Pavilion laptop g7 does not start

Similar Questions

• HP pavilion laptop computer does not start

  When I turn on my laptop it does not start. It goes to a blue screen that indicates it should be repaired. Help please

  Hello

  Error code 24 characters long drive Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the startup problem you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• HP Pavilion laptop dv7 - does not start, CAPS/NumLock blinks

  After my own research Web, it seems that my laptop has a bad CPU. I'm writign this forum hoping to find confirmation of my diagnosis before I have spend money to solve the problem.

  When I try to start the laptop computer he hangs with a black screen, sounds as if it is trying to read something from the CD tray and flashes the LED lights by the SHIFT LOCK and numlock. According to the link I paste below, the CPU has stopped working. I want to be sure it's accurate before you buy a new processor. Could there be other issues, I need to address here?

  http://support.HP.com/us-en/document/c01443366

  Hi Steve2014,

  Welcome to the HP forum!

  Thanks for your post, I'm happy to help you.

  I understand that you get a black screen with no error message. The document you provided is right for the codes.  If the indicator light flashes only once, it indicates the CPU.  If you can run the diagnostics F2 at startup and launch the "Run - test, it will test the processor.»

• HP Pavilion dv7t-3000 does not start

  My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674

  According to who, the error condition is: 'non-functional CPU.

  So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?

  Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.

• Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

  So it told me to turn my phone off, then back on whilist cling the key F11. But when I do it my is laptop beep loud noise and rest on the logo hp, whilist is on this screen is says 'System recovery F11' in the lower left corner and does not move on the screen, how to fix this?

  Hi @Jaytee2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a blank screen or black at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a linkto computer does not start for Windows 7.
  
  Here is a documentthe performance of a Windows 7 system recovery.

  Do you have records system for this laptop?

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.

• Pavilion g6-1045ej: hp pavilion g6-1045ej does not start

  Hello.

  I use a HP Pavilion laptop 1045ej g6. The laptop is 4 years and 3 days ago, I replaced the cpu of i3 380 m to i7 640 m.

  After the repalcement of the laptop won't start, fans were whirring but the BIOS screen came. The Caps Lock key flashes at intervals of one, the wireless button is orange and that's all. Its been like that since.

  Any suggestions?, please help.

  Hi there @Mr_Potato.

  Let me welcome in the HP support community where you can ask questions, find solutions, and get help with problems you encounter. If my answer to solve your problem or answer your questions, please inform others that this answer was helpful by clicking on the accept button Solution.

  The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops. The number of flashes of the sequence is 1 blink. This means that the processor is not functional.

  

  Source: computer does not start and emits a LED or beep Code

  You can try to reinstall the CPU and check all connections first of all to see if maybe it just has not read correctly, as you said you just replace the CPU.

  Although you had mentioned, you have replaced the i3 - 380 m with an i7 - 640 m. I found the CPU that came with the notebook in the table for the previous generation Intel® processors. Then, I checked to see what is compatible. Please look at HP Pavilion g6-1045ej Notebook PC Maintenance and Service of Guide on page 1.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem. If you need assistance I will gladly do everything I can to help. If you want to say 'Thank you' to my effort to help, please click the 'thumbs up' to give me a Kudos.

  Have a great day!

• Pavilion dv7-1201ef does not start

  Pavilion dv7-1201ef

  Windows Vista Home Edition (French)

  Laptop does not start and displays a black screen. No way to access BIOS. Will start after 2 or 3 hours sometimes. Keyboard lights is flashing 1.

  Already tried reinitilization material. (5 times). No results. Clear the BIOS battery disconnected from everything. Once again no results.

  Looks like the motherboard or the CPU is shot.

  Can someone confirm please?

  Thanks in advance.

  PDB - is

  Please count the blink Code

  http://support.HP.com/us-en/document/c01443366

  I think that your card system have a problem

  A replacement cost more than €400

• HP Pavilion dv7-3067nr does not start

  My laptop does not start.  Screen remains blank.  All the lights are on. Numlock and caps lock will Flash twice.  I removed the battery, memory, HD and all the accessories.  same mistake.

  Thank you all for your response.  I solved the problem be to take out the battery for a month and let it sit.

• Portege R100 laptop computer does not start after a while without food

  Hello

  Well there is some time, I bought a beautiful used R100 - a laptop Toshiba in passing - but now, she has developed an annoying problem. Whenever it disconnect the laptop from the power supply for more than 2 hours about (don't know if this is not longer) I can't begin the R100, even if the battery indicator is green. After pressing the powerbutton the power led lights in green, and nothing happens. The "solution" to this problem is to give the R100 some time in this 'turned on' - State and after 15 minutes, I am able to start the computer (turn market again).

  I think that this could be a problem with a battery on the motherboard that is at its limits and needs time to gather enough power to start the computer.

  I hope you can help me identify the problem with my beloved laptop :)

  Yours,

  Tobias

  p.s. I have more or less need to identify the problem and some tips how to solve - the pleasure with the surgery will be from me :)

  p.p.s. Unlike the problem of the M400 further down, I've won if the beginning focused on the hard disk to Flash. In my case the R100 does not give a glance if it does not start. - And as a reference to the other post: "Hmm, I don't remember of the R100 fan not have it at all" * huggs its r100 * "."
  And I tried unplugging all the bits of the laptop and removed the battery, waited 15 minutes and tried to turn it on. the only way to obtain the departure of r100 is the method described above.

  You have an additional RAM installed?

  Maybe you need to re-seat, or it has a intermittent or heat associated with problem.

• Pavilion G6-1b59wm does not start

  Nice day.. I have a G6 Pavilion that does not start when you push the power button. I tried it on battery only and with the power supply cord is plugged in. And yet nothing.

  Here's what I see: when the power supply cord is plugged in, the power supply next to the port light is white. I press the power button it flashes white momentarily (and it flashes F12). Nothing else happens. No other led lite, the screen remains black.

  Diagnosis steps followed:

  1. the battery was removed, and unplugged. Start button / stop for 30 seconds and reconnected. Nothing.

  2. battery removed and plugged into the wall. Start button / down stop and nothing.

  3 tried a different power cord, different battery... nothing

  4 removed boards from the RAM, button / Stop button... nothing

  5 deleted from the hard disk (RAM yet uninstalled), button / Stop button... nothing

  Any other suggestions?

  This should help you locate:

  http://WWW8.HP.com/us/en/store-finder/index.do

• HP Pavilion p6-2054uk: HP Pavilion p6-2054uk does not start all of a sudden upward. Help, please.

  I hope someone can help here?

  I have a desktop HP Pavilion p6-2054uk (Windows 7 64 bit - i5, 3.00 Ghz - 6 GB of RAM) that I bought in 2012 and especially use of HP products.

  By starting my PC the other day, it will not start and crashes on the HP splash screen. When you press ESC, F10 and F1 and F8, it simply changes the screen to a black screen with 7 lines of text giving the details of my PC base on this subject. It should give me other optins at this stage, but does not work.

  The HP Pavilion p6-2054uk hard drive does not start even another hard drive OS I've tried from another computer with Windows 7 64 bit on it. Troubleshooting a few others, I even tried a fresh new hard drive in it with a new copy of Windows 7 64 bit to install into the CD Rom and it will not yet go through the HP start - that is abnormal screen since usually, it detects the Windows CD and install. Furthermore, fans in the PC work normal, as the eject the power of the PC CD ROM light is on too. I tried all the three available inside power cables and tried diferent nine cables sata/data and another monitor entry too, all to nothing done.

  The hard drive that was in the HP Pavilion p6-2054uk when he stopped to start up is fully accessible when placed in the other machine I have. Therefore, it is still operational.

  The notable thing only I did in the days before it were installing Adobe Creative Suite 6 but I do not think that it would cause a major problem like this, noting also that another hard disk OS (without Creative Suite 6 is installed) and a new facility wouldn't start either. Therefore, I am afraid a harware issue any.

  What could be going on here?

  Side for the second or 2 of optimism about the usual boot the PC normally makes noises, it looks like he died immediately after, suspended on the HP screen.

  Thanks in advance.

  R.

  Hi there @dougaljoe,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer does not start and it is indeed suspended at the HP logo even with a different hard disk (with configured operating system) installed. I'm happy to help you with this.

  I suggest that you perform all hardware diagnostics in the BIOS/UEFI. Please also refer to the following, as it covers a range of start-up problems, and if you follow the symptoms you experience should be useful. It includes information on diagnosis.  Computers HP - computer won't start (Windows 7)

  According to you it might just be something easily replaceable, or something more simple to set, or in a worst case something requiring maintenance. If the worst case rears its ugly head, then try a hotline. Please use the following http://www.hp.com/contacthp and create a folder for your question and call HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html If all goes well, he will not come to that, but it is preferable to have the information if necessary.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Mini laptop of HP 1000: mini windows laptop computer does not start

  My mini laptop from HP is saying windows has not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can try to repay this file by starting windows setup installation CD using the original.

  Hi there @kgoen81

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you receive a message from a missing file, and that your system does not start. I'm happy to help you.

  First, I recommend that make you an external backup of data on the hard drive. There are several ways you can try to do that, but here is a page with a few possibilities:

  How to recover data from the hard drive to a laptop dead - eHow.com

  Also, please post the complete product and the operating system running on your laptop. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  For now I'll assume you have windows 8.

  Computer won't start (Windows 8)

  You can also visit this page, and in particular you want to go with the automatic repair options. I would try before using a full system recovery to an original image, on the previous page I linked.

  System - Boot of Windows 8 recovery options - eightforums.com

  I hope this helps.

• Pavilion dm4-1265dx does not start after Windows 7 logo

  My laptop does not start after the "Starting Windows" screen when I try to boot the operating system normally. When I try to run the repair mode from the start nothing happens... I get a blue background image and the pointer of the arrow, but no icons or windows appear.

  I tried the system diagnostic mode by pressing ESC when turning the laptop on and the hard drive test fails every time, showing the following results:

  Test Drive: 1
  INTELLIGENT control: passed
  DST short: failure

  Failure ID: 64RG79-5AP62V-XD6U2K-60RN03
  Product ID: XZ298UA #ABA

  Hard drive 1

  --------------------------------------------------------

  Test drive: FAILURE

  How should I proceed? The laptop is still under warranty, but it was purchased in the United States, and I now live in the Brazil.

  Hello

  You will need to replace the hard drive.

  HP should send you a new drive for free, but in your case is a little complicated as you mentioned it already. Please contact HP tell them about this situation. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

• Pavilion dm3-2020eo does not start after change of RAM

  As the topic says my computer does not start after a change of the RAM.

  I've updated 2 x 2 GB 2 x 4 GB DDR3 SO - DIMM 204pins Rams. When I start the computer after installing new RAM does nothing, all I get is a black screen.

  According to the Spec computers, it should be able to take up to 8 GB of DDR3 RAM.

  Can someone help me?

  Thank you
  Leo

  Here's the key:

  We're working on two sockets and one does not at all.

  You have a bad memory module. It happens very rarely, but it's not impossible to get a new stick of bad memory. Get the replaced bad and I think you'll be fine.

• HP Pavilion dv7-4065dx does not start with continuous flashing capslock

  Hello

  I have a HP Pavilion dv7-4065dx laptop with Windows 7 64 bit that won't start or go to the Bios screen.  When the laptop is turned on, you hear the fan from the system start, start button / stop brighter lights and the caps lock button starts to Flash continuously once every three to four seconds.  The activity of the disc is also light on but with no flashing red.  No changes have been made to the laptop and it worked perfectly well a few hours earlier.  I tried the hard reset of the computer and the reinstallation of the memory cards, but the laptop would be still not start.  Any help to determine what the problem is with the computer would be greatly appreciated.  Thank you.

  HP Pavilion dv7-4065dx

  Product # WQ861UA #ABA

  It does not appear that a hardware problem has occurred.
  
  After reviewing the document for the blink code, it seems that the processor does not have.
  http://goo.GL/ipoGs
  
  A defective processor can be repaired by a local PC store, but I highly recommend you contact the HP support by phone to see what options are available. HP repair center would be able to identify the appropriate components that will need to be replaced in the rare case that the test gave flashing evil code.
  The number for the United States and the Canada is 1-800-474-6836.