CLIQ: camera locations do not save?

Similar Questions

• BlackBerry Z10 camera - pictures will not save

  I have an intermittent problem with my camera does not save the captured images.  I have a lot of spare Go on my SD card.  Anyone run into this?

  So far, so good, thank you.

• Trusted locations does not save

  Updated for flash 11, and I can't add a folder to the "approved files location". Once I have add and 'confirm' and close the settings and reopen, there disappeard. I tried a fresh install, but it does not work.

  Any help is appreciated! Thank you

  This might help: http://blog.vizio360.co.uk/2010/02/flash-trust-file-on-windows-7/

• Settings the Camera Raw does not Photoshop

  I'm going to bridge to open my CR2 files in Camera Raw. I do all the settings I want and then when I save or open in Photoshop, all settings apply with the exception of the reduction of noise! Everything goes no matter if I open it in Photoshop or simply click "Done" and return to the bridge. My noise reduction does not follow... When I open the image in Camera Raw again, the noise reduction is still all there. What is going on?!

  
  

  (Photoshop CC 2015.0.1, Camera Raw 9.3.1 Macbook Pro, Canon EOS 60 d)
  

  Please see the discussions below.

  Camera RAW does not save the changes to the original file

  Camera RAW does not staying in Bridge/Photoshop

  Kind regards

  ~ Mohit

• Roll of photos does not save from camera

  Since 30 December at 14:00 my wife's iphone is not save photos in camera roll. We tried the CAMERA and the CAMERA app + but without success. Seems to work, the photo is taken and after, a thumbnail image is indicated in the lower left corner. I can open the image, but all the options are greyed out (EDIT, SEND, TRASH). If I then go back to the CAMERA, the tile went.

  It has about 550 MB of space the totall 16 GB.

  I can't take screenshots either.

  We have killed all the apps and restart the phone once or twice (in both normal and hard reset). It took about 4500 images is not the problem of 9999.

  We have automatic saving of images PHOTO of Google, there are no photos in the backup after 30 December. The latest 10 photos of GP has not been backed up upward. I can't make these images to be saved. He says only: "preparing backup".

  We also have auto-saving of images to DROPBOX, but with the same result. the last 5-10images in camera cannot be backup up.

  We do not use iCLOUD for backup images.

  It took a lot of photos and images on the new year's Eve, so it would be great to find them, if they are saved.

  Connection to a computer does not help. I can copy, but does remove all images of the DCIM folder.

  iPhone 4 with iOS 9.2

  Make a backup a new computer, in which case there is a way to recover photos and films that took new year eve...

  Fortunately, I had a backup from December 28. So I've erased everything in the iPhone, started as a NEW IPHONE and the camera worked fine. Has made a new CLEAR ALL, installed the backup from December 28. With the exception of SMS and the HISTORY of PHONE CALLS, we believe that everything was there.

  We still have the images and photos...

• After the update (December 2015), Camera Raw does not fit on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  After the update (December 2015), Camera Raw does not on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  Yes, this is the same bug.

  The engineering team working on it.

  We have no fixed timeline.

  In the meantime, you can restore the previous update.

• new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

  There are now 4 computers in front of me.

  Two are laptops 17 inch hp (consumer)

  Two are workstations mobile hp 17 inch (company)

  On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

  On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  This problem has been resolved.

  Right-click all methods have not access external external hard drives and flash drives.

  Sharing, permissions, ownership, administrative changes, all method all failed.

  This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

  The problem has been resolved by:

  (1) determine that he was not a NTFS problem

  (2) using the msconfig to isolate a single service

  When the unique service has been disabled the files on any external drives have been available.

  The service of the problem was the HP Client Security.

  This HP Client Security in its default value is set to deny access.

  Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

  When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

  I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

• GPS recording location is not in LR4.1?

  Hello

  I'm beating my head against a wall trying to export the GPS coordinates.  Here's the situation:

  Lightroom 4.1

  Camera (Canon) FIRST imported from the camera directly to DNG (no info from the current location)

  Location added via the card module and additional metadata (caption, keywords, title, Copyright, etc.) added

  Save location is not the Private value

  Export parameters of metadata "Delete location info" is NOT selected (that is, do not remove it)

  I export to jpg, and the location is not present.  Flickr can't see it and I load it into Photoshop and look at the metadata and location is not there.  I have also used other tools online to verify it is absent, as well as Geosetter.  If I put it in Geosetter, data is then he.  However, Lightroom 4.1 is not save, and I scoured all the parameters that you are looking for other options.

  Help?  This is essential to my workflow, and I would prefer to do as much as possible inside the LR and not having to use external tools.

  Thank you

  Jeff

  They keep changing the names!   It's now a metadata section, sorry.  But you put it at all, so it's anyway.

  My next port of call would be to try trashing prefs, maybe even try a clean user account if you want to exclude a lot of things in one shot.

  Info here on Preferences: http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1148/198/how-do-i-supprimer-the-lightroom-pr eferences-file

  It would also be useful to double check the location of the map is displayed correctly in the metadata Panel.

• When I select "keep without history", firefox will restart but does not save it.

  I use the french version so maybe that some translations are not correct. what I'm trying to do is to forefow delete or simply not save history after that I go to a page. It is said that firefow must restart to save the change, I agree, and when it restarts, nothing is recorded. I also tried to say not "restart" with no effect different however it should work, but as explained, this isn't. I can also change the page that opens when I run firefox for the same reasons: I save 'open a blank page', say ok, the option page closes, but when nothing opened changed again.

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

  Please report back to see if this helped you!

  Thank you.

• HP OfficeJet Pro 8710: Scans PDF and editable text will not save

  When I scan a document to searchable PDF or won't save a resulting file to editable text (OCR).

  The error message says "The Application from HP could not save the file to the specified location."

  I tried to save in various different locations with the same result.

  I can save other formats including PDF and normal images.

  Hello

  Right click on the start icon and select programs and features.

  Locate the I.R.I.S OCR application and uninstall it.

  Then download and run the latest drivers for your printer below:

  http://ftp.HP.com/pub/softlib/software13/Printers/OJ871/OJ8710_Full_WebPack_1881.exe

  Once the installation is displayed, close the specified window.

  Then, right click the button start and select run.

  type %temp%, and then press OK.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the optional folder.
  Right-click on IrisOCR.msi (Windows Installer), then choose install.

  Once this is done, open the HP software and try to scan the image, you can see any difference?
  
  Kind regards
  Shlomi

• I wrote a letter to Microsoft Works and did not save it. Can I get it back?

  Original title: I WROTE a LETTER ON the ŒUVRES OND a NO RECORD CAN I GET IT

  I WROTE A LETTER ON MICRSOFT ŒUVRES AND DID NOT RECORD HOW CAN GET IT BACK

  I am sorry to say that there is not much you can do. Unless you have activated backup feature, of course. If you have activated the backup feature, you should be able to open the backup to the original location.
  Auto Backup works only for forced stop etc. and seems to remove the automatic backup files when you click on "do not save".
  I am sorry to say that you really can do anything. There might be some software extremely thorough out there that can help, but other than that, there isn't much chance.
  I'm sorry, I could not do more for you - this happened to me with a MS word doc once. My brother has deleted an important job, he was upset.

• LifeCam does not work, get a LifeCam error could not save your, photo, audio clip or video clip

  Just got a LifeCam Cinema.

  Installed the drivers-software, plugged the cam, noticed drivers installed.
  Tested by opening the installed LifeCam software. Describes the options to take photo, audio or video. "Or the other option does appear immediately the error" LifeCam could not save your, photo, audio clip or video clip.

  Shows Device Manager is installed correctly.
  Swapping the same USB ports it shows in the software, no device detected, a driver is re-installed during the exchange of the ports, it comes up with the 3 options mentioned before and again the same error message.

  Have also tried Google chat and shows no video, but gives the possibility to do video chats.

  System: Windows 7 64-bit.
  I have full admin rights on the system...

  Christophe ideas?

  Hello Striff,

  If the camera is not detected, it seems to me that the drivers are not installed for the device works, I suggest you reinstall the Lifecam drivers and check if you have the same problem.

  I suggest that you try different methods listed in the following article to resolve this problem:

  Troubleshoot failures to find the new LifeCam hardware:

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• After upgrade to Vista, the desktop Setup does not save, but he returned each time unwanted installation

  My computer (laptop) did an automatic update of Vista. Since the restart, he lost all cookies, and all applications have behaved as if they were never used.  The files are OK. I had to reset the desktop resolution because it came with something too big. But it does not save the installation program, every time that the computer starts again (even after having his sleep), the office returns in a default setting that I don't like.  Why didn't he save properly?  I have to back to the resolution I love every time. The aspect ratio of the sidebar is also evil in this default value. The clock appears as an oval, for example. I must go to the video driver every time, set the desktop resolution seems correct.  In addition, the sidebar doesn't seem to have an option to display seamlessly, but is a big silver margin is too large for my taste.
  My office was working great before the upgrade, now he isn't very good at all.  How can I fix it so it will stay the way I like it?

  Thank you very much for your answer.  I solved this problem.  He has been
  caused by the last windows update. I think that the file was KB2524375. I have
  uninstalled and everything is back to normal. The windows update (which
  says he has been recommended by Microsoft) completely changes the configuration, disable
  Aero, etc. so changes can not be made.
  There is no error message, it was as if he superimposed a very primitive
  version of windows. Of course, I do not recommend this update.
  Anyway, it's fixed and I'm so happy!

  Thank you!
  Rofa1234

• The analyses do not save on computer

  HP Officejet Pro L7680 all-in-One - ethernet wired to the router of capsule appletime.  Wireless for laptop Studio of Dell XPS 1640, 64-bit, Vista Home premium OS. Version 14 HP Centre of Solution.

  Everything works well except scans disappear after scanning.  I rebooted, disconnected and started, uninstalled and reinstalled the driver several times and run the troubleshooting HP software.  Nothing solves the problem.  It worked fine when I first came to this printer, and then one day it no longer works.

  This happened more than two years.  I even paid iYogi to solve the problem and after many hours of them control my computer, they have given up and said that they could not do.  They said I had to contact HP.  I just lived with it because I don't want to invest more money in this problem.  The last time that I asked HP for help with a question, they just sold me a new printer... this one.  This day expertise is probably the last time I'll try to fix it.

  Fake Hi-

  You can try the steps in this post to see if its applicable to your question:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Solution-Center-does-not-save-scanned-files-cue-14/m-p/534675#M13622

  Jeremy

• Windows Photo Gallery will not save the edited images

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  ================================================
  Windows Photo Gallery... Cannot save modified photos...

  No guarantees and proceed at your own risk!

  Good luck...

  --

  (1) try to do a system restore to an hour before
  the problem started.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  --

  (2) I've seen reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (3) I saw reports that could clarify the next steps
  until the question...

  Right click the library icon and choose
  "Run as Administrator"

  --

  (4) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  5) posted by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.