3 255.255.255.224
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
!
boot system Disk0: / asa844 - k8.bin
passive FTP mode
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name xx.xx.xx.xx
Server name xx.xx.xx.xx
Server name xx.xx.xx.xx
Server name xx.xx.xx.xx
domain XYZ
network object obj - 172.17.10.3
Home 172.17.10.3
network object obj - 10.1.134.0
10.1.134.0 subnet 255.255.255.0
network object obj - 208.75.237.0
208.75.237.0 subnet 255.255.255.0
network object obj - 10.7.0.0
10.7.0.0 subnet 255.255.0.0
network object obj - 172.17.2.0
172.17.2.0 subnet 255.255.255.0
network object obj - 172.17.3.0
172.17.3.0 subnet 255.255.255.0
network object obj - 172.19.2.0
172.19.2.0 subnet 255.255.255.0
network object obj - 172.19.3.0
172.19.3.0 subnet 255.255.255.0
network object obj - 172.19.7.0
172.19.7.0 subnet 255.255.255.0
network object obj - 10.1.0.0
10.1.0.0 subnet 255.255.0.0
network object obj - 10.2.0.0
10.2.0.0 subnet 255.255.0.0
network object obj - 10.3.0.0
10.3.0.0 subnet 255.255.0.0
network object obj - 10.4.0.0
10.4.0.0 subnet 255.255.0.0
network object obj - 10.6.0.0
10.6.0.0 subnet 255.255.0.0
network object obj - 10.9.0.0
10.9.0.0 subnet 255.255.0.0
network object obj - 10.11.0.0
10.11.0.0 subnet 255.255.0.0
network object obj - 10.12.0.0
10.12.0.0 subnet 255.255.0.0
network object obj - 172.19.1.0
172.19.1.0 subnet 255.255.255.0
network object obj - 172.21.2.0
172.21.2.0 subnet 255.255.255.0
network object obj - 172.16.2.0
172.16.2.0 subnet 255.255.255.0
network object obj - 10.19.130.201
Home 10.19.130.201
network object obj - 172.30.2.0
172.30.2.0 subnet 255.255.255.0
network object obj - 172.30.3.0
172.30.3.0 subnet 255.255.255.0
network object obj - 172.30.7.0
172.30.7.0 subnet 255.255.255.0
network object obj - 10.10.1.0
10.10.1.0 subnet 255.255.255.0
network object obj - 10.19.130.0
10.19.130.0 subnet 255.255.255.0
network of object obj-XXXXXXXX
host XXXXXXXX
network object obj - 145.248.194.0
145.248.194.0 subnet 255.255.255.0
network object obj - 10.1.134.100
Home 10.1.134.100
network object obj - 10.9.124.100
Home 10.9.124.100
network object obj - 10.1.134.101
Home 10.1.134.101
network object obj - 10.9.124.101
Home 10.9.124.101
network object obj - 10.1.134.102
Home 10.1.134.102
network object obj - 10.9.124.102
Home 10.9.124.102
network object obj - 115.111.99.133
Home 115.111.99.133
network object obj - 10.8.108.0
10.8.108.0 subnet 255.255.255.0
network object obj - 115.111.99.129
Home 115.111.99.129
network object obj - 195.254.159.133
Home 195.254.159.133
network object obj - 195.254.158.136
Home 195.254.158.136
network object obj - 209.164.192.0
subnet 209.164.192.0 255.255.224.0
network object obj - 209.164.208.19
Home 209.164.208.19
network object obj - 209.164.192.126
Home 209.164.192.126
network object obj - 10.8.100.128
subnet 10.8.100.128 255.255.255.128
network object obj - 115.111.99.130
Home 115.111.99.130
network object obj - 10.10.0.0
subnet 10.10.0.0 255.255.0.0
network object obj - 115.111.99.132
Home 115.111.99.132
network object obj - 10.10.1.45
Home 10.10.1.45
network object obj - 10.99.132.0
10.99.132.0 subnet 255.255.255.0
the Serversubnet object-group network
object-network 10.10.1.0 255.255.255.0
network-object 10.10.5.0 255.255.255.192
the XYZ_destinations object-group network
object-network 10.1.0.0 255.255.0.0
object-network 10.2.0.0 255.255.0.0
network-object 10.3.0.0 255.255.0.0
network-object 10.4.0.0 255.255.0.0
network-object 10.6.0.0 255.255.0.0
network-object 10.7.0.0 255.255.0.0
network-object 10.11.0.0 255.255.0.0
object-network 10.12.0.0 255.255.0.0
object-network 172.19.1.0 255.255.255.0
object-network 172.19.2.0 255.255.255.0
object-network 172.19.3.0 255.255.255.0
object-network 172.19.7.0 255.255.255.0
object-network 172.17.2.0 255.255.255.0
object-network 172.17.3.0 255.255.255.0
object-network 172.16.2.0 255.255.255.0
object-network 172.16.3.0 255.255.255.0
host of the object-Network 10.50.2.206
the XYZ_us_admin object-group network
network-object 10.3.1.245 255.255.255.255
network-object 10.5.33.7 255.255.255.255
network-object 10.211.5.7 255.255.255.255
network-object 10.3.33.7 255.255.255.255
network-object 10.211.3.7 255.255.255.255
the XYZ_blr_networkdevices object-group network
object-network 10.200.10.0 255.255.255.0
access list XYZ extended ip 10.19.130.0 allow 255.255.255.0 145.248.194.0 255.255.255.0
access list XYZ extended ip 10.19.130.0 allow 255.255.255.0 host 172.16.2.21
access list XYZ extended ip 10.19.130.0 allow 255.255.255.0 host 172.16.2.22
access list XYZ extended ip 10.19.130.0 allow 255.255.255.0 host XXXXXXXX
Access extensive list ip 10.19.130.0 XYZ_PAT allow 255.255.255.0 any
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 host 195.254.159.133
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 host 195.254.158.136
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 any
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 209.164.192.0 255.255.224.0
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 host 209.164.208.19
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 host 209.164.192.126
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 208.75.237.0 255.255.255.0
Allow Access-list extended sheep 255.255.255.0 10.1.134.0 IP 10.7.0.0 255.255.0.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.17.2.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.17.3.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.19.2.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.19.3.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.19.7.0 255.255.255.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.0.0 255.255.0.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.2.0.0 255.255.0.0
Allow Access-list extended sheep 255.255.255.0 10.1.134.0 IP 10.3.0.0 255.255.0.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.4.0.0 255.255.0.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.6.0.0 255.255.0.0
Allow Access-list extended sheep 255.255.255.0 10.1.134.0 IP 10.9.0.0 255.255.0.0
Allow Access-list extended sheep 255.255.255.0 10.1.134.0 IP 10.11.0.0 255.255.0.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.12.0.0 255.255.0.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.19.1.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.21.2.0 255.255.255.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 172.16.2.0 255.255.255.0
access-list extended sheep allowed host ip 10.19.130.201 172.30.2.0 255.255.255.0
access-list extended sheep allowed host ip 10.19.130.201 172.30.3.0 255.255.255.0
access-list extended sheep allowed host ip 10.19.130.201 172.30.7.0 255.255.255.0
access-list extended sheep allowed ip object-group Serversubnet-group of objects XYZ_destinations
10.10.1.0 IP Access-list extended sheep 255.255.255.0 allow 10.2.0.0 255.255.0.0
10.19.130.0 IP Access-list extended sheep 255.255.255.0 allow host XXXXXXXX
IP 10.19.130.0 allow Access-list extended sheep 255.255.255.0 145.248.194.0 255.255.255.0
Access extensive list ip 10.8.108.0 Guest_PAT allow 255.255.255.0 any
CACIB list extended access permitted ip 10.8.100.128 255.255.255.128 145.248.194.0 255.255.255.0
Access extensive list ip 10.8.100.128 Cacib_PAT allow 255.255.255.128 all
Access extensive list ip 10.1.134.0 New_Edge allow 255.255.255.0 208.75.237.0 255.255.255.0
Allow XYZ_global to access extended list ip 10.7.0.0 255.255.0.0 10.1.134.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.7.0.0 255.255.0.0
Access extensive list ip 172.17.2.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.17.3.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.19.2.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.19.3.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.19.7.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 10.1.0.0 XYZ_global allow 255.255.0.0 10.1.134.0 255.255.255.0
Access extensive list 10.2.0.0 ip XYZ_global 255.255.0.0 allow 10.1.134.0 255.255.255.0
Allow XYZ_global to access extended list ip 10.3.0.0 255.255.0.0 10.1.134.0 255.255.255.0
Access extensive list 10.4.0.0 ip XYZ_global 255.255.0.0 allow 10.1.134.0 255.255.255.0
Access extensive list 10.6.0.0 ip XYZ_global 255.255.0.0 allow 10.1.134.0 255.255.255.0
Access extensive list ip 10.9.0.0 XYZ_global allow 255.255.0.0 10.1.134.0 255.255.255.0
Allow XYZ_global to access extended list ip 10.11.0.0 255.255.0.0 10.1.134.0 255.255.255.0
Access extensive list 10.12.0.0 ip XYZ_global 255.255.0.0 allow 10.1.134.0 255.255.255.0
Access extensive list ip 172.19.1.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.21.2.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.17.2.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.17.3.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.19.2.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.19.3.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.19.7.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.1.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.2.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.3.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.4.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.6.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.9.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.11.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.12.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.19.1.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.21.2.0 255.255.255.0
XYZ_global to access extended list ip 172.16.2.0 allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.16.2.0 255.255.255.0
Access extensive list ip 172.30.2.0 XYZ_global allow 255.255.255.0 host 10.19.130.201
XYZ_global list extended access allowed host ip 10.19.130.201 172.30.2.0 255.255.255.0
Access extensive list ip 172.30.3.0 XYZ_global allow 255.255.255.0 host 10.19.130.201
XYZ_global list extended access allowed host ip 10.19.130.201 172.30.3.0 255.255.255.0
Access extensive list ip 172.30.7.0 XYZ_global allow 255.255.255.0 host 10.19.130.201
XYZ_global list extended access allowed host ip 10.19.130.201 172.30.7.0 255.255.255.0
XYZ_global list extended access permitted ip object-group Serversubnet-group of objects XYZ_destinations
XYZ_global list extended access permitted ip object-group XYZ_destinations-group of objects Serversubnet
ML_VPN list extended access allowed host ip 115.111.99.129 209.164.192.0 255.255.224.0
permit access list extended ip host 115.111.99.129 ML_VPN 209.164.208.19
permit access list extended ip host 115.111.99.129 ML_VPN 209.164.192.126
permit access list extended ip host 10.9.124.100 Da_VPN 10.125.81.88
permit access list extended ip host 10.9.124.101 Da_VPN 10.125.81.88
permit access list extended ip host 10.9.124.102 Da_VPN 10.125.81.88
Da_VPN list extended access allowed host ip 10.9.124.100 10.125.81.0 255.255.255.0
Da_VPN list extended access allowed host ip 10.9.124.101 10.125.81.0 255.255.255.0
Da_VPN list extended access allowed host ip 10.9.124.102 10.125.81.0 255.255.255.0
Sr_PAT to access extended list ip 10.10.0.0 allow 255.255.0.0 any
Da_Pd_VPN list extended access allowed host ip 10.9.124.100 10.125.80.64 255.255.255.192
Da_Pd_VPN list extended access allowed host ip 10.9.124.100 10.125.64.0 255.255.240.0
permit access list extended ip host 10.9.124.100 Da_Pd_VPN 10.125.85.46
permit access list extended ip host 10.9.124.100 Da_Pd_VPN 10.125.86.46
Da_Pd_VPN list extended access allowed host ip 10.9.124.101 10.125.80.64 255.255.255.192
Da_Pd_VPN list extended access allowed host ip 10.9.124.101 10.125.64.0 255.255.240.0
permit access list extended ip host 10.9.124.101 Da_Pd_VPN 10.125.85.46
permit access list extended ip host 10.9.124.101 Da_Pd_VPN 10.125.86.46
Da_Pd_VPN list extended access allowed host ip 10.9.124.102 10.125.80.64 255.255.255.192
Da_Pd_VPN list extended access allowed host ip 10.9.124.102 10.125.64.0 255.255.240.0
permit access list extended ip host 10.9.124.102 Da_Pd_VPN 10.125.85.46
permit access list extended ip host 10.9.124.102 Da_Pd_VPN 10.125.86.46
Access extensive list ip 10.19.130.0 XYZ_reliance allow 255.255.255.0 145.248.194.0 255.255.255.0
access-list coextended permit ip host 2.2.2.2 XXXXXXXX
access-list coextended allow the host ip XXXXXXXXhost 2.2.2.2
permitted this access list extended ip 10.1.134.0 255.255.255.0 208.75.237.0 255.255.255.0
permitted this access list extended ip 208.75.237.0 255.255.255.0 10.1.134.0 255.255.255.0
access list acl-outside extended permit ip host 57.66.81.159 172.17.10.3
access list acl-outside extended permit ip host 80.169.223.179 172.17.10.3
access list acl-outside scope permit ip any host 172.17.10.3
access list acl-outside extended permitted tcp any host 10.10.1.45 eq https
access list acl-outside extended permit tcp any any eq 10000
access list acl-outside extended deny ip any any newspaper
pager lines 10
Enable logging
debug logging in buffered memory
outside_rim MTU 1500
MTU 1500 XYZ_DMZ
Outside 1500 MTU
Within 1500 MTU
IP pool local XYZ_c2s_vpn_pool 172.30.10.51 - 172.30.10.254
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ICMP allow any inside
don't allow no asdm history
ARP timeout 14400
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 208.75.237.0 obj - 208.75.237.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.7.0.0 obj - 10.7.0.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.17.2.0 obj - 172.17.2.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.17.3.0 obj - 172.17.3.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.19.2.0 obj - 172.19.2.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.19.3.0 obj - 172.19.3.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.19.7.0 obj - 172.19.7.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.1.0.0 obj - 10.1.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.2.0.0 obj - 10.2.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.3.0.0 obj - 10.3.0.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.4.0.0 obj - 10.4.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.6.0.0 obj - 10.6.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.9.0.0 obj - 10.9.0.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.11.0.0 obj - 10.11.0.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.12.0.0 obj - 10.12.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.19.1.0 obj - 172.19.1.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.21.2.0 obj - 172.21.2.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.16.2.0 obj - 172.16.2.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.201 obj - 10.19.130.201 destination static obj - 172.30.2.0 obj - 172.30.2.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.201 obj - 10.19.130.201 destination static obj - 172.30.3.0 obj - 172.30.3.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.201 obj - 10.19.130.201 destination static obj - 172.30.7.0 obj - 172.30.7.0 no-proxy-arp-search to itinerary
NAT (inside, all) static source Serversubnet Serversubnet XYZ_destinations XYZ_destinations non-proxy-arp-search of route static destination
NAT (inside, all) source static obj - 10.10.1.0 obj - 10.10.1.0 destination static obj - 10.2.0.0 obj - 10.2.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.0 obj - 10.19.130.0 destination static obj-XXXXXXXX XXXXXXXX - obj non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.0 obj - 10.19.130.0 destination static obj - 145.248.194.0 obj - 145.248.194.0 no-proxy-arp-search to itinerary
NAT source (indoor, outdoor), obj static obj - 10.1.134.100 - 10.9.124.100
NAT source (indoor, outdoor), obj static obj - 10.1.134.101 - 10.9.124.101
NAT source (indoor, outdoor), obj static obj - 10.1.134.102 - 10.9.124.102
NAT interface dynamic obj - 10.8.108.0 source (indoor, outdoor)
NAT (inside, outside) source dynamic obj - 10.19.130.0 obj - 115.111.99.129
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 195.254.159.133 obj - 195.254.159.133
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 195.254.158.136 obj - 195.254.158.136
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 209.164.192.0 obj - 209.164.192.0
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 209.164.208.19 obj - 209.164.208.19
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 209.164.192.126 obj - 209.164.192.126
NAT (inside, outside) source dynamic obj - 10.8.100.128 obj - 115.111.99.130
NAT (inside, outside) source dynamic obj - 10.10.0.0 obj - 115.111.99.132
NAT source (indoor, outdoor), obj static obj - 10.10.1.45 - 115.111.99.133
NAT (inside, outside) source dynamic obj - 10.99.132.0 obj - 115.111.99.129
!
network object obj - 172.17.10.3
NAT (XYZ_DMZ, outside) static 115.111.99.134
Access-group acl-outside in external interface
Route outside 0.0.0.0 0.0.0.0 115.111.23.129 1
Route outside 0.0.0.0 0.0.0.0 115.254.127.130 10
Route inside 10.10.0.0 255.255.0.0 10.8.100.1 1
Route inside 10.10.1.0 255.255.255.0 10.8.100.1 1
Route inside 10.10.5.0 255.255.255.192 10.8.100.1 1
Route inside 10.8.100.128 255.255.255.128 10.8.100.1 1
Route inside 10.8.108.0 255.255.255.0 10.8.100.1 1
Route inside 10.19.130.0 255.255.255.0 10.8.100.1 1
Route inside 10.99.4.0 255.255.255.0 10.99.130.254 1
Route inside 10.99.132.0 255.255.255.0 10.8.100.1 1
Route inside 10.1.134.0 255.255.255.0 10.8.100.1 1
Route outside 208.75.237.0 255.255.255.0 115.111.23.129 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication LOCAL telnet console
LOCAL AAA authorization command
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn2
Crypto ipsec transform-set esp-aes-256 ikev1, esp-md5-hmac vpn6
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn5
Crypto ipsec transform-set esp-aes-256 ikev1, esp-md5-hmac vpn7
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn4
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn1
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn_reliance
Crypto ipsec transform-set esp-3des esp-md5-hmac ikev1 c2s_vpn
86400 seconds, duration of life crypto ipsec security association
Crypto-map dynamic dyn1 ikev1 transform-set c2s_vpn 1 set
Crypto-map dynamic dyn1 1jeu reverse-road
card crypto vpn 1 corresponds to the address XYZ
card 1 set of peer XYZ Peer IP vpn crypto
1 set transform-set vpn1 ikev1 vpn crypto card
card crypto vpn 1 lifetime of security set association, 3600 seconds
card crypto vpn 1 set security-association life kilobytes 4608000
correspondence vpn crypto card address 2 DON'T
2 peer NE_Peer IP vpn crypto card game
2 set transform-set vpn2 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 2 set security-association
card crypto vpn 2 set security-association life kilobytes 4608000
card crypto vpn 4 corresponds to the address ML_VPN
card crypto vpn 4 set pfs
vpn crypto card game 4 peers ML_Peer IP
4 set transform-set vpn4 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 4 set - the security association
card crypto vpn 4 set security-association life kilobytes 4608000
vpn crypto card 5 corresponds to the address XYZ_global
vpn crypto card game 5 peers XYZ_globa_Peer IP
5 set transform-set vpn5 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 5 set - the security association
card 5 security-association life set vpn crypto kilobytes 4608000
vpn crypto card 6 corresponds to the address Da_VPN
vpn crypto card game 6 peers Da_VPN_Peer IP
6 set transform-set vpn6 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 6 set - the security association
card crypto vpn 6 set security-association life kilobytes 4608000
vpn crypto card 7 corresponds to the address Da_Pd_VPN
7 peer Da_Pd_VPN_Peer IP vpn crypto card game
7 set transform-set vpn6 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 7 set - the security association
card crypto vpn 7 set security-association life kilobytes 4608000
vpn outside crypto map interface
crypto map vpn_reliance 1 corresponds to the address XYZ_rim
card crypto vpn_reliance 1 set of peer XYZ_rim_Peer IP
card crypto 1 ikev1 transform-set vpn_reliance set vpn_reliance
vpn_reliance card crypto 1 lifetime of security set association, 3600 seconds
card crypto vpn_reliance 1 set security-association life kilobytes 4608000
card crypto vpn_reliance interface outside_rim
dynamic mymap 1 dyn1 ipsec-isakmp crypto map
crypto isakmp identity address
No encryption isakmp nat-traversal
Crypto ikev1 enable outside_rim
Crypto ikev1 allow outside
IKEv1 crypto policy 1
preshared authentication
aes-256 encryption
sha hash
Group 5
lifetime 28800
IKEv1 crypto policy 2
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
IKEv1 crypto policy 4
preshared authentication
aes-256 encryption
sha hash
Group 5
life 28000
IKEv1 crypto policy 5
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
preshared authentication
3des encryption
sha hash
Group 2
life 43200
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 10.8.100.0 255.255.255.224 inside
Telnet timeout 5
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
no basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interception
internal XYZ_c2s_vpn group strategy
username testadmin encrypted password oFJjANE3QKoA206w
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXXtype ipsec-l2l
tunnel-group XXXXXXXXipsec-attributes
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
type tunnel-group XYZ_c2s_vpn remote access
attributes global-tunnel-group XYZ_c2s_vpn
address pool XYZ_c2s_vpn_pool
IPSec-attributes tunnel-group XYZ_c2s_vpn
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
Review the ip options
!
global service-policy global_policy
level 3 privilege see the running-config command exec mode
logging of orders privilege see the level 3 exec mode
privilege see the level 3 exec mode command crypto
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:caa7476cd348ed89b95d37d4e3c9e1d8
: endXYZ #.
Good news
Follow these steps:
network object obj - 172.30.10.0_24
172.30.10.0 subnet 255.255.255.0
!
the LOCAL_NETWORKS_VPN object-group network
object-network 1.1.1.0 255.255.255.0
!
NAT (inside, outside) 1 static source LOCAL_NETWORKS_VPN destination LOCAL_NETWORKS_VPN static obj - 172.30.10.0_24 obj - 172.30.10.0_24 - route search
* Where 1.1.1.0/24 is the internal network that you want to reach through the tunnel.
Keep me posted.
Thank you.
Please note all messages that will be useful.
-
Troubleshooting IPSec Site to Site VPN between ASA and 1841
Hi all
in the past I've implemented several VPN connections between the devices of the SAA. So I thought a site link between an ASA site and 1841 would be easier... But it seems I was mistaken.
I configured a VPN Site to Site, as it has been described in the Document ID: SDM 110198: IPsec Site to Site VPN between ASA/PIX and an example of IOS Router Configuration (I have not used SDM but CCP).
I have run the wizards on the ASA with ASDM and the current IOS version 15.1 1841, with CCP.
It seems to Phase 1 and 2 are coming although my ASA in ADSM reports (monitoring > VPN > VPN statistics > Sessions) a tunnel established with some of the Tx traffic but 0 Rx traffic),
On the ASA:
Output of the command: "sh crypto ipsec its peer 217.xx.yy.zz.
address of the peers: 217.86.154.120
Crypto map tag: VPN-OUTSIDE, seq num: 2, local addr: 62.aa.bb.ccaccess extensive list ip 192.168.37.0 outside_2_cryptomap_1 allow 255.255.255.0 172.20.2.0 255.255.255.0
local ident (addr, mask, prot, port): (LAN-A/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (LAN-G/255.255.255.0/0/0)
current_peer: 217.xx.yy.zz#pkts program: 400, #pkts encrypt: 400, #pkts digest: 400
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 400, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 62.aa.bb.cc, remote Start crypto. : 217.xx.yy.zz
Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: 39135054
current inbound SPI: B2E9E500SAS of the esp on arrival:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 100327424, crypto-map: VPN-OUTSIDE
calendar of his: service life remaining (KB/s) key: (4374000/1598)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
outgoing esp sas:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 100327424, crypto-map: VPN-OUTSIDE
calendar of his: service life remaining (KB/s) key: (4373976/1598)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001Output of the command: "sh crypto isakmp his."
HIS active: 4
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 4IKE Peer: 217.xx.yy.zz
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVEOn the 1841
1841 crypto isakmp #sh its
IPv4 Crypto ISAKMP Security Association
DST CBC conn-State id
217.86.154.120 62.153.156.163 QM_IDLE 1002 ACTIVE1841 crypto ipsec #sh its
Interface: Dialer1
Tag crypto map: SDM_CMAP_1, local addr 217.86.154.120protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.20.2.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.37.0/255.255.255.0/0/0)
current_peer 62.153.156.163 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 585, #pkts decrypt: 585, #pkts check: 585
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 217.86.154.120, remote Start crypto. : 62.153.156.163
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer1
current outbound SPI: 0xB2E9E500 (3001672960)
PFS (Y/N): Y, Diffie-Hellman group: group2SAS of the esp on arrival:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2003, flow_id: FPGA:3, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505068/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2004, flow_id: FPGA:4, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505118/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
Interface: virtual Network1
Tag crypto map: SDM_CMAP_1, local addr 217.86.154.120protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.20.2.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.37.0/255.255.255.0/0/0)
current_peer 62.153.156.163 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 585, #pkts decrypt: 585, #pkts check: 585
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 217.86.154.120, remote Start crypto. : 62.153.156.163
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer1
current outbound SPI: 0xB2E9E500 (3001672960)
PFS (Y/N): Y, Diffie-Hellman group: group2SAS of the esp on arrival:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2003, flow_id: FPGA:3, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505068/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2004, flow_id: FPGA:4, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505118/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
It seems that the routing on the 1841 is working properly as I can tear down the tunnel and relaunch in scathing a host on the network of 1841, but not vice versa.
Trounleshoot VPN of the 1841 report shows a message like "the following sources are forwarded through the interface card crypto. (172.20.2.0 1) go to "Configure-> routing" and correct the routing table.
I have not found an error on the 1841 config so if one of the guys reading this thread has an idea I appreciate highly suspicion!
It's the running of the 1841 configuration
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
host name 1841
!
boot-start-marker
start the system flash c1841-adventerprisek9 - mz.151 - 1.T.bin
boot-end-marker
!
logging buffered 51200 notifications
!
AAA new-model
!
!
AAA authentication login default local
!
AAA - the id of the joint session
!
iomem 20 memory size
clock timezone PCTime 1
PCTime of summer time clock day March 30, 2003 02:00 October 26, 2003 03:00
dot11 syslog
IP source-route
!
No dhcp use connected vrf ip
!
IP cef
no ip bootp Server
IP domain name test
name of the IP-server 194.25.2.129
name of the IP-server 194.25.2.130
name of the IP-server 194.25.2.131
name of the IP-server 194.25.2.132
name of the IP-server 194.25.2.133
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
object-group network phone
VoIP phone description
Home 172.20.2.50
Home 172.20.2.51
!
redundancy
!
!
controller LAN 0/0/0
atm mode
Annex symmetrical shdsl DSL-mode B
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
isakmp encryption key * address 62.aa.bb.cc
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description Tunnel to62.aa.bb.cc
the value of 62.aa.bb.cc peer
game of transformation-ESP-3DES-SHA
PFS group2 Set
match address 100
!
!
!
interface FastEthernet0/0
DMZ description $ FW_OUTSIDE$
10.10.10.254 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
!
interface FastEthernet0/1
Description $ETH - LAN$ $FW_INSIDE$
IP 172.20.2.254 255.255.255.0
IP access-group 100 to
IP nat inside
IP virtual-reassembly
IP tcp adjust-mss 1412
automatic duplex
automatic speed
!
ATM0/0/0 interface
no ip address
No atm ilmi-keepalive
!
point-to-point interface ATM0/0/0.1
PVC 1/32
PPPoE-client dial-pool-number 1
!
!
interface Dialer1
Description $FW_OUTSIDE$
the negotiated IP address
IP mtu 1452
NAT outside IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 1
Dialer-Group 2
PPP authentication chap callin pap
PPP chap hostname xxxxxxx
PPP chap password 7 xxxxxxx8
PPP pap sent-name of user password xxxxxxx xxxxxxx 7
map SDM_CMAP_1 crypto
!
IP forward-Protocol ND
IP http server
local IP http authentication
IP http secure server
!
!
The dns server IP
IP nat inside source static tcp 10.10.10.1 808 interface Dialer1 80
IP nat inside source static tcp 10.10.10.1 25 25 Dialer1 interface
IP nat inside source overload map route SDM_RMAP_1 interface Dialer1
IP nat inside source overload map route SDM_RMAP_2 interface Dialer1
IP route 0.0.0.0 0.0.0.0 Dialer1 permanent
!
logging trap notifications
Note category of access list 1 = 2 CCP_ACL
access-list 1 permit 172.20.2.0 0.0.0.255
Note access-list category 2 CCP_ACL = 2
access-list 2 allow 10.10.10.0 0.0.0.255
Note access-list 100 category CCP_ACL = 4
Note access-list 100 IPSec rule
access-list 100 permit ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
Note CCP_ACL the access list 101 = 2 category
Note access-list 101 IPSec rule
access-list 101 deny ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
access-list 101 permit ip 172.20.2.0 0.0.0.255 any
Note access-list 102 CCP_ACL category = 2
Note access-list 102 IPSec rule
access-list 102 deny ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
access-list 102 permit ip 10.10.10.0 0.0.0.255 any
!!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 101
!
allowed SDM_RMAP_2 1 route map
corresponds to the IP 102
!
!
control plan
!
!
Line con 0
line to 0
line vty 0 4
length 0
transport input telnet ssh
!
Scheduler allocate 20000 1000
NTP-Calendar Update
NTP 172.20.2.250 Server prefer
endAs I mentioned previously: suspicion is much appreciated!
Best regards
Joerg
Joerg,
ASA receives not all VPN packages because IOS does not send anything.
Try to send packets to the 1841 LAN to LAN of the ASA and see is the "sh cry ips its" on the 1841 increments the encrypted packets (there not)
The problem seems so on the side of the router.
I think that is a routing problem, but you only have one default gateway (no other channels on the router).
The ACL 100 is set to encrypt the traffic between the two subnets.
It seems that the ACL 101 is also bypassing NAT for VPN traffic.
Follow these steps:
Try running traffic of LAN router inside IP (source of ping 192.168.37.x 172.20.2.254) and see if the packages are not through the translation and obtaining encrypted.
I would also like to delete 100 ACL from the inside interface on the router because it is used for the VPN. You can create an another ACL to apply to the interface.
Federico.
-
Client VPN will travel not connected via 877w
Hello
I've implemented a Cisco 877w and it works very well for web access
Client VPN on my laptop connects via the 877w and authenticates on my remote work ASA5510 firewall.
Problem is after you connect to the ASA, I can not connect anything internally work network (10.0.0.0/24), ping, etc. RDP is back with no answer.
I've attached the config, can someone tell me what I am missing, might access a list?
Thanks for your help
Chris
This router is made PAT/NAT, Ipsec blocking.
Activate Nat on the ASA course remote.
ISAKMP nat - t or crypto isakmp nat - t
HTH
Sangaré
Pls rate helpful messages
-
All,
I use the cisco ASA 5500 vpn device, and I need a specific configuration where clients vpn (vpn without customer) would authenticate in an external radius server.
My problem is that I need to do different bookmarks for different users, so how can I do if my clients are not in the local database? (I do not even have accounts configured on the cisco device), DAP would be the solution?
TKS in advance
You are absolutely right. You can configure DAP to make specific bookmarks according to which the user connects via the WebVPN (Clientless SSL VPN).
-
IPSec vpn cisco asa and acs 5.1
We have configured authentication ipsec vpn cisco asa acs 5.1:
Here is the config in cisco vpn 5580:
standard access list acltest allow 10.10.30.0 255.255.255.0
RADIUS protocol AAA-server Gserver
AAA-server host 10.1.8.10 Gserver (inside)
Cisco key
AAA-server host 10.1.8.11 Gserver (inside)
Cisco key
internal group gpTest strategy
gpTest group policy attributes
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list acltest
type tunnel-group test remote access
tunnel-group test general attributes
address localpool pool
Group Policy - by default-gpTest
authentication-server-group LOCAL Gserver
authorization-server-group Gserver
accounting-server-group Gserver
IPSec-attributes of tunnel-group test
pre-shared-key cisco123
GBA, we config user group: VPN users. all VPN users in this group. ACS can visit his political profile: If the user in the 'VPN users' group, access ACS.
When we connect from a VPN Client to the server, all users connect to success. When you see the parser in ACS journal, each user success connect also get
error:
22040 wrong password or invalid shared secret
(pls see picture to attach it)
the system still works, but I don't know why, we get the error log.
Thanks for any help you can provide!
Duyen
Hello Duyen,
I think I've narrowed the issue. When remote access VPN using RADIUS authentication we must keep in mind that authentication and authorization are included on the same package.
Depending on your configuration, the ACS is defined as a server RADIUS (Gserver Protocol radius aaa server) and becomes the VPN Tunnel authenticated and 'authorized' on this server group:
authentication-server-group LOCAL Gserver
authorization-server-group Gserver
As noted above, the RADIUS of request/response includes authentication and authorization on the same package. This seems to be a problem of incorrect configuration that we should not set up the 'permission' in the Tunnel of the group.
Please remove the authorization under the Tunnel of Group:
No authorization-server-group Gserver
Please test the connection again and check the logs of the ACS. At this point there are only sucessful newspaper reported on the side of the ACS.
Is 'Permission-server-group' LDAP permission when authenticating to a LDAP server so to retrieve the attributes of permission on the server. RAY doesn't have the command as explained above.
I hope this helps.
Kind regards.
-
Use the client VPN tunnel to cross the LAN-to-LAN tunnel
I have been troubleshooting an issue and cannot cross an obstacle. The ASA is running ASA running 1,0000 code 24. I am using a client VPN tunnel to connect to the ASA. The ASA has already a LAN-to-LAN tunnel, set up and operating and I need the VPN client to access the remote site over the LAN-to-LAN tunnel.
The internal IP address of the local part is 192.168.0.0/24 and the IP address of the Remote LAN-to-LAN tunnel is 172.20.1.0/24. The clients are distributed 192.168.200.0/24 IPs. I have attached the relevant configuration for the SAA.
When the VPN client on the network, I can access resources on the ASA network internal. On the internal network of the SAA, users can access resources through the LAN-to-LAN tunnel. Client VPN cannot access resources on the LAN-to-LAN tunnel. For the latter, there are no hits on the C-TEST access list.
Thank you for your help.
try adding...
permit same-security-traffic intra-interface
-
site to site vpn with ASA 5500 series SSL?
We have routers DLink DIR - 130 5505 s ASA and PIXen, all work well with our PIX 515E, we need to replace.
We also have Internet satellite in two places. High latency makes IPsec VPN to DLinks on these very slow sites.
We were informed by HughesNet that a SSL VPN will mitigate some of the problems of latency.
However, we cannot use a VPN client for the biometric timeclocks in these places, the clocks need static IP addresses and are more or less "dumb terminals".
The machine of series 5000 ASA VPN site to site similar to OpenVPN or only the most comment client-server type SSL VPN connections?
Thank you, Tom
Hi Thomas,
The SSL VPN on ASAs feature is a client/server relationship where the remote computer can connect without client (browser) or clientbased (AnyConnect) to the ASA.
Federico.
-
Client VPN PIX a weird question
Hello
I have a pix501 that several clients are VPNing in. The problem is that when they open their clients (ver. 4.602.0011), there is a default name in the user name text field. Each time, they try VPN in they must remove the name and put their own name in. I tried this on an asa and I can't reproduce. What Miss me?
Thanks in advance!
Hello
The issue could be with the file .pcf for connection of PIX including the 'User name' populated field. Go to the installation directory of the client VPN on your PC.
Then go to the folder "Profiles" and select the corresponding to the PIX .pcf file. Once you open that, you will find the 'User name' populated field. Delete the value where theusername and then try to connect.
Let me know if it helps!
Kind regards
Assia
Maybe you are looking for
-
Thumbnails do not appear on a site. I just upgraded.
When I was on the Beta with 2.2 I had this same problem, you have helped me before, but it was so confusing. I told the owner of the web he had to adjust his script for 2.2 what can I do in the meantime? I can add a screenshot if I need to.
-
I can hit not only enter to access a web page. Now, I hit the arrow on the right side of the address bar.
-
I can't order a photo calendar
After you write the shipping address, a message informs you that the country code is missing. But I have already included the phone number, with + 852 as indicative of hong kong. so, what's the problem? Please kindly advise asap
-
Computer stops after 30-40 minutes
original title: after getting started, computer will not run longer than 30 to 40 minutes before it stops. have to wait 30 to 40 minutes before he will return. Ben said fan does not work. checked both and the two sems to work. said also that it might
-
HP Pavilion Dv4-1465dx: Adobe Reader 9.0
How can I fix the Adobe reader on my laptop, I can't print from her or from the internet. I have Adober Reader 9.0, I tried the upgrade, it will allow me to download updates, but it will not install them. Then uninstalled Adobe 9.0 and it still does