Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

Similar Questions

• BlackBerry Smartphones ALT/O command to display the messages does not work on 7.10; Anyone know another shortcut?

  ALT/O command to display the messages does not work on 7.10; Anyone know another shortcut?  I know that I can get all messages sent via Options, but too heavy to do it and then cancel it.

  do an advanced search using the options. Once you are satisfied with it, you can save it and assign it to Alt - O.
  If you do this, remember to remove any other shortcut search which may exist.

• I have some clips where does not show the audio waveform and others where the thumbnail to display the video does not show. THE possibilities of sight are checked in the Tools menu.

  I have some clips where does not show the audio waveform and others where the thumbnail to display the video does not show. THE possibilities of sight are checked in the Tools menu. I'm on a Mac Pro 2013. Latest version at all.

  Looks like without the audio element is a nested element.  You will need to restore the audio signal in order to see the wave forms.

  I have the same problem (sometimes):

  https://forums.Adobe.com/message/8527998#8527998

  Without rhyme or reason, as far as I can tell.

• The NEC uf000x diskette device is showing to work correctly. However, it does not show in windows Explorer. I can't read any disks or even format.

  The NEC uf000x diskette device is showing to work correctly. However, it does not show in windows Explorer. I can't read any disks or even

  format. What is my next step

  Check Device Manager to see if it appears.  You may need to install a driver for it.  If so, you should be able to get from the NEC web site.

  Good luck.

• App, opening a file via windows shell commands: "a device attached to the system does not work.

  Hello!

  I hope that someone here will be able to throw some lights on my question, if I post this is the wrong place please let me know because I was directed here (which forum? ). OK, I support and develop custom applications. An older application especially written in Delphi allows users to attached documents (pdf, jpg, txt, etc.) to the records of equipment in a data base. Later users can view these records of equipment and press a button to display the document.

  When the user presses the button to view the document, the application uses the folder variable to save the document to the temporary path and then asks windows via a shell command to open the file. The appeal of Delphi for windows used is the following:

  ShellExecute (GetDesktopWindow, 'open', PChar (TempFile), ",", SW_SHOWNORMAL);

  Normally this process works very well, we have had no problems so far. On a single computer (windows xp pro with Service Pack 3) belonging to a client, instead of opening the file, windows returns the system 31 error and the message ""a device attached to the system is not functioning. ". is displayed.

  * If I navigate to the location where the file is stored on the disk and try to open it, software adobe reader opens the file correctly.

  * I found some suggestions that the file extension is associated properly. PDF associated with Notepad, I changed, and the application could ask windows to open the file very well. Open the file from the location on the work of disc as well. Change the file for adobe and the problem persisted.

  * I reinstalled adobe reader software, but also a previous version of adobe and the problem persisted.

  * The application doesn't have any problem asking other files opened, only those associated with adobe reader on this same machine. The problem does not exist on other machines.

  That about sums up the problem. Any suggestion would be appreciated.

  Thank you

  Louis

  It was determined that the version of adobe reader was at fault.

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error: This device does not work properly because Windows cannot load the...

  I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

  Hi JasonBedgood,

  1. Once you get the error message?
  2. did you of recent changes on the computer?

  This error occurs if the required driver is not installed or the driver is damaged.

  I suggest that you update the driver for the device and check.

  How can I update the driver for network card on the computer

  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on network adapters to expand.
  4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
  5. click on Update driver software.
  6. follow the Wizard update software driver to update the driver for NICs .

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Today after the update of cloud five programs, all work correctly, however, Lightroom opens, but only develops, gives a message: Please reactivate your membership to enable the module.

  Today after the update of cloud five programs, all work correctly, however, Lightroom opens, but only develops, gives a message: Please reactivate your membership to enable the module.

  What and how do I do to solve this problem? Thanks in advance!

  Hello Julian

  If you still encounter this problem, please try the following troubleshooting steps.

  Solution 1: Sign out of Lightroom 5.5 and then connect back with your Adobe ID

  Solution 2:

  Set the permission to the folder SLStore & SLCache:

  NOTE: Do this twice, once each for the SLCache and SLStore files.

  Mac:

  • Use the Finder to navigate to/Library/Application Support / Adobe / SLStore or/Library/Application Support / Adobe / SLStore.
  • Control-click on the folder and choose read information.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Set permissions:

  System: read/write

  Admin: read/write

  Everyone: read/write

  • Click the gear icon and select apply to closed. Close the dialog box for information.

  Win 7 / 8 to win:

  SLStore: ProgramData\Adobe\SLStore
  SLCache:

  Win 32 bit: program files Files\Adobe\SLCache\

  Win 64 bit: Program Files (x 86) \Common Files\Adobe\SLCache\

  • In the file Explorer, right click on the SLCache or SLStore folder, and then select Properties.
  • Click the Security tab and set the permissions:

  Administrators: Full control

  Power users: all except extraordinary and a total control

  System: Full control

  Users: Read and extraordinary

  • Click on advanced and, if requested, accept the (UAC) user account control elevation prompt.
  • Click on the owner tab, select administrators and click on modify.
  • Select Replace owner of subcontainers and objects. Click on apply and then click OK.
  • Click the permissions tab, and then click on change permissions.
  • Select Replace all permissions of child object with permissions inheritable of this object. Click OK, click Yes.
  • Click OK, and then click OK in the Windows Security dialog box. Click OK to close the advanced security settings dialog box.

  Suggestion 2: Rename the SLCache folder and relaunch Lightroom 5.5

  We have followed this issue of Lightroom. Please let me know what solution has solved your problem.

  If these solutions do not solve the problem for you, let know us.

  Thank you

  Scott

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• \\HOME-server is not accessible. A device attached to the system does not work.

  I use Windows 7 Professional. My network server is WHS V1.

  I have a shortcut on the desktop to \\HOME-SERVER on my W7 machine.
  All of a sudden it has stopped working.
  I get the message
  \\HOME-server is not accessible. You might not...
  A device attached to the system does not work.
  
  
  I searched in the WHS forums, a post suggested http://www.howtonetworking.com/Troubleshooting/notaccessibale0.htm
  I found that the command line net view \\HOME-SEVER gives (and by typing this in an address bar of the Explorer does not work)
  31 system error has occurred.
  A device attached to the system does not work.

  And this net view \\HOME-SERVER\Music gives (but in typing this in a browser address bar works!)
  53 system error has occurred.
  The network path was not found.
  However, net view 192.168.1.99 (my server address) correctly list the share on the server names (and entering \\192.168.1.99 in Explorer address bar works).
  I did a system restore until the problem occurred first to rule out any changes to the system.
  The problem occurred again.
  This means that my Sync Center shows none of my synchronization partnerships.
  Can anyone suggest the setting or service that must be corrected to solve system error 31 problem?
  TIA
  Hello
   
  The question you have posted is related to Windows home server and would be better suited in the Windows Home Server Forum.
  Please visit the below mentioned link to find a community that will provide the support that you have requested.
  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/
   
   
  Thank you

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• Windows 7 Ultimate lights up and the screen does not display on my screen

  The title says it all.

  Hi Brandon,.

  Thanks for posting your query in Microsoft Community.

  It is regrettable that the PC does not turn on and I'll be happy to answer your query. Let me ask you a few questions to help you accordingly.

  • What is the brand and model of the computer?
  • Remember to no particular change in the computer before the show?
  • When was the last time you were able to use the PC?
  • Do you have Windows 7 repair disc?
  • Do you have connected an external device to the computer (except keyboard and mouse)?
  • When you try to start, you are able to display the logo of the manufacturer?
  • You are able to start the computer in safe mode?

  There could be several reasons according to the questionnaire above for this issue, including hardware as well. Hardware and software configurations can vary considerably, there are several ways that you can take to solve problems that might prevent Windows to start (boot) correctly.

  I ask you to follow the steps described in the article below:

  What to do if Windows does not start correctly (information valid for Windows 7)

  Notes: Please, don't try installing and reinstalling Windows section from now.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.