Client Windows Update not found with error 0x80072efe.

Similar Questions

• Client Windows Update not found with error 0 x 80070490

  Since December 18, 2010 windows update fails on my DellLatitudeD630 under Vista ULTIMATE SP2.
  Tried many methods suggested on various web sites:
  Installation via the Vista DVD update: result: update greyed... no upgrade needed

  Services related to Windows Update, re-registers restarted .dll files services: no change

  Cleaned the permissions using the subinacl script posted on the web: no change

  Tried to install WindowsUpdateAgent30 - x 86 .exe, Setup stops with the Agent installation program Windows Update has encountered an unrecoverable error (but I was not able to understand what goes wrong).

  Anyway, I tried what I could and would be very happy if one of you could tell me a method that works.

  Thanks in advance,

  C.

  Unfortunately, the only options are really "upgrade on the spot or reinstallation of the operating system".

  K TaurArian [MVP] 2005-2010 - Update Services

• Windows Update KB976325 fails with error WindowsUpdate_8007371C and WindowsUpdate_dt000 code; How can I correct this failure and install the update?

  I can't install KB976325 update.

  The system is Vista Ultimate (64-bit) Service Pack 2.

  Error returned is

  "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  I did the following:

  * Reset Windows Update via KB 971058
  * Check the files with the file system Checker: no problem found
  * Downloaded KB 976325 as a stand-alone file, the update failed (no error given)
  * Ran Windows Live OneCare Safety Scanner: no problems found.
  * Ran Windows Defender quick scan: no ound problems
  * Clean the registry and temporary files with Windows Defender

  There must be a solution to this problem!

  In desperation, I tried the Windows 7 upgrade.  The upgrade failed at the last step.  Vista was reinstalled and it works OK.  However, I can't yet do the KB 976325 update!  Oh, the Windows Defender definitions file has been updated through Windows Update fine.

  Walter,
  FYI-you are in the right forum.  All Windows Update components are in the same enclosure.  It is important to publish the specifications of your system, as you did.

  OK, lets start with a few basics.  This KB976325 update is an update of security for Internet Explorer 7.
  -First question is therefore always you use IE7 or have you moved to IE8?
  -If you are looking for your update history is this show as installed KB?  It is possible that it is already installed and that it is presented again for some reason any.

  Take a look at this article.  It does not appear that you have tried these steps yet. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update back constantly with error 80073712 when trying to update?

  Recently, I reset my computer, which was running Windows 8.1 at the time, which led him back to Windows 8. I tried to update in order to re - install Windows 8.1 but I get this message:

  

  After you click install now, I have this message:

  

  I tried various methods such as running the troubleshooter, running the DISM tool (which cam) upward to an error and uninstall my third-party antivirus. Is there another way I can remedy this?

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  I understand that the computer has been set back Windows 8 Windows 8.1 you did reset. This happens whenever you do Refresh or reset the Windows 8.1. If you want to keep Windows 8.1, you must use the product key for Windows 8.1.

  As far as the Windows updates are concerned, I suggest you perform refresh as you tried possible steps already to nothing does not.

  To refresh your PC

  1. Drag from the right edge of the screen, tap settings, and then tap Change PC settings.
     (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down, click settingsand then click change PC settings .)

  2. Press or click Update and recovery, and then press or click on recovery.

  3. Under Refresh your PC without affecting your files, tap or click on Get started.

  4. Follow the instructions on the screen.

  Warning: Apps that you have installed Web sites and DVD will be removed. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  Please refer to the article below: see the section refresh your PC without affecting your files

  How to refresh, reset or restore your PC

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Windows update Setup fails with error code 80070641.

  my laptop will not install updates. How can I install updates?

  I tried all the things that windows says to do but none of it works

  have now 19 important updates that it will just install, any help would be greatly appreciated!

  Thank you

  Original title: Vista-error code 80070641 641

  See if this post has resolved your problem: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/updates-not-responding-error-code-80070641/446c108b-3222-46f9-ad2c-05dd231fd071

  J W Stuart: http://www.pagestart.com

• Windows does not start with error - PXE - E53: no boot file name given

  I have a PC HP P6010in at home, but for 3 days while turning on the PC, I get the error PXE - E53: no boot not received and after that the wndows file name 7 I installed does not turn. Even the advanced startup options do not come.

  Please help solve the problem.

  Thanks in advance

  Hello

  This error comes if the operating system or any boot device is not at the start of the network, where the system tries to boot from the network or Boot Rom. seems the BIOS setting is lost. To solve the problem. Enter the BIOS by pressing F10 or F1 and reach the start (on the top with the right arrow key) tab. In the Startup tab, there should be an option related to the priority of the device, select first boot as drive boot HARD settigs, and then save by pressing F10, select Yes for confirmation.

  Now a PC will reboot and hope that the windows starts.

  Good luck

• Error: "Tuner not found" with Windows Media Center

  Original title: someone at - there a solution to this problem of Tuner not found with Windows Media Center? I tried for several years to find an answer to this embarrassing problem without success.

  I did just about everything, including a restoration of the complete system without success. It would be nice to be able to use my Windows Media Center to watch live TV and record programs I would like to see later.

  There is a great thread to
  http://h30434.www3.HP.com/T5/desktop-hardware/ViXS-pure-TV-U-48A3-TV-tuner/TD-p/52529
   
  with people have reported this problem with this tuner.
   
  Unfortunately, it looks like the only solution people have found is to replace the
  Tuner with another brand.
   
  I don't know if it's the hardware failure or something else, but looking at this
  wire, if it was ME, I cut my losses and replace the tuner.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

  RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

  Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

  I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

  http://eng.ralinktech.com.tw/support.php?s=1

  My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

  I tried to install all kinds of different ways but were not able to make it work.

  Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

  Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7
  Windows 7 discussion groups

  They may be able to help in obtaining the wifi USB adapter to work.

  8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services

• Windows Update: failed. __Code 643 windows Update encountered an unknown error. _ * AND * __I cannot repair Windows 7 with the disc either. My guess is: these issues are related...? __

  I have THREE questions which PEUVENT all be linked togther... What do you think?

  [I am slot as Windows 7 Ultimate (free upgrade to Dell PC w/purchase) on a Dell 64 bit PC XPS435]
  I've upgraded from Vista about 3 weeks ago.

  #1 - Two weeks ago I had a problem with the installation of Nero/LiquidTV-TiVo to my PC... (this is also when the problem started).
  To get the "Nero" thing figured out, I took the advice of someone on the Forum/Blog of Nero. The person has provided a lenghty explanation how to uninstall LiquidTV completely by removing the registry files... I don't really know what I'm doing in the registry, but everything that I helped my problem of Nero, but I couldn't tell you WHAT I deleted OR if I have deleted any bad subfolders or whatnot!... the next time I started my PC is when the NEW NUMBER is right.

  #2 - On my next BOOT, Windows Update has found an IMPORTANT update:

  A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB954430)

  .. .and it fails every time, it tries to install saying this:

  Windows Update - failed

  Code 643 Windows Update encountered an unknown error.

  "Get help with this error" provides little or no help... but it says this:
   "WindowsUpdate_00000643" "WindowsUpdate_dt000"
  
  All the research I did, the problem seems to be with Microsoft .NET Framework... .and all the solutions I found talking about it, "UNINSTALL all THE .NET FRAMEWORK & REINSTALL" ... I tried and there is no .NET Frameworks listed in Add/Remove, and when I press on ' VIEW INSTALLED UPDATES'... " on my PC it says, "no updates are installed on this computer"... what the _____?

  #3 - Today, I thought I would just pop the WINDOWS 7 installation disc and do a repair/upgrade... It will not be upgraded.
  He cycles most of the way through, then he Has STOPPED and says this:

  The following problems prevent upgrade Windows. Cancel the upgrade, perform each task, (it lists only a SINGLE task), and then restart the upgrade to continue.

  • Windows needs to be restarted if necessary to system files can be changed before you continue.

    Does not help restart. He tried 3 times and he ends up doing the same thing.
    Is it possible I deleted something out of the register so far here and which is cause of all this?
    If so, is it possible to fix WITHOUT doing a new install of Windows 7?
    OR... anything can be a problem... Please HELP!

    (And please note: I am a first year student college with specialization in computer science... but I just started last semester, so I don't know what I should... yet. - though, I SHOULD have known better than to mess with the registry!) My bad).

    Thanks a lot for your time in advance, and I look forward to hear from you!  VikeMike4
    

  Erwan,
  You must read this entire thread and the State, if you have tried the steps listed here or that you tried to fix the problem.  Take a look at this article, because it has a solution for 643 errors: KB971187
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update will fail with the error: error code 80072F78

  Original title: windows update failed, it says 'Error code 80072F78' even if I already ran Microsoft FixIt and fixed the problem.

  Windows update failed, it says 'Error code 80072F78' even if I already ran Microsoft FixIt and fixed the problem.

  Hello
   
  1. who is the software antivirus installed on the computer?
  2 did you have any software or changes to the material on the computer before this problem?
   
  Method 1:
   
  See the steps in the following links.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
   
  If the problem persists, see the steps from the link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997
   
  Registry warning
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
   
  Important: While performing the check disk on the hard disk, if bad sectors are found and if it attempts to repair this area, all available on which data can be lost.
   
  Hope the information is useful.

• Windows 7 slow down and MS security essential does not work with error "0xc0000185.

  My PC does not work well.

  I use Windows 7.

  When I tried to open it, it will take at least 5 minutes before turning into log in page. and after I entered my password again 5 minutes to load.

  When I connect successfully my essential security MS does not work with error "0xc0000185"... then my Explorer windows always crashing.

  After each action I did it takes time to load... also, I tried to turn on my Defender, but unable to locate... I also tried to analyse using malware bytes, but it also shut down the application...

  Help, please. I need all my files...

  Thank you.

  Hello

  Windows Defender is disabled by default when you use MSE and nothing to worry about.

  Analysis of Malware in Mode safe mode with networking.

  Download, install, update and scan your system with version free Malwarebytes AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  It is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  See you soon.

• Windows 7 SP1 will not install. Element is not found, the error not found (0 x 80070490) 490

  I'm running Windows 7 64.  I tried to use Windows Update and received this message: element not found, not found error (0 x 80070490).  Code 490 Windows Update encountered an unknown error.  I tried all of the troubleshooting, difficulty, burning the .iso (which worked great on my laptop running Win 7 32) and I tried a repair, nothing works.  Any ideas or should I just not worry about installing SP1?

  Steve

  All,

  If all the above steps give no results, the next logical step is to perform an InPlace upgrade.

  An upgrade on the spot is the final solution before you have to reinstall the operating system.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  How to perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2, follow these steps:

  1. close all running applications.

  2. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

  3. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exe in the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yes to accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer.

  Please see: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  See you soon

• Microsoft Update maintains did not give me the error code "646 windows update encountered an unknown error" __Help__Thanks in advance

  Windows Update continues to not give me an error code "0000646 Windows update encountered an unknown error.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?

  When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?

  http://support.Microsoft.com/kb/946414

  «"Error when you download updates using Windows Update or Microsoft Update: 8000FFFF"»

  Follow the information given in the above link to solve your problem.

  See you soon. Mick Murphy - Microsoft partner

• for windows update make me number error msg: 0 x 80240036 and solve this problem poblem with fixit get msg w xp sp3 rendered and nework Framework 2 or lator should be installed pls can help you

  for windows update make me number error msg: 0 x 80240036 and solve this problem poblem with fixit get msg w xp sp3 rendered and nework Framework 2 or lator should be installed pls can help you

  See your other thread the same. http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/to-make-Windows-Update-am-getting-MSG-error-number/3f579859-ecb0-408D-9db3-804044a21fb7