Client VPN gets incorrect SPI size Pix
Try to get a customer VPN connected with a pix515e. PIX is 6.3 (3) running. Customer is 4.0.4 we get same errors of dial-up, cable modems, etc.
The connection drops just during the negotiation. We thought it might be something MTU, but have you tried each MTU under the Sun, and the error remains the same for all connections regardless of MTU.
I have attached the config of the pix, the log of the VPN client and the pix debugging messages.
Thanks for any help someone can provide...
your proposal of IKE on the PIX is the following:
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 aes-256 encryption
ISAKMP policy 20 chopping sha
20 5 ISAKMP policy group
But this (http://www.cisco.com/univercd/cc/td/doc/product/vpn/client/rel4_0/admin_gd/vcach6.htm#1157757) shows that the VPN client does not support this proposal. Change your group to 2, and then try again. 5 Diffie-Hellman group is supported only when you use digital certificates, which you're not.
Tags: Cisco Security
Similar Questions
-
PIX - PIX VPN and Client VPN - cannot access core network
I hub and spoke PIX and a VPN Client that connects to speak it PIX, much the same as the example configuration here: -.
This example shows the client VPN access to the network behind PIX RADIUS. I want the client to also be able to access the central network, i.e. the client connects to the pix speaks via vpn, and traffic is routed through the vpn to PIX - PIX to the central site.
How this would change the configuration contained in the example?
See you soon,.
Jon
You can not do this, the PIX cannot route a package back on the same interface, it is entered in the. The only way to do that is to have the client connect to the hub PIX, but then they would not be able to get to the network behind PIX distance either.
Or that the customer would connect on a different interface in the PIX of distance, but this would mean another connection ISP on this PIX. Example of config is here: http://www.cisco.com/warp/public/110/client-pixhub.html
-
PIX-to-client VPN and how to reach on other interfaces systems
Hi all
I've implemented a Pix-to-Client VPN and it seems works ok.
As you can see, customer gets the same inside the class address (192.168.100.x) so I can reach across systems.
My questions are:
If I give different subnet pool addresses, how can 1 I still reach inside systems?
2 if I have other systems on these interfaces such dmz1 (192.168.10.0) dmz2 (192.168.20.0) how to get to these systems of the
even the client vpn access?
Concerning
Alberto Brivio
IP local pool vpnpool1 192.168.100.70 - 192.168.100.80
access-list 102 permit ip 192.168.100.0 255.255.255.0 192.168.100.0 255.255.255.0
NAT (inside) - 0 102 access list
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp - esp-md5-hmac trmset1
Crypto-map dynamic map2 10 set transform-set trmset1
map map1 10 ipsec-isakmp crypto dynamic map2
map1 outside crypto map interface
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address vpnpool1 pool test
vpngroup split tunnel 102 test
vpngroup test 1800 idle time
test vpngroup password *.
It is generally preferable to use another range of IP addresses. The PIX will know that the VPN Client uses that vary and route it properly whitch is not the case when you are using the same IP range as the inside interface.
To access another interface use the SHEEP (your ACL 102) access list which disables NAT between the VPN and the neworks to which you want to connect.
Example of config:
access-list allowed SHEEP Internalnet ISubnetMask VPN-pool 255.255.255.0 ip
access-list allowed SHEEP DMZnet DMZSubnetMask VPN-pool 255.255.255.0 ip
NAT (inside) 0 SHEEP
AAA-server local LOCAL Protocol
AAA authentication secure-http-client
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS
Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS
card crypto 65535 REMOTE ipsec-isakmp dynamic outside_dyn_map
REMOTE client authentication card crypto LOCAL
interface card crypto remotely outside
ISAKMP allows outside
ISAKMP identity address
ISAKMP nat-traversal 20
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
IP pool local VPNPool x.y.z.1 - x.y.z.254
vpngroup VPNGroup address pool VPNPool
vpngroup VPNGroup dns-server dns1 dns2
vpngroup VPNGroup default-domain localdomain
vpngroup idle 1800 VPNGroup-time
vpngroup VPNGroup password grouppassword
username, password vpnclient vpnclient-password
sincerely
Patrick
-
How can I get the Client VPN or NAT - ted connection
I installed a router on a customer site to replace a PC that made the NAT on a cable modem connection.
On the router THAT NAT is done to get all the s PC on the LAN to access the Internet.
But... one of the users use a VPN client to get to his office. With the PC, there is no problem, but given that the router is in place it can not connect.
Because I specialized on switched networks my knowledge; edge of NAT and VPN clients.
Is there anyone who knows how to get this VPN client-session user to be NAT - ted?
Kind regards
Martijn Koopsen
If you have some onfigured of overload, then you tap the traffic. In all cases, you should at least be able to establish a connection, as IPSec uses UDP 500 for the negotiation of the tunnel. If you are not able to pass all traffic, it is another question. Once the tunnel is established, the traffic can be encrypted using the Protocol ESP who cannot be tapped under normal circumstances. If this is a cisco IPsec client, then you must discover which is the feature of termination. If it's a hub 3K, you could activate IPSec over UDP to the problem of circumvention the ESP
Hope that helps
Jean Marc
-
The VPN client VPN connection behind other PIX PIX
I have the following problem:
I wanted to establish the VPN connection the client VPN to PIX on GPRS / 3G, but I didn t have a bit of luck with PIX IOS version 6.2 (2).
So I upgraded PIX to 6.3 (4) to use NAT - T and VPN client to version 4.0.5
I have configured PIX with NAT-T(isakmp nat-traversal 20), but I still had a chance, he would not go through the 1st phase. As soon as I took nat-traversal isakmp off he started working, and we can connect to our servers.
Now, I want to connect to the VPN client behind PIX to our customer PIX network. VPN connection implements without problem, but we can not access the servers. If I configure NAT - T on the two PIX, or only on the customer PIX or only on our PIX, no VPN connection at all.
If I have to connect VPN client behind PIX to the customer's network and you try to PING DNS server for example, on our PIX, I have following error:
305006: failed to create of portmap for domestic 50 CBC protocol translation: dst outside:194.x.x.x 10.10.1.x
194.x.x.x is our customer s address IP PIX
I understand that somewhere access list is missing, but I can not understand.
Of course, I can configure VPN site to site, but we have few customers and take us over their servers, so it'd just connect behind PIX VPN and client connection s server, instead of the first dial-in and then establish a VPN connection.
Can you please help me?
Thank you in advan
The following is extracted from ASK THE DISCUSSION FORUM of EXPERTS with Glenn Fullage of Cisco.
I've cut and pasted here for you to read, I think that the problem mentioned below:
Question:
Hi Glenn,.
Following is possible?
I have the vpn client on my PC, my LAN is protected by a pix. I can launch the vpn client to connect to remote pix. Authenticates the vpn client and the remote pix makes my PC with the assigned ip appropriate to its pool of ip address.
The problem that I am facing is that I can not anything across the pix remote ping from my PC which is behind my pix. Can you please guide me what I have to do to make this work, if it is possible?
My PC has a static ip address assigned with the default gateway appropriate pointing to my s pix inside interface.
Thank you very much for any help provided in advance.
Response from Glenn:
First of all, make sure that the VPN connection works correctly when the remote PC is NOT behind a PIX. If that works fine, but then breaks when put behind a PIX, it is probably that the PIX is PAT, which usually breaks IPSec. Add the following command on your PIX VPN client is behind:
fixup protocol esp-ike
See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/df.htm#wp1067379 for more details.
If it still has issues, you can turn on NAT - T on the remote PIX that ends the VPN, the client and the remote PIX must encapsulate then all IPSec in UDP packets that your PIX will be able to PA correctly. Add the following command on the remote PIX:
ISAKMP nat-traversal
See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#wp1027312 for more details.
NAT - T is a standard for the encapsulation of the UDP packets inot IETF IPSec packets.
ESP IPSec (Protocol that use your encrypted data packets) is an IP Protocol, it is located just above IP, rather than being a TCP or UDP protocol. For this reason, it has no TCP/UDP port number.
A lot of features that make the translation of address of Port (PAT) rely on a single to PAT TCP/UDP source port number ' ing. Because all traffic is PAT would be at the same source address, must be certain uniqueness to each of its sessions, and most devices use the port number TCP/UDP source for this. Because IPSec doesn't have one, many features PAT fail to PAT it properly or at all, and the data transfer fails.
NAT - T is enabled on both devices of the range, they will determine during the construction of the tunnel there is a PAT/NAT device between them, and if they detect that there is, they automatically encapsulate every IPSec packets in UDP packets with a port number of 4500. Because there is now a port number, PAT devices are able to PAT it correctly and the traffic goes normally.
Hope that helps.
-
Client VPN PIX a weird question
Hello
I have a pix501 that several clients are VPNing in. The problem is that when they open their clients (ver. 4.602.0011), there is a default name in the user name text field. Each time, they try VPN in they must remove the name and put their own name in. I tried this on an asa and I can't reproduce. What Miss me?
Thanks in advance!
Hello
The issue could be with the file .pcf for connection of PIX including the 'User name' populated field. Go to the installation directory of the client VPN on your PC.
Then go to the folder "Profiles" and select the corresponding to the PIX .pcf file. Once you open that, you will find the 'User name' populated field. Delete the value where theusername and then try to connect.
Let me know if it helps!
Kind regards
Assia
-
Client VPN router IOS does not connect
Hi all
I'm having some trouble of Client VPN connection over the internet to our Cisco IOS router. Some help would be very appreciated!
On the VPN client log I get the following error messages:
---------------------------
...
573 16:32:13.164 21/12/05 Sev = WARNING/2 IKE/0xE3000099
Size invalid SPI (PayloadNotify:116)
574 16:32:13.164 21/12/05 Sev = Info/4 IKE/0xE30000A4
Invalid payload: said length of payload, 568, not enough Notification:(PayloadList:149)
575 16:32:13.164 21/12/05 Sev = WARNING/3 IKE/0xA3000058
Received incorrect message or negotiation is no longer active (message id: 0x00000000)
---------------------------
We get debugging on the router that I'm trying to connect:
---------------------------
router #debug isakmp crypto
...
21 Dec 16:32:16.089 AEDT: ISAKMP (0:0): received 203.153.196.1 packet dport 500 sport 500 SA NEW Global (N)
21 Dec 16:32:16.089 AEDT: ISAKMP: created a struct peer 203.153.196.1, peer port 500
21 Dec 16:32:16.089 AEDT: ISAKMP: new created position = 0x678939E0 peer_handle = 0 x 80000031
21 Dec 16:32:16.089 AEDT: ISAKMP: lock struct 0x678939E0, refcount IKE peer 1 for crypto_isakmp_process_block
21 Dec 16:32:16.089 AEDT: ISAKMP: 500 local port, remote port 500
21 Dec 16:32:16.089 AEDT: insert his with his 67B0AB34 = success
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): treatment ITS payload. Message ID = 0
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): payload ID for treatment. Message ID = 0
21 Dec 16:32:16.089 AEDT: ISAKMP (0:0): payload ID
next payload: 13
type: 11
ID of the Group: eggs
Protocol: 17
Port: 500
Length: 12
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): peer games * no * profiles
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 215
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is XAUTH
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is DPD
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 194
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 123
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is NAT - T v2
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment
21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is the unit
21 Dec 16:32:16.089 AEDT: ISAKMP: analysis of the profiles for xauth...
.....
21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): atts are not acceptable. Next payload is 3
21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): audit ISAKMP transform 12 against the policy of priority 3
21 Dec 16:32:16.093 AEDT: ISAKMP: 3DES-CBC encryption
21 Dec 16:32:16.093 AEDT: ISAKMP: MD5 hash
21 Dec 16:32:16.093 AEDT: ISAKMP: group by default 2
21 Dec 16:32:16.093 AEDT: ISAKMP: pre-shared key auth
21 Dec 16:32:16.093 AEDT: ISAKMP: type of life in seconds
21 Dec 16:32:16.093 AEDT: ISAKMP: life (IPV) 0x0 0 x 20 0xC4 0x9B
21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): pre-shared authentication offered but does not match policy.
21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): atts are not acceptable. Next payload is 3
---------------------------
You can apply the encryption the WAN interface card and check?
-
Client VPN connectivity problems
I use the cisco VPN client to connect to our network, located behind a 515E. The client is authenticated and gets an ip address but cannot ping or connect with one of the hosts. The connection is to a network of customers that is also behind a 515E. I have successfully connected using the same policy to other places and have had no problem. What confuses me, is that we have used to have a Netscreen firewall before and he had a netscreen vpn client which connected since their network with a problem. Is that something they need for their firewall so that we can get through the traffic?
Try to turn on NAT - T on your pix, by setting up:
ISAKMP nat-traversal 20
and configure the client vpn accordingly:
http://www.Cisco.com/warp/public/471/cvpn_3k_nat.html#conf_client
I think these discussions are useful:
-
HTTPS protocol between the client vpn and host of the internet through tunnel ipsec-parody
Hello
We have a cisco ASA 5505 and try to get the next job:
ip (192.168.75.5) - connected to the Cisco ASA 5505 VPN client
the customer gets a specific route for an internet address (79.143.218.35 255.255.255.255 192.168.75.1 192.168.75.5 100)
When I try to access the url of the client, I get a syn sent with netstat
When I try trace ASA package, I see the following:
1 FLOW-SEARCH ALLOW Not found no corresponding stream, creating a new stream
2 ROUTE SEARCH entry ALLOW in 0.0.0.0 0.0.0.0 outdoors
3 ACCESS-LIST Journal ALLOW Access-group outside_access_in in interface outside
outside_access_in list extended access permitted tcp everything any https eq
access-list outside_access_in note hyperion outside inside
4 IP-OPTIONS ALLOW 5 CP-PUNT ALLOW 6 VPN IPSec-tunnel-flow ALLOW 7 IP-OPTIONS ALLOW 8 VPN encrypt ALLOW outdoors upward upward outdoors upward upward drop (ipsec-parody) Parody of detected IPSEC When I try the reverse (i.e. from the internet host to vpn client), it seems to work:
1 FLOW-SEARCH ALLOW Not found no corresponding stream, creating a new stream
2 ROUTE SEARCH entry ALLOW in 192.168.75.5 255.255.255.255 outside
3 ACCESS-LIST Journal ALLOW Access-group outside_access_in in interface outside
outside_access_in of access allowed any ip an extended list
4 IP-OPTIONS ALLOW 5 VPN IPSec-tunnel-flow ALLOW 6 VPN encrypt ALLOW My question is why this phenomenon happens and how solve us this problem?
Thanks in advance, Sipke
our running-config:
: Saved
:
ASA Version 8.0 (4)
!
ciscoasa hostname
domain somedomain
activate the password - encrypted
passwd - encrypted
names of
name 10.10.1.0 Hyperion
name 164.140.159.x xxxx
name 192.168.72.25 xxxx
name 192.168.72.24 xxxx
name 192.168.72.196 xxxx
name 192.168.75.0 vpn clients
name 213.206.236.0 xxxx
name 143.47.160.0 xxxx
name 141.143.32.0 xxxx
name 141.143.0.0 xxxx
name 192.168.72.27 xxxx
name 10.1.11.0 xxxx
name 10.1.2.240 xxxx
name 10.1.1.0 xxxx
name 10.75.2.1 xxxx
name 10.75.2.23 xxxx
name 192.168.72.150 xxxx
name 192.168.33.0 xxxx
name 192.168.72.26 xxxx
name 192.168.72.5 xxxx
name 192.168.23.0 xxxx
name 192.168.34.0 xxxx
name 79.143.218.35 inethost
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.72.254 255.255.255.0
OSPF cost 10
!
interface Vlan2
nameif outside
security-level 0
IP address 193.173.x.x 255.255.255.240
OSPF cost 10
!
interface Vlan3
Shutdown
nameif dmz
security-level 50
192.168.50.1 IP address 255.255.255.0
OSPF cost 10
!
interface Vlan23
nameif wireless
security-level 80
192.168.40.1 IP address 255.255.255.0
OSPF cost 10
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
switchport access vlan 3
!
interface Ethernet0/6
switchport access vlan 23
!
interface Ethernet0/7
!
passive FTP mode
clock timezone THATS 1
clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00
DNS lookup field inside
DNS server-group DefaultDNS
domain pearle.local
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service RDP - tcp
Remote Desktop Protocol Description
EQ port 3389 object
object-group service UDP - udp VC
range of object-port 60000 60039
object-group VC - TCP tcp service
60000 60009 object-port Beach
object-group service tcp Fortis
1501 1501 object-port Beach
Beach of port-object 1502-1502
Beach of port-object sqlnet sqlnet
1584 1584 object-port Beach
1592 1592 object-port Beach
object-group service tcp fortis
1592 1592 object-port Beach
Beach of port-object 1502-1502
1584 1584 object-port Beach
Beach of port-object sqlnet sqlnet
1501 1501 object-port Beach
1500 1500 object-port Beach
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.50.0 255.255.255.0
object-network 192.168.72.0 255.255.255.0
object-network 192.168.40.0 255.255.255.0
object-network VPN_Pool_2 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
object-network 192.168.50.0 255.255.255.0
object-network 192.168.72.0 255.255.255.0
object-group network inside-networks
object-network 192.168.72.0 255.255.255.0
WingFTP_TCP tcp service object-group
Secure FTP description
port-object eq 989
port-object eq 990
DM_INLINE_TCP_1 tcp service object-group
port-object eq ftp
port-object eq ftp - data
Group object WingFTP_TCP
DM_INLINE_TCP_2 tcp service object-group
port-object eq ftp
port-object eq ftp - data
Group object WingFTP_TCP
the DM_INLINE_NETWORK_3 object-group network
object-network 192.168.72.0 255.255.255.0
object-network VPN_Pool_2 255.255.255.0
the DM_INLINE_NETWORK_4 object-group network
object-network 192.168.72.0 255.255.255.0
object-network VPN_Pool_2 255.255.255.0
object-group network Oracle
network-object OracleTwo 255.255.224.0
network-object OracleOne 255.255.240.0
network-object OracleThree 255.255.224.0
the DM_INLINE_NETWORK_5 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network Grandvision4
host of the object-Network GrandVision_PC
the DM_INLINE_NETWORK_6 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network Grandvision4
host of the object-Network GrandVision_PC
the DM_INLINE_NETWORK_7 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network GrandVision_PC
the DM_INLINE_NETWORK_8 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network GrandVision_PC
object-group service DM_INLINE_SERVICE_2
the purpose of the ip service
EQ-3389 tcp service object
the DM_INLINE_NETWORK_9 object-group network
network-object OracleThree 255.255.0.0
network-object OracleTwo 255.255.224.0
network-object OracleOne 255.255.240.0
object-group service DM_INLINE_SERVICE_3
the purpose of the ip service
EQ-3389 tcp service object
Atera tcp service object-group
Atera Webbased monitoring description
8001 8001 object-port Beach
8002 8002 object-port Beach
8003 8003 object-port Beach
WingFTP_UDP udp service object-group
port-object eq 989
port-object eq 990
WingFTP tcp service object-group
Description range of ports for the transmission of data
object-port range 1024-1054
HTTPS_redirected tcp service object-group
Description redirect WingFTP Server
port-object eq 40200
Note to inside_access_in to access list ICMP test protocol inside outside
inside_access_in list extended access allow icmp 192.168.72.0 255.255.255.0 any
Note to inside_access_in to access list ICMP test protocol inside outside
access-list inside_access_in note HTTP inside outside
inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 any eq www
access-list inside_access_in note queries DNS inside to outside
inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 no matter what eq field
access-list inside_access_in note the HTTPS protocol inside and outside
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any https eq
Note to inside_access_in to access list ICMP test protocol inside outside
access-list inside_access_in note 7472 Epo-items inside outside
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq 7472
access-list inside_access_in note POP3 inside outside
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq pop3
inside_access_in list extended access permit udp host LifeSize-PE-HQ any object-group UDP - VC
inside_access_in list extended access permit tcp host LifeSize-PE-HQ all eq h323
access-list inside_access_in note video conference services
inside_access_in list extended access permit tcp host LifeSize-PE-HQ any object-group VC - TCP
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any
Note to inside_access_in to access list Fortis
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any object-group Fortis
access extensive list ip 192.168.40.0 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any
inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any eq www
inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any https eq
inside_access_in allowed all Hyperion 255.255.255.0 ip extended access list
inside_access_in list extended access udp allowed any any eq isakmp
inside_access_in list extended access udp allowed any any eq ntp
inside_access_in list extended access udp allowed any any eq 4500
inside_access_in list of allowed ip extended access any Oracle object-group
inside_access_in list extended access udp allowed any any eq 10000
access-list inside_access_in note PPTP inside outside
inside_access_in list extended access permit tcp any any eq pptp
access-list inside_access_in note WILL inside outside
inside_access_in list extended access will permit a full
Note to inside_access_in to access the Infrastructure of the RIM BES server list
inside_access_in list extended access permit tcp host BESServer any eq 3101
inside_access_in list extended access permit tcp any any DM_INLINE_TCP_2 object-group
inside_access_in list extended access permit tcp any any HTTPS_redirected object-group
access extensive list ip Hyperion 255.255.255.0 inside_access_in 255.255.255.0 allow VPN_Pool_2
inside_access_in list extended access permit udp any host 86.109.255.177 eq 1194
access extensive list ip 192.168.72.0 inside_access_in allow 255.255.255.0 DM_INLINE_NETWORK_7 object-group
access extensive list ip VPN_Pool_2 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access deny ip any any inactive debug log
Note to outside_access_in to access list ICMP test protocol outside inside
outside_access_in list extended access permit icmp any one
access-list outside_access_in Note SMTP outside inside
outside_access_in list extended access permit tcp any any eq smtp
outside_access_in list extended access udp allowed any any eq ntp disable journal
access-list outside_access_in note 7472 EPO-items outside inside
outside_access_in list extended access permit tcp any any eq 7472
outside_access_in list extended access permit tcp any any object-group inactive RDP
outside_access_in list extended access permit tcp any any eq www
outside_access_in list extended access permit tcp any any HTTPS_redirected object-group
outside_access_in list extended access permitted tcp everything any https eq
access-list outside_access_in note hyperion outside inside
outside_access_in list extended access permitted tcp Hyperion 255.255.255.0 DM_INLINE_NETWORK_4 object-group
outside_access_in to access Hyperion 255.255.255.0 ip extended list object-group DM_INLINE_NETWORK_3 allow
outside_access_in list extended access permit tcp any host LifeSize-PE-HQ eq h323
outside_access_in list extended access permit tcp any host LifeSize-PE-HQ object-group VC - TCP
outside_access_in list extended access permit udp any host group-object-LifeSize-PE-HQ UDP - VC
outside_access_in of access allowed any ip an extended list
outside_access_in list extended access udp allowed any any eq 4500
outside_access_in list extended access udp allowed any any eq isakmp
outside_access_in list extended access udp allowed any any eq 10000
outside_access_in list extended access will permit a full
outside_access_in list extended access permit tcp any any eq pptp
outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group
outside_access_in list extended access allowed object-group ip DM_INLINE_NETWORK_8 192.168.72.0 255.255.255.0 inactive
outside_access_in list extended access permit tcp any any Atera object-group
outside_access_in list extended access deny ip any any inactive debug log
outside_1_cryptomap list extended access allowed object-group Hyperion DM_INLINE_NETWORK_2 255.255.255.0 ip
outside_1_cryptomap to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0
access extensive list ip 192.168.72.0 inside_nat0_outbound allow Hyperion 255.255.255.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access all 193.172.182.64 255.255.255.240
inside_nat0_outbound list of allowed ip extended access all 192.168.72.192 255.255.255.192
inside_nat0_outbound list of allowed ip extended access all 192.168.72.0 255.255.255.0
access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 VPN_Pool_2 255.255.255.0
access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_5 object-group
inside_nat0_outbound list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0
inside_nat0_outbound list of allowed ip extended access any Swabach 255.255.255.0
access-list 200 scope allow tcp all fortis of fortis host object-group
access extensive list ip VPN_Pool_2 outside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_9 object-group
outside_cryptomap_2 list extended access allowed object-group Hyperion DM_INLINE_NETWORK_1 255.255.255.0 ip
outside_cryptomap_2 to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0
Note Wireless_access_in of access list, select Hyperion / wifi access NAT rule.
Access extensive list ip 192.168.40.0 Wireless_access_in allow Hyperion inactive 255.255.255.0 255.255.255.0
Wireless_access_in list extended access deny ip 192.168.40.0 255.255.255.0 192.168.72.0 255.255.255.0
Comment by Wireless_access_in-list of the traffic Internet access
Access extensive list ip 192.168.40.0 Wireless_access_in allow 255.255.255.0 any
standard access list splittunnelclientvpn allow 192.168.72.0 255.255.255.0
splittunnelclientvpn list standard access allowed Hyperion 255.255.255.0
standard access list splittunnelclientvpn allow Pearleshare 255.255.255.0
splittunnelclientvpn list standard access allowed host 85.17.235.22
splittunnelclientvpn list standard access allowed OracleThree 255.255.224.0
standard access list splittunnelclientvpn allow 143.47.128.0 255.255.240.0
splittunnelclientvpn list standard access allowed host inethost
Standard access list SplittnlHyperion allow OracleThree 255.255.0.0
Standard access list SplittnlOOD allow OracleThree 255.255.0.0
Standard access list SplittnlOOD allow 143.47.128.0 255.255.240.0
access extensive list ip 192.168.72.0 outside_cryptomap allow 255.255.255.0 DM_INLINE_NETWORK_6 object-group
outside_cryptomap_1 list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0
outside_cryptomap_3 list of allowed ip extended access any Swabach 255.255.255.0
192.168.72.0 IP Access-list extended sheep 255.255.255.0 GrandVisionSoesterberg 255.255.255.0 allow
192.168.72.0 IP Access-list extended sheep 255.255.255.0 VPN_Pool_2 255.255.255.0 allow
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
MTU 1500 wireless
local pool VPN_DHCP 192.168.72.220 - 192.168.72.235 255.255.255.0 IP mask
mask 192.168.75.1 - 192.168.75.50 255.255.255.0 IP local pool VPN_Range_2
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 613.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (wireless) 1 192.168.40.0 255.255.255.0
public static tcp (indoor, outdoor) interface smtp smtp Mailsrv_Pearle_Europe netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ftp ftp netmask 255.255.255.255 Pearle-DC02
public static 990 Pearle-DC02 990 netmask 255.255.255.255 interface tcp (indoor, outdoor)
static (inside, outside) tcp 3389 3389 Mailsrv_Pearle_Europe netmask 255.255.255.255 interface
public static tcp (indoor, outdoor) interface www Pearle-DC02 www netmask 255.255.255.255
public static 40200 Pearle-DC02 40200 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static tcp (indoor, outdoor) interface https Exchange2010 https netmask 255.255.255.255
public static tcp (indoor, outdoor) interface h323 h323 LifeSize-PE-HQ netmask 255.255.255.255
public static 60000 60000 LifeSize-PE-HQ netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static (inside, outside) udp interface 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255
public static (inside, outside) udp interface 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255
public static (inside, outside) udp interface 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255
public static (inside, outside) udp interface 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255
public static (inside, outside) udp interface 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255
public static (inside, outside) udp interface 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255
public static (inside, outside) udp interface 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255
public static (inside, outside) udp interface 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255
public static (inside, outside) udp interface 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255
public static (inside, outside) udp interface 60010 LifeSize-PE-HQ 60010 netmask 255.255.255.255
public static (inside, outside) udp interface 60011 LifeSize-PE-HQ 60011 netmask 255.255.255.255
public static (inside, outside) udp interface 60012 LifeSize-PE-HQ 60012 netmask 255.255.255.255
public static (inside, outside) udp interface 60013 LifeSize-PE-HQ 60013 netmask 255.255.255.255
public static (inside, outside) udp interface 60014 LifeSize-PE-HQ 60014 netmask 255.255.255.255
public static (inside, outside) udp interface 60015 LifeSize-PE-HQ 60015 netmask 255.255.255.255
public static (inside, outside) udp interface 60016 LifeSize-PE-HQ 60016 netmask 255.255.255.255
public static (inside, outside) udp interface 60017 LifeSize-PE-HQ 60017 netmask 255.255.255.255
public static (inside, outside) udp interface 60018 LifeSize-PE-HQ 60018 netmask 255.255.255.255
public static (inside, outside) udp interface 60019 LifeSize-PE-HQ 60019 netmask 255.255.255.255
public static (inside, outside) udp interface 60020 LifeSize-PE-HQ 60020 netmask 255.255.255.255
public static (inside, outside) udp interface 60021 60021 LifeSize-PE-HQ netmask 255.255.255.255
public static (inside, outside) udp interface 60022 LifeSize-PE-HQ 60022 netmask 255.255.255.255
public static (inside, outside) udp interface 60023 LifeSize-PE-HQ 60023 netmask 255.255.255.255
public static (inside, outside) udp interface 60024 LifeSize-PE-HQ 60024 netmask 255.255.255.255
public static (inside, outside) udp interface 60025 LifeSize-PE-HQ 60025 netmask 255.255.255.255
public static (inside, outside) udp interface 60026 LifeSize-PE-HQ 60026 netmask 255.255.255.255
public static (inside, outside) udp interface 60027 LifeSize-PE-HQ 60027 netmask 255.255.255.255
public static (inside, outside) udp interface 60028 LifeSize-PE-HQ 60028 netmask 255.255.255.255
public static (inside, outside) udp interface 60029 LifeSize-PE-HQ 60029 netmask 255.255.255.255
public static (inside, outside) udp interface 60030 LifeSize-PE-HQ 60030 netmask 255.255.255.255
public static (inside, outside) udp interface 60031 LifeSize-PE-HQ 60031 netmask 255.255.255.255
public static (inside, outside) udp interface 60032 LifeSize-PE-HQ 60032 netmask 255.255.255.255
public static (inside, outside) udp interface 60033 LifeSize-PE-HQ 60033 netmask 255.255.255.255
public static (inside, outside) udp interface 60034 LifeSize-PE-HQ 60034 netmask 255.255.255.255
public static (inside, outside) udp interface 60035 LifeSize-PE-HQ 60035 netmask 255.255.255.255
public static (inside, outside) udp interface 60036 LifeSize-PE-HQ 60036 netmask 255.255.255.255
public static (inside, outside) udp interface 60037 LifeSize-PE-HQ 60037 netmask 255.255.255.255
public static (inside, outside) udp interface 60038 LifeSize-PE-HQ 60038 netmask 255.255.255.255
public static (inside, outside) udp interface 60039 LifeSize-PE-HQ 60039 netmask 255.255.255.255
public static (inside, outside) udp interface 60040 60040 LifeSize-PE-HQ netmask 255.255.255.255
public static Mailsrv_Pearle_Europe 7472 netmask 255.255.255.255 7472 interface tcp (indoor, outdoor)
public static LanSweep-XP netmask 255.255.255.255 8001 8001 interface tcp (indoor, outdoor)
public static 8002 8002 LanSweep-XP netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static LanSweep-XP netmask 255.255.255.255 8003 8003 interface tcp (indoor, outdoor)
static (inside, outside) 193.173.12.194 tcp https Pearle-DC02 https netmask 255.255.255.255
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Access-group Wireless_access_in in wireless interface
Route outside 0.0.0.0 0.0.0.0 193.173.12.206 1
Route outside OracleThree 255.255.224.0 193.173.12.198 1
Route outside 143.47.128.0 255.255.240.0 193.173.12.198 1
Route inside 172.27.0.0 255.255.255.0 Pearle-DC02 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication LOCAL telnet console
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.40.0 255.255.255.0 Wireless
http 192.168.1.0 255.255.255.0 inside
http 192.168.72.0 255.255.255.0 inside
http GrandVisionSoesterberg 255.255.255.0 inside
SNMP-server host inside 192.168.33.29 survey community public version 2 c
location of Server SNMP Schiphol
contact Server SNMP SSmeekes
SNMP-Server Public community
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set esp-aes-256 GRANDVISION esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
card crypto outside_map0 1 match address outside_cryptomap_1
outside_map0 card crypto 1jeu pfs
outside_map0 card crypto 1jeu peer 212.78.223.182
outside_map0 card crypto 1jeu transform-set ESP ESP-3DES-SHA-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-ESP ESP-3DES-MD5 MD5-DES-SHA ESP-DES-MD5
outside_map0 map 1 lifetime of security association set seconds 28800 crypto
card crypto outside_map0 1 set security-association life kilobytes 4608000
card crypto game 2 outside_map0 address outside_cryptomap_2
outside_map0 crypto map peer set 2 193.173.12.193
card crypto outside_map0 2 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5
life card crypto outside_map0 2 set security-association seconds 28800
card crypto outside_map0 2 set security-association life kilobytes 4608000
card crypto outside_map0 3 match address outside_1_cryptomap
outside_map0 card crypto 3 set pfs
outside_map0 card crypto 3 peers set 193.172.182.66
outside_map0 crypto map 3 the value transform-set ESP-3DES-SHA
life card crypto outside_map0 3 set security-association seconds 28800
card crypto outside_map0 3 set security-association life kilobytes 4608000
card crypto outside_map0 game 4 address outside_cryptomap
outside_map0 card crypto 4 peers set 213.56.81.58
outside_map0 4 set transform-set GRANDVISION crypto card
life card crypto outside_map0 4 set security-association seconds 28800
card crypto outside_map0 4 set security-association life kilobytes 4608000
card crypto outside_map0 5 match address outside_cryptomap_3
outside_map0 card crypto 5 set pfs
outside_map0 crypto card 5 peers set 86.109.255.177
outside_map0 card crypto 5 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5
life card crypto outside_map0 5 set security-association seconds 28800
card crypto outside_map0 5 set security-association life kilobytes 4608000
Crypto map outside_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
outside_map0 interface card crypto outside
crypto ISAKMP allow inside
crypto ISAKMP allow outside
crypto ISAKMP enable dmz
crypto ISAKMP enable wireless
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.72.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.72.0 255.255.255.0 inside
SSH GrandVisionSoesterberg 255.255.255.0 inside
SSH 213.144.239.0 255.255.255.192 outside
SSH timeout 5
Console timeout 0
management-access inside
dhcpd dns 194.151.228.18 is 10.10.1.100
dhcpd outside auto_config
!
dhcpd address 192.168.72.253 - 192.168.72.253 inside
!
dhcpd address dmz 192.168.50.10 - 192.168.50.50
dhcpd enable dmz
!
dhcpd address wireless 192.168.40.10 - 192.168.40.99
dhcpd dns 194.151.228.18 wireless interface
dhcpd activate wireless
!
a basic threat threat detection
host of statistical threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Group Policy "pearle_vpn_Hyp only" internal
attributes of Group Policy "pearle_vpn_Hyp only".
value of server WINS 192.168.72.25
value of server DNS 192.168.72.25
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list SplittnlHyperion
Split-dns value pearle.local
internal pearle_vpn_OOD_only group policy
attributes of the strategy of group pearle_vpn_OOD_only
value of Split-tunnel-network-list SplittnlOOD
internal pearle_vpn group policy
attributes of the strategy of group pearle_vpn
value of server WINS 192.168.72.25
value of server DNS 192.168.72.25
Protocol-tunnel-VPN IPSec l2tp ipsec svc
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list splittunnelclientvpn
Pearle.local value by default-field
Split-dns value pearle.local
username anyone password encrypted password
username something conferred
VPN-group-policy pearle_vpn_OOD_only
type of remote access service
tunnel-group 193 type ipsec-l2l
tunnel-group 193 ipsec-attributes
pre-shared-key *.
tunnel-group 193.173.12.193 type ipsec-l2l
IPSec-attributes tunnel-group 193.173.12.193
pre-shared-key *.
NOCHECK Peer-id-validate
type tunnel-group pearle_vpn remote access
tunnel-group pearle_vpn General-attributes
address pool VPN_Range_2
Group Policy - by default-pearle_vpn
pearle_vpn group of tunnel ipsec-attributes
pre-shared-key *.
type tunnel-group Pearle_VPN_2 remote access
attributes global-tunnel-group Pearle_VPN_2
address pool VPN_Range_2
strategy-group-by default "pearle_vpn_Hyp only".
IPSec-attributes tunnel-group Pearle_VPN_2
pre-shared-key *.
tunnel-group 213.56.81.58 type ipsec-l2l
IPSec-attributes tunnel-group 213.56.81.58
pre-shared-key *.
tunnel-group 212.78.223.182 type ipsec-l2l
IPSec-attributes tunnel-group 212.78.223.182
pre-shared-key *.
tunnel-group 86.109.255.177 type ipsec-l2l
IPSec-attributes tunnel-group 86.109.255.177
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the pptp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:7d4d9c7ca7c865d9e40f5d77ed1238eb
: end
ASDM image disk0: / asdm - 613.bin
ASDM BESServer 255.255.255.255 inside location
ASDM VPN_Pool_2 255.255.255.0 inside location
ASDM OracleTwo 255.255.224.0 inside location
ASDM OracleOne 255.255.240.0 inside location
ASDM OracleThree 255.255.224.0 inside location
ASDM location Exchange2010 255.255.255.255 inside
ASDM location Grandvision 255.255.255.0 inside
ASDM Grandvision2 255.255.255.240 inside location
ASDM Grandvision3 255.255.255.0 inside location
ASDM Grandvision4 255.255.255.255 inside location
ASDM GrandVision_PC 255.255.255.255 inside location
ASDM location LanSweep-XP 255.255.255.255 inside
ASDM GrandVisionSoesterberg 255.255.255.0 inside location
ASDM location Pearle-DC02 255.255.255.255 inside
ASDM location Pearle-WDS 255.255.255.255 inside
ASDM location Swabach 255.255.255.0 inside
ASDM GrandVisionSoesterberg2 255.255.255.0 inside location
don't allow no asdm history
Where is that host (inethost)? Inside of the ASA, or on the internet (on the outside)?
If it is outside, you must configure the NAT for the pool of vpn as you turn on the SAA.
NAT (outside) 1 192.168.75.0 255.255.255.0
-
Traffic of Client VPN routing via VPN Site to Site
Hello
We have the following scenario:
- Office (192.168.2.x)
- Data Center (212.64.x.x)
- Home workers (192.168.2.x) (scope DHCP is in the office subnet)
Connections:
- Desktop to Data Center traffic is routed through a Site at IPSec VPN, which works very well.
- Welcome to the office is routed through a Site IPSec VPN Client.
The question we have right now, is the Client VPN works, and we have implemented a split tunnel which includes only the subnet of the Office for a list of network.
What I have to do, is to route all traffic to home' to 'Data Center' by site to Site VPN is configured.
I tried to add the ranges of IP data center to the list of Client VPN Split tunnel, but when I do that and try to connect at home, I just get a "connection timed out" or denied, as if she was protected by a firewall?
Could you please let me know what I missed?
Result of the command: "show running-config"
: Saved
:
ASA Version 8.2(5)
!
hostname ciscoasa
domain-name skiddle.internal
enable password xxx encrypted
passwd xxx encrypted
names
name 188.39.51.101 dev.skiddle.com description Dev External
name 192.168.2.201 dev.skiddle.internal description Internal Dev server
name 164.177.128.202 www-1.skiddle.com description Skiddle web server
name 192.168.2.200 Newserver
name 217.150.106.82 Holly
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
shutdown
!
interface Ethernet0/4
shutdown
!
interface Ethernet0/5
shutdown
!
interface Ethernet0/6
shutdown
!
interface Ethernet0/7
shutdown
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address 192.168.3.250 255.255.255.0
!
!
time-range Workingtime
periodic weekdays 9:00 to 18:00
!
ftp mode passive
clock timezone GMT/BST 0
clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00
dns domain-lookup inside
dns server-group DefaultDNS
name-server Newserver
domain-name skiddle.internal
same-security-traffic permit inter-interface
object-group service Mysql tcp
port-object eq 3306
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group network rackspace-public-ips
description Rackspace Public IPs
network-object 164.177.132.16 255.255.255.252
network-object 164.177.132.72 255.255.255.252
network-object 212.64.147.184 255.255.255.248
network-object 164.177.128.200 255.255.255.252
object-group network Cuervo
description Test access for cuervo
network-object host Holly
object-group service DM_INLINE_TCP_1 tcp
port-object eq www
port-object eq https
object-group service DM_INLINE_TCP_2 tcp
port-object eq www
port-object eq https
object-group service DM_INLINE_TCP_3 tcp
port-object eq www
port-object eq https
object-group service DM_INLINE_TCP_4 tcp
port-object eq www
port-object eq https
access-list inside_access_in extended permit ip any any
access-list outside_access_in remark ENABLES Watermark Wifi ACCESS TO DEV SERVER!
access-list outside_access_in extended permit tcp 188.39.51.0 255.255.255.0 interface outside object-group DM_INLINE_TCP_4 time-range Workingtime
access-list outside_access_in remark ENABLES OUTSDIE ACCESS TO DEV SERVER!
access-list outside_access_in extended permit tcp any interface outside object-group DM_INLINE_TCP_3
access-list outside_access_in remark Public Skiddle Network > Dev server
access-list outside_access_in extended permit tcp 192.168.3.0 255.255.255.0 interface outside eq www
access-list outside_access_in extended permit tcp object-group rackspace-public-ips interface outside eq ssh
access-list outside_access_in remark OUTSIDE ACCESS TO DEV SERVER
access-list outside_access_in extended permit tcp object-group Cuervo interface outside object-group DM_INLINE_TCP_1 inactive
access-list outside_access_in extended permit tcp 192.168.3.0 255.255.255.0 host dev.skiddle.internal object-group DM_INLINE_TCP_2 inactive
access-list inside_access_in_1 remark HTTP OUT
access-list inside_access_in_1 extended permit tcp any any eq www
access-list inside_access_in_1 remark HTTPS OUT
access-list inside_access_in_1 extended permit tcp any any eq https
access-list inside_access_in_1 remark SSH OUT
access-list inside_access_in_1 extended permit tcp any any eq ssh
access-list inside_access_in_1 remark MYSQL OUT
access-list inside_access_in_1 extended permit tcp any host 164.177.128.200 object-group Mysql
access-list inside_access_in_1 remark SPHINX OUT
access-list inside_access_in_1 extended permit tcp any host 164.177.128.200 eq 3312
access-list inside_access_in_1 remark DNS OUT
access-list inside_access_in_1 extended permit object-group TCPUDP host Newserver any eq domain
access-list inside_access_in_1 remark PING OUT
access-list inside_access_in_1 extended permit icmp any any
access-list inside_access_in_1 remark Draytek Admin
access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 4433
access-list inside_access_in_1 remark Phone System
access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 35300 log disable
access-list inside_access_in_1 remark IPSEC VPN OUT
access-list inside_access_in_1 extended permit udp any host 94.236.41.227 eq 4500
access-list inside_access_in_1 remark IPSEC VPN OUT
access-list inside_access_in_1 extended permit udp any host 94.236.41.227 eq isakmp
access-list inside_access_in_1 remark Office to Rackspace OUT
access-list inside_access_in_1 extended permit ip 192.168.2.0 255.255.255.0 object-group rackspace-public-ips
access-list inside_access_in_1 remark IMAP OUT
access-list inside_access_in_1 extended permit tcp any any eq imap4
access-list inside_access_in_1 remark FTP OUT
access-list inside_access_in_1 extended permit tcp any any eq ftp
access-list inside_access_in_1 remark FTP DATA out
access-list inside_access_in_1 extended permit tcp any any eq ftp-data
access-list inside_access_in_1 remark SMTP Out
access-list inside_access_in_1 extended permit tcp any any eq smtp
access-list outside_1_cryptomap extended permit ip 192.168.2.0 255.255.255.0 object-group rackspace-public-ips
access-list inside_nat0_outbound extended permit ip 192.168.2.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.2.0 255.255.255.0 object-group rackspace-public-ips
access-list inside_nat0_outbound extended permit ip any 192.168.2.128 255.255.255.224
access-list inside_1_cryptomap extended permit ip 192.168.2.0 255.255.255.0 object-group rackspace-public-ips
access-list outside_1_cryptomap_1 extended permit tcp 192.168.2.0 255.255.255.0 object-group rackspace-public-ips eq ssh
access-list RACKSPACE-cryptomap_1 extended permit ip 192.168.2.0 255.255.255.0 object-group rackspace-public-ips
access-list RACKSPACE-TEST extended permit ip host 94.236.41.227 any
access-list RACKSPACE-TEST extended permit ip any host 94.236.41.227
access-list InternalForClientVPNSplitTunnel remark Inside for VPN
access-list InternalForClientVPNSplitTunnel standard permit 192.168.2.0 255.255.255.0
access-list InternalForClientVPNSplitTunnel remark Rackspace
access-list InternalForClientVPNSplitTunnel standard permit 164.177.128.200 255.255.255.252
access-list InternalForClientVPNSplitTunnel remark Rackspace
access-list InternalForClientVPNSplitTunnel standard permit 164.177.132.16 255.255.255.252
access-list InternalForClientVPNSplitTunnel remark Rackspace
access-list InternalForClientVPNSplitTunnel standard permit 164.177.132.72 255.255.255.252
access-list InternalForClientVPNSplitTunnel remark Rackspace
access-list InternalForClientVPNSplitTunnel standard permit 212.64.147.184 255.255.255.248
pager lines 24
logging enable
logging console debugging
logging monitor debugging
logging buffered debugging
logging trap debugging
logging asdm warnings
logging from-address [email protected]/* */
logging recipient-address [email protected]/* */ level errors
mtu inside 1500
mtu outside 1500
ip local pool CiscoVPNDHCPPool 192.168.2.130-192.168.2.149 mask 255.255.255.0
ip verify reverse-path interface inside
ip verify reverse-path interface outside
ipv6 access-list inside_access_ipv6_in permit tcp any any eq www
ipv6 access-list inside_access_ipv6_in permit tcp any any eq https
ipv6 access-list inside_access_ipv6_in permit tcp any any eq ssh
ipv6 access-list inside_access_ipv6_in permit icmp6 any any
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www dev.skiddle.internal www netmask 255.255.255.255
static (inside,outside) tcp interface ssh dev.skiddle.internal ssh netmask 255.255.255.255
access-group inside_access_in in interface inside control-plane
access-group inside_access_in_1 in interface inside
access-group inside_access_ipv6_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.3.254 10
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication telnet console LOCAL
aaa authentication enable console LOCAL
http server enable 4433
http 192.168.1.0 255.255.255.0 inside
http 192.168.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 86400
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set security-association lifetime seconds 28800
crypto map outside_map 1 match address RACKSPACE-cryptomap_1
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 94.236.41.227
crypto map outside_map 1 set transform-set ESP-AES-128-SHA
crypto map outside_map 1 set security-association lifetime seconds 86400
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca xxx
quit
crypto isakmp enable outside
crypto isakmp policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 192.168.1.0 255.255.255.0 inside
telnet 192.168.2.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcprelay server 192.68.2.200 inside
threat-detection basic-threat
threat-detection scanning-threat
threat-detection statistics host
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ntp server 194.35.252.7 source outside prefer
webvpn
port 444
svc image disk0:/anyconnect-macosx-i386-2.4.1012-k9.pkg 1 regex "Intel Mac OS X"
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec webvpn
group-policy skiddlevpn internal
group-policy skiddlevpn attributes
dns-server value 192.168.2.200
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value InternalForClientVPNSplitTunnel
default-domain value skiddle.internal
username bensebborn password *** encrypted privilege 0
username bensebborn attributes
vpn-group-policy skiddlevpn
username benseb password gXdOhaMts7w/KavS encrypted privilege 15
tunnel-group 94.236.41.227 type ipsec-l2l
tunnel-group 94.236.41.227 ipsec-attributes
pre-shared-key *****
tunnel-group skiddlevpn type remote-access
tunnel-group skiddlevpn general-attributes
address-pool CiscoVPNDHCPPool
default-group-policy skiddlevpn
tunnel-group skiddlevpn ipsec-attributes
pre-shared-key *****
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
policy-map global-policy
class inspection_default
inspect icmp
inspect icmp error
inspect ipsec-pass-thru
inspect ftp
!
service-policy global_policy global
smtp-server 164.177.128.203
prompt hostname context
call-home reporting anonymous
Cryptochecksum:6c2eb43fa1150f9a5bb178c716d8fe2b
: end
You must even-Security-enabled traffic intra-interface to allow communication between vpn VPN.
With respect,
Safwan
Remember messages useful rate.
-
problem with the HP 7310 - incorrect paper size fax
I have a hp 7310 printer/fax/copyer and everything that he was working great until that earlier
fax work perfect until we started to get a paper size incorrect message when receive us a fax
We set it up to 4 rings
We also have a fax set up report
I tried different formats (as well as in setting up fron a4, letter, legal)
even tried different weight
nothing seams to fix the problem
Thus, when receive us a fax, it rings 4 times... print a blank page... stop and it says wrong paper size... If you press ok, it prints the fax and fax report
any ideas?
don't know if it's a part of it as well when we're going to copy something the scaner it going long stubborn to scan... like 5 min it will print the item which has been fine scanded
Thank you
anyone until we change our all hp printers out for new... it will not a hp after that
-
Greetings,
Try to install the VPN clinet version 5.0.07.0290 on WinXP box.
Gets to a certain point then - error
Error 27850. Unable to manage the network components.
The corruption of the operating system can prevent installation.
I asked this question here before - and received responses instructioning me to uninstall the client.
This canoe do since there is no element installed in Add / Remove programs to point to uninstall. I deleted the folder created, but it makes no difference - each time the system stops at the same point.
Any other ideas?
Is your Windows XP 32-bit or 64-bit?
There are 2 version of VPN Client 5.0.07.0290:
32-bit: vpnclient-win-msi - 5.0.07.0290 - k9.exe
64-bit: vpnclient-winx64-msi - 5.0.07.0290 - k9.exe
Please, please make sure you use the right software.
Here are the steps that will allow the uninstall:
(1) remove the VPN Client (any version) of the machine using the MSI cleanup tool
http://support.Microsoft.com/kb/290301Updated the DNE using this deterministic networks link
http://www.deterministicnetworks.com/support/dnesupport.aspRun the WINFIX application, then the upgrade DNE.
(2) take a backup of the registry.
(3) on your desktop, click Start > run and type regedit.
(4) delete the following keys:(a) go to HKEY_LOCAL_MACHINE > SOFTWARE > Cisco Systems > customer VPN.
(b) go to HKEY_LOCAL_MACHINE > SOFTWARE > deterministic networks and remove the keys.
Note: Sometimes the system will not allow deletion of this key.(c) go to HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > uninstall > {5624c000-b109-11d4-9db4-00e0290fcac5}.
(d) delete all the old files deterministic NDIS Extender (DNE): all files starting with DNE, as all are coming files and Client VPN facilities.dne2000.sys %SystemRoot%\system32\drivers
dne2000m.inf and dne2000m.pnf of %SystemRoot%\inf(e) the enumeration of original manufacturers of hardware (OEM) of the dne2000.inf and dne2000.pnf files.
The OEM enumeration .inf file is a file called ".inf oem (digital value)."
For example, oem2.inf and oem2.pnf.Note: Be sure to remove only the DNE OEM files.
dneinobj.dll % SystemRoot%\system32. You may need to reboot for this file can be deleted.
(f) delete the following file: cvpndrv.sys to %SystemRoot%\system32\drivers
(5) reboot the machine.
(6) find the file CSGina.dll in the system32 folder rename it to CSGina.old
7-restart the machine.
(8) to disable any firewall if not installed.
Hope that helps.
-
I am trying to configure client vpn software ver 5.0 for remote to connect to the local network behind a 1801 users.
I can get the client saying its connected but traffic is not circulate outside in:
When I try to ping an address 192.168.2.x behind the 1801 I get a response from the public ip address but then when I try to ping to another address I have no answer.
I guess the question is associated with NAT.
Here is my config, your help is apprecited
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
host name C#.
!
boot-start-marker
boot-end-marker
!
enable password 7 #.
!
AAA new-model
!
AAA authentication login userauthen local
AAA authorization groupauthor LAN
!
AAA - the id of the joint session
!
IP cef
!
IP domain name # .local
property intellectual auth-proxy max-nodata-& 3
property intellectual admission max-nodata-& 3
!
Authenticated MultiLink bundle-name Panel
!
username password admin privilege 15 7 #.
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group 1801Client
key ##############
DNS 192.168.2.251
win 192.168.2.251
field # .local
pool VpnPool
ACL 121
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
!
map clientmap client to authenticate crypto list userauthen
card crypto clientmap isakmp authorization list groupauthor
client configuration address map clientmap throwing crypto
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!
Archives
The config log
hidekeys
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
!
interface FastEthernet0
address IP 87. #. #. # 255.255.255.252
IP access-group 113 to
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
clientmap card crypto
!
interface BRI0
no ip address
encapsulation hdlc
Shutdown
!
interface FastEthernet1
interface FastEthernet8
!
ATM0 interface
no ip address
Shutdown
No atm ilmi-keepalive
DSL-automatic operation mode
!
interface Vlan1
IP 192.168.2.245 255.255.255.0
IP nat inside
IP virtual-reassembly
!
IP pool local VpnPool 192.168.3.200 192.168.3.210
no ip forward-Protocol nd
IP route 0.0.0.0 0.0.0.0 87. #. #. #
!
!
no ip address of the http server
no ip http secure server
the IP nat inside source 1 interface FastEthernet0 overload list
IP nat inside source static tcp 192.168.2.251 25 87. #. #. # 25 expandable
Several similar to the threshold with different ports
!
access-list 1 permit 192.168.2.0 0.0.0.255
access-list 113 allow host tcp 82. #. #. # host 87. #. #. # eq 22
access-list 113 permit tcp 84. #. #. # 0.0.0.3 host 87. #. #. # eq 22
access-list 113 allow host tcp 79. #. #. # host 87. #. #. # eq 22
access-list 113 tcp refuse any any eq 22
access-list 113 allow host tcp 82. #. #. # host 87. #. #. # eq telnet
access-list 113 permit tcp 84. #. #. # 0.0.0.3 host 87. #. #. # eq telnet
access-list 113 allow host tcp 79. #. #. # host 87. #. #. # eq telnet
access-list 113 tcp refuse any any eq telnet
113 ip access list allow a whole
access-list 121 permit ip 192.168.2.0 0.0.0.255 192.168.3.0 0.0.0.255
access-list 121 allow ip 192.168.3.0 0.0.0.255 192.168.2.0 0.0.0.255
!
control plan
!
Line con 0
line to 0
line vty 0 4
transport input telnet ssh
!
end
you have ruled out the IP address of the customer the NAT pool
either denying them in access list 1
or do road map that point to the loopback address as a next hop for any destent package for your pool to avoid nat
first try to put this article in your access-lst 110
access-list 110 deny 192.168.2.0 0.0.0.255 192.168.3.0 0.0.0.255
access-list 110 permit 192.168.2.0 0.0.0.255 any
sheep allow 10 route map
corresponds to the IP 110
remove your old nat and type following one
IP nat inside source overload map route interface fastethernet0 sheep
rate if useful
and let me know, good luck
-
Connection with the client VPN for RV110W problem
Hi guys: I just installed a RV110W router to my small business and I try to connect via VPN from home client. I was unable to do so, no matter what I try. Relevant information:
1. I can connect to the router via remote very well management, so I know that the router is accessible from the Net.
2. internal address of the router: 10.81.208.1
3. active PPTP. PPTP server IP address: 10.0.0.1
4 IP addresses for PPTP clients: 10.0.0.10 - 14
5. two VPN clients added - one with PPTP, with the QuickVPN Protocol Protocol. Both are enabled (and Yes, I triple checked passwords)
6 encryption MPPE and Netbios active.
7 IPSec, PPTP and L2TP all active gateways.
8 VPN client: 1.4.1.2
9. computer: laptop running Windows 7 family (64-bit), with the firewall Windows is activated.
10 home network: 192.168.2.196
It is causing to tear my hair out. What Miss me?
Shannon
Hi Shannon,
I am pleased to see that you're progress.
Shannon Rotz wrote:
I changed the RM port to 443. Unfortunately, now I can't connect to the router via browser, either by remote management or from the local network - I get the usual "page cannot be displayed". How do I get back into the router configuration GUI?
You should be able to reach the GUI by typing https://192.168.1.1(assuming that you have not changed the default IP address) normally once you replace http (port 80) with https (port 443) the internal router web server automatically will redirect you to the https page if you type http. Open your command prompt and try to do a ping of the IP address of the router to ensure that it still meets this address
With regards to the VPN client: Up until I changed the port, the same error message kept coming up, i.e. "Unable to establish connection" (or something like that), with a list of possible reasons why it couldn't connect. Now the message has changed - I'm getting "Server's certificate doesn't exist on your local computer". If I continue trying to connect, then it says "Activating Policy", followed by "Verifying Network", then "The remote gateway is not responding. Do you want to wait?" This is definitely progress, since I never got this far before.
You are a quarter inch offline. If you look at the log.txt in C:\Program Cisco Small Business\QuickVPN Client, in my view, you will see "Failed to ping router remote VPN! This means that your PC is blocking the ping to the router response. Usually, if you look at this point the status of Client VPN in the router (first of all need to remote management) you will see that your user status is "connected." If the router thinks that the connection is established, but the PC does not work. You might want to try another PC at this stage to verify that it is indeed a problem with your PC. This problem is usually caused by the 3rd party software antivirus/firewall blocking the ping response. Microsoft Security Essentials can do this as well, so if you turn it off. If you do not have another PC to test from, call Cisco Small Business Support and ask a technician, try to connect to the lab. You can find the number to call here
On an impulse, I tried setting up a Windows VPN connection, i.e. created a new VPN connection in Network and Sharing Center, using a PPTP client ID that I had created. That connection actually worked, except for one problem: I can't see the remote network. If I could solve that problem, I'll just tell the other clients to use a Windows connection rather than QuickVPN.
Good thought. If you do not see the remote devices, make sure that they do not block VPN connections. (Windows or third-party firewall, antivirus, antispyware) With a connection, PPTP or QuickVPN, you should be able to go to run, type the IP address of the device that you want to connect to (i.e. \\192.168.1.101 ) and see the list of shared folders. After the PPTP connection is established, try to ping the address LAN IP of the router. If it is successful, try to ping a LAN device such as a network printer or a PC. Again, PCs may block ping requests if they have a firewall running watch so for this.
Answer please if you have any questions.
-
Client VPN Cisco router Cisco, MSW CA + certificates
Dear Sirs,
Let me approach you on the following problem.I wanted to use a secure between the Cisco VPN client connection
(Windows XP) and Cisco 2821 with certificate-based authentication.
I used the Microsoft certification authority (Windows 2003 server).
Cisco VPN client used eTokenPRO Aladdin as a certificate store.Certificate of MSW CA registration and implementation in eToken ran OK
Customer VPN Cisco doesn't have a problem with the cooperation of eToken.
Certificate of registration of Cisco2821 MSW ca ran okay too.Cisco 2821 configuration is standard. IOS version 12.4 (6).
Attempt to connect to the client VPN Cisco on Cisco 2821 was
last update of the error messages:ISAKMP: (1020): cannot get router cert or routerdoes do not have a cert: had to find DN!
ISAKMP: (1020): ITS been RSA signature authentication more XAUTH using id ID_FQDN type
ISAKMP (1020): payload ID
next payload: 6
type: 2
FULL domain name: cisco - ca.firm.com
Protocol: 17
Port: 500
Length: 25
ISAKMP: (1020): the total payload length: 25
ISAKMP (1020): no cert string to send to peers
ISAKMP (1020): peer not specified not issuing and none found appropriate profile
ISAKMP (1020): Action of WSF returned the error: 2
ISAKMP: (1020): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
ISAKMP: (1020): former State = new State IKE_R_MM5 = IKE_P1_COMPLETEIs there some refence where is possible to find some information on
This problem? There is someone who knows how to understand these mistakes?
Thank you very much for your help.Best regards
P.SonenberkPS Some useful information for people who are interested in the above problem.
Address IP of Cisco 2821 10.1.1.220, client VPN IP address is 10.1.1.133.
MSW's IP 10.1.1.50.
Important parts of the Cisco 2821 configuration:!
cisco-ca hostname
!
................
AAA new-model
!
AAA authentication login default local
AAA authentication login sdm_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization sdm_vpn_group_ml_1 LAN
!
...............
IP domain name firm.com
host IP company-cu 10.1.1.50
host to IP cisco-vpn1 10.1.1.133
name of the IP-server 10.1.1.33
!
Authenticated MultiLink bundle-name Panel
!
Crypto pki trustpoint TP-self-signed-4097309259
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 4097309259
revocation checking no
rsakeypair TP-self-signed-4097309259
!
Crypto pki trustpoint company-cu
registration mode ra
Enrollment url http://10.1.1.50:80/certsrv/mscep/mscep.dll
use of ike
Serial number no
IP address no
password 7 005C31272503535729701A1B5E40523647
revocation checking no
!
TP-self-signed-4097309259 crypto pki certificate chain
certificate self-signed 01
30820249 308201B 2 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
.............
FEDDCCEA 8FD14836 24CDD736 34
quit smoking
company-cu pki encryption certificate chain
certificate 1150A66F000100000013
30820509 308203F1 A0030201 02020 HAS 11 092A 8648 01000000 13300 06 50A66F00
...............
9E417C44 2062BFD5 F4FB9C0B AA
quit smoking
certificate ca 51BAC7C822D1F6A3469D1ADC32D0EB8C
30820489 30820371 A0030201 BAC7C822 02021051 D1F6A346 9D1ADC32 D0EB8C30
...............
C379F382 36E0A54E 0A6278A7 46
quit smoking
!
...................
crypto ISAKMP policy 30
BA 3des
md5 hash
authentication rsa-BA
Group 2
ISAKMP crypto identity hostname
!
Configuration group customer isakmp crypto Group159
key Key159Key
pool SDM_POOL_1
ACL 100
!
the crypto isakmp client configuration group them
domain firm.com
pool SDM_POOL_1
ACL 100
!
Crypto ipsec transform-set esp-3des esp-md5-hmac 3DES-MD5
!
crypto dynamic-map SDM_DYNMAP_1 1
the transform-set 3DES-MD5 value
market arriere-route
!
card crypto SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto
client configuration address map SDM_CMAP_1 crypto answer
map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
!
................
!
endstatus company-cu of Cisco-ca #show cryptographic pki trustpoints
Trustpoint company-cu:
Issuing CA certificate configured:
Name of the object:
CN = firm-cu, dc = company, dc = local
Fingerprint MD5: 5026582F 8CF455F8 56151047 2FFAC0D6
Fingerprint SHA1: 47B 74974 7C85EA48 760516DE AAC84C5D 4427E829
Universal router configured certificate:
Name of the object:
host name = cisco - ca.firm.com
Fingerprint MD5: E78702ED 47D5D36F B732CC4C BA97A4ED
Fingerprint SHA1: 78DEAE7E ACC12F15 1DFB4EB8 7FC DC6F3B7E 00138
State:
Generated keys... Yes (general purpose, not exportable)
Authenticated issuing certification authority... Yes
Request certificate (s)... YesCisco-ca #sh crypto pubkey-door-key rsa
Code: M - configured manually, C - excerpt from certificateName of code use IP-address/VRF Keyring
C Signature name of X.500 DN default:
CN = firm-cu
DC = company
DC = localC signature by default cisco-vpn1
IMPORTANT: I don't have a Cisco IOS Software: 12.4 (5), 12.3 (11) T08, 12.4 (4.7) PI03c,.
12.4 (4.7) T - there is error in the cryptographic module.Hey guys, it's weird that the router is not find cert after IKE is the cert and validates, it is certainly not reason, but I would go ahead and set up the mapping of certificate on this router to force the client to associate with Group of IKE, for that matter, that you need to change your config a bit for use iskamp profiles :
http://www.Cisco.com/en/us/docs/iOS/12_3t/12_3t8/feature/guide/gt_isakp.html
Maybe you are looking for
-
How can I check the status of the warranty online?
Hi my college has more than 500 Satellite Pro. Is there anywhere we can check our online warranty status so that we can assure us now when all of our laptops over their extended warranty. I know I could call Cust serv Center but its all in a few requ
-
I just got an email to sign up for the Motorola feedback network... I mean that I recorded before ot sign up for an early release of the 2.1 for the Cliq I was wondering if anyone else has this email, or if we were supposed to re-register once from t
-
I am unable to get GPRS settings in my g2 moto... Help help...
-
print the model 4630 printer stops after printing some of the jobs
I have a printer HP 4630 and not ok to print jobs print 1 or 2, but will not display a larger print job with stop. Help
-
When I restart my computer, my HDD continues to work long after the operating system is loaded. My computer is running slowly up to the end of everything it does. I added a software recently including Cisco software for my new router and adapter, i-t