System clock stops working

Similar Questions

• System Restore stopped working. Help?

  Restoration of the system just stopped working. I restarted my computer this morning and when it started, my firefox sites are no longer there. Usually, a site happens that States, «well, it's embarrassing...» ", but he did not come and it seems I've lost my sites that I really needed... but don't remember their location. How can I get that back and how can I avoid this from happening? I use Firefox 4.0.1; Windows 7

  Firefox button - then - story > restore previous Session

• I get an error message saying that the "Microsoft Network Inspection System" has stopped working and it is closed. What does that mean?

  Microsoft network inspection system has stopped working and closes. What this means, and is there a solution?

  original title: NIS has stopped working

  Hi Travispersons,

  You can read the following article and see if it helps.

  Install the latest Microsoft Security Essentials definition updates

  Hope this information is useful.

• ' Spooler Sub System App stopped working and was closed "__MS Vista Home Premium with SP2, 4 GB of RAM & 32 bit OS.

  ' Spooler Sub System App stopped working and was closed ".
  MS Vista Home Premium with SP2, 4 GB of RAM & 32 bit OS

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• LaserJet CP1025 Color - PC system tray stops working whenever I have send a doc to the printer.

  LaserJet CP1025 colour connected via direct USB for WINDOWS Vista 32-bit. I have the latest drivers, applications, and firmware for the printer, but the system tray stops working whenever I print a document. I tried this on Windows 7 via USB and get the same problem. Why does this happen?  I have another printer connected to the PC and I deleted all other HP drivers so that they don't interfere with the laserjet.

  Thanks for the update. I also found another thread where a lot of troubleshooting has been done, but the problem persists or is fixed only to reproduce:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/LaserJet-CP1025nw-HP-system-tray-has-stopped-working/TD-p/1226639

  I noticed it happens on XP, Vista and 7. I recommend updating the firmware first (if you have not done so) by going here:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=LJ-86491-5&CC=US&DLC=en&LC=en&os=4062&Product=4052957&sw_lang=

  In addition, in the printer preferences, disable bidirectional printing, which is located by clicking right on pinter > choose Print Properties > click on the ports tab > uncheck bidirectional printing.

  Let me know if either of those who help.

• System just stopped working

  My system stopped working. My singal radio does not work and other problems r also passes. I was wondering if I could get another CD of Windows XP, because I've lost mine and someone who helped me fix it says that that's what I need. Can U please call me to the *.

  It is a forum for Windows 7, Windows XP. Its respondents are volunteers from the general community of Windows, not Microsoft employees. They won't call you. However, you might be able to buy a replacement from here CD: http://support.microsoft.com/default.aspx?scid=kb;en-us;326246.

• System Restore stopped working on its own

  I went to use the system restore as I have several times in recent years (suspecting slow start could be due to a corrupted system file). Don't work - get a message that the restoration could not be completed. Tried several restore points; same thing. Even though I knew that I do not turn it off, I checked to make sure, and no problems - it is turned on (the box disable is not checked). I even tried to create a new restore point, rebooted and tried to restore it. Same error message. Any help as to why it has stopped working or more importantly, how to run again, would be appreciated.

  On a separate note, I still have my original duly paid for WinXP Pro disk and it wouldn't simply reinstall. But do not want to try if I'm having trouble getting activated. Did I meet a problem activating the latter since there is a record of me already activate this copy in 2008?

  Thank you.

  You are welcome Bert

  We have confused the system restore with the recovery partition.

  Please mark the thread as a "response" to help those who are looking for help to restore the system.

  .

• When I turn on the computer, I get this message - COM + Event System has stopped working. How can I activate this return?

  I had virus protection total defence installed. This occurred immediately after.

  Hello

  Thanks for your answer to my question. I was about to start step 2, by performing a boot minimum when a message pops up informing that 2 programs were slowing down my computer and also to stop because they were also running. Ironically, these programs I've ever used has appeared on my computer advertising protection against viruses and to speed up the computer.

  I did not purchase the license if it comes to start up all the 3 or 4 days telling me that my computer is slow.

  I uninstalled both programs, which I won't mention for obvious reasons and the event system Com + message did not return after the computer has restarted 3 times. Apparently, the problem has been resolved, but I will continue to have oversight. If the problem returns I'll restart and inform you about the results.  Thanks again for your expertise. guavaridgemb

  Thanks for posting your question in the Microsoft Community.

  I understand that when you turn on the computer, you get an error message indicating that COM + has event system stopped working. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the steps and check the question below:

  Step 1:

  Check the event viewer for the logs of error from the links below.

  Open Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer):

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

   

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

   

   

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Step 3:

   

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

  http://www.microsoftsafetyscanner.com/

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

• Problem with the printer driver. Get a spooler of saying error massage under system has stopped working.

  I installed the printer driver (HP Officejet pro K5400) to my machine and got the test print as well. but after that when I try to print, I get an error saying Spooler subsystem massage is stopped and was closed. What can I do for this. I tried to reinstall the software and start manually, but all failed.

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I get a pop up saying that my dell security system has stopped working what I have to do to stop it

  from the windows of downloads last week I get two pop ups saying my dell security system does not work and then another said that they are looking for a solution but that my system shuts down.  What should I do to get rid of this

  You should ask your question in the forums of Dell support.
  http://en.community.dell.com/support-forums/desktop/default.aspx for desktops
  http://en.community.dell.com/support-forums/laptop/default.aspx for laptops.

• Everytime I turn on my laptop, I get a warning that the Data Execution Prevention System has stopped working. Any ideas how to fix this, please?

  Running Windows Vista family - that's all as far as I know!

  Hi Norfolk broad,

  Remember to make changes?

  Method 1:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  See the link below for more information on the execution prevention (DEP) data
  http://Windows.Microsoft.com/en-us/Windows-Vista/data-execution-prevention-frequently-asked-questions

• Upgrade to XI and the C 'system' command stopped working?

  I developed an addon easy to launch an application from drive (giving it the doc currently open as a parameter). This works very well with Adobe X but not at all with XI.

  The code is essentially:

  int a = system("C:\\test\\text.exe");

  If (a! = 0)

  {

  sprintf (str, "could not find application (%d)", has ");

  AVAlertNote (str);

  }

  ... return is - 1

  I tested on two computers (two Win7) - the plugin works as expected in the X, but not in the XI.

  The plugin is triggered in both - I put AVAlertNote in and they pull all the way - the only difference is that in X, it returns 0 and opens the application, and XI, it returns-1 and does nothing.

  I really need the plugin works on X and XI - I'm doing something wrong? Security settings changed from X to XI?

  Thanks in advance for any advice,

  DOM

  I wonder (but I don't really know) if that could be affected by the protected sandbox sand. I thought that plug-ins have been disabled in safe_mode anyway, but maybe not...

• Message by saying,"Network Inspection System has stopped working and the program was closed. »

  I backed up my pc, I've defragmented, I tried to create a restore point that was earlier with no luck. I love my Inspiron, but I am concerned about the speed and the freeze ups. This problem has stopped my Internet pages. Grrrr, DR PC?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run the scan for viruses online on the computer and check if it helps:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• repair of system application stopped working and was closed

  the above message appears frequently

  Hi Nathalie,.

  I will need some additional information to help you best.

  O when exactly do you get this error message?

  O what is the exact error message you get?

  In the meantime, you can follow the instructions below that may help you resolve the issue.

  Method 1:

  Follow the instructions to start the computer in safe mode.

  1 turn on the computer or restart the computer

  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.

  If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.

  3. ensure that the safe mode option is selected.

  4. press ENTER. The computer then begins to start in safe mode.

  Check if you have the same problem in safe mode as well.

  Restart the computer in Normal mode after checking the issue.

  Let us know if you are able to start the computer in SafeMode with on all issues.

  Method 2:

  Analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  1. At prompt command, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• My backup system to stop working on my computer: "backup failed from Windows while trying to read from the shadow copy on one of the volumes to back up.

  My back by abandoning work on my computer, it worked for the last 3 years and all of a sudden I have an error message "failure of the Windows backup while trying to read from the shadow copy on one of the volumes to back up. Please check in the case where the relevant error logs. "How can I fix this so I can get a full backup?

  original title: shadow copy error
  Hello
   

  See the methods listed in the article mentioned below and check with the question.

   
  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455
   

  I hope this helps!