Computer connects to the network, but not to the Internet, connect to the only local

Hello world

OK, so I have a HP computer with the installed version of Windows Vista Home Premium 32-bit. I've had it for almost 2 years now and have had no problems connecting to Internet... until now.

I can connect to networks... both wireless and cable, but I can not get Internet. I used the IP, subnet mask, gateway and server settings DNS to another computer that works with this specific local network just to see what happens... my computer has failed.
Until recently, I could connect to this WiFi connection in a coffee shop, but the last time I tried it didn't work. I've connected to the network but not the Internet. He told me that the DNS server did not. I'm starting to think that something is wrong with my computer.

I saw that the solution for some people running the Norton removal tool, however I had uninstalled Norton almost as soon as I got my computer 2 years ago and ran McAfee instead. I don't think that Norton should have an impact on me more.

Is there a solution to this problem... or I'll just have to try everything that is out there?

Thanks for your help!

Hi MomPlaysBass,

Finally, my problem has been resolved - it wasn't my computer after all. The modem may only be connected to a computer. If you want to connect to another computer, you can connect the computer to the modem and then put it back. My computer worked fine after that. Whenever we want to switch between computers, even if I have to reset the modem.

I don't think you have the same problem, but just in case, you can try to reset your modem - it's a button on the back or a small hole that you can reach with a pen... Hold the stylus for about 5 sec or maybe a bit more and then let go. That should reset your modem and might help you with your problem. Your computer should also have created a restore point... If all else fails maybe you can try to get back to the final point where your computer worked.

Tags: Windows

Similar Questions

  • I can connect to the local network, but not to the internet

    Why in an internet connection, I can connect to the Local network, but not to the Internet.
    I have valid IP address and configuration is good.

    I recommend you read some threads here in the forum about similar issues.
    If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
    Using the WiFi network, you must check if the common WLan parameters are favourable;
    Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

    Good bye

  • HP Pavilion 2 x 10-N000NA: HP Pavilion x 2 10-N000NA connects to the network, but not to the internet

    Hello

    I have a problem with my HP Pavilion 2 x 10-N000NA Windows 10, 32-bit version...

    I have a router TP-Link W9980 and the laptop connects to the 2.4 GHz network, but there is no internet access.

    However, if I use a range extender (powerline TP-Link Wireless extender), it connects to the network and the internet!

    So, I guess that the equipment is working well, there must be a setting somewhere?

    I've updated all the drivers, etc. for the laptop and the router.

    Any ideas?  Thank you.

    Hello

    Well, the strangest thing happened!

    There was a huge update of Windows, and it seems to have solved the problem.

    Connections now say '(network) secure' or '(network) open' - which they did not before.

    So now that I know that the network was very good and it was a laptop problem which needed fixing.

    However, I do not know what exactly the update fixed, so I can not pass on any knowledge to solve the problem of someone else who suffer.

  • WRTG54S to connect to the network, but not internet

    I have a WRTG54S and Mediacom 12mbps. My router worked fine on my old laptop (a Dell Vista), he was sitting in a box for about 6 months and now that I have a new (Sony running 7) I can connect to my network, but not internet. I have updated the firmware of 7.6 to 7.8 without change. I have tried no security, wep and wap without change. Also, I cloned the MAC, once again no change. Windows cannot detect all problems, and when I try to activate the router to connect to the internet it always says connection failed. I can connect directly connected to the modem but not when connected to the router or wireless. Any ideas? Thank you

    Problem solved. I had to go to a Motorola SurfBoard 4100 to a 5100. Thanks anyway

  • Laptop connects to the network, but not Internet.

    I'm trying to fix a HP DV6000 laptop that can't connect to the Internet. It is running Vista Home Edition. It will connect to my LAN cable or wireless network, but not the Internet. I checked a few things and discovered that the TCP/IP protocol is missing. When I try to add using properties of LAN, TCP/IP is not an option.

    I did a complete system restore. System set!

  • Laptop detects the neighbouring network but not my home network?

    My problem is the following...

    My Hp Pavilion dv4 1225dx Vista SP1 computer laptop works very well on our router WRT160, computer laptop Dell Inspiron 8600 XP SP2 from husbands can detect the neighbouring network but not ours. Any suggestions, I searched the forums for answers with no luck.  Thanks in advance!

    Change the channel and SSID or.

  • Client vSphere 5.0 works on network, but not via the SSH tunnel

    Hoping someone can help you.

    Seems that others have this problem as well.

    Can connect to the network, but not through an SSH tunnel.

    On the network, I am invited to accept/ignore a SSL certificate.  This does not happen when trying to connect remotely (via an SSH tunnel).

    During troubleshooting, I port passed almost all the ports TCP, starting w / ports 80, 443 and 902.

    Through the SSH tunnel, via a browser, I can successfully access https://127.0.0.1 (VMware server), but the client software will not complete the connection, w / error message: «...» "The client could not send a request to the server."

    Any help would be appreciated.

    Thank you.

    Managed to understand this myself, having invested in a way more time I should have.

    This announcement in the hope that it will help others.

    In your SSH client, port forward with the help of one local loop, IP OTHER THAN 127.0.0.1 (such as 127.0.0.2 for example).

    Port 127.0.0.2:443 before--> IP:443 target

    127.0.0.2:902--> target IP:902

    127.0.0.2:903--> target IP:903

  • I can access network, but not the internet.

    I am able to access my network but not the internet.  However, I can get on the internet if I use parallels.  Does anyone else have this problem? If so, how have you managed to solve.  I rebooted without parallels and nothing changes.  Any suggestions?

    In the menu bar, you select

     ▹ System Preferences... ▹ ▹ ▹ Advanced TCP/IP network

    What values are given for the following?

    Configure IPv4

    IPv4 address

    Subnet mask

    Router

  • I installed Firefox (10) sync on my laptop instead of my desktop. How do I uninstall, so I can install on my main computer? In the only option of synchronization tools is "Synchronize now".

    Question
    I installed Firefox (10) sync on my laptop instead of my desktop. How do I uninstall, so I can install on my main computer? In the only option of synchronization tools is "Synchronize now".

    Hi Rachel!

    There is no need to uninstall anything, both devices will share information and that there are no 'master-slave' logic on Firefox Sync. All devices are identical.

    Take a look at this article which explains how to configure your computers: How can I set up Sync on my computer?

    The important part is to select "I already have an account" when you set up your second computer.

  • My laptop, connect to the network, but not the internet!

    My laptop connects to the network media blank but not internet. My roommates using the network can connect to the internet. I tried various things but not vain. I also tried to get in touch with the Virgin on this subject, but they can help. Is it my laptop and is there something special I need to do with a computer hp laptop. Help, please! Thank you!

    Hello

    On the Start Menu, click programs principally made, click Accessories, right-click on command prompt and select "Run as Administrator".  In the prompt, type the following commands, pressing on enter after each command.  Include spaces in the commands, as indicated.

    ipconfig/flushdns

    nbtstat-r

    nbtstat - RR

    netsh int ip reset c:\resetlog.txt

    netsh winsock reset

    Type exit and press ENTER.  Restart the PC and see if you can log in now.

    Kind regards

    DP - K

  • Wireless devices can see the wireless network but not connect

    Can someone please help?  I have a WRT54GS v2.  My wired computer accesses the Net fine, and I can see MAC address, IP address, DNS, subnet mask, default gateway in the navigation of the linksys software. The devices can see the network with strong bars but can't connect.

    Help!

    Thank you

    Yes, I tried all of these suggestions before posting and thank you for the reply.  I even called Comcast, my cable provider, in despair attempt to resolve.  Of course, they were no help, but it didn't end up being a problem, with what they should have helped me.

    By simple trial and error for several hours, I discovered that the domain name required to be filled in the first Panel of the router Linksys software.  The domain name resulted in the status panel but needed to be included in the initial group.  The forums I read had informed that some cable companies require the name of the computer and the domain name is filled and others not.  Obviously, if Comcast domain name must be filled out, but not the name of the computer.

  • Vista can connect to other computers on the network, but not to the internet

    I have a Vista computer that I just reinstalled and it is connected through a router Thomson to a Win7 machine and internet (or at least it should be).  For some reason any Vista machine refers to the network as a public network that I can change this private and turn on discovery.  If I do that, then the machine Vista can see the Win7 machine through the router, but cannot connect to the internet.

    I tried to use the disk driver for the Thomson router on the Vista machine, but at the time wherever he tells me to connect cable internet installation program does not detect that the cable has been connected.

    Troubleshooting with software Vista suggests simply reboot the router (that I tried without success).  Needless to say that the Win7 machine connects to the internet fine.

    I was wondering whether to try to remove the connection and start again, but unable to do so because when the cable is plugged in tells me you cannot delete an active connection and when I disconnect the cable network connection disappears and so cannot be deleted.

    Grateful for pointers

    Ian

    Hi IanRC,

    Try the following steps.

    Step 1

    You can try to disable the antivirus software on your computer and check if it works. Activate antivirus once you check the status.

    Note An antivirus program is designed to help protect your computer against viruses. You must not download or open files from sources that you do not have trust, visit Web sites that do not trust, or open attachments when your antivirus program is disabled.

    Step 2

    Try the Microsoft Fixit. Open the link below and click it on the Fixit button.

    http://support.Microsoft.com/kb/928233

    Check if it works and post back the result.

    Bindu S -Microsoft Support
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • 2 13 pro tablet of yoga - to connect to the network, but not the internet

    Hello!

    I got my new yoga today and immediately connect it to wifi...

    It connects to my home but not internet network (or connection very very creepy)

    tried home through my phone LTE and still...

    tried by bluetooth and same result... slow as hell... maybe approx. 10 KB.

    im looking good on the web and don't find anything...

    probobly you are the people with the experience...

    help would be appritiated!

    Kind regards.

    Hey guys quick update!

    After sending the lenovo Tablet and a few screams (sad that we cannot otherwise)

    they replace them with sealed brand new...

    so thanks for the help!

  • can connect to the network but not internet XP

    I use a computer on a local network xp, can connect to the network, ping the DNS server, gateway, etc.  However, I can't not conncet to internet.  When I ping a web address using the address of the site name or xxx.xxx.x.xx I have no success.  Tried to reset winsock, tcp/ip, without success.  Would appreciate any help.

    First course of action:

    1. turn off the PC.

    2. turn off the router.

    3. turn on the router.

    4. turn on the PC.

  • E-all-in-one printer, HP Photosmart 5520 connected to the network but not detected by computers

    Hello!

    My printer HP 5520 indicates that it is connected to my network, but the wireless printing does not work correctly.

    In the implementation of the process of the driver software the printer displayed after resetting my router, a Huawei HG655d. I get a "no connection" error when I try to send a print job to the printer. Function AirPrint doen and the printer is not visible on the iDevices. I have the latest version of my OS (OS X 10.8.3) installed, I also tried to reset and reinstall my router and my printer several times but nothing works.

    Is there a way to make printing wireless correctly?

    Access my printer directly via its IP address works, so the network connection should work. I've added details of the network below:

    Your router may not support Hello, who need your Mac to find the printer.  Enter the configuration of the router and see if there is a way to activate it.  It is sometimes called mDNS.

    Additionally, make sure that the multicast is enabled.

Maybe you are looking for

  • Why some emails do not disappear while I'm writing them?

    Several times recently, I was about to send an email when he disappeared from my screen, even if the program is still open. The last time this happened I tried the back button and a message on security and the server.Anyone had a similar experience.

  • Fatal error: mscorlib.dll

    When I open certain programs this error message. Fatal error: cannot delay load mscorlib.dll (error Win 32: 127) libraryThis program may no longer work and will end now This error message has to do with Microsoft Framework. Any ideas? Help would be w

  • 'Search' and 'Run' is missing in the startup folder

    original title: "Search" & "Run" is missing. My "Search" & "Run" are missing from my 'Startup' folder, how do I reinstall? I have Windows XP Professional.

  • Vista SP1

    Y at - it another site to download the SP1 from Microsoft?  When I click on the link from the site posted it gets nowhere.  It seems just bouncing around the Microsoft site. Steve

  • What 32-bit wic download to garmin

    I need to downlaod Wic 32 bit to update my maps on my Garmin GPS, but it redirects me to a page with a bunch of codes and I don't know which is correct. I have a Dell Windows Vista XPS 400.  Version 5.1. Any help would be greatly appreciated. Thank y