Clock stops on the pre 2

Similar Questions

• Satellite Pro L10: CMOS clock stops when the OS is not running

  Hello

  We know a reason why the cmos clock would stop when the operating system does not (phone off), the laptop is 18 months old, I've updated the bios tries to give him a good boost, but no effect, he was also in charge for 24 hours.
  Any advice would be great.

  See you soon
  Paul

  Hello

  Usually if the BIOS date/time is wrong and always changes, the RTC battery which is mounted on the motherboard fails.
  In this case the CMOS battery needs to be changed or maybe only removed for awhile

  If your laptop is 18 months, the guarantee must be valid.
  Generally if you have registered on the page of Toshiba notebook the warranty covers all repairs for about 2 years (24 months).

  In this case, I would recommend contacting ASP in your country, because the technician must be able to solve this problem very easily.

  Good bye

• PC clock stops

  Since setting up a new motherboard my pc clock stops whenever the pc is asleep or is cut.  I have reset the pc to sleep and I stop and retsart time service and it is then ok for the session.  Any ideas please?

  Verify that the CMOS battery is actually activated. They often come with a thin plastic cover to stop it unloads during transit/storage before use. If the battery still has his film (or if the battery is duff), you will have this problem.
   
  But I should also mention that if it's a new installation of the motherboard as a replacement for that you used all of the old hardware and disks, etc, have you installed new drivers of motherboard that should have come on a CD?
  
  --
  Terry Farrell - MSWord MVP

  "carolinech" wrote in message News: 6e559256-a944-410 d-b847-550ec6dfdbab...

  Since setting up a new motherboard my pc clock stops whenever the pc is asleep or is cut.  I have reset the pc to sleep and I stop and retsart time service and it is then ok for the session.  Any ideas please?

  Terry Farrell

• INSPIRON 1545 time-clock stopped

  Hello

  My 2 year old grandson has decided to play with my INSPIRON 1545, I had left on while I was preparing dinner. It was touching and hit all the keys at once for a good 3-4 minutes before I could leave what I was doing to stop it as I stupidly thought that no harm could be done at laptop computer system simply by working the keyboard too!

  In 3-4 minutes of him knocking and tapping multiple keys on the keyboard of my laptop closed of the isolates and it was not until the grandson returned home a few hours later I tried to restart the laptop and discovered that it would not 'start '.

  When I turn the laptop on I see the LOGO DELL page and for about 30 seconds, I get a black screen with the message "Time-of-day clock stopped" in the upper left. I tried everything to go beyond this error message such as turn on by pressing constantly F2 and F12 and F8 but... nothing is only two screenshots I get are the DELL LOGO screen then black screen with "Time-of-day clock stopped" message.

  I tried calling DELL technical support, but I stayed on hold every time after that I gave them the 'service number'... I give up after 10-15 to be kept waiting... I now gave up on 4 - 5 times after having gone through the same exact ritual with DELL technical support 4 - 5 times without ever actually learn to speak to a "live" technician

  I hope someone here can give me some advice as to what may be the problem and what I can do to bring my laptop "back from the dead"...?

  All responses will be very well appreciated and followed... so, more we're crazy please lol. Maybe one of you has experienced this problem yourself at some point, or maybe you have a suggestion as to what could be the cause of the problem... maybe someone could tell me just what the "Time-of-day clock" is and where it might be, to be honest I have no idea and has none of my friends whom I've asked...? ... N °

  Quick intervention is required as the clock time needs re-winding

  Thank you

  Love today

  Tina {aka alfiesgirl}

  The stopped clock time the clock chip has no means.  You must be a repair shop that can weld in a new (figure on $150 or more) or replace the motherboard (or more with work on this double figure).

• Time stops on clock Gadget in the sidebar of Vista 64.

  So far, I'm pretty happy with my Vista experience.

  Everything works well except the standard on my sidebar gadget clock (while all the other gadgets work fine).  After having installed and re - install the clock gadget, it would go for 10 seconds and then it would stop.  I'm running Vista 64 w / IE8 on a Thinkpad W700ds w / QX9300 + FX3700M graphics.  I have also tried other clocks gadget from third parties without success.  The problem persists even when the double screen is not used.

  Please advise.  Thanks in advance for your help.

  Wow... I have reviewed many of the threads, and it is clear that many others have the same problem after update from IE7 to IE8.  I had too many come back to IE7 to get my sidebar feature is working again.

  I just hope that Microsoft would release a patch soon to eliminate this annoying problem of otherwise well-designed operating system.

  See you soon,.

  Ken

• Toshiba! Stop with the bloatware on your laptop!

  Any laptop I've had was horribly filled with this junk.

  Toshiba face recognition
  Additional package from Toshiba
  Toshiba pc health monitor
  Toshiba disc creator
  Toshiba hardware configuration
  Toshiba eco utility
  Toshiba recovery disc creator
  Toshiba internal modem region Select utility
  Toshiba extended tiles for windows Mobility Center
  Notifier agreement Toshiba
  Toshiba flash cards support utility
  Application of quality Toshiba
  Toshiba service station
  Install driver and application of Toshiba
  Application of Toshiba web camera
  Toshiba Upgrade Wizard
  Toshiba resources page
  Toshiba assist
  Toshiba software modem

  Please stop gunking your systems with clearly useless software that no one would ever use, or at LEAST make it optional in the first commissioning.

  I could lose money because my customers will stop coming to me to get this garbage removed, but it would allow me to save you the trouble of this repetitive chore

  King regards, Aaron Horner - end user and Technical Support of 12 years

  Hello

  Many users think that the pre-installed tools are not necessary: it's fake
  Laptops are not desktop PC. Many portable computers of new generation supports additional features, which must be controlled by software!

  -VAP (value added package), utility of flash media Cards are needed to control the FN keys.
  -Toshiba recovery disc creator is necessary to create the own recovery disk!
  -Toshiba eco utility control the energy consumption of the laptop and helps you extend the battery work!
  -Facial recognition Toshiba is necessary to get the face recognition to work... This feature allows windows to connect with the image of the face

  - and so on...

  As you see it s not bloatware, but really important means of course if you don t want to use these functions for portable computer, you can remove this

• Media Player Windows XP automatically wrong info for my titles. How can I stop all the automatic update of news media?

  Windows XP Media Player is automatically putting the wrong info for my pieces for example the name of the album and the cover.

  How can I stop all the automatic update of news media?

  Windows XP, the version of Windows Media player to date. ' Retrieve additional information on the internet "is not checked.

  "Rearrange music in rip music folder, using rip music settings" is not checked

  "Keep my ratings stars as global ratings in files" is unchecked

  "Maintaining the codecs automatically" is unchecked.

  Under Privacy Options, everything is disabled except "set clock on devices automatically.

  Thank you for your help in this endevor.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what version of windows media player do you use?

  Try the fix tool in the following article and verify.
  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  See also:
  Resources for the resolution of problems in Windows Media Player
  http://support.Microsoft.com/kb/843509

• System clock stops working

  The clock stopped working as soon as I close my sytem. When I restart is watch the time I closed the last.

  However, on the Internet and upsating, it gives the current time.

  I think your motherboard battery is dead. Replace the battery and set the duration of BIOS setting, hope this can solve your problem.

• Records of Vista Media Center starts and stops at the wrong time

  I use Windows Vista Home Premium, SP1 and that you may have noticed that when I schedule recordings for some a particular channel, Media Center starts 2 minutes beforehand and ends 2 minutes in advance.  This affects only shows record from my local affiliate Fox - all other shows for other strings start and stop at the appropriate time.

  I checked the system clock with the start times of the shows and both are correct.  In fact, I saw one day Media Center started to record for a show that did not begin until 08:00 at 19:58 (according to the system time).  I had my TV on at the same time and was able to verify that the program in question had not yet begun, so the flow of the internet was sychned with the dissemination of local transmission.

  It's very frustrating because I miss the end of some shows and cannot always extend registration ends because I'm ordering another channel, the next hour.

  I have the same problem with the FOX network...

  -1 make sure your clock automaticly sets in the internet and update once by pressing the link (which makes that he can see the time server)...

  There are two ways you can go with this:

  -If your departure time is correct, then just go to the Planner and choose the program (or series) you are trying to install, select the recording settings (or adjustment of series) or advanced setting... There is an option to "stop recording" 1 min, 2 min, 3 min, 5 min, until 2 hours after the recording is finished... I have mine set to 5 minutes after, and she fixed it...

  -If the starting time is disabled (as mine is), to enter ERM and manuver to tasks > settings > TV > recorder > recorder defaults

  This is where you define all the flaws of the recorder, find "Start when possible" and "Stop when possible", 4 min value (max allows MCE)... Save and exit, restart the machine too...

  You should be good to go...

  PS, I just read the last sentence in your post, you must only have a tv tuner card in your machine (I have two, and that's the reason why I bought two), so you can always have a problem when recording two different channels (back to back on the same channel should work okay).

• Clock stops every time computer is closed

  My computer's clock stops whenever I stopped or paused.  I thought it was the cmos battery and replaced it, but the problem started again.

  The problem started shortly after I installed windows 7.  What maybe a software problem?

  Hi ppphhh,

  My first suggestion would be to see if the time service restarting may solve the problem. Follow the path below to do the same.

  Start> type Services.msc in the search bar > search for time service Windows in the window that opens > restart the operation of the service.

  If restarting the service of time will not solve, try it at "stop" then restart your computer.  He should stop and try again. If it is not manually, navigate to the location and restart.

  If that does not solve the problem, then you can look for any conflict of third-party application. Perform a clean boot and see if you can find any third-party application which is in conflict with the normal performance of the computer.

  To perform a clean boot on a computer that is running Windows 7, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/929135

  In addition, refer to the section on how to restore your computer to a Normal startup mode

  Let us know for any further assistance.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Clock stops when portable HP6715B is off

  clock stops when portable hp6715b is off

  Original title: time clock

  Looks like it is time to replace your CMOS/RTC battery, which is located on your motherboard. Refer to the Service Manual of your laptop to http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02834030/c02834030.pdf, for the location and type (they vary in appearance, but a lot of them looks like a watch battery). If you feel uncomfortable, replacing yourself, have a pc do service technology...

• Organizer-slide show stored location of the files in the PRE 13.

  (This will be the third time that I posted this question. It is is not clear to me that the question was, in fact, posted on the forum.) :

  According to the procedures given by Grisetti in his new book the 13 PRE, I created a slide show in the PRE 13 Organizer section, published in the Slideshow Builder and registered with the name several times during the process of editing/organizing. The next day I went back to continue editing, and the program could not find. I don't know where PRE 13 stops (or names) of the project files (an organizer slide show, in this case), so I couldn't navigate to find.  Instead, only opened, media browser which included all the slides in a random order, as well as others who were not in the slide show, and all titles were missing.

  I assume that the slide show as I created it is somewhere on the computer, but I have no idea where the program has decided to keep. Using the Organizer to create slideshows, seems to rely on presentations in canned and default settings on things like the speed of the transitions between slides, which seems too fast. The presentation finished looks that the creator had a plane to catch. It doesn't seem to be a utility in the Slideshow Builder to set the speed of the transitions between slides, unless the show must be worn during the PRE 13 video editor. Grisetti book is not in the details regarding the editing of slideshow. The question remains: "what happened to, where is my slideshow?

  PRman

  Thanks for the follow-up.

  Although you can put scene markers in the timeline panel content at the beginning of each film so that the viewer can select what movie to see, there is no end of playback and return to the menu after playback of the film (except for the latest movie on the timeline). Example... If you had 5 and the 3 selected Viewer film in the scene selection page, the reading would be film 3, 4 and 5 before return to the main menu. DVD-video to DVD disc, you can use a stopper at the end of each of these films (except movie 5 in this example) so that the viewer can select a movie, the movie plays, and, at its end, there is the return to the main menu. With AVCHD and Blu - ray burn to disc, you can place the markers of judgment on the content of the timeline, but these stop markers will not work in the reading of the final product disc.

  So, for your question

  Is that what you try to say about to combine several slideshows with PRE 13, once a slideshow created using a format of menu, would not stop at the end, but go the next show, except order manually?

  Yes.

  Please let me know if the above explanation made things clearer. But if any doubt, do not hesitate to let me know and I will introduce the thoughts in a different way.

  Just in the note on the case, never place a stopper at the end of the last point on the contents of the timeline. It is not necessary here and often causes problems in burn it to disc.

  I explored the tryout first items 13 to date on a global basis. Once I settle with a purchased version, I'll look to see if there's more that can be done with them in these special areas that are visible on the surface. So far, it seems that it is what it is with regard to this new slideshow of 13 elements Organizer.

  RTA

• Anyway to avoid the pre-rendered?

  Hello community,

  Work with adobe audition from 5.5 and I've updated the updates came out.

  The music I did usually consist of 10 to 15 titles, 32 bit (float) and 192000 Hz.

  The only way for me to edit without hearing pop and Crackle is all pre-rendered. I have the upward Task Manager while I work and it doesn't look like my CPU is under development that hard. I have an i7 - 4930 k overclocked to 4.5 Ghz, 32 GB of RAM to 2400 mhz, the operating system is on a RAID-0 configuration, hearing is a separate SDS and I have the pictures on another HARD drive.

  I was wondering if there was a way for me to avoid the pre-rendered and still not heard the POPs and crackles.

  Need me a sound card to avoid this problem?

  I went my audio with bad settings?

  My drive configuration is not optimized correctly?

  Thanks for the help,

  Arren

  TheCheeseling wrote:

  The music I did usually consist of 10 to 15 titles, 32 bit (float) and 192000 Hz.

  This is music for bats? You ask the streaming system to do work at least two times more than that would be even a desperate optimist working at 96 k, and even they record anything else of noise on half of their disk space!

  The only way for me to edit without hearing pop and Crackle is all pre-rendered. I have the upward Task Manager while I work and it doesn't look like my CPU is under development that hard. I have an i7 - 4930 k overclocked to 4.5 Ghz, 32 GB of RAM to 2400 mhz, the operating system is on a RAID-0 configuration, hearing is a separate SDS and I have the pictures on another HARD drive.

  I was wondering if there was a way for me to avoid the pre-rendered and still not heard the POPs and crackles.

  Need me a sound card to avoid this problem?

  I went my audio with bad settings?

  My drive configuration is not optimized correctly?

  The bit I in fat frightens me more. Try seriously to use its edge to 192 k sampling? It's positively crazy! The onboard sound devices are of very poor quality and almost certainly do not work natively at this rate anyway, there will be on-the-fly resampling going on. This demolishes the sound quality is beyond comprehension.

  Humans can hear (if they are really young) up to about 20 kHz - this figure fall considerably in adults due to presbycusis. Past audio sample. humans to point higher can hear requires a sampling frequency of 44.1 kHz no more. There were old arguments about the sampling rates higher "sounds" better, but with modern audio devices as oversampling instead of use the filter brick wall, it is absolutely not benefit anyone to go beyond that. And the sample rate only affects the frequency the higher that can be recorded (half of the sampling frequency, known as the Nyquist frequency) - does not really something to do with the 'quality' or anything else.

  What this means is that you can save a lot of hard work in your readers. The reason why you hear clicks all by checking only the computer is simply because you're trying to broadcast four times more data that you need. The other thing that I discovered recently is that overclocking is sometimes detrimental to the performance of the system in a strange way. If the processor does not work hard, then you simply have not need for clock too it - you just warm it more!

  If you want to make serious work to audition at all, you need an external audio device, Yes. The quality of these, even the least expensive, is significantly better than any embedded device.

• What is someone is able to pause a video using triggers to pause/stop on the timeline?

  I Don t average of spam the Board due to a problem I can´t solve, but is there anyone out there that handles the following:

  1. import a video on Board (just let´s say it s long of 20 seconds for this example).
  2 reading of the video from the beginning by a 'play' button.
  3. making the video stops automatically at different intervals by the pause/stop setting triggers in the chronology of the scene.
  4 playing do the video blog posted in break / collapsed by clicking the play button.
  (Example: when clicking on the video would play to the 5 second mark and then stop because of a trigger stop/pause 5 seconds mark.) To keep on playing the position of stop/pause 5 seconds you´d have to click play again)

  If even, what triggers the timeline that you use to stop/pause the video?

  You´d be my hero if you could help me with that. I ve been tried for three days straight now.

  OK, I managed to get this working. That's what I had to do, for anyone who might know rape the same mind...:

  1. turn the video into a symbol.
  2. on stage, symbol and video not autoplay.

  3. set play in video playback at the beginning of the video.
  4. set the break in the video playback at the time preferred on chronology of symbol.
  5 expand as much as you can about the chronology of symbol and set trigger 'stop all' for the symbol right after the break reading of the marking.

  6. setting game in video playback just after the "stop all trigger" marking.
  7. create the button with the symbol of action game.

  Now, you can play a video that stop a pre game break and make countinue to run recliquant on the play button.

  For me, nothing else has worked. The buttons pause and stop video features didn t do something when you don't do what I did above to the letter, even when used in that I found a very logical way. Adobe should address these things if they want on board to be a common tool for everyone to use. I know I'm new to this, but if I upload a correct video, read it in the timeline and just insert a basic video pause or stop all off and nothing happens, well then the basics are neglected. I shouldn´t have to go through trial and error ALL the time.

• AutoPlay and if stop at the last image does not not on android Tablet

  I'm trying to use folio Builder to make a portfolio for my work and post it on my Nexus 7 Andorid tablet.  The opening page is a video that should stop on the last image.  After reading many articles, it seems that only iOS is able to use these features, and it won't work on android.  Are there workarounds?

  In early February, we will have our new native Viewer available in large pre-release Android, and you will be able to compile a version using this new application that supports the stop on the last image. Until then, no, there is no work around.

  Neil