Clock loses time to computer HP G62 laptop but battery OK
Clock keeps losing time. All messages say that the battery must be faulty, but when I run the battery (with or without the external power supply) check the status is always good. What is the reliability is the battery check and he would take the flaws at the origin of the problem of clock?
Otherwise the overall performance of the battery on the laptop does not have seriously deteriorated since the problem of clock started.
I would be grateful for any help.
Hi Tony,.
The battery you need to replace is the RTC (CMOS) battery - the procedure to replace that is detailed from Page 51 in your & Maintenance Guide.
The replacement battery, you need is almost certainly a cr2032 (but controlling one of you remove) which is easily available at any PC shop / electric - an example of this battery can be seen here.
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
my computer HP G62 laptop won't let me connect to this subject says not found user profile can help you
Hello
You can try the following.
Shut down the laptop. Tap away at f8 that you start the laptop to enter the Windows Recovery Console. Use the arrow keys to select Safe mode and press ENTER. If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore. Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration. When you are finished, Windows will restart as normal in order to check if you can now connect correctly.
Another option if the above does not help is as follows.
Shut down the laptop. Tap away at f8 that you start the laptop to enter the Windows Recovery Console. Use the arrow keys to select "Start using last good known Configuration" and press ENTER.
Kind regards
DP - K
-
Computer clock loses time between stop market.
A response was that I could use a change of battery, but I got this Dell computer for a year. Is it possible to change the battery already?
If he loses time between when you turn off and on again, it's a sign that maybe it's that the CMOS battery has failed.
Battery size piece, trickle of power is to keep system settings when the computer is turned off.They cost about $5 to buy.
http://www.computerhope.com/issues/ch000239.htm
http://technofriends.in/2008/05/03/how-to-change-your-CMOS-battery-and-re-energise-your-BIOS/
How to replace a facility above links.
Contact Dell 1 as appropriate just in a secured claim: http://support.dell.com/
Mick Murphy - Microsoft partner
-
Clock loses time (after the recent repair) Windows 7
I had a problem with my computer was off for four days, the button "power on" he had set.
Now, my clock seems to be wasting time (when a computer is turned off). I keep resetting and synchronization of the time, but when or hibernation, he loses time. Any help?Battery is good and no further questions, I can tell. How can I return to precise timing. (doesn't have the problem before the correction of power)Have you checked for viruses? I would try to start safe mode and do a full system scan.
Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.
I hope this helps. Good luck.
-
HP G62: How can I reset my BIOS password on my computer hp G62 laptop?
Hi guys,.
need help for my G62 laptop bios administrator password.
Please, I'd be grateful if someone can help me.
The code that appears for the failed attempts is 54534418
Thanks in advance.
Enter 41492438
Kind regards
DP - K
-
How can I reset my BIOS password on my computer hp G62 laptop?
Please note that I tried the 'normal' procedure or standard used to reset my BIOS password and I noticed in many other positions, this computer (laptop G62) maintains its BIOS data even after removing the battery from the room. I also tried to short-circuit drivers who appear to be linked to the battery to remove all ability and that did not help either output.
If someone has successfully cleared the password for this computer model or an employee of HP with knowledge or the wisdom of how to do it, please let me know. My computer is beyond his support a year date and therefore a tax will be assessed should I call Tech Support and therefore would be too grateful for any help.Thank you - Glenn
PS:
Seems to me that it must be possible for the owner of the PC knowledge.Welcome to Pi-Boss. Try.
34738299
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
I need help on my pc
Laptop HP G62-b80ES
I have enter my password in the bios but not accepted and now system off concert number
68675183
I want to change the language to English...
Please enter:
77753105
Kind regards.
-
Why the boss moves on a laptop, but seems normal on a desktop computer?
I have a problem with this site where the filling of the model (the initial size value) fills the yellow area as it should on a desktop iMac, then on a laptop (Powerbook Mac) that same model shifts to the left instead of appear centered. Both use the layout of office, is that this a field of the different layout. Muse a portable browser slightly differently than a regular desktop browser? How can I keep the picture fill to move on the laptop?
This is the site:
http://www.cherdonna.com/BUILD6/
Scroll down to this area of the page...
This is a screen shot from a desktop computer. This is how it should look like on a laptop, but rather the model change to the left and leaves an empty space of yellow on the right side.
Yes, I did. But I correct the problem by disabling the scrolling animation fill. It seems now the same on the computer desktop and laptop, but I have more neat Parallax scrolling effect in this part of the page.
-
set a password
set a password to protect my computer windows xp laptop, but forgot. to reset the password, how can I in the laptopThis is how to reinstall XP:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to perform a new Installation of Windows XP - Part 1 of 4"
http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm
See you soon.
-
my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?
First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Test your player - create a Bootable CD:
Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors:
http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRDFor Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticJ W Stuart: http://www.pagestart.com
-
HP G62 laptop computer cannot start windows.
Run the test at the start and test drive, both give the same error.
type: startup
result: failure
Failure ID: PG81W4-5L36A1-MFKR4J-6OU5O3 (not sure if they are equal to zero or a letter O in tientirely)
Description: hard drive 1
type: hard drive
result: failure
Failure ID: PG81W4-5L36A1-MFKR4J-6OU5O3 (not sure if they are equal to zero or a letter O in tientirely)
Description: hard drive 1
so, I guess, it's the hard drive, no?
How should I proceed?Additional info:
Model: HP G62 laptop computer
Prod.ID: LF772EA #ABZ
running windows 7
Hello
The error code will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced. This is also consistent with the question of commissioning.
If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.
Kind regards
DP - K
-
I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing that?
Hi Kelly,
Maximum machines, the license can be activated is 2. Somehow, it seems that on your side the same license can be activated on any 3rd machine as well.
Activating the license on any other machine, please select the option to disconnect all other devices and try again.
Reference: connect and disconnect activate Cloud Creative applications (deactivated)
Kind regards
Sheena
-
HP G62 notebook computer: model bios update for HP G62 laptop need: WJ544AV
Hi, I need a bios upgrade for a HP G62 laptop model: WJ544AV but when I search this site a different model appears in the results.
Here are the results:
http://support.HP.com/us-en/product/HP-G62-200-notebook-PC-series/4150047/model/4188395
I don't know if it's okay. I don't really want to install the incorrect BIOS upgrade.
all of the suggestions.
Thank you
Hello:
The number of product that you posted indicates that you have this model...
HP G62t-250 CTO Notebook PC.
If your model has an Intel processor, then you are on the right page.
The update of the BIOS is for models of the Intel only.
-
HP G62: I have hp g62 laptop that I need to replace the hard disk but I don't have a lap desk
I have hp g62 laptop comes with windows 7 Home premium and Microsoft last year offered 10 edition windows Home premium.
Suddenly the windows closed was a message "hard drive does not exist" or "boot device not found", said another time.
I need to replace in the old hdd but I don't have a lap desk. The recovery file was recorded in a single partition on the old hard drive.
How to get started with the new hard drive and recover the old windows, I need help please thank you.
Concerningcomputer laptop laptops installed new hard drive there is message "no partition active" and "no boot device" what I need to do to install windows 10.
I have no office to boot, I used to run the wind. last summer and 7 MS offered upgrade to the wind. 10 how premium and activated, of I need help thanks
Concerning -
Issue of fan of HP G62 laptop, fan no longer works HELP
Basically, I have a HP G60 laptop and cleaned my fan of compressed air and it stopped my laptop computer overheating etc. etc.
HOWEVER, my other half has a HP G62 laptop and its fan is STRONG and is about to overheat and stop.
So I used can of compressed air to clean his fan BUT he completely stopped turning and now I get the error message saying that the fan is not functioning and is not advised to continue with normal use.
I can get on windows. but compressed air (which EVERYBODY recommends) seems to have completely either broke the fan the fan or the dust blown away and arrested.
After several attempts to reboot it came the short do this ticking noise as if the blades have reached something like it leader (who was slow I might add).
Maybe WHAT the bios has detected the fan was blocked and stopped trying to turn? I don't know that I need help or advice before I dismantle it to clean the fan manually.
I know it's quite tedious to an amateur. fans should be the easiest thing to take the most difficult step, but oh, well...
HELP PLEASE
Above all, the "right way" consists of disconnect everything (power, battery, any external devices).
using short, clean air, chips
blowing in the direction that the fan is running normally.
It is possible to make a bad situation worse, of course, but nothing could possibly have a similar end result: laptop on the work table.
Trying to fix something is a good thing in my book.
Failure is never the result of the test, the failure is the result of inaction.
Replace the thermal paste goes beyond to replace a fan. This works. It may or may not be a DIY project. As long as you don't actually damage the harddrive (s), at least the data must be secure, even if you damage more the system.
If the girlfriend isn't happy, all things in the universe may end up like the fan. You could ask him how she wants to go forward - it is his cell phone, Yes?
I do not give advice to hard core on the material, I do not see; I hesitate to give that advice on hw I can see if it's not mine. I have backup systems - if you don't (and therefore cannot do without this system for a long time if you can't fix it fast), then you can consider having the box repaired by a person who is not personally involved. It might be much less traumatic.
No matter what you choose, make sure that everyone is in agreement on the action plan.
No matter what you're doing next to what happened to bring you here. The smile.
BTW: I'm a firm believer in coolers for laptop. Something to consider for later... You can do a search on my many posts on the subject. I tend not to "go" on the subject. The smile.
Good luck!
----------------------------------------------------------------------------------------------------------------
Click on the star of white Kudos on the left to give Kudos for assistance.
Please click "accept as Solution" to say the problem is solved.
Always include: (Computer) product number , printer - model number ,.
Never give your serial number
----------------------------------------------------------------------------------------------------------------
2012 the year of the Dragon!
Maybe you are looking for
-
OfficeJet 8620: How to configure the folder will tune to Scan the computer?
I am able to run a computer Scan > scan to PDF from the printer control panel. The file is placed on my Macbook in the documents folder. I would like to configure the folder in that it places the file. Is this possible? Note I'm not choose Scan t
-
Strange problem with the KING and IMAQ find right 3 edges
So first of all, I noticed that the KING produced by KING features seems to have an incompatibility with the entrance to find right IMAQ 3 edges: In my code, I have the strange problem "IMAQ find right edges 3" is the production of edges that lie out
-
That's what I see when I hit windows update in the start menu: Thank you for your interest to get updates of our site. This site is designed to work with Microsoft Windows operating systems only. To search for updates of Microsoft products are design
-
How to run the installation on a 5 GB pcmcia hard drive, it does not start?
I have a computer dell laptop, which has a non-functional drive Bay, so I use a 5 GB kingston pcmcia hard drive. Recognizes the xp home installation cd and copy of files, only I does not start when the system is restarted, is it a boot disk to start
-
Rundll32.exe - Apllication error
Rundll32.exe - application error... the software exceptionunknown (0xc00000fd) occurred in the application at location 0x7c90e8e5