Cloned new HDD for Pavilion 1210.uk does not start

Similar Questions

• HP Pavilion dv7t-3000 does not start

  My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674

  According to who, the error condition is: 'non-functional CPU.

  So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?

  Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.

• HP Pavilion p6-2054uk: HP Pavilion p6-2054uk does not start all of a sudden upward. Help, please.

  I hope someone can help here?

  I have a desktop HP Pavilion p6-2054uk (Windows 7 64 bit - i5, 3.00 Ghz - 6 GB of RAM) that I bought in 2012 and especially use of HP products.

  By starting my PC the other day, it will not start and crashes on the HP splash screen. When you press ESC, F10 and F1 and F8, it simply changes the screen to a black screen with 7 lines of text giving the details of my PC base on this subject. It should give me other optins at this stage, but does not work.

  The HP Pavilion p6-2054uk hard drive does not start even another hard drive OS I've tried from another computer with Windows 7 64 bit on it. Troubleshooting a few others, I even tried a fresh new hard drive in it with a new copy of Windows 7 64 bit to install into the CD Rom and it will not yet go through the HP start - that is abnormal screen since usually, it detects the Windows CD and install. Furthermore, fans in the PC work normal, as the eject the power of the PC CD ROM light is on too. I tried all the three available inside power cables and tried diferent nine cables sata/data and another monitor entry too, all to nothing done.

  The hard drive that was in the HP Pavilion p6-2054uk when he stopped to start up is fully accessible when placed in the other machine I have. Therefore, it is still operational.

  The notable thing only I did in the days before it were installing Adobe Creative Suite 6 but I do not think that it would cause a major problem like this, noting also that another hard disk OS (without Creative Suite 6 is installed) and a new facility wouldn't start either. Therefore, I am afraid a harware issue any.

  What could be going on here?

  Side for the second or 2 of optimism about the usual boot the PC normally makes noises, it looks like he died immediately after, suspended on the HP screen.

  Thanks in advance.

  R.

  Hi there @dougaljoe,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer does not start and it is indeed suspended at the HP logo even with a different hard disk (with configured operating system) installed. I'm happy to help you with this.

  I suggest that you perform all hardware diagnostics in the BIOS/UEFI. Please also refer to the following, as it covers a range of start-up problems, and if you follow the symptoms you experience should be useful. It includes information on diagnosis.  Computers HP - computer won't start (Windows 7)

  According to you it might just be something easily replaceable, or something more simple to set, or in a worst case something requiring maintenance. If the worst case rears its ugly head, then try a hotline. Please use the following http://www.hp.com/contacthp and create a folder for your question and call HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html If all goes well, he will not come to that, but it is preferable to have the information if necessary.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Pavilion G6-1b59wm does not start

  Nice day.. I have a G6 Pavilion that does not start when you push the power button. I tried it on battery only and with the power supply cord is plugged in. And yet nothing.

  Here's what I see: when the power supply cord is plugged in, the power supply next to the port light is white. I press the power button it flashes white momentarily (and it flashes F12). Nothing else happens. No other led lite, the screen remains black.

  Diagnosis steps followed:

  1. the battery was removed, and unplugged. Start button / stop for 30 seconds and reconnected. Nothing.

  2. battery removed and plugged into the wall. Start button / down stop and nothing.

  3 tried a different power cord, different battery... nothing

  4 removed boards from the RAM, button / Stop button... nothing

  5 deleted from the hard disk (RAM yet uninstalled), button / Stop button... nothing

  Any other suggestions?

  This should help you locate:

  http://WWW8.HP.com/us/en/store-finder/index.do

• Pavilion g6-1045ej: hp pavilion g6-1045ej does not start

  Hello.

  I use a HP Pavilion laptop 1045ej g6. The laptop is 4 years and 3 days ago, I replaced the cpu of i3 380 m to i7 640 m.

  After the repalcement of the laptop won't start, fans were whirring but the BIOS screen came. The Caps Lock key flashes at intervals of one, the wireless button is orange and that's all. Its been like that since.

  Any suggestions?, please help.

  Hi there @Mr_Potato.

  Let me welcome in the HP support community where you can ask questions, find solutions, and get help with problems you encounter. If my answer to solve your problem or answer your questions, please inform others that this answer was helpful by clicking on the accept button Solution.

  The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops. The number of flashes of the sequence is 1 blink. This means that the processor is not functional.

  

  Source: computer does not start and emits a LED or beep Code

  You can try to reinstall the CPU and check all connections first of all to see if maybe it just has not read correctly, as you said you just replace the CPU.

  Although you had mentioned, you have replaced the i3 - 380 m with an i7 - 640 m. I found the CPU that came with the notebook in the table for the previous generation Intel® processors. Then, I checked to see what is compatible. Please look at HP Pavilion g6-1045ej Notebook PC Maintenance and Service of Guide on page 1.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem. If you need assistance I will gladly do everything I can to help. If you want to say 'Thank you' to my effort to help, please click the 'thumbs up' to give me a Kudos.

  Have a great day!

• Pavilion dm4-1265dx does not start after Windows 7 logo

  My laptop does not start after the "Starting Windows" screen when I try to boot the operating system normally. When I try to run the repair mode from the start nothing happens... I get a blue background image and the pointer of the arrow, but no icons or windows appear.

  I tried the system diagnostic mode by pressing ESC when turning the laptop on and the hard drive test fails every time, showing the following results:

  Test Drive: 1
  INTELLIGENT control: passed
  DST short: failure

  Failure ID: 64RG79-5AP62V-XD6U2K-60RN03
  Product ID: XZ298UA #ABA

  Hard drive 1

  --------------------------------------------------------

  Test drive: FAILURE

  How should I proceed? The laptop is still under warranty, but it was purchased in the United States, and I now live in the Brazil.

  Hello

  You will need to replace the hard drive.

  HP should send you a new drive for free, but in your case is a little complicated as you mentioned it already. Please contact HP tell them about this situation. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

• HP Pavilion dv7-3067nr does not start

  My laptop does not start.  Screen remains blank.  All the lights are on. Numlock and caps lock will Flash twice.  I removed the battery, memory, HD and all the accessories.  same mistake.

  Thank you all for your response.  I solved the problem be to take out the battery for a month and let it sit.

• HP pavilion laptop computer does not start

  When I turn on my laptop it does not start. It goes to a blue screen that indicates it should be repaired. Help please

  Hello

  Error code 24 characters long drive Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the startup problem you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Pavilion dv7-1201ef does not start

  Pavilion dv7-1201ef

  Windows Vista Home Edition (French)

  Laptop does not start and displays a black screen. No way to access BIOS. Will start after 2 or 3 hours sometimes. Keyboard lights is flashing 1.

  Already tried reinitilization material. (5 times). No results. Clear the BIOS battery disconnected from everything. Once again no results.

  Looks like the motherboard or the CPU is shot.

  Can someone confirm please?

  Thanks in advance.

  PDB - is

  Please count the blink Code

  http://support.HP.com/us-en/document/c01443366

  I think that your card system have a problem

  A replacement cost more than €400

• My copy registered and checked for XP Pro SP3 does not start after changing the motherboard. Second problem is that I can't find my original install of XP Pro disc.

  After failing to find the source of reliable performance from my PC, I decided to bite the bullet and replace the motherboard, memory and the CPU. I installed a triple base 435 Athlon and a motherboard Gigabyte MA74GMT. Awarded PC again started the first time - but Windows will not, I get a number of options but none work - safe mode brings up several lines of messages on the partition of multi (0) disk (0) rdisk (0).

  A previous post suggested that a similar message meant some kind of malware but if I replace the old motherboard, processor and memory Windows works very well - in fact I use it now.

  Do I have an option but to reinstall Windows from a CD? Otherwise I have a problem - I can't find the installation discs for each piece of software except my Windows XP Pro! I do repair discs?

  Thanks for your help.

  Hi DaGeLi,

  · Provide us with the complete message you receive.

  Follow the methods below:

  Method 1:

  You were able to start the first time, you can try to boot to the last known good configuration and check the results. Link to get the procedure please refer to: how to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  Method 2:

  If it doesn't then you can follow the procedure from the below mentioned link. As you do not have the Windows XP CD you can follow the procedure if you have already installed on the computer to recovery console

  How do I recover from a corrupted registry that prevents Windows XP startup:http://support.microsoft.com/kb/307545

  Otherwise, you may need to make the boot floppies. See the link for the procedure below:

  http://support.Microsoft.com/kb/310994

  You can also contact the manufacturer of the system to get the Windows XP CD.

  For reference: how to fix a computer that does not start:http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think

• Pavilion dm3-2020eo does not start after change of RAM

  As the topic says my computer does not start after a change of the RAM.

  I've updated 2 x 2 GB 2 x 4 GB DDR3 SO - DIMM 204pins Rams. When I start the computer after installing new RAM does nothing, all I get is a black screen.

  According to the Spec computers, it should be able to take up to 8 GB of DDR3 RAM.

  Can someone help me?

  Thank you
  Leo

  Here's the key:

  We're working on two sockets and one does not at all.

  You have a bad memory module. It happens very rarely, but it's not impossible to get a new stick of bad memory. Get the replaced bad and I think you'll be fine.

• (Redirected) New keyboard for Dell Latitude e6400 does not

  I recently purchased 2 computers laptops dell latitude e6400, but both have the same problem, the keyboard does not. I'm even not go into the BIOS (F2) settings using the keyboard of the laptop. using a wired USB keyboard works very well. any suggestions?

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Satellite P200-1BA - HDD is faulty and Windows does not start

  Fujitsu HDD diagnostic tool returned a FAILURE result. Who should I contact to do what? Throw the HARD drive and buy another?

  The laptop was purchased in March last year and came up with this problem. It bothered me not far, given that the data written in these bad sectors and I have no problems. Because I accidentally deleted data, operating system written in these bad sectors and corrupts the data. Formatting the drive does not at all help, bad sectors are not detected by Windows Vista, only by the manufacturer's diagnostic tool. When asked to warranty on the manufacturer's website, it says it's expiration date is 10/09/10, but they do nothing about it, I have to contact the manufacturer of the system and tell him about this, because it's a VERY SPECIAL GUARANTEE: "serial number determined to be sold to a system with a single system warranty manufacturer and must be returned by the manufacturer of the system.

  Anyone any ideas? Or should I just buy another HARD drive. Thank you.

  PS: by the way, I'm not the only one having this problem for the same model of HARD drive.

  ´HI

  Just a question: why didn t contact you authorized service provider?

  I men if your laptop is still under warranty, you can get a new HARD drive for free. The ASP can order a new one and swap it out. All that s! :)

  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If your computer laptop isn't under warranty, you must buy a new HARD drive. But the s HDD are not that expensive.

• Pavilion laptop g7 does not start

  I have a HP Pavilion g7-1167dx Notebook PC running Windows 7 Home Premium.  When I turn it on, the LED only lights are LEDs of power (on the power switch and side) and the network LED on the F12 key.  I am not able to enter the diagnostics of material via the F2 key.  The fan is operating normally. It was produced before intermittently, but I wanted to just wait awhile and it would eventually start again.  When he finally is never returned, I disassembled carefully, according to the maintenance and care, guide (on an ESD protection adequate workstation) and gave it a good cleaning.  It was very dusty inside.  Unfortunately when I reassembled it, it still does not work.  The computer is a little more than two years. Product number: LW414UA #ABA

  I sent the motherboard to repair parts of computer out of Miami, Florida and they fixed it and returned.  I was told it was the video chip.  They charged $70.00.  With each shipment way I got it fixed for $90.00.   Hallelujah!  With their setting of the original motherboard, I didn't have to worry about problems of CMOS and "tattoeing" a new motherboard, which would have cost a lot more.

• Pavilion 500: PC does not start.

  I recently installed Windows 10 preview alongside Windows Enterprise 8.1, due to the fact that I could not install the latest version of Windows 10 preview 10041 I tried fiddling around with my boot partition, consiquently I can't boot my machine at all is to say does not provide BIOS/UEFI & all I get is a blank screen.  I tried to start my 8.1 Windows Pro CD & nothing, infact my PC does not detect the CD at all.  I also deleted my partition to restore HP 'yonks' (plonker!) there.  Peuvent some please help?  I have three partitions on my drive, there are W10, we have W8.1 Pro and the third has all my documents & photos etc.  My boot default OS saw W10.

  Thank you for the additional information.

  I carefully read your original post.  I think your best option is a system recovery.  Given that you have deleted the recovery partition, you must order the HP discs:

  http://support.HP.com/us-en/product/HP-Pavilion-500-000-desktop-PC-series/5358992/model/5403158/document/bph07143/

  So, I suggest to use a second hard drive to install Win 10.  It is the best way for dual boot.  When you have two OS' are on the same drive there is a lot of room for error. especially when installing a less stable version.  Win 10 is exactly that.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.