Client vSphere 5.0 works on network, but not via the SSH tunnel

Similar Questions

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• Computer connects to the network, but not to the Internet, connect to the only local

  Hello world

  OK, so I have a HP computer with the installed version of Windows Vista Home Premium 32-bit. I've had it for almost 2 years now and have had no problems connecting to Internet... until now.

  I can connect to networks... both wireless and cable, but I can not get Internet. I used the IP, subnet mask, gateway and server settings DNS to another computer that works with this specific local network just to see what happens... my computer has failed.
  Until recently, I could connect to this WiFi connection in a coffee shop, but the last time I tried it didn't work. I've connected to the network but not the Internet. He told me that the DNS server did not. I'm starting to think that something is wrong with my computer.

  I saw that the solution for some people running the Norton removal tool, however I had uninstalled Norton almost as soon as I got my computer 2 years ago and ran McAfee instead. I don't think that Norton should have an impact on me more.

  Is there a solution to this problem... or I'll just have to try everything that is out there?

  Thanks for your help!

  Hi MomPlaysBass,

  Finally, my problem has been resolved - it wasn't my computer after all. The modem may only be connected to a computer. If you want to connect to another computer, you can connect the computer to the modem and then put it back. My computer worked fine after that. Whenever we want to switch between computers, even if I have to reset the modem.

  I don't think you have the same problem, but just in case, you can try to reset your modem - it's a button on the back or a small hole that you can reach with a pen... Hold the stylus for about 5 sec or maybe a bit more and then let go. That should reset your modem and might help you with your problem. Your computer should also have created a restore point... If all else fails maybe you can try to get back to the final point where your computer worked.

• HP Pavilion 2 x 10-N000NA: HP Pavilion x 2 10-N000NA connects to the network, but not to the internet

  Hello

  I have a problem with my HP Pavilion 2 x 10-N000NA Windows 10, 32-bit version...

  I have a router TP-Link W9980 and the laptop connects to the 2.4 GHz network, but there is no internet access.

  However, if I use a range extender (powerline TP-Link Wireless extender), it connects to the network and the internet!

  So, I guess that the equipment is working well, there must be a setting somewhere?

  I've updated all the drivers, etc. for the laptop and the router.

  Any ideas?  Thank you.

  Hello

  Well, the strangest thing happened!

  There was a huge update of Windows, and it seems to have solved the problem.

  Connections now say '(network) secure' or '(network) open' - which they did not before.

  So now that I know that the network was very good and it was a laptop problem which needed fixing.

  However, I do not know what exactly the update fixed, so I can not pass on any knowledge to solve the problem of someone else who suffer.

• ContextMenu working on 8120 but not on the 8900

  I have this application running on the OS 8120 v4.3.0.115 and 8900 OS v4.6.1.231 and get a strange problem with the context menu not appearing is not on the 8900 but for 8120 his job very well.

  This is my code:

      /*Override this to add custom menu items.*/
      protected void makeMenu( Menu menu )
          {
              Field focus = UiApplication.getUiApplication().getActiveScreen().getLeafFieldWithFocus();
              if(focus != null)
                  {
                  ContextMenu contextMenu = focus.getContextMenu();
                  if (contextMenu !=null)
                      {
                          menu.add(contextMenu);
                          menu.addSeparator();
                      }
                  }
              menu.addSeparator();
              menu.add(_closeItem);
          }
  

  Any who have similar problems with the context menu for ObjectChoiceField does not not on the 8900?

  figured it out. I have replace him-> public boolean trackwheelClick (int status, int time)
  and this for a reason any did not work with the 8900. Still strange that he worked on the 8100.

  But somehow rewrote this code and now its work on both devices.

• How can IM connected to the wireless network, but not to the internet, I fix?

  my laptop can no longer connect to the internet, but for the wireless network I can view other computers on the network, but can't go on the internet it says unidentified network.
  I took all the troubleshooting steps to resolve this problem without success.
  all ideas

  Scott,

  Are you the same Scott, I tried to help the last month? If this is you, I left a couple more views. In one of them, I explained that exactly the same problem you encounter happened on my son's computer. I just disabled the router, waited for about ten seconds and he turned his back and that's what it took. I used actually utility of Windows troubleshooting and he advised me to do.

• Loading an image works on Z10, but not on the Q5

  I use FilePicker to load an image from the library by using the following code

  Container {
          ...
  
          ImageView {
              id: imgView
              verticalAlignment: VerticalAlignment.Center
              horizontalAlignment: HorizontalAlignment.Center
              scalingMethod: ScalingMethod.AspectFit
              maxHeight: 250
              minHeight: 100
              bottomMargin: 30.0
  
          }
  
      }
      Container {
          verticalAlignment: VerticalAlignment.Bottom
          horizontalAlignment: HorizontalAlignment.Fill
          bottomPadding: 30.0
          leftPadding: 30
          rightPadding: 30
  
          Button {
              id: btnSelectImg
              topPadding: 25
              horizontalAlignment: HorizontalAlignment.Fill
              text: qsTr("Select Image") + Retranslate.onLocaleOrLanguageChanged
              onClicked: {
                  console.log("FilePicker")
                  picker.open()
              }
  
              attachedObjects: [
                  FilePicker { //image picker
                      id: picker
                      property string selectedFile
                      type: FileType.Picture
                      title: qsTr("Select Image") + Retranslate.onLocaleOrLanguageChanged
                      onFileSelected: {
                          imgView.imageSource = "file://" + selectedFiles[0];
                      }
  
                  }
              ]
          }
      }
  }
  

  Copy the following code to display the image correctly on Z10, but not on Q5 however both running the same version.

  No idea what could be the problem?

  It turns out that the problem is exactly as described by dbigham, ImageView can handle images up to a certain size depedning on the device.

  I added a C++ code to resize the image before feeding it to QML

  QML code:

  ImageView {
              id: imgView
              attachedObjects: [
                  ImageTracker {
                      id: imgViewTracker
  
                      onStateChanged: {
                          if (state == ResourceState.Loaded)
                          {
                              imgView.image = imgViewTracker.image
                              console.log("Shared image loaded correctly!")
                          }
                          else if (state == ResourceState.ErrorMemory)
                          {
                              console.log("Shared image load: Error Memory!")
                          }
                          else if (state == ResourceState.ErrorInvalidFormat || state == ResourceState.ErrorNotFound) {
                              console.log("Shared image load: " + state + "!")
                          }
                      }
                  },
                  FilePicker { //image picker
                      id: picker
                      property string selectedFile
                      type: FileType.Picture
                      title: qsTr("Select Image") + Retranslate.onLocaleOrLanguageChanged
                      onFileSelected: {
                          _app.loadImage(selectedFiles[0],300,200)
                          imgViewTracker.image = _app.image;
                      }
  
                  }
              ]
  
          }
  

  C++ code:

  void ApplicationUI::loadImage(QString strImageFileName, int width, int height)
   {
       QImage image;
  
       image.load(strImageFileName);
  
       image = image.scaled(width, height, Qt::KeepAspectRatioByExpanding);
  
       QImage swappedImage = image.rgbSwapped();
       if(swappedImage.format() != QImage::Format_RGB32) {
           swappedImage = swappedImage.convertToFormat(QImage::Format_RGB32);
       }
       const bb::ImageData imageData = bb::ImageData::fromPixels(swappedImage.bits(), bb::PixelFormat::RGBX, swappedImage.width(), swappedImage.height(), swappedImage.bytesPerLine());
  
       m_image = bb::cascades::Image(imageData);
       emit imageChanged();
   }
  
  QVariant ApplicationUI::image() const
   {
       return QVariant::fromValue(m_image);
   }
  

  C++ header:

  class ApplicationUI : public QObject
  {
  ...
  
  Q_PROPERTY(QVariant image READ image NOTIFY imageChanged)
  
  public:
  ...
  
  Q_INVOKABLE void loadImage(QString strImageFileName, int width, int height);
  
  signals:
  ...
  
  void imageChanged();
  
  private:
  ...
      QVariant image() const;
      bb::cascades::Image m_image;
  

• Rh9 link works in preview but not on the generated version

  Question: I have the theme with link to a MS Excel file. When I make a point of view, the link action behaves correctly, by displaying the file download dialog box. When I generate the layout (WebHelp), the link action does not respond.

  Notes:

  • The file appears in the two c:\appname\! SSL! \WebHelp\,rules_summary_1.xls , and c:\appname\Rules_Summary_1.xls

  (not sure if the case of filenames questions)

  • I created a test subject and got the same behavior

  Any ideas?

  Thank you

  -bruce.

  Hello

  It is probably the result of having Mark of The Web (MOTW) activated at the time of publication and that you view using Microsoft Internet Explorer as your browser.

  If you have decided to copy the files on a web server for your end users to open, the links should work properly.

  If you want to test your local PC to ensure that things work, you can disable MOTW and deal with problems of boxes dialog IE or you can relax in the Internet Explorer security to allow to run active content. Your call.

  What version of IE are you using?

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Vista can connect to other computers on the network, but not to the internet

  I have a Vista computer that I just reinstalled and it is connected through a router Thomson to a Win7 machine and internet (or at least it should be).  For some reason any Vista machine refers to the network as a public network that I can change this private and turn on discovery.  If I do that, then the machine Vista can see the Win7 machine through the router, but cannot connect to the internet.

  I tried to use the disk driver for the Thomson router on the Vista machine, but at the time wherever he tells me to connect cable internet installation program does not detect that the cable has been connected.

  Troubleshooting with software Vista suggests simply reboot the router (that I tried without success).  Needless to say that the Win7 machine connects to the internet fine.

  I was wondering whether to try to remove the connection and start again, but unable to do so because when the cable is plugged in tells me you cannot delete an active connection and when I disconnect the cable network connection disappears and so cannot be deleted.

  Grateful for pointers

  Ian

  Hi IanRC,

  Try the following steps.

  Step 1

  You can try to disable the antivirus software on your computer and check if it works. Activate antivirus once you check the status.

  Note An antivirus program is designed to help protect your computer against viruses. You must not download or open files from sources that you do not have trust, visit Web sites that do not trust, or open attachments when your antivirus program is disabled.

  Step 2

  Try the Microsoft Fixit. Open the link below and click it on the Fixit button.

  http://support.Microsoft.com/kb/928233

  Check if it works and post back the result.

  Bindu S -Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• New modem. HP laptop, wireless network, but not to the internet connection (local only)

  A wired connection works without problem. I try and wireless connection and it connects to the modem, but only on a "Local" basis only Other wireless devices connect without problem for example telephone, macbook. All solutions?

  Before doing the following, disconnect any WiFi network.

  Navigate to the following location:

  Control network and Internet\Network connections

  Right-click on the WLAN adapter you are using. Click on properties. On the Networking tab, look for Internet Protocol Version 4. Select it, and then click Properties. On the general tab, select the IP address automatically and DNS server automatically get an address. On the next tab, select automatic private IP address. Click Ok. Do the same for Internet Protocol Version 6 in addition, if you have. And then click Ok to close the Properties dialog box. Now try to connect.

  If the problem persists, answer here.

• Memory micro SD card works on phone, but not on the computer, Please HELP!

  Help, please

  History
  (1) I got a 8 GB Micro SD memory card, it worked fine for two years and then became corrupted, I formatted and it worked fine for about two months before, she has become corrupt again
  (2) this time when it became corrupt my phone always accepted, but the computer could not detect, weird, I decided to not format and continue to use on my phone
  (3) I decided to buy a new memory card and an adapter and then transfer the stuff over the old to the new, but I was shocked when the NEW memory card and a NEW adapter did not work and continued to say needs formatting, hmmm...
  (4) I decided to format it, but it says that it cannot be formatted... WHAT!
  (5) I put the new card in my phone, it works and I have format it on my phone instead... IT STILL DOES not work! Help me!!!

  I still think you should get a new card reader.  The adapters are not likely to be the problem.  On the other hand, I had a player go bad and yet still be "recognized" by the computer.

  It is possible, but probably not - IMO that reinstall the driver (if available; in general, however, these devices use drivers that come built-in to Windows) or a firmware update (if available for your drive in particular) could solve the problem.  What is the brand and model of your card reader?

  At the very least, you should see if you can find someone with a SDHC card reader and then see if you can read and format the card using your cards.

• Preloader works on homepage, but not on the subpage

  I work for this site is home to the preloder home page works fine. I put the preloader in the upper layer, but here at work page whose link is here works is not work fine same as homepage... would have some advice me what to do? because I did the same thing on the home page, but unfortunately I can't find any reason why his works very well on the WORK page.

  Thank you.

  Even I tested in 3 different browsers, Chrome, Firefox, and Edge, and it works very well in all the!

  Looks like the problem is solved!

• HP f4480 has worked with dv6 but not with the new dv7 after transfer windows easy

  F4480 will not be printed with the new laptop dv7, I can scan to laptop and the printer works with the old dv6 but it will not print and shows no errors. Print jobs just disappear.

  Have reinstalled several times with the removal of the pilot tool and all the info on this site.

  Me using fixed http://support.hp.com/us-en/document/c02554863 of HP diagnostic tools

  A rather well hidden resource.

• Series works in Fusion, but not on the site?

  I finally got my license key today and could enter my installed 3 merge (so far, used the temporary key) - but when I login on my VMWare account on the website and try to save the license all I get is an error "invalid series/license.

  Anyone with a similar problem?

  I'd rather have the license working and registered (in case of future updates) of a single semester...

  We are working through some problems with registration for orders at the beginning, but hope to have solved today.

  Pat

• Camera shake works in preview, but not in the final rendering.

  Hello. I tried Googling and searching forums and coming hands here is empty.

  I use After Effects of CS4 with the latest updates.

  I have a project with a unique model that contains an AVCHD clip related to an adjustment layer.

  I used the earthquake keyframe mode some fake camera shake by manipulating the 'Transform-> Position' field moments adaptation layer keys in the images. If I scrub through or do a preview (press 0 and let pre render) it looks fantastic with the music video of shake exactly how I like it.

  But when I save the project and add it to my queue to render the final output has * no * of the camera shake!

  I'm completely baffled as to why this might be. That said I only use AE for about a month so it is possible that I have made a simple noob mistake.

  The adjustment layer and the images are both the visible value. I see clearly the keyframes in the timeline panel and as I said the preview and cleaning shows the effect in action... But the final result (regardless of the format or resolution) have no shake in them either.

  Help!

  I just tried to do exactly the same thing and it works very well here.

  If you want, e-mail me your project folder (under the file video source) and I'll take a look: arozenfe (©) adobe.com