clone issue

Similar Questions

• Clone issue of model

  I've never tried this option, but want to check with you before trying it since I will be cloning a VM production, so don't want to not messed.

  I have a virtual machine and I have to make 2 NEW VM exactly like the existing one... do I use Temp cloneto or snapshot option to create a new VM 2 off an existing one? Thank you

  Remember that it is a clone, an exact replica of the source. Thus, for some reason you need to turn on, make sure just what syspreped or the network adapter is connected.  Except that you should be fine.  Then you can deploy off the coast of this model using the customization specifications, so it will be deployed as a "new" customer.

  If you believe this or any other answer was helpful please consider marking as 'correct' or 'useful '.

• Issue of Clones...

  So I have a 'gold' image with a few snapshots created on this subject. I turned off the virtual machine and start the wizard on my Server View Manager to deploy this virtual machine from using technology "linked clone. The question is when I get to the screen to "default image" screen, it displays no snapshots of the virtual machine. I have other pools clone related other VM so I know that works in my farm. It doesn't seem to work for this virtual machine. If I do not use the technology of cloning of link and simply turn the virtual machine in a model, I can turn a virtual machine stop... Any thoughts?

  Thank you

  The virtual machine has been turned on when you took the pictures?

  Open Snapshot Manager and check to see if there are little green play the symbols on the snapshots. If so, this means that the State of the RAM was saved and View manager cannot use snapshots with a State registered RAM.

  You will need to go back to the snapshot you want and repeat. If the virtual machine is turned on while you take the snapshot, then simply uncheck the box indicating that it will save a running state.

  Mike

• Issue in quick clone

  Hello
  
  I am facing incompatibility with perl versions
  
  This is the error
  
  Perl lib (5.10.0) version does not match the executable version (v5.8.8)
  
  It comes just ahead of the adclone.pl
  
  My OS in rhel5
  Perl - v
  gives 5.8.8
  
  EBS is 12.1.2 and 11.2.0.1 DB

  Hello

  usr

  You must use Perl shipped with OracleAS 10.1.3 according to (cloning Oracle Applications V12 with rapid Clone [406982.1 ID]) - you can also view these documents.

  Version of Perl (5.00503) lib does not match the executable version (5,006) [ID 391884.1]
  Common Perl installation problems and Solutions for the E-Business Suite 11i [ID 404055.1]

  Thank you
  Hussein

• Clone 10.2.0.5 agent issues

  Hello
  
  I followed the instructions of cloning manually agent on Linux hosts. Someone managed this? The error messages, it seems that cloning is not more, but maybe I'm missing something. Here's what I do.
  
  1. directory agent on a properly installed place tgz
  2. the scp of the agentless host, uncompress. All files kept acls, possessor and suid bits
  3 cd dir Yes/bin and command (per the oem documentation):
  . / runInstaller - clone - forceClone ORACLE_HOME_NAME ORACLE_HOME = / agent10gdir = agent10g5 - noconfig-silencer
  
  Output:
  
  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2010-05-10_12-30-08 PM. Please wait... [oem@host bin] $ Oracle Universal Installer, Production of the Version 10.2.0.5.0
  Copyright (C) 1999, 2009, Oracle. All rights reserved.
  
  Command line arguments '-clone ',' - forceClone' are not valid options. Type 'runInstaller - help' to the command line for instructions on the use of the appropriate command line.
  GRAVE: command line arguments '-clone ',' - forceClone' are not valid options. Type 'runInstaller - help' to the command line for instructions on the use of the appropriate command line.
  
  4. run the command:
  . / runInstaller-help
  
  Output:
  continue to launch Oracle Universal Installer from/tmp/OraInstall2010-05-10_12-31-11 PM. Please wait... [oem@host bin] $ Oracle Universal Installer, Production of the Version 10.2.0.5.0
  Copyright (C) 1999, 2009, Oracle. All rights reserved.
  
  Use:
  runInstaller [-options] [(<CommandLineVariable=Value>) *]
  
  Where options include:
  -oracle.crs < version crs > clusterware
  Version of installed Cluster ready services.
  
  -crsLocation < Path >
  Used only for cluster installation, specifies the path to the original location of crs. By specifying this overrides obtained from the central stock CRS.
  
  -invPtrLoc < full path of the oraInst.loc >
  UNIX only. To point to a different location of the inventory. The file orainst.loc contains:
  inventory_loc = < location of central inventory >
  inst_group = <>
  
  -jreLoc < location >
  Path where the Java runtime environment is installed. YES cannot run without it.
  
  logLevel - < level >
  To filter log messages that have a level of less than < level > priority. Valid options are: severe, warning, info, config, fine, finer, finest, basic, general, detailed, trace. Use of basic, General and detailed, trace is discouraged.
  
  -paramFile < file location >
  Specify the location of the oraparam.ini file that will be used by YES.
  
  -responsefile < Path >
  Specifies the response file and the path to use.
  
  -sourceLoc < location of the products.xml file >
  To specify the location of shiphome.
  
  -addLangs
  To add new languages to an already installed product.
  
  -addNode
  To add nodes to the installation.
  
  -attachHome
  To fix the homes in inventory YES.
  
  -cfs
  Indicates that the specified Oracle home is the (shared) cluster file system. This is required when '-local "is specified so that Oracle Universal install can save the House properly in the inventory.
  
  -clone
  To make a copy of the Oracle Home corresponds to its current environment.
  
  -debug
  To get YES debugging information.
  
  -Uninstall
  To uninstall operations.
  
  -detachHome
  To detach the YES inventory homes without removing the inventory within the Oracle home directory.
  
  -enableRollingUpgrade
  Used in the cluster environment, to allow the upgrade of a product on a subset of the nodes (on which the product has been installed).
  
  -executeSysPrereqs
  Run the system pre-checks and exit.
  
  -force
  Allowing installation in silent mode in a directory not empty.
  
  
  5. run the command:
  . / runInstaller - clone - force ORACLE_HOME = / agent10gdir ORACLE_HOME_NAME = agent10g5 - noconfig-silencer
  From Oracle Universal Installer...
  
  No verification requirements found in oraparam.ini, no prerequisite system controls will be carried out.
  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2010-05-10_12-32-50 PM. Please wait... [oem@host bin] $ Oracle Universal Installer, Production of the Version 10.2.0.5.0
  Copyright (C) 1999, 2009, Oracle. All rights reserved.
  
  Command line arguments '-clone ',' - force' are not valid options. Type 'runInstaller - help' to the command line for instructions on the use of the appropriate command line.
  GRAVE: command line arguments '-clone ',' - force' are not valid options. Type 'runInstaller - help' to the command line for instructions on the use of the appropriate command line.
  
  6 get frustrated
  
  7. run the command:
  . / runInstaller ORACLE_HOME_NAME ORACLE_HOME = / agent10gdir = agent10g5 - noconfig-silent - clone - force
  From Oracle Universal Installer...
  
  No verification requirements found in oraparam.ini, no prerequisite system controls will be carried out.
  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2010-05-10_12-34-31 PM. Please wait... [oem@host bin] $ Oracle Universal Installer, Production of the Version 10.2.0.5.0
  Copyright (C) 1999, 2009, Oracle. All rights reserved.
  
  You can find a log of this session to install to:
  /Home/OEM/oraInventory/logs/cloneActions2010-05-10_12-34-31PM.log
  
  [oem@host bin] $ cat /home/oem/oraInventory/logs/cloneActions2010-05-10_12-34-31PM.log
  NEWS: Environment Variables:
  
  INFO: ORACLE_HOME = /agent10gdir
  
  INFO: PATH = / agent10gdir/bin: / usr/kerberos/bin: / usr/local/bin: / bin: / usr/bin: / bin/oem/home
  
  INFO: CLASSPATH =
  
  INFO: Username:oem
  
  INFO: Setting variable 'ORACLE_HOME' ' / agent10gdir'. Has received the value of the command line.
  
  INFO: Definition of variable 'ORACLE_HOME_NAME' to 'agent10g5 '. Has received the value of the command line.
  
  INFO: Definition of variable 'PREREQ_CONFIG_LOCATION' ". The value of variable association received.
  
  INFO: Definition of variable 'FROM_LOCATION' ' / agent10gdir/inventory/ContentsXML/comps.xml'. The value from a block of code.
  
  INFO: config-context initialized
  
  NEWS: Get the location of the home directory of the user default inventory.
  
  
  INFO: Setting default inventory location: ' / home/oem/oraInventory.
  
  INFO: Inventory install them during initialization
  
  INFO: setting up install the inventory
  
  INFO: Install box control created with access level 1
  
  INFO: Cannot read the list of inventory homes.
  
  INFO: Oracle Universal Installer version is 10.2.0.5.0
  
  INFO: Definition of variable 'CLUSTER_NODES' ". The value from a block of code.
  INFO: Definition of variable 'REMOTE_NODES' ". The value from a block of code.
  INFO: The following components do not support the cloning:
  INFO: 10.2.0.5.0 Oracle Management Agent
  
  
  
  Thus, he worked for anyone? What operating system/version where do you use? Thank you!
  
  Jason Harris

  Hi Jason,

  The agent software? You mean the original zipped agent? It comes from a non - server WHO. But it's not much different with an agent of a CMS server except add some extras to the runinstaller command (see note 579156.1 steps to clone chained Management Agent).
  I don't see much in this step that might help you, sorry.

  RDP has nothing to do with Oracle. It is an acronym for HP Insight Rapid Deployment Pack and is just a way to install with the basic software (os) servers, configure and install additional software in an automated way. We used to install the servers and install and configure the Oracle Agent on a clients site.

  If you do so already create a new zip from a different source (if available) and give it a try again. Maybe something was not right in the source directory of the agent.

  Eric

• Clone Volume issue

  Hello

  I installed VMWare Fusion and the migration agent, but when I started the migration to 5% it failed with the message "BlockLevelVolumeCloneMgr: ". " CloneVolume: detected a write for cloning a volume error '

  
  

  I joined: Migration of information from media PC and printing scree of the migration agent.
  

  Please help.

  Hi all

  I tried another way in virtualizing my physical computer to the vcenter converter and then import it on new virtual machine VMWare fusion.

  Best regards

  SALL

• Pages - trying to link the issue to the paragraph of the answer

  Hi there: neophyte user Pages for businesses trying to link the issue of the survey to a paragraph "answering machine".  As an example...

  Question:

  What's your brown grass?  Yes No

  If the answer is Yes, then want to fill and print a paragraph explaining...

  Your grass is Brown, because you're not watering or you need phosphorus or whatever.  Here's what you need to know about this resolution.  etc, etc.

  Any suggestions on the Pages or other popular apps.

  V5.6.2 pages is not suitable for the use of processing of affairs where one expects it to be a clone of Microsoft Word - who is not. There is no content link intra-document, support forms or runtime macros that manipulate the content of the document when the interactive user input. Pages is not a web design tool.

• Help on upgrading 10.7.5 El captain in MS Office and other possible issues

  Hello!

  I have a Mac Book Pro December 2011, OS X 10.7.5. I struggled with the implementation of php and many other issues and have been repeatedly invited to improve my OS. As a newbie in CS, I frankly scared - it's the only computer I have, and I can't lose/break/brick/etc, because I won't be able to fix any serious problem at the moment, not until I know what's best. But I'm really tired of losing time because of low productivity, constant freezing and other issues; and also feel ashamed bothers people on forums like this one, only because I have an obsolete system and lack of appropriate knowledge (the latest is not shameful because I learn, but the first can be really annoying for people who help me).

  Please, help me with this question:

  (1) is it safe to upgrade directly to el Captain 10.7.5?

  (2) If Yes on first, what are the possible problems that may arise and what should I do to avoid problems?

  (3) should I reinstall MS Office to upgrade the OS? This is crucial for me because I found out that I have to buy new MS Office, as Microsoft staff informed me. This isn't really the best money for me at the moment.

  Thank you very much for your help and your understanding!

  -First clone your boot existing to another disk drive.

  http://nyacomputing.com/how-to-create-a-bootable-clone-of-your-Mac-hard-drive/

  -Consult the developer of your applications if they will work with El Capitan.  Some may require updates and some may simply not work, and you must buy an upgrade. A MS Office for Mac license will be valid when upgrading to El Capitan, if the version you have is compatible with El Capitan.

  -In EL Capitan Apple strengthened for some hardware will require drivers drivers updated signature. For some hardware updated drivers are not available.

• Paragon/Ghost: Create a bootable clone between the (hard drives of different sizes to)

  I was web-searching options of backup in the last days and want to settle on a solution of freeware Paragon or Ghost (I know that the latter meets the needs, but I wonder if the first can do with relative ease for a beginner). Here's the scenario:

  My current Toshiba Satellite A660 (PSAW3C-047017 model) running Windows 7 Professional 64-bit. The HARD disk is the disk HARD MK6465GSX from Toshiba (http://storage.toshiba.eu/cms/en/hdd/multimedia/product_detail.jsp?productid=341). I bought a small (500GB) Seagate Momentus XT, which has apparently Advanced Format. I guess the Toshiba HDD 512 bytes/sector, because nothing comes up in a search on the web for Advanced Format for this HARD drive.

  I would like the Momentus XT allows you to create a bootable to my Toshiba HDD clone. The Momentus XT will be in a pregnant that will interface to the portable computer via eSATA. After cloning for the Momentus XT, I would replace my Toshiba HDD in the laptop with the Momentus XT due to its superior performance. The Toshiba HDD becomes my HDD auxiliary (in the external case) for the cloning of the weekly. If nothing ever happens to the Momentus XT in the laptop, I can then take the Toshiba HDD out of the enclosure and put it in the laptop. However, this mode of use of the means I have to be able to clone initially Toshiba HDD Momentus XL, then clone in the other direction later.

  I read a lot about needing to be trendy, but not having alignment issues do not image, cloned, or formatted a hard drive before (except obey blindly support), I'm foggy on the understanding. Seagate announced their SmartAlign technology, but there is no corroboration on its effectiveness and no info about HARD drive models have it. Because Windows 7 is described as supporting the AF, I guess that many of the issues identified by SmartAlign are nonissues to me.

  My concern is that if there are other traps due to the corresponding HDD sizes and sectors that could create problems for the cloning process, both the Toshiba HDD for the Momentus XT and vice versa. Consequences (and solutions) I'm trawling for are the inability to create a clone bootable, the completeness and accessibility of the clone and align content makes this performance impact (with the exception of those to avoid due to the use of Windows 7).

  A friend I know that Ghost will properly manage the HARD disk and differences in size of the sector gracefully, avoiding the above consequences. I was wondering if freeware Paragon will handle this scenario as well. Paragon is free, but apart from the functional qualities, I would also consider ease of use in order to take a decision on the two.

  Thanks for any comment on the ability of Paragon freeware to manage this scenario, the comparison of usability of Paragon & Ghost for this scenario, and anything else you think is relevant in the choice between them for my scenario.

  Hello

  > Thanks for any comment on the ability of Paragon freeware to manage this scenario, the comparison of usability of Paragon & Ghost for this scenario, and anything else you think is relevant in the choice between them for my scenario.
  In my opinion, this question should be forwarded to the Paragon supports.
  http://www.Paragon-Software.com/support/
  Check the knowledge base or the forum of the community.

  From my point of view, you must first create a Toshiba Recovery disk.
  In this case, you are always secure you can set the laptop back to factory settings, even if the HARD drive was going to die or the system would begin to run crazy.

  I have used Ghost in the past in order to back up my files. I created an image of my two partitions bootable file and this race smoothly unfortunately cannot say on Paragon or compare both applications.

• Satellite A660 - format 500 GB HDD to make it bootable clone

  I have a Toshiba Satellite A660 PSAW3C-047017 running Windows 7 Professional 64 - bit.

  I bought a 500 GB Momentus XT in December so that I can clone (bootable clone, not recoverable image). I just bought and installed Norton Ghost 15, but he can't see the player, which is connected to the laptop via eSATA. Disk management says I need to initialize the disk. I can't find an explanation of what exactly the means of initialization. What is exactly?

  Various discussions of the forum say contradictory things about the effect of the end of initialization (if it destroys the data):

  http://superuser.com/questions/283930/will-initializing-disk-make-data-unrecoverable
  http://www.SevenForums.com/hardware-devices/29199-hard-drive-initialization-question.html
  http://answers.Yahoo.com/question/index?QID=20080214215647AAYFNGS

  Since this is a new HARD drive, I think that I don't have to worry about that?

  Choose the MBR (Master Boot Record) or GPT (GUID Partition Table)?

  Finally, maybe it's a bit specific Seagate for another thread, but I'll put it out there in case anyone can sound. I read that the Momentus XT has some built-in intelligence to prevent degrade them performance with the limits of partition alignment issues when Advanced Format is used. He also announced an integrated intelligence keep more frequently accessed content in the part of the SDS of the HARD drive. Will one of these to be "spoiled" by the init or the wrong partition style? What formatting, is there anything to be careful?

  > I just bought and installed Norton Ghost 15, but he can't see the player, which is connected to the laptop via eSATA. Disk management says I need to initialize the disk. I can't find an explanation of what exactly the means of initialization. What is exactly?

  You may need to add the SATA driver for the HARD disk.
  The laptop supports the SATA controller and the SATA driver files are part of the Intel Storage Manager.

• Re-cloning a full clone

  I have will get replacement OWC drives because of the chipsets issues and will need to transfer all my data for new readers.

  Both have multiple partitions, most with clones of the different versions of the OS systems on them. Of course, I can clone the most recent copy of the iMac directly, but my other clones (e.g. factory fresh clones of three different versions of the OS) would need to clone the clone of the old drive to the new drive.

  Can I do this while it is started on the iMac, or do I need to start in the old drive/clone to clone than to the new drive? It's using CarbonCopyCloner.

  bump

• Folder, permission issues, launch or directory? Help, please!

  Hi all

  I'll try to keep this long history of strategies to solve problem as brief as possible. MBP mid 2010 Yosemite running started glitching around Christmas (CPU, memory and requiring hard reboot followed by a freezing kernel panic) and I began research on what might be wrong. Makes backups (clone SuperDuper and TM BU). Make a disk bootable for El Capitan. Tried the usual suspects... check disk, disk repair, SMC reset, reset the NVRAM, etc.. Problem persisted. I tried clean of El Capitan and utility disk installation failed to go back and take down? disc after erasing. Bought a new SSD. SSD formatted and installed several times and several times there no shortly after or during the installation of El Capitan (gray screen with "no symbol" indicating no OS). Replacement internal SATA cable - that did the trick with the original hard disk installed with a clean install of El Capitan. Kept new SSD in attachment and clone of Yosemite BU SuperDuper copied on it (as she has MS Office - I have the product key). Can start from and access all of the SSD connected via USB, but some of the original problems (high CPU and memory) remained. In recovery mode, I have reset the directories for all users and administrator. I have improved the SSD to El Capitan and the problems continued. Console reads the questions with the lsd, mdworker, WindowServer and iconservicesagent (mostly). Tried to fix the permissions and cleaning of the caches using Onyx, which did fix some problems related to printers permissions. Need help, know where to go from here. Any help would be greatly appreciated!

  Thank you in advance,

  Pascal

  Kernel panics are most often due to problems of RAM.  But given that you've been through so many troubleshooting steps, it is difficult to know where things went wrong.

  For one thing, there is no clean install.  If you mean you erase and installed and persist in obtaining the kernel panics, he stresses more clearly material being the issue.  And since you have the Mac 2010, you will need the original installer disks to perform a test of expanded material.   If you have done this, the test reveals any problems, then you clearly have a RAM problem.   See my FAQ * about bad RAM:

  http://www.macmaps.com/BadRAM.html

  Otherwise, any error you get from the material testing, should be examined by an authorized technician.

  * Links to my pages give me an allowance.

• Closure of the Clones of models

  I use a Template and VI server to create several "clones" that allows me to perform several tasks in parallel.  The Clones are written as a stand-alone VI, with a stop button on the control panel until I push by program to stop the Clone.  If I create, for example, three clones, I'll get three before Clone 1 Clone 2 panels and 3 clone.

  When I go to close the project, I wonder if I want to save the created Clones.  The answer, of course, is always 'no '.  Is there a way to 'close' programmatically these Clones without saving them so I asked this question?  I'm happy to have the front panels are not visible - indeed, my routine to start the Clone has an option "Hide the front panel" and my routine to stop the Clone has an option "Close cover" - If either is set, the Clone of the front panel are not visible when the program terminates.  However, even in this case, the fence project asks me to save all the Clones.

  Another issue that could be related to "Unregistered Clones" - when the program and the Clones are stopped and I try to fill in the project, I get a message saying "the proposed closure will stop some current screws execution".  However, to the best of my knowledge, there is no screws running is there something that I am missing?  'Do something' to the farm/stop all that generated this message?

  I guess that there are the "arguments" (or maybe even 'evidence') on the best way to spawn asynchronous clones - using a model of VI (like me) and start to help run a VI, making the reentrant VI and it start by running a VI or using the asynchronous call start.  I don't know the relative merits of these different methods, but conceptually (think in terms of 'prove accuracy', explaining to others, maintenance, etc.), model VI method seems not 'wrong' to me.  In any case, it's the premise of my question.

  I have all the clones close to "" asking them to stop.  I have two chances to close their facades - I can choose to run them without having to open the front panel, or can choose to close the front before stopping them.  If I make one (or both) of these, I received both a message saying, I couldn't close the project without stopping a VI running (but there was no 'obviously' running VI) and asking me to save all the clones.

  The correct answer to my question was to be sure that the references used to open and close the clones has been closed, something that I had forgotten to do (I discovered and corrected this omission today).  It seems the answer to my question.

• 'Clone' of the project library (.lvlib)

  We have a study on sound localization - move us a speaker with a robotic arm, play sound through the speaker, ask our subjects to point a laser where they perceive the location of the sound and press a button.  We can also turn on LEDs and lasers, adjust sync settings, even to move the sound source.  The various tests are "programmed" by entries into an Excel workbook with columns for the timing, healthy situation, sound settings, etc.  In addition to the Excel workbook, we generate 3 output files - a header file XML that describes the configuration of the recording (analog and digital channel names and scales) and saves the settings of each trial as it is executed, an XML event which records all of the events of "point-in-time", such as Messages, status changes, or modifies the digital I/o, and a file of examples that contains N (usually 16) sampled analog and digital channels sampled at 1 kHz.  We control all of this a LabVIEW Real-time project, which also includes routines to study, manipulate and analyze data of output files.

  The project evolves (slowly) - we are currently at Version 2.0 (Version 1.x was developed in LabVIEW 7.0, this is the complete rewrite 2012/2014, "start from scratch and do it right, or at least better").  We are contemplating adding the ability to study the sounds delivered via stereo headphones (vary the volume from left to right or by adding a small time gap between channels) and calls this Version 2.1.

  To try and prevent "Version hell", we intend to do "backward compatibility" Versions - we will Add some new columns to the workbook Excel for new parameters in headphones, but put in place LabVIEW code to simply "do nothing" (with headphones) if he reads a Version 2.0 workbook where these parameters are lacking.  This allows us to code of Version 2.1 allows to make a Version 2.0 experience.

  We are faced with one of the problems are to know how read and analyze or manipulate data files resulting.  For example, the header file contains specific sets the version of the data, which are analyzed by the XML parser and converted directly into a Cluster of LabVIEW.  Thus a Version 2.0 file must be read by the code who "knows" a Cluster of Trial Version 2.0, whereas a 2.1 file needs a trial 2.1 Cluster.

  When I read the header file, the first thing I encounter is the Version number (2.0 or 2.1).  Knowing this, I could, in principle, use a Case statement to call a Version 2.0 or Version 2.1 analysis routine.  But I am trying to 'avoid a mess', and libraries in the project seems a good way to do so, if I understand how to use them properly.

  [For now, I have to say that I tried a little experiment: I have created a new project, built Library1 in a folder with a 'Hello' and 'Test' Library1, built the library 2 (inside the folder library 2) with 'Hello' and 'Test' (different) and called the high-level.]  Worked well.  I then "took a shortcut" and copied the folder Library1 (outside of LabVIEW) on the menaces3.  When I said that the project to add 3 library, I had a mess of conflicts, which I couldn't resolve.  And I "broke" LabVIEW - even after removing all the .lvlib and the .lvproj files, I couldn't create a project and make a folder to add (Snapshot) without a missing file error to appear.  I did the experiment using LabVIEW 2012 - this problem has affected not only LabVIEW 2012, but also 2013 LabVIEW and LabVIEW 2014, but not LabVIEW 2011.  I spoke with the support of OR, which are also puzzled.  I am currently working in a new virtual machine until I can get LabVIEW "repaired"].

  What I want to do is identify all Version-specific routines in my folder of analysis and include data in this case TypeDefs for the Version-specific parts.  I would then "wrap" all this in a project library Version 2.0.  The code "on the outside" would have its own copy of TypeDefs (she could use the "Latest Version", as external routines are supposed to be 'backward compatibility'.

  So here are my questions.

  1. Suppose that I restructured my project so that I have a record, both "Real" and "Virtual" (in the project) parsing, and it contains a subfolder called Version 2.0 that contains the Version-specific TypeDefs and most of parsing code.  Is there an easy way to transform the Version 2.0 to Version 2.0 Library folder so that when I call functions in this library, they use Version 2.0 of the TypeDefs of the library, regardless of the TypeDefs declared in the main routine?
  
  
• Assuming that I have a folder of Version 2.0 of work and the library, is there an easy way to "clone" to make a folder of Version 2.1 and the library?  If so, all I would need to do the "work" for Version 2.1 of the code would replace TypeDefs of Version 2.0 in the file of Version 2.1 with the "correct" TypeDefs, and (b) add any additional analysis code is required for the new features in the new Version.

I apologize for the long-winded nature of this issue.  I look for tutorials on libraries of the project (there are), but none covered this topic.  To pay for your patience, I am happy to write and submit to the OR for a future white paper on libraries of the project - which would speak?

Bob Schor

PS - Moderator - if it belongs to another Forum, feel free to move it.

On the money Bob!  Save under... Duplicate the hierarchy to the new location (requires that the new library offers a new name)

To convert a virtual folder to a lvlib just to create a new lvlib in the project and move the project members want in the new lvlib Project Explorer does the rest of the book nitty gritty on registration of the members of the lvlib with the new property information.  (You will be prompted to save the members when the composition is changed)

And Yes, it's the kind of mistake you don't do twice.  And, believe it or not, I had this type of issue used to justify not using projects! "they are too much hassle when you mud round in windows Explorer ' then I asked them if the never borrowed the car of their father and did not him tell you parked above on the next Street.  They now use projects.

• You need 2 TB 2nd hdd on Pavilion hpe h8 - 1380t so I can clone main drive. Problems?

  I need to spend my second hdd to a 2 TB drive, so I can clone main drive.  Are there compatibility issues, that I need to know?

  It should not be. A 2 TB drive is an option on this model. If it will not be the main disk where the OS is installed, then the only real problem in that you should have to run is to find an additional SATA cable.