BB10 Alpha device not for Linux

Hi guys! I got a camera of Alpha BB10 of the Jam. Barcelona

I use Kubuntu Linux x86_64.

When I connect Alpha device using the USB port, a device screen tell me about the installation of drivers, but only for Windows or Mac. Kubuntu detect device as an audio CD, but cannot climb.

This means that I can't use Alpha device under Linux, only for Windows or Mac?

Best regards.

I found that its really the USB auto detect which merges in Linux.

For detection of basic working properly, I just go into the config 'Storage & sharing' menu and change the option "USB connection" to "Auto detect" to "connect to Windows.  Now, every time I plug the device you in a Linux machine picks it up very well.

FYI, the USB connection is basically IP - on USB.  This is not different from WiFi, except to work a bit more smoothly.

When you enable the 'development' Mode, your computer will probably be re - detect the device to a different (and essentially constant) IP:

PS I do all my development on Linux work, when possible.  (there are a few preview QML bugs that occur mainly on Linux, which could lead me to go to a Windows box instead of temporarily screwing with my video drivers, but it's really just a question when DIY/prototyping UI bits)

Tags: BlackBerry Developers

Similar Questions

  • BB10 alpha device connected to Linux but poster in IDE "not connected"


    I use Ubuntu 12.04 and bbnk 10.0.6 for development. My alpha camera can connect to Linux and I can download the configuration previously debugging token created on another Windows XP PC to the device. I also import my key sign created previously on Windows to the current Linux environment. But now the 'not connected' USB to IDE BB10 poster display and cannot deploy any application on the device. What is the reason? He cannot mix the sign key and debug token created on a different platform like Linux vs Windows? Help, please. Thank you.

    Kind regards


    It works very well.  A few tips to remember:

    -Set :-> Parameters of storage and access-> USB connections (connect to Windows)

    (Automatic detection does not work with Linux)

    -Make sure development Mode is set to 'works '.

    S ' sure "ifconfig usb0" returns something, preferably

    S ' ensure that you can test the DA dev mode IP: (this is the default)

    If all the above works, then you should be able to use it with the IDE.  If the IDE thinks that it is not connected, ignore the error and try anyway.

  • Skype for Linux Alpha starts do not

    I installed Skype for Linux Alpha on Ubuntu 15.10. But it does not start. I also have Skype 4.3 for Ubuntu. I tried to reinstall the alpha version, but it does not start.

    [Edited by moderator to add the label "LinuxAlpha"]

    After the last update it works... Thank you

  • HP envy 17-computer laptop j013cl: my PC startup for linux but not for windows in any bootable devices

    Hey guys
    I really need your help
    A few days ago that my hp envy notbook PC obtained in automatic disc repair loop that I could not pass or get on with it. I use linux mint rosa for the backup of my files and format my partitions and when I tried to reinstall windows with DVD or peripheral USB bootable while linux been cleaned for my PC it say:
    bootable devices found
    No operating system found in this computer please install

    And I couldn't understand what the problem is
    I thought it was hard, but it works fine when I use live linux OS
    And if it was a BIOS problem should not have linux operating system. Help, please!

    Here is the help. It is a bad hard drive and must be replaced. You seem to know what you're doing, so I will not bore you with details, but more help is available for the asking.

  • BB10 dev unit alpha has not started


    BB10 dev unit alpha is not started. When I plug the unit with the charger it show only red lights are flashing. same thing happen since the last day. I plug the charger since yesterday afternoon, but the device is not started.

    My device is not started after one and a half day. Now, it started after the reinstallation of the OS and the upgrde to 10.0.6

  • Why not update for Linux mechanism works?

    Firefox informed me this morning that an update was available. In the small window in which this information came, there was a button marked "Update Now". I pressed the button and showed a gray horizontal bar with a short dark color bar moving from left to right. The text in the window says that Firefox has been updated. Unfortunately, that "update" can go on forever with nothing to show for it. So finally, I have to close the window myself (using the window manager).

    So my question is: why the update mechanism does not work for Linux?

    You have write rights to the Firefox installation folder?

    You are using a Firefox installation from the repositories of your Linux distribution or you installed Firefox yourself?

    If you used the deposits then you need to update via your software management.

    Otherwise, you may need to be updated as long as user root.

  • M30X-124: can not find the drivers for linux and windows 2000

    I want to know how I can linux Redhat 9.0 on my computer. Wenn, do check the hardware, the screen goes black.
    And I want to install windows 2000, windows 2003 or later. But the important point is that I can´t find all the drivers on the site.
    Thank you

    [Edited by: admin 7 May 05 08:36]


    Sorry, Toshiba provides only the drivers and tools for the OS liveries (M30X: WinXP). But you can search with google for drivers of W2k adapted. I think you will find them!

    Win2003 drivers can be a problem because it is a server operating system and there is not so much drivers for laptop available!

    For Linux, I found 3 interesting sites for you!

    Tanya Bye

  • load the Panel tui does not not on CVI2012 for Linux

    We have problems with the panels that look great on Windows being difficult to read on Linux, probably because most of the fonts text and control are VAL_DIALOG_META_FONT under Windows but the CVI for Linux implementation has only NISYSTEM.

    As a quick way to test different fonts in Linux I created a file of tui in the file of the uir and then used the global search and replace to change VAL_DIALOG_META_FONT to something that would look like if all goes well decent on Linux.

    Problem is that works LoadPanel(0,"",1) under WIndows but get error-46 on Linux.

    Considering that LoadPanel, 0, "(filename.uir,PANEL) works very well under Linux & Windows but the fonts are very difficult to read on Linux."

    Is there a mapping table somewhere magic numbers attribute VAL_FONT corresponding fonts under Windows and Linux?

    It would be nice to have some guidance on default font mappings. But at the end of the day, I don't really care much fonts unless the default values are difficult to read.

    I guess another complication possible is that the native file UIR CVI 8.5, but CVI 2010 for Windows did not need to "convert".  Perhaps one of the attributes in the file of tui is not valid on Linux, but it is on Windows?

    Loading files TUI in Linux, it's a question we've discovered recently and he did not again to the list of known issues. I'm not 100% sure, but I think a solution to this problem would be to manually edit this file of tui and remove these attributes which generates errors. You can start with ATTR_TITLEBAR_STYLE and then look if one of the following are in the file of tui: ATTR_DS_BIND_PLOT_STYLE, ATTR_DS_BIND_POINT_STYLE, ATTR_DS_BIND_LINE_STYLE, ATTR_DS_BIND_PLOT_COLOR and delete them. Then try again to load the file of tui.

    On the other hand, I think that there is a solution to your original problem: predefined fonts (VAL_DIALOG_METAFONT) seems a bit about Linux. In my view, there is a way, that a user can change the underlying font and the size of a predefined font. Under windows you can change it in the registry but under Linux, you can set an environment variable: XAPPLRESDIR that points to a directory that should contain a file named cvi, a file where you can write the font settings. Each line must be in the following format: .:. If you want settings you write persistent applications put it a "*"instead of the name of the application. "

    The list of possible keys is: appFont (NIAppMetaFont), (NIMenuMetaFont) menuFont, dialogFont (NIDialogMetaFont), editorFont (NIEditorMetaFont), messageBoxFont (NIMessageBoxMetaFont).

    The value must be of the following form: --

    This is the only line that I have in the cvi file: *.dialogFont: adobe-helvetica-19

  • How do I update driver for printer Epson Stylus C43 Color inkjet (USB device not recognized)

    I run Windows XP Home Edition and have a printer Epson Stylus C43UX Color.  Quite often, the printer connects, is recognized by my laptop and works very well, but sometimes, when I connect and turn on the printer, I get a ball on the toolbar "USB device not recognized" State the Device Manager shows the printer as an unknown device and in the State of the device properties is no indication 'no driver installed for this device.  I uninstalled drivers and enforcement "Looking for new hardware" menu Action of the Device Manager has received the balloon message "new hardware found: your hardware is installed and ready to use. Try to then print the results in a "Communication error" message and the printer fails to print.


    You did changes to the computer before the show?

    Method 1:
    Try the steps in the link and check.
    Advanced troubleshooting tips for General USB for Windows XP problems

    Method 2:
    You can update the drivers on the manufacturer's Web site and check.
    See the link to update the driver:
    How to manage devices in Windows XP
    Manufacturer link:

    Method 3:
    Try the steps from the link and check if you are able to print.
    Printer in Windows problems

  • I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

    I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)


    I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

    It will be useful.

  • I get device not found DPW on win XP for sony ericsson usb drivers

    I try to use my phone sonyericsson on my win xp pc and I get device not found MTP error message, even though I have mini usb as well as drrivers in my memory supplied with mobile phone card.


    1. What is the model number for the phone?
    2. were you able to connect the phone to the computer with no problems before?

    Step 1: Try to run the fix it tool to the article below and check.
    Hardware devices do not work or are not detected in Windows

    Step 2: Check if the problem persists in the clean boot state.

    See also:
    Advanced troubleshooting tips for General USB for Windows XP problems

  • Windows don't con not load drivers for 6 to 4 adaptorCode 31__Tun mimiport con adaptor\device not stsrt Code 10

    CDRom does not work and the DVD player does not work. Have you checked the two drivers are up-to-date.


    For the 6to4 card number, which is separate from the issue of the CD/DVD.

    Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

    Nothing else to do, Windows will do the rest. And you can ignore errors if you wish and on some
    computers, it will always be there but no problem to be expected.

    On a Windows Vista-based computer or on a computer, Windows Server 2008, the card Microsoft ISATAP
    appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message


    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
    solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

    When you insert a CD or a DVD, Windows Vista may not recognize the disc

    Your CD or DVD drive cannot read or write media - A Mr Fixit

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    Drive CD - R or CD - RW Drive is not recognized as a recordable device

    Hardware devices not detected or not working - A Mr Fixit

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.


    If necessary:

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
    that the troubleshooter does not, and those who "could" be the cause.

    Check with your system manufacturer Maker and device for possible firmware updates and the good
    Your player registry entries.

    Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
    other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.


    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}


    You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
    a person with the same model.

    Forums - a lot of expert real help

    CD/DVD units

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • device driver will be installed not for - realtek rtl8192e wireless lan 802.11n pci - e nic__

    device driver will be installed not for - realtek rtl8192e wireless lan 802.11n pci - e nic
    in troubleshooting, he said I must be connected to the internet, which I am connected via my LAN with yellow cord. If anyone knows how to solve this problem, it would be much appreciated. Ive called microsoft and they were lying to call back me within the hour and im still waiting for them :(

    Direct link to the site Reltek with drivers below:
    Driver Realtek RTL8192E for Windows7 here

    Always the best choice is to use the drivers from your motherboard, desktop or mobile site.
    Second place should be device site producer.
    Last chance is updated for Windows.

    If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

    If your issue is resolved, please indicate then your wire is with solution.

  • Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

    Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

    Click Start > devices and printers > add a device, make sure that Bluetooth is turned on. For additional help, see the following link: Andre Da Costa

  • External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management.

    External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management. But when I checked in system information, it is also displayed device but sectors and the tracs where showing the value 0.

    Hello Sharan,

    These links may help:

Maybe you are looking for