Clock stops every time computer is closed

My computer's clock stops whenever I stopped or paused.  I thought it was the cmos battery and replaced it, but the problem started again.

The problem started shortly after I installed windows 7.  What maybe a software problem?

Hi ppphhh,

My first suggestion would be to see if the time service restarting may solve the problem. Follow the path below to do the same.

Start> type Services.msc in the search bar > search for time service Windows in the window that opens > restart the operation of the service.

If restarting the service of time will not solve, try it at "stop" then restart your computer.  He should stop and try again. If it is not manually, navigate to the location and restart.

If that does not solve the problem, then you can look for any conflict of third-party application. Perform a clean boot and see if you can find any third-party application which is in conflict with the normal performance of the computer.

To perform a clean boot on a computer that is running Windows 7, follow these steps.

1. click on start, type msconfig in the search box and press ENTER.

If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

2. in the general tab, click Selective startup.

3. under Selective startup, clear the check box load startup items.

4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

5. click on OK.

6. When you are prompted, click on restart.

7. after the computer starts, check if the problem is resolved.

If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

http://support.Microsoft.com/kb/929135

In addition, refer to the section on how to restore your computer to a Normal startup mode

Let us know for any further assistance.

Varun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • Hello everyone, after correctly installed the creative cloud adobe now I want to update, the program also tells me to do. But the problem is that connection only goes up to 2% and stops, every time freaking. Weeks before. What is the problem? And Yes

    Hello everyone, after correctly installed the creative cloud adobe now I want to update, the program also tells me to do. But the problem is that connection only goes up to 2% and stops, every time freaking. Weeks before. What is the problem? And Yes, there is an internet connection

    Good afternoon

    Thank you for your response. It was the right solution, but I missed something in your response. I had to start several times to download / update. Throw/delete (or the procedure of the description) files don't get past not like you described, but I tried something myself and it worked finally.

    But I have to ask: If this problem continues, of course, that a workaround is available, why is this a problem in the software persists, exist?

    Maybe you can't give answers, but I'm just wondering, well thanks for your help.

    Green eyes greeting

  • Windows firewall stops every time I start my computer.

    OT: I have to pass Windows Firewall, every time I start my computer. What is this caused by a virus or a bad setting in Windows?
    Whenever I turn on my computer, I check that the Windows Firewall is enabled. It is still off and I have to turn it on.

    Hi Tony McLaughlin,.

    1. what operating system is installed on the computer?
    2. are you aware of any hardware or software changes, prior to the beginning of the question?
    3. you have any third-party firewall installed on the computer?

    Method 1
    The Windows Firewall will close if you have any third-party firewall is running on the computer. I suggest you try the steps from the following link:

    Windows Firewall is turned off every time I start my computer
    http://TechNet.Microsoft.com/en-us/library/cc749262 (v = ws.10) .aspx

    Method 2
    To start the Windows Firewall service.
    a. Click Start and all programs and type services.msc in the run window and press ENTER.
    b. find Windows Firewall services and put him automatically and rstart services and verification.

    Additional information:
    Security Warning: the Windows Firewall is disabled
    http://support.Microsoft.com/kb/2288085

  • Desk clock stops when XP computer is in Hibernate mode

    When I start the computer from hibernation, the desk clock shows the time that has begun hibernation. When I start the computer once it is off, the clock shows the correct time.

    I am running Windows XP Service Pack 3.
    Any ideas?

    Thanks John,

    The problem seems strangely disappeared suddenly and unexpectedly as it happened. But I'll keep that in mind if it reappears.
  • installation stops every time at 33%

    I tried to update Flash six times now. I restarted, updated everything, make sure we have a strong connection. Here are the details:

    This is a macbook pro with the latest update of Yosemite. When I try an update, everything goes very well at first. All guests etc. are functioning normally, and when I double-click the Flash icon it opens a window with a "recovery" update progress bar. It starts the process and hang up to 33%, where it then remains indefinitely. A few times he went to 34 or 37% but it was a false hope, it still gets hung.

    Every time that I wait for 30 min or so to be sure, then stop, reboot, try again. Same question every time. Is this a problem with the Adobe servers? If it was my connection it wouldn't hang up in the exact same place every time, it hang at random (I streamed video between each Setup attempt to verify a solid connection). Needless to say, I'm on a wall. What to do next?

    I had the same problem.  Later, I found a post that says use this link: [Please always download updates from Adobe to avoid malware] http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

    It's worked for me.  Good luck.

  • my Illustrator CS4 keeps stopping every time

    HELO my Illustrator CS4 maintains close every time I tried to click on the 'OPEN' on the splash screen that ask what you want to do.

    Please provide me a solution, I have recently reinstalled the entire suite CS4 on my windows 7 for a second time. The first installation of most of the applications had just dissappeared.

    Really trash the prefs? If this is not the case, do. Desp this could be anything from the permissions problems graphics driver problems when you try to access specific folders, but since you did not provide any info, it's anybody's guess as to what is perhaps the real cause.

    Mylenium

  • Windows Defender said service stopped every time that I reboot.

    Windows Defender says that the server has stopped work on almost every reboot, at the same time that it does not say that, the window opens again say that the computer is good.

    Hi Chris-50 characters,

    Welcome to the Microsoft Answers site!

    We need more information to help you better question.

    (a) a) since when are you facing the issue?

    (b)
    (b) have you made recent changes to your computer?

    (c)
    (c) did you do the latest updates?

    (d)
    (d) what is the exact error message you get?

    However, you can try to change the startup mode of the Service from automatic to manual and run it and see if it can resolve the problem. Check because if windows

    Defender service is enabled. Follow the steps below to activate the service, restart the computer and check if the problem is resolved.

    (1) 1) click Start

    (2-2) type Services in the search bar

    3 (3)),right click on Services and select run as administrator

    (4-4) find Windows Defender in the new window that opens

    (5-5) double click on Windows Defender to open the Properties of Windows Defender window

    6) 6) on the tab general in the Properties of Windows Defender window, select the Startup Type Manual

    7) 7)under the Status of Service in the same window set it start.

    If the steps above did not solve the problem there could be some conflict with the Windows Defender security software to give the particular error. Perform a clean boot and see if it can resolve the problem.

    To perform a clean boot on a computer that is running Windows 7, follow these steps.

    1. click on start, type msconfig in the search box and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the Load Startup items check box.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

    http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode

    Hope this information is helpful

    Kind regards
    Varun J
    Microsoft technical support
    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

  • Qosmio X 300 - 13V stops every time

    My computer laptop toshiba qosmio x 300 - 13v. She stops erverytime...
    If I'm in the middle of a game or simply get on the internet it quickly stops went al...

    I have a cooler under the laptop...
    I don't know what's wrong, but can someone help me what I could do?

    Please

    Hello

    In my eyes it s a typical problem of overheating.

    All devices operate at high performance all in game and produce a lot of heat.
    If the cooling modules n t work correctly, the temperature of s notebook would arise at a critical level and the laptop would be turned off in order to avoid that the pieces of equipment against damage.

    In your case I would recommend to clean the cooling fans and vents.
    Use the jet of compressed air. These sprays will help you get rid of the dust and debris.

    In addition, you must use a Toshiba graphics card driver.
    This driver supports thermal protection that helps to reduce the dissipation of the heat created by the graphics chip.

    Check it!

  • laptop stops every time I got close the lid

    Hello

    I have a Presario C700 laptop, whenever I close the lid of the whole computer has recently

    to restart when I open it again. Sometimes a message appears saying its audit of the

    discs, but then the same thing happens right after.

    Help, please!

    Hello

    In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

    sfc/scannow                (Note that there is a space between sfc and /)

    Let the entire process, then the output type and press ENTER.

    Then, click on the Start Menu, click computer, left click Local disk C once to highlight, right-click Local disk C and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Part of this process will require a reboot to check the disk.

    When this process is finished, stop the laptop again.  Then typing away to f10 as soon as you press the power button to enter the menu of the bios.  Under Advanced Options or diagnosis tab, you will find the possibility to run tests on the hard drive and memory.  Launch the two tests and post back with the results.

    Kind regards

    DP - K

  • How can I get Firefox stop EVERY time I open the opening browerser "Welcome to Firefox". It opens "Wecome.." and my home page.

    Whenever I've updated Firefox to something higher to 3.xxx, whenever I open the browser, "Welcome to Firefox" and my home page opens. How to make "Welcome to Firefox" to stop opening? Also... all colors are missing from the menu bar. All text is white... Bill

    Hi wbricki,

    You should look at this article on this specific issue and Preferences not savedarticle. It should give you all the information you need!

    If this does not work:

    1. Enter about: config in the address bar
    2. Click I'll be careful, I promise you if prompted
    3. In the filter field, type Startup
    4. Double click on startup.homepage_override_url
    5. Delete the text string, and then click OK
    6. Close Firefox and reopen the window to check that it worked.

    Hope this helps!

  • I have three extensions that continually reinstall every time Firefox is closed and restarted. Why is what is happening with these only three Add ons?

    This is regarding firefox 4.0.1. Since I got this version of firefox, it seems that three addons continually reinstall every restart Firefox. These three addons are Lazarus recovery form, NoScript and ColorfulTabs. I wonder if it's something to do with firefox 4, or is this issue related to these addons?

    If you visit their home pages, see the following articles for a few suggestions:

  • Why is windows defender stopped every time I turn on my compurtrer

    Defend Windows is turned off when I start my compurter and sometimes even if I'm on it, I'm so constqntly again.

    WHY?

    If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
    Bottom line: it's ok.
    It's normal.
    List of AVs which will stop Windows Defender:

    Norton
    McAfee
    AVG
    Microsoft Security
    Essentials

    If you don't have AV programs above, here's how to restart Windows Defender:

    Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
    topic status , it must be said... Has begun
    under Startup Type, it must be said... Automatic
    If it does not say that, right click on Windows
    Defender > click Properties >
    in Startup Type, click on the pointer to the right and select automatic
    to the service status, click Start
    Click OK when finished.

  • Almost every time I shut down my computer, I get an error message from Adobe cef helper.exe.  Should I uninstall and reinstall all Adobe applications?  I have Adobe Acrobat XI and CC Photoshop on my computer?

    I get a message from Adobe cef stop help tool.  I have to click 'OK' to get my machine stopped every time.  Have I not a conflict between Acrobat XI and Photoshop CC.  Can I uninstall and reinstall Photoshop?  Do I need the assistance programme, and if not, how can I remove it?

    Thank you very much.

    Hello

    Please, try the following steps:

    Kind regards

    Sheena

  • Clock stops on the pre 2

    I can't find for the Pre 2, but a search reveals major problems with the internal clock in many products of Palm / WebOS 2.x.

    My problem is that whenever I have turn off the display of the clock stops. Time network or not makes no difference. The clock works if the phone is on the touchstone charger, regardless if the screen is on or off.

    There is no application synchronization clock for the pre 2 and I checked that I have the latest WebOS. The phone had behaved this way since I got it two weeks ago. Restarts, or even the battery doesn't help either.

    Any suggestions?

    I got the unit replaced by Palm and now is able to tell the time correctly.

  • Muse jamming every time I will publish and no such Id mapping, said?

    When I go to publish a muse site it stops every time that 41% and said that there is no such Id mapping... It's crazy... Please can someone tell me how to resolve this...

    Please see my post here Re: I can paste vectors in muse now, he appears to listen to samples and even in a preview of the browser, but not when I'm downloading..

Maybe you are looking for