Clusters of indexing that are different sizes

Similar Questions

• First slide and following slides are different sizes at the launch of the server web file .swf

  We use CP5.5, and a .cptx file has been published in .swf. When played locally, he plays very well. However, during the launch of our server web, the first slide is displayed correctly, but all the following slides are huge on the screen and playback controls and half of the screen are not available. I tried to copy all the slides in a new project and publication, same problem. I also deleted on all ppt slides and not republished, no chance. I can resize the project but the difference in size of screen between the first slide and remains of slides, even when I delete the first slide is displayed differently. When I erase it, the first new slide has the problem. Again, the issue is seen only when the .swf is launched from our web server.

  Are there widgets on these first slides?

  You mention that you launch the SWF from your Web site.  He launched you via the HTM files and JS Captivate also publishes?

• check a result using lines that are different to the result

  Hello

  If anyone can help, I have Writer's block!

  I created a VI to create lines of limit for a test.  The VI creates a limit minimum and MAXIMUM by a user entered a frequency, the minimum and maximum limits by using a table.  The example I have is:

  Frequency Min Max

  2 MHz 0-10

  3 0-10 MHz

  3 MHz 0-12

  4 MHz 0-12

  This creates a line on my chart XY.

  When the test has been done, I want the result to check for stored limits.  So far I've posted online time result and limits on the XY graph, but I have trouble controlling the result that the table of results is different.  The results of the example that I have are:

  Result of frequency

  1 MHz - 9

  1.5 MHz - 11

  2 MHz - 12

  2.5 MHz - 11

  3 MHz - 12

  3.5 MHz - 13

  4 MHz - 13

  So in order to visually check the result I skip the first 2 frequencies and check others.  Y at - it a simple way to interpolate the berries to compare or will I have to wrap around the test frequency checking to check the limit or not.  An idea that I had been to calculate the increase in frequency of test and then recreated the table row limit to match the table of results.

  Any help would be appreciated!

  Try this it does all of the verification graphic design limit and anything that you want I think.

• What to do to be able to use the same files on two PCs that are different. ??

  I need to say that the files are linked, given that Dreamweaver writes the internal code for each file to each PC?

  What should I do?  The computers are NOT on a network.

  I hope that I have clearly to my question.

  See you soon,.

  Dreamweaver101.1

  Well, it's stretching to the requirements to license a bit, but they can certainly connect to the remote site, download files, edit on their local box and download them again.  But to avoid version control issues, you must not work on these files at all during this period.  Also, you should have up-synchronized files upwards on the site before they start to work and then downsynch after their completion.

  Who help me?

• Hello! What will happen to the bookmarks that are different from one computer to another? the Sync feature will be mixed together, or those on the 1st computer prevail?...

  Add the sync - mixed after its done?

  Hello!

  If you choose to synchronize the bookmarks that all of them will be put together and pushed across devices.

  Let me know if you need further clarification.

• How can I correct index entries that are incorrect?

  I visited Nortons support after you install Norton 2010 because it wouldn't let me open my control panel. They ran a CHKDSK on my computer and it came with

  Index entry InkObj.dll.mui in index $130 file 77 is incorrect and various other index that are incorrect.

  Norton support says that I had these problems until I could go further with Norton.

  Any ideas?

  Hello

  Have you run a chkdsk/r to repair problems? Or just the chkdsk standard to detect problems? The first to be performed from a command prompt high and, such that it will be impossible to lock the drive, have to be scheduled to run on a system reboot.

  At a high command prompt, click Start and type CMD. Right click on the menu entry that appears and choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, run:

  CHKDSK c: /r

  Press and follow the instructions.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Find indexes in the schema that are not used

  Hello
  Anyone know an easy way to SQL or EM to find all indexes that are not used (not accessed) in a schema?
  Greetings
  
  Published by: user552215 on January 26, 2012 04:15

  Salvation;

  Please see:

  Identify unused indexes [ID 144070.1]
  Identify unused indexes with the ALTER INDEX TRACKING controls [ID 136642.1]

  Respect of
  HELIOS

• Width of page is to different sizes of sovereign (photos)

  Dear users of Muse,

  I have a site and when I click from one page to the other Web sites jumping from left to right because of a rule different widt.

  

  As you can see there are different sizes and it is very annoying because the site left-wing past right can someone help me with this one?

  I'm Dutch I'm sorry for my English.

  Thank you fellow musers!

  Hi Niels,

  Have you noticed the scroll down bar http://prntscr.com/3q7cvy ?

  You can scroll to the left and see if that aligns the rule properly on all pages.

  - Abhishek Maurya

• After I restarted the 2003 server, I get a message on two of my workstations the present on this computer and the network are different

  After you restart the Server 2003 due to a storm, I now get a message on two of my workstations that are different from the current time on this computer and the network

  Hello

  This question would fit better in Windows Server Instances.

• BlackBerry Smartphones unwanted messages that are constantly appearing in the SMS

  I have a new BB 8830 and I get the same message again and again in my SMS Inbox. It reads:

  INFUSION: 0x1041c54: free GSM: stop automatically / / then boot to set of characters that are different every time.

  It says it stops automatically, but it obviosuly haat ' t. I contacted Sprint of support that was a total waste of time. Any help would be appreciated to even understand what causes this message I get around 30-40 a day, even at 1:00, which is really annoying because I have to have my phone 24/7

  Thank you

  Well, it seems, after much research, that there is a problem with the internet messaging system. 9114 indicates it is a yahoo account. As this is a new phone number for me and I had not set up a personal email yet, I can only assume it's a wedge of the former owner of phone number. Once I created my own Yahoo account with the phone via the email service blackberry internet, it must have overwirtten settings and now I have not received a single message since.

  What I gethered you can also go online for Manager messages and to 'block' sprint of this number, although I can not do because it is a phone company and we have no access to the account manager system

  I hope this helps people with the same problem

• With the help of Photoshop 6 How to sting a variety of photos together as one? They are different images won't work so not on photomerge

  Using SP6 I want to manually assemble a variety of different photos. When I tried photomerge no merged at all as I expected. Some of the photos are different sizes at the moment and it will be a mixture of portrait and landscape photos planned assemble as if it was a photo

  You can size for a particular tile size and hide this aspect ratio and have them.  It will look like more to tiled photos one image.  Its easy to do...  http://www.mouseprints.NET/old/DPR/PasteImageRoll.jsx is the script and its operation is here http://www.mouseprints.net/old/dpr/PasteImageRoll.html

  Ther are bugs in CC 2015 scripting. I patched to run cc 2015 but there are too many questions in 2015 CC for general use. I always use CC 2014

• changing of different size blocks to a single standard for each

  Perhaps the question raised once zillion, but one of my students asked me if it is possible to make the same size of different blocks that have different sizes? right kind of tricky, no? I must admit that I have to give my tongue to the cat. ? Any idea?  script? Thank you very much

  If you want to place images in CS4 or Cs5 you can do it in blocks.

  http://help.Adobe.com/en_US/InDesign/6.0/WS8882A67C-50CF-4825-8129-B4B051398F71a.html

  If you have CS3, you can do it in several graphic blocks of drawing at the same size, then use file > place and select the images to import, use Alt (Option) click to place the pictures in the frames.

  If you have already placed all the images, then you can resize an image to the size you want, including the dimensions of the graphic image and the introduction and scale the image in the image.

  Select all the other images in the graphics, and then use the object > transform > transform sequence again individually

• 'For' loop with a different number of iterations. Second, the auto-indexation of the tables with different sizes is done. It can affect the performance of the Vi?

  Hello

  I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do.

  Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be different in the different phases of the execution of the program (the size will equal the number of measures).

  My question is: the auto-indexation of the tables with different sizes will affect the performance of the program? I think it slows down my Vi...

  Thank you very much.

  My first thought is that the compiler to the LabVIEW actually removes the Matlab node because the outputs are not used.  Once you son upward, LabVIEW must then call Matlab and wait for it to run.  I know from experience, the call of Matlab to run the script is SLOW.  I also recommend to do the math in native LabVIEW.

• I have a LOT of different Indesign CS6 documents that are field guides, and I would be able to export only the names of species (bold italic)

  Hello

  I'd appreciate any help I can get.  I have a LOT of different Indesign CS6 documents that are field guides, and I would be able to export only the species names (in bold italics) of documents so that I can put in excellent to make a comparison and produce a comprehensive list.  There are several areas of text for each page/species.  The species name is in a single text box, so it is possible to somehow only the bold italics to export a document?  I have a bad feeling, but I thought I'd ask anyway. Thanks in advance for your time and interest.

  Maggie

  Also, sorry if my original question has not obtained the Chief... I'm new to this forum.

  It would certainly be a job for a written custom script. Without scripts, I might consider using the Index feature in InDesign. Indexing is manual work very well.

• Are there versions slightly different sizes of the standard Multiplugin for Cs5?

  A few days ago has posted a request for a list of the correct filters 64 bits for 64-bit photoshop Cs5 I had mixed a few filters with the standard. Noel had wanted to send me a list of filters for the 64 and 32-bit versions, so with the help of this list, I have carefully considered each filter keeping only those who was identical. It's simple, except in the case of the standard Multiplugin in which mine was very slightly larger than that of the list.

  I wonder if there may be versions slightly different dimensions of the standard Multiplugin which are all for 64-bit photoshop Cs5 and if this plugin is only actually found in 64-bit programs, so it must be OK?

  Thank you very much!

  The Photoshop dot releases have updated the standard multiplugin, and those who have different sizes.