Clip power + can not be formatted

Similar Questions

• a movie clip button can not detect its code AS

  On my root timeline code below making reference to a movie clip button, which can not be detected when I place my mouse over it. He was given an instance name. I don't know why it works. I've done other buttons in the same way and they work. It only works when I put my code in the timeline of binary_mc, which I don't want to do what I want to keep all my centralized code.
  
  Any ideas?

  It seems to me that your BACK button doing eaxctly what you tell it to. You should try to follow logically what you ask.

  For your next button, you have a "_root." stuck in itself that is a typo and should be deleted. Your next button is also exactly what you ask him. He actually goes to the _binaryToDenaryPage of tag part two where he runs the script on chassis # 469, that is which then sends you back to the main menu.

  It would be useful to you if you could debug your slightly better FLA and try ways of his actions. For example, try to comment on all the ACEs on chassis 469 with the exception of the stop();

  You assume that your button script does not work because they do not seem to do what you ask them, but it is only appearance. If you are looking for the needle in a haystack badly.

  I also noticed that in 469, you reference several image tags that do not exist as _B2D3 and _B2D2. I tried to change those for labels, I think that you mean and now my Flash crashes whenever I try to test your movie so I gave up.

• Status: \t10.0000 MEMORY ERROR POWER + can not install printer

  Hi I have a printer HP Laserjet P1102w. I have changed my router and my laptop and now am not able to install the printer on the new laptop and router.

  I tried to install from HP Smart setup via a USB cable. When I do that, I get an error message saying that the installation failed and advising me to turn off the printer, turn it back on and try again.

  I tried to reset the printer, the default settings, and then print a test page and using the IP address to access the printer. An error message says:

  Status: SUPPLY 10,0000 ERROR MEMORY

  I tried without taking this into account and going to the HP Smart Install tab, and setting up a printer in this way. When I did, I get a similar error message before saying that the installation failed and advise me to turn the printer off, turn it back on and try again.

  Could someone advise me please on what to do? Should I spent trying to get the installed printer, and then try to correct the error memory power or correct the error memory power and then try to install the printer? I am a little hate to buy a new toner cartridge, if after doing this, the printer may not always settle.

  Thanks in advance,

  Paul

  Very good information.  Since this printer is having such a bad plug try to reset the printer first.  I have provided a link on how to restore the default printer. I had a similar with this printer problem, until I installed a very recent firmware update.  This is how I was finally able to do so, install and connect:

  1. Clicking on the tab drivers and software at www.hp.com/support and typed in my name of the printer (P1102w Laserjet) and press the Enter key.  Then, I chose my operating system (you will need to know if the type of your computer system is 32-bit or 64-bit or I would provide a link).
  2. As part of the installation of the Driver and product, I installed the drivers and software HP Laserjet full feature and proceeded to the installation using the USB key to the wireless configuration.
  3. After the test page printed, the printer disconnected from the network, so with the USB cord still attached, I went to the same download page and install the latest firmware update: Version 20130213, which went very well, I might add.
  4. Then, I went on the Start button and select all programs > HP > series HP Laserjet Professional P1100 > Configuration Wireless and finished get my printer connected to my network.

  I strongly suggest the update of the firmware.  I hope that this information helps out you.  Try the above steps and if this does not work please let me know.  I look at the error message once you're able to get installed it.  Maybe when you restore the default printer you can restart the computer if you are running low on available memory, where the error message.

• InDesign CS6: Letter 'I' initials not canned not their formatting?

  Hi all

  Hoping to get your help with something. I am currently working on getting a book highly customized format ebook page layout. Things are going well, except that I use the initials, and when a paragraph starts with the letter 'I', the dropcap is does not maintain its depth of 3 lines, as for all the rest. It also reduces the space between this and the following letter (if any). I solved the issue of the missing space by inserting white space, without breaking, but the depth of the line 3 is the part I'm having a problem with still. Any suggestions?

  Screencaps for reference:

  PRINT FORMAT (doesn't bother me down... work on the retina and CS6 has no support):

  

  EBOOK:

  

  Hi Alex,

  You specified dropcap in the style definition of paragraph or applied as a substitution? Initials are not supported as replacements, and that is perhaps the reason that the initials do not work for you.

  Kind regards

  POOJA

• Sprocket: My gear don't power down and can not pair on my mobile device. How to solve this problem?

  Hey everybody,

  My pinion don't power down and can not pair on my mobile device.  How to solve this problem?

  Thank you

  Bill

  Hi Bill,

  This should solve your problem!

  1. Locate the reset button near the port of loading.

  

  2. Insert gently a needle into the reset button access point and press the reset for 3 seconds button.  Resetting the printer and everything already illuminated turn off the LED.

  3. turn on the printer by pressing the power button until the white LED lights

• HP J3Z8PA #AB5: Hello. HP J3Z8PA #AB5 shows power on password. I can not connect.

  Hello. HP J3Z8PA #AB5 shows power on password. I can not connect.

  @ohzed-osigwe

  The password screen, press enter 3 times and you will receive a 'code to stop' - enter this code on the site below.

  https://BIOS-PW.org/

  Kind regards

  DP - K

• can not power my iPhone

  Hello

  I can not power my iPhone

  xiyizhou wrote:

  Hello

  I can not power my iPhone

  Why not?

• Try to run the update to Windows XP. Had a complete crash of the PC and XP complete recharge after format. Could not downlaod updates XP then reloaded without format. Still can not download updates.

  Sorry about the title full, never used this site before

  Complete computer "meltdown" MB had failed. put spare MB in and loaded win XP - PRO after format. Could not downlad win updates.  Depc 0x8024400A error.

  Reload XP - Pro without format hoping to fix the problem.  No luck.

  Need help badly.

  I use AVG2012 for safety

  I am able to download the programs from other sources.

  I can't download the "Fixit" program as it equires SP3 and I'm to SP2.

  I tried the manual method and Thatcher did not.  I'll try the "aggressive" mode tomorrow (7/5) and if that doesn't work I'll

  seriously considered returning on Win2K.

  and then again loaded WinXP SP2 and I can not even do Windows updates.

  First, install the drivers necessary for the computer after reinstalling XP SP2. Then install the SP3 package after you a stand-alone download of SP3 Installer from this link:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Once SP3 is installed, try Windows Update. If it still does not work, or if the SP3 installation fails, you should get some messages or error codes. Post back with the error code.

• Can not download Power DVD software my Dell download Site

  Changed my hard drive to an SSD in my Dell XPS 15 (ADMIN NOTE: maintain the label removed by privacy policy >) and installed Windows 8.1 (origin came with Win 7).  I like to watch movies as before the change but can not download PowerDVD from Web Dell Dell My download site. Smart Source Media Manager Application uploads but gives me an error (see below). How do I fix this error, so I can reinstall Power DVD for my system?

  SUMMARY OF THE ERROR
  Here is a summary of the errors, the coordinates of these errors are later in the newspaper.
  * Activation of C:\Users\Vinnie\Downloads\SmartSource.MediaManager (1) .application led to the exception. The following failure messages were detected:
  + Deployment and application do not have matching security zones.

  I had problem similar download the smartsource.mediamanager, I was using FireFox to download.

  I had to change the brouser to use Internet Explorer, and download it now.

  I hope this helps.

  User of Dell.

• Can not put date format as "yyyy-MM-dd" for Chinses (PRC) and English (United States) at the same time. Win 7 PRO

  Step 1. I choose Chinese (PRC) in the list format (region and language) and set the format of 'YYYY-MM-dd' date, apply. It is ok.

  Step 2. I choose English (United States) in the list format (region and language) and set the format of 'YYYY-MM-dd' date, apply. It is ok.

  Step 3. I chose the back to Chinese (PRC) in the format list (region and language), format date is reset to "YYYY/M/d", it is not ok for me.

  How can I set the format of a two language. ?

  Because I use the siemens industry software, when to change language it will read the date format different from the language that is displayed. My client want to see the same format.

  I tested under Win XP, it may set the format even in different languages

  Hi Jerry,

  Thanks for posting the request in Microsoft Community Forums.

  It is normal that you can not set the same date format for both languages at the same time. You will need to use the drop-down list to choose a date format customized if necessary.

  Hope this information helps.

• Smartphones blackBerry Media card can not be read or format

  I pasted in my SanDisk 4 gig card in my "BOLD" and I got a message saying media card has been inserted. When I go into options - memory, it displays a message that says:

  "media card can not be read. Check that the memory card is formatted. »

  I then try to format the card, but I get a message that reads: Media Card Format failed.

  I can read the card on my PC, but the "BOLD" just will not do anything with it except tell me when I put in or he pulled.

  Someone knows how to fix this?

  Thank you

  OMG! After spending hours reading stuff, I finally got to work.

  All I had to do was turn the phone off and remove the battery then put it back in.

  I could just kick myself!

• I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?

  I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?

  Just installed windows 7 but I can't read my product key?

  Help me please thx!

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  Brand

  Online order

  Phone

  Acer

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  1-866-539-3901

  ASUS

  http://eStore.ASUS.com/shop

  1-888-678-3688 or

  1-510-739-3777

  Reference Dell

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&l=en&s=Gen

  1-800-624-9896

  eMachines

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=eMachines

  1-866-539-3901

  Entry door

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=gateway 1-866-539-3901

  HP/Compaq

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00810334&LC=en&DLC=en&cc=us&OS=4063&product=4057208

  1-800-474-6836

  Lenovo/IBM

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-4M7HWZ.html

  1-800-426-7378

  Sony

  https://servicesales.sel.Sony.com/Ecom/accessories/Web/welcome.jsp

  1-800-488-7669

  Toshiba

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  1-800-457-7777

• Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

  Windows displays the device works correctly.  However, the device does not appear in windows Explorer. also, I can not format disks.

  What should I do next

  Hello

  1. Are you referring to the NEC USB Floppy Driver?
  2. You try to format floppy disks?
  3. Was - this earlier work, if so, did the chnages on the computer before this problem?

  If it worked, I suggest the following methods and check the status of the issue.

  Method 1:

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I am installing a seagate 500 GB internal hard drive, when I go to disk management, the drive is there, but I can not format because you know not initialized. can anyone help please

  I am installing an internal hard drive 500 GB seagate on my computer, when I go to disk management, the drive is there, but I can not format because it is unknown / not initialized. can anyone help please

  Try one of the two utilities below to partition and format the drive.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, restore Partition after an accidental deletion, convert partition, Explore, Hide partition partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To achieve any task using the "Operations pending" box at the bottom or top left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASEUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/personal.htm
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• This virtual machine to become protected vsphere HA and HA can not try to restart after a power failure

  I got a 5.1 cluster with some problems HA.

  a few virtual machines are showing this

  This virtual machine to become protected vsphere HA and HA can not try to restart after a power failure.

  When I try to reconfigure HA on the host. It times out and fails.

  any idea?

  Instead of reconfiguring HA on the concerned host, have you tried to disable HA on the cluster and enable again? See: VMware KB: State of the virtual machine changes from protected to Unprotected