Clip Signal does nothing and goes across the luma?

Similar Questions

• IPod touch reads "ipod disabled" on the screen and does nothing and will not be a link with itunes.

  IPod touch

  IPod touch reads "ipod disabled" on the screen and don't respond to nothing and used to link with itunes, we think that our daughter has forgotten his password and entered the wrong one until this message has appeared, is there any solution for this?

  Hello Jesushq33

  The forum in that you send is for Microsoft Windows. For support with Apple and Apple products please click on the link below. Thank you.
  http://www.Apple.com/support/iPodTouch/

• HP Officejet Pro 8600 Plus: software the Printer Wizard does nothing and eats CPU

  Hello

  I currently have a problem with the HP printer Assistant software. I use a HP Officejet Pro 8600. Well I uninstalled and reinstalled several times, redownloaded the latest version of the software from the HP site, tried with a wireless connection and a USB connection, but still have this same problem.

  The problem is when I open the printer to the printer Assistant software (scan, definition of printing preferences, etc.) nothing loads and what I noticed is that in the Task Manager, the program is constantly, nonstop to duplicate in the Task Manager and eventually slow down the computer because of the high use of the processor of these duplicates. I can't stop these processes in time compared to the amount of tasks in doubles at this very moment, and the only way to stop it is to restart the computer. I had this problem with Windows 8.1 and so I've upgraded to Windows 10 but exactly the same problem occurs. If I wait long if I get an error (0xc0000142) telling me that I can not load the Printer Wizard, but the process will still duplicate.

  I tried using the printer with other computers, but they do not have a problem by launching the wizard from the printer. I wonder what is happening and why is the Printer Wizard launch multiple neverending himself as tasks on the Task Manager?

  Add to that, printing works fine, it is train to launch the Printing Assistant software that is causing the problem.

  Hello @jellyjr,

• iPod touch generation 5 does nothing when connected to the computer

  Hello

  I had problems with my iPod touch Gen 5 running on iOS 9.2 is not connected to my computer. Boredom? I plug it into a wall adapter and it costs. I plug it into the computer and it does nothing. I tried all USB drives (who all work, as my computer is fairly new, I got it late may last year (2015), and I tested it with my mouse wireless.)

  I tried to restart my PC and my iPod. My computer is a Toshiba Satellite C50D, which is almost a year old and running on Windows 8 (I'm never upgrade to windows 10 no matter how my computer wants me to.)

  In addition, if you could contact me general Grievous, it would be nice. I just want to say that I love him<>

  Can simply not load you through the computer or iTunes will not recognize it?

  iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  

• HDR5010KB-digital recorder - signal does not always come through the use of HDMI

  Hello

  I bought the product above in October. Since then, I have had intermittent problems. When switching on the channel AV on my TV (a Panasonic TX-P42S20B) signal is not always crossed when you use the HDMI channel (I also connected via a SCART, and who works so always seems to be a problem HDMI.) It is particularly obvious when the recorder has been used for a while (be it for recording or playback.) It is not overheating (or if this is the case, not to the degree I get a warning message) and turn off the power to the electric network seems to correct the problem, but it's a pain.

  I tried to change the hdmi cable, as well as to try different channels AV on my TV and it did not help. Is this a common problem or make me a defective unit?

  Any suggestion would be appreciated

  Have you noticed the same problem using other devices connected to your TV (using the same cable)?

• A signal ramp monitoring and verification of the range thresholds

  I have a signal that ramps at 0.05 volts/second.  During this State, it is possible that the speed of ascent

  exceeds the operation 0.05 v/s (runaway condition).  Anyone has any ideas on how to follow it and

  meet the condition of runaway?

  Are you using the production of point-by-point samples or generate the samples in table form. Solution whole Tim is the most simple and works well.

• Updates do not install, Sections of Vista does not and cannot start the Audio Service

  I try to install the updates on windows update but important as the service package 2 do not work, they start then stop and say failed code "WindowsUpdate_80070643"

  boxes keep popping up saying some files are damaged or not installed properly and that I should reinstall as a file call... system32\AVRT.dll. Windows Media is not no longer works.

  My Audio service is not running, I'm not sure that there is a problem in microsoft windows but the button to switch on the audio does not, and a box pops up saying it does not yet have another pop up says that everything works.

  any help? Please

  Hello
   
  a. updates have you tried to install?
  (b) button to switch on the audio of your computer are you using?
  c. what exactly happens when you try to run any audio/video file?

  You can try the steps outlined in the article below and check if this help.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  For audio problem you are trying to run the troubleshooter which may help. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  1. open the troubleshooting of Audio playback by clicking the Start button, then Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on the audio playback problems. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  You can also try to update check you and sound card driver if it works. The article below will help you do.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, check if the following services are set to automatic.
  a. Windows Audio
  b. Windows Audio Endpoint Builder

  Here's how:
  1. click the Start button, type services.msc and press ENTER.
  2. go to any services mentioned above at the same time, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type. Also click the Start button, if it is not started.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  After return to that exact error messages we can help you better.

  Let us know if it works.

  Kind regards
  Umesh P - Microsoft Support

• Windows vista does not open and goes to the other user that does not exist

  I try to open to all modes goes directly to any other user who has never been assigned a password. Now Icant open workstation to all the .whassup

  Hello

  1. don't you make changes on the computer until the problem started?
  2. how many accounts do you have on the computer?
  3 have you tried to start the computer in Safe Mode?

  If you are unable to start the computer in safe mode, and then try to run a system restore from the System Recovery Options menu.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I lost the toolbar and can't get it back. Alt key does nothing, and I can't find the band at tabs.

  I lost the toolbar. I do not have the Firefox button. I went to help and tried the ALT, no response. I don't think I have a strip of tab click on right-click. I tried to reload the program, still no Firefox button. I want the tool back bar and the bookmarks toolbar. Help!

  You are welcome

• LR does not start at all in winning 10.  Once I upgraded, it stopped working.   Just, he sits and does nothing and I have to launch the Task Manager to end the process

  Is there a way to upgrade...  I use a direct copy and not cc.

  I have seen that it is a universal problem with lr on Win 10.  What can I do?

  Hey benr,

  You need to install/repair Microsoft Visual C++ 2012 updated 4: Download Visual C++ Redistributable for Visual Studio 2012 updated 4 of the official Microsoft Download Center

  In addition, upgrade to version 6.5: keeping up-to-date for Lightroom

  Kind regards

  Claes

• I've updated Muse CC 2014, but when I run the program makes shows a window saying there is a new version and an option to install now or later. When I click on install now, it does nothing and the old version of Muse is always apparent

  The Muse CC 2014 update does not work. He says his place check date - Green, but when I run Muse is the old version. Can you please help.

  Don't worry - I see now that there is a separate version installed. Thank you

• Right button on the touchpad does not and cannot change the setting of what happens when the laptop is closed

  I own a HP Pavilion, under Windows Vista Home Premium, with 2-way ALPS Touchpad, I updated the touchpad driver and tried to change the options of the right button but nothing has helped.    Also, how can I change the settings for when I close my lap top

  Try the right key when it is started in safe mode or with a clean bootor maybe when logged in as a different user.

  Change the cover closing the settings by going to control panel-> Power Options-> choose closing the cover.

• esxcfg-nas - d does nothing when lance in the cron script

  Hi all

  Here's my test code (/ tmp/test.sh):

  unit of fusion-mu/vmfs/volumes/admin_nfs & gt; & gt; /tmp/Watcher.log

  esxcfg-Sin - d admin_nfs & gt; & gt; /tmp/Watcher.log

  esxcfg-vmknic - d "IP storage" & gt; & gt; /tmp/Watcher.log

  esxcfg-vswitch - D vSwitch0 "IP Storage" & gt; & gt; /tmp/Watcher.log

  RM-f /etc/cron.d/test.job

  This is going from cron, then the script removes the cron job, it's the output of the cron log (to show that it works!)

  August 25 at 08:35:01 xxx crond [10870]: (root) CMD (/ tmp/test.sh)

  Output of the log created by my test script file:

  # cat watcher.log

  #

  The output of watcher.log is always empty (but it is created when the script is run). My NFS connection remains and so does the news of IP storage.

  If I run the script manually, I get this result:

  #./test.sh

  # cat watcher.log

  NAS admin_nfs deleted volume.

  #

  Why it does not cron?  (I added to cron as root)

  Bit confused... help me!

  have tried to use the absolute as path "/ usr/sbin/esxcfg-nas" in your cron?

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• A song stops and goes to the next song in iTunes.

  My favorite song of Foo Fighters stopped playing 4 seconds and then move to the next song.  It does on my iPhone and iTunes online.  However, it will play through on my Groove music completely in Windows 10.  Help!  I need this problem soon... I can't do a flight of 5 hours without him!  Thank you!

  Whenever this happened to me, it's because a synchronization failed to halfway through or I disconnected while downloading an album. Usually the withdrawal of the album and add new solves the problem

• Repair disk Vista not working does not and cannot correct the disk error

  Hello. I have a disc error and my vista repair disc does not work and I do not know why.

  I tried "repair disk" in the start menu F12 and it will not work.

  Does anyone know an alternative solution for fixing windows disk repair?

  Anyone know why they would stop work?

  I too, have a mysterious GLOW RED on my screen and do not know if this is related to repair disk does not?

  It is originally the screen system 'black '.  My main screen simply vanishes in the dark and I have to restart the computer and go through everything new; checked the Direct X (up to date) and running hard drive Diagnostics, but the diagnosis breaks down due to the error of hard disk (disk repair-related?)  What is the 'RED' light on my screen?

  Thank you!!! for any input or advice!

  
  

  Hi Nansye,

  Until solve us the problem we need more information about the problem you are experiencing.

  • What is the exact error message you receive on repair disk?
  • Since when are you facing this problem?
  • You did changes to the computer before this problem started?
  • Are you able to boot to the desktop?
  • You have a Windows Vista installation DVD?

  In the monitor that you receive the red glow due to various reasons like failure to display drivers, hardware problem or if there is any what interference of electronic gadgets.

  I suggest you update to download display drivers the latest drivers on computer manufacturers site and check if it helps to solve the problem of the red light on the screen.

  You can access the link below and follow the steps to update the drivers to display on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Make sure that you do not have other electronic items kept around the screen and try to keep few away from the computer.

  If the update of the pilots is not enough, you can contact the computer manufacturer to check if there are problems with the material of the monitor and if it needs to be replaced.

  You can also run the memory diagnostic tool on your computer and check if it helps. Access the link below and follow the steps to run the tool from WinRE Windows Memory Diagnostic.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem 

  Postbacks with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.