Pavilion dv7-1201ef does not start

Similar Questions

• HP Pavilion dv7-3067nr does not start

  My laptop does not start.  Screen remains blank.  All the lights are on. Numlock and caps lock will Flash twice.  I removed the battery, memory, HD and all the accessories.  same mistake.

  Thank you all for your response.  I solved the problem be to take out the battery for a month and let it sit.

• HP Pavilion dv7-4065dx does not start with continuous flashing capslock

  Hello

  I have a HP Pavilion dv7-4065dx laptop with Windows 7 64 bit that won't start or go to the Bios screen.  When the laptop is turned on, you hear the fan from the system start, start button / stop brighter lights and the caps lock button starts to Flash continuously once every three to four seconds.  The activity of the disc is also light on but with no flashing red.  No changes have been made to the laptop and it worked perfectly well a few hours earlier.  I tried the hard reset of the computer and the reinstallation of the memory cards, but the laptop would be still not start.  Any help to determine what the problem is with the computer would be greatly appreciated.  Thank you.

  HP Pavilion dv7-4065dx

  Product # WQ861UA #ABA

  It does not appear that a hardware problem has occurred.
  
  After reviewing the document for the blink code, it seems that the processor does not have.
  http://goo.GL/ipoGs
  
  A defective processor can be repaired by a local PC store, but I highly recommend you contact the HP support by phone to see what options are available. HP repair center would be able to identify the appropriate components that will need to be replaced in the rare case that the test gave flashing evil code.
  The number for the United States and the Canada is 1-800-474-6836.

• HP Pavilion dv7t-3000 does not start

  My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674

  According to who, the error condition is: 'non-functional CPU.

  So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?

  Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.

• DV7-1232NR does not start

  DV7-1232NR does not start. The lights above the keyboard, the dvd player makes a bit of noise, then eventually the lights Verr Num and caplock do a slow blink continuously. As I understand it, flashing for default codes flashing one to six times, and then exit.

  Hello

  As you have no doubt already concluded, it would look like a significant failure of hardware, in particular given the fact that there was no change when the memory has been removed completely.  Unfortunately, the most likely component is the video chip which really means a new motherboard.

  The only other possibility might be interesting to try is to remove the module WLAN (Page 51), leave the battery and try to start Notepad on the entire sector.

  Kind regards

  DP - K

• My pavilion dv7-4051 does not illuminate

  I have a pavilion dv7-4051 and I left ny computer on and it went into sleep mode and now whenever I try to turn it on, but I'm not getting a screen .What can I do

  Hi mzscorpio,

  I understand that it does not start after you perform a hard reset or on battery alone.

  The adapter works?

  You see all the lights are shining. or blink?

  You hear any beeps?

  Have you tried a different outlet?

  Do you get a blank black screen with or without errors?

• Pavilion G6-1b59wm does not start

  Nice day.. I have a G6 Pavilion that does not start when you push the power button. I tried it on battery only and with the power supply cord is plugged in. And yet nothing.

  Here's what I see: when the power supply cord is plugged in, the power supply next to the port light is white. I press the power button it flashes white momentarily (and it flashes F12). Nothing else happens. No other led lite, the screen remains black.

  Diagnosis steps followed:

  1. the battery was removed, and unplugged. Start button / stop for 30 seconds and reconnected. Nothing.

  2. battery removed and plugged into the wall. Start button / down stop and nothing.

  3 tried a different power cord, different battery... nothing

  4 removed boards from the RAM, button / Stop button... nothing

  5 deleted from the hard disk (RAM yet uninstalled), button / Stop button... nothing

  Any other suggestions?

  This should help you locate:

  http://WWW8.HP.com/us/en/store-finder/index.do

• HP Pavilion p6-2054uk: HP Pavilion p6-2054uk does not start all of a sudden upward. Help, please.

  I hope someone can help here?

  I have a desktop HP Pavilion p6-2054uk (Windows 7 64 bit - i5, 3.00 Ghz - 6 GB of RAM) that I bought in 2012 and especially use of HP products.

  By starting my PC the other day, it will not start and crashes on the HP splash screen. When you press ESC, F10 and F1 and F8, it simply changes the screen to a black screen with 7 lines of text giving the details of my PC base on this subject. It should give me other optins at this stage, but does not work.

  The HP Pavilion p6-2054uk hard drive does not start even another hard drive OS I've tried from another computer with Windows 7 64 bit on it. Troubleshooting a few others, I even tried a fresh new hard drive in it with a new copy of Windows 7 64 bit to install into the CD Rom and it will not yet go through the HP start - that is abnormal screen since usually, it detects the Windows CD and install. Furthermore, fans in the PC work normal, as the eject the power of the PC CD ROM light is on too. I tried all the three available inside power cables and tried diferent nine cables sata/data and another monitor entry too, all to nothing done.

  The hard drive that was in the HP Pavilion p6-2054uk when he stopped to start up is fully accessible when placed in the other machine I have. Therefore, it is still operational.

  The notable thing only I did in the days before it were installing Adobe Creative Suite 6 but I do not think that it would cause a major problem like this, noting also that another hard disk OS (without Creative Suite 6 is installed) and a new facility wouldn't start either. Therefore, I am afraid a harware issue any.

  What could be going on here?

  Side for the second or 2 of optimism about the usual boot the PC normally makes noises, it looks like he died immediately after, suspended on the HP screen.

  Thanks in advance.

  R.

  Hi there @dougaljoe,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer does not start and it is indeed suspended at the HP logo even with a different hard disk (with configured operating system) installed. I'm happy to help you with this.

  I suggest that you perform all hardware diagnostics in the BIOS/UEFI. Please also refer to the following, as it covers a range of start-up problems, and if you follow the symptoms you experience should be useful. It includes information on diagnosis.  Computers HP - computer won't start (Windows 7)

  According to you it might just be something easily replaceable, or something more simple to set, or in a worst case something requiring maintenance. If the worst case rears its ugly head, then try a hotline. Please use the following http://www.hp.com/contacthp and create a folder for your question and call HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html If all goes well, he will not come to that, but it is preferable to have the information if necessary.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Pavilion g6-1045ej: hp pavilion g6-1045ej does not start

  Hello.

  I use a HP Pavilion laptop 1045ej g6. The laptop is 4 years and 3 days ago, I replaced the cpu of i3 380 m to i7 640 m.

  After the repalcement of the laptop won't start, fans were whirring but the BIOS screen came. The Caps Lock key flashes at intervals of one, the wireless button is orange and that's all. Its been like that since.

  Any suggestions?, please help.

  Hi there @Mr_Potato.

  Let me welcome in the HP support community where you can ask questions, find solutions, and get help with problems you encounter. If my answer to solve your problem or answer your questions, please inform others that this answer was helpful by clicking on the accept button Solution.

  The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops. The number of flashes of the sequence is 1 blink. This means that the processor is not functional.

  

  Source: computer does not start and emits a LED or beep Code

  You can try to reinstall the CPU and check all connections first of all to see if maybe it just has not read correctly, as you said you just replace the CPU.

  Although you had mentioned, you have replaced the i3 - 380 m with an i7 - 640 m. I found the CPU that came with the notebook in the table for the previous generation Intel® processors. Then, I checked to see what is compatible. Please look at HP Pavilion g6-1045ej Notebook PC Maintenance and Service of Guide on page 1.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem. If you need assistance I will gladly do everything I can to help. If you want to say 'Thank you' to my effort to help, please click the 'thumbs up' to give me a Kudos.

  Have a great day!

• HP DV7-7259nr does not start after the BIOS update

  Hello

  I have a problem with my HP DV7-7259nr laptop, WIN8 running: it does not start after tune recommended to update BIOS and drivers.

  It downloaded all the drivers and started installing at one time, he asked for a reboot, click OK and the BIOS update has begun to load. The process ended successfully and after the reboot that my laptop wouldn't start; everything is black and the cooler is runing.

  I tried:

  -battery disconnected and power - button Power - plugged power again-> NOTHING

  -Windows key + B + Power button--> nothing

  Please help as this is the laptop I use daily in my work.

  Thank you

  If you install the electro mechanical original hard drive in it starts?

  If it has been delivered with a SSD?

  The specifications indicate that an electromechanical drive was part of the specification.

  

  This is where lies the UEFI environment. It is actually on the hard drive.

• mute button volume and area of scrolling on the Pavilion dv7-3039ez does not

  Hello

  the volume button mute on my laptop dv7-3039ez does not, fortunately, it is on and not on mute.  Someone had a similar problem?

  Thanks a lot on how to unlock this button.

  Hello

  Shut down the PC, remove the AC adapter and then remove the battery.  Now, hold the power button down for a good 30 seconds.  Replace the battery, connect the power adapter and start the PC.

  Best wishes

  DP - K

• MY hp pavilion dv7 - 1247cl will not start until it say BOOTMGR is missing.

  Original title: I have a laptop hp pavilion dv7 - 1247cl which cannot start it say BOOTMGR is missing, can you help me please?

  I WAS ABOUT TO ERASE THE DATA AND THE LAPTOP WAS DISCONNECTED SO NOW CANNOT START UP

  Hello

   

  1. what operating system is installed on the computer?

  2. What is the full error message?

  3. using a program to erase data?

  4. have you already tried booting in Safe Mode?

  See the following article:

  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»

  http://support.Microsoft.com/kb/2622803

• HP pavilion laptop computer does not start

  When I turn on my laptop it does not start. It goes to a blue screen that indicates it should be repaired. Help please

  Hello

  Error code 24 characters long drive Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the startup problem you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Pavilion dm3-2020eo does not start after change of RAM

  As the topic says my computer does not start after a change of the RAM.

  I've updated 2 x 2 GB 2 x 4 GB DDR3 SO - DIMM 204pins Rams. When I start the computer after installing new RAM does nothing, all I get is a black screen.

  According to the Spec computers, it should be able to take up to 8 GB of DDR3 RAM.

  Can someone help me?

  Thank you
  Leo

  Here's the key:

  We're working on two sockets and one does not at all.

  You have a bad memory module. It happens very rarely, but it's not impossible to get a new stick of bad memory. Get the replaced bad and I think you'll be fine.

• Pavilion dm4-1265dx does not start after Windows 7 logo

  My laptop does not start after the "Starting Windows" screen when I try to boot the operating system normally. When I try to run the repair mode from the start nothing happens... I get a blue background image and the pointer of the arrow, but no icons or windows appear.

  I tried the system diagnostic mode by pressing ESC when turning the laptop on and the hard drive test fails every time, showing the following results:

  Test Drive: 1
  INTELLIGENT control: passed
  DST short: failure

  Failure ID: 64RG79-5AP62V-XD6U2K-60RN03
  Product ID: XZ298UA #ABA

  Hard drive 1

  --------------------------------------------------------

  Test drive: FAILURE

  How should I proceed? The laptop is still under warranty, but it was purchased in the United States, and I now live in the Brazil.

  Hello

  You will need to replace the hard drive.

  HP should send you a new drive for free, but in your case is a little complicated as you mentioned it already. Please contact HP tell them about this situation. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide