CMD prompt does not work!

Similar Questions

• system files and command prompt does not work

  For the last two weeks, I'm having a nightmare. I disabled system restore and when I turned it on again every thing had stoped working (microsoft word and works procedssor), the user account micxrosoft help and support).

  I tried using command prompt, but it does not work properly. When I typed in the shadow of the list he has the right to copy, my name and disturbing without clichés present in this system.  When I go to system restore I just get ablank screen white. If I go into system the control panel says that my C drive is followed.

  I don't know what else to do Windows XP came with the perchase of my little computer. I only am not computer savvy very please check all instructions fool proof. Please HELP, as all I want for Christmas is saystem restoration. Thank you very much

  Please provide additional information on your system:
  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
  It seems that your system has or has had a malware infection.

  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine...

  You should be able to get your system restore calendar works again quite easily, but who will not only relieve your system of malware.

  Don't forget to fix the problem and the difficulty not only the symptom of the problem.

  If you disabled the system restore and he turned his back, which removes all points existing restoration (this is how it is supposed to work).

  I run a few scans of such malicious software indicated below, then work on all the remaining issues.

  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.  System Restore is sometimes so afflicted, you need to reinstall the system restore (you don't have to reinstall XP - just reinstall the system restore).
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  Restart your system and resolve outstanding issues.
  If your system restore calendar is always to show just a blank white screen, do the following:
  The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

  Re-record the dll is correct, even if they do not need re-registration.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time:

  regsvr32 jscript

  regsvr32 vbscript

  regsvr32 /i mshtml

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  Check your system restore calendar now.

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• New hard drive and CMD R does not work

  Hello

  My old hard drive crashed while I bought a new one.  I tried restoring the internet and it goes through the process, but I just get the apple logo that stays for hours.  Can someone point me in the correct direction.  I am assumeing that I need to make disk utility but I can't seem to him so that I can format the drive.  I also have a snow leopard but startup disk that gets the same results of just the apple logo.

  reset the SMC, PRAM and NVRAM on your MBP

  http://www.Macworld.com/article/2881177/how-to-reset-your-Macs-NVRAM-pram-and-SM c.html

  How to reset memory NVRAM (or LANDAU)

  If your Mac does not start properly or one of the functions listed in the previous section is strange, you can perform a simple reset of your Mace NVRAM or PRAM. Your Mace NVRAM or PRAM reset Resets the data stored on its default setting. (Note: as always, we strongly recommend having a full backup of your important data before troubleshooting your Mac.)

  The process to reset the PRAM and NVRAM is exactly the same thing. Just follow these steps:

  (1) turn off your Mac.

  (2) (2) tourner turn on your Mac, and when you hear the ringtone to start, immediately press and hold the Command-Option-P-R keys. (Note: you can use a wired keyboard to reset).

  (3) holding the keys until the Mac restarts and you hear the startup chime for the second time, and then release the keys.

  After resetting the NVRAM or PRAM, you may need to reconfigure some of your settings of Mace. If you're still having problems with your Mac, you may want to consider resetting the SMC.

  What is SMC?

  On Macs with Intel processors, SMC is system management controller. The SMC chip controls your function of sleep Mace, various lights and indicators, speed of the fan and keyboard backlight power among other things. So if your fan Mace is out of whack, lights are misconduct, he answer correctly when the lid is closed, or the Mac not turn on at all, you might want to reset the SMC. (Note: again, be sure to have a full backup of your important data before resetting the SMC)

  How to reset the SMC in a MacBook with a non-removable battery

  (1) stop the Mac.

  (2) connect your power adapter to your Mac and a power source.

  (3) with the Mac turned off, press shift-control-Option and press the power button at the same time.

  (4) release all the keys and turn on your Mac.

• The response of the cmd + 0 does not work. Is a problem with Safari or Opera or Mac Mail :)

  Try harder. But don't feel put out. The Mac never falls down. I have used them for decades and prefer the Mac. But I fell it twice before last weekend. Try to load Imaging Neuroscience with Matlab Run Time software. At the Apple machine. Nice guy, Henry. Could not diagnose the problem. Did a clean install. Migrated to OS X10.10. Do not like. I always have problems with the machine. But I love the machine. I hate using my machine BACK. Next to neuroscience, software that I use is an open software and UNIX oriented that meets the very good command line. A large part of the software is not ready pour.10 big but worked sur.9. Well, that is until the breaks down. Of the accident, well is the lesson for me, if you crash, debugging and do not go on to the next task until you have solved. Work with Apple with the report of accident in front of you.

  You know, in the part of Oscar Wilde, the Importance of being consistent, he tells Lady Bracknell that he lost both his parents. "For losing a parent can be regarded as a misfortune." But lost both parents statement of negligence. "Yes, two accidents. Shame on me.

  Well, we have all learned, don't we?

  Great to have this forum, however. Yay! Snoop by clicking his heels in glee.

  Instead of a completely clean reinstall, consider trying a drink first. It will at least save your bookmarks and passwords that you may be saved. This article has more information: Refresh Firefox – reset settings and Add-ons.

  If you really want to divert your existing settings, you can use the Profile Manager to start a new settings file. This article has the info on it: use the Profile Manager to create and delete profiles Firefox. I suggest NOT to delete your old profile immediately in case you realize is there irreplaceable data.

• command prompt does not work well. He is unable to run the commands like 'help, tree, ipconfig, netstat', n many more

  the command prompt in my system has attracted some problem. A few months ago, it was all fine. BT now its disturbing. do not run the commands of other than "exit".

  even in the bar of tasks run these commands will not be executed.

  Type has the VALUE

  Copy the output and post with your response.

• New shortcut tab (cmd T) and 'enter' does not work

  Hello

  As mentioned above, the new shortcut to the tab (Cmd T) does not work.

  In addition, when you enter, for example, a password, and then hit the key enter, doesn't work, too. (entering a url, then hit enter to work, if...).

  My first guess is that the shortcut cmd T is already in use by another application, it is not, though. I checked this (preferences-> keyboard-> shortcuts).

  The shortcut worked until yesterday after I had updated to el capitan.

  Someone at - it a similar problem and knows how to fix?

  Retina not MBP 13 inch, osx 10.11.1

  Restart your Mac and then try the command-T Safari shortcut keyboard.

  Command + T works fine on Safari / El Capitan v10.11.2 for me.

• Cisco MSE 8510 MCU - comments PIN does not work

  Hello

  We have a few conferences on 8510 blade. Each conference is the main AXIS and the comments set up PIN. When I dial in the Conference, main SPINDLE works fine but the PIN prompt does not work.

  I tried to deal with the PIN of an endpoint, then the guest PIN from the other end, but the Conference does not accept the feedback PIN. I can use the good main SPINDLE on the two end points.

  Anyone know what may be the issue?

  I just tested this without 8510, no problem at all.

  Can you give us a screenshot of the configuration of your conference?

  I had used the same digital ID for Chair and comments, with a different PIN for each.  When I connected as Chairman, I went straight in.  When I connected as a guest, I went straight in, but I got a quick saying saying President to arrive or to connect.

• Shortcut does not work in cs6

  The shortcut - h command does not work. But it does drop down under Dreamweaver menu bar. On a mac 10.7.4

  I can confirm that Cmd + H does not work in DW CS6 on a Mac. However, Cmd + Q works every time for me.

  When you find what you think is a bug (and Cmd + H is certainly a bug), the best place to report it is via the application form of feature/bug to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishformreport.

• How to select multiple lines of text (without selecting all the text) within a title? (Holding Cmd does not work)

  I need to select several lines of text (in the various sections of the text) within a title without selecting any text. Holding Cmd like you would in other applications does not work, and now Shift selects all. Does anyone have a solution?

  Thank you.

  YYou cannot select several segments of text in a text block.

• Windows 7 Explorer function search does not work / command prompt

  Hello

  I searched several messages, but unfortunately have not yet found a solution that worked. My problem: windows Explorer 7 does not at all. This means that type any word in the search box in the upper right corner makes no difference / nothing happens.

  I tried solving the problems, I tried to get into safe mode, nothing works. I re-indexed my computer, no effect.

  During playback I do a scan with SFC/scannow, I discovered that box "search programs and files" in the lower left corner does not work either. Everything I type, makes the window completely off and if I click on see the results I get the error "Windows cannot access the specified device, path or file. May not permissions to access you the item', even if I am the owner / administrator of my computer.

  Starting from the command-line using SFC/scannow gives the message "you must be an administrator running a console session in order to use the sfc function. This is why I can't use the trick to create another user.

  The search function used to work properly until I had an infection by the virus. I've scanned my computer several times with different antivirus scanners, and nothing is found. I assume that the damage has been done at this time there and would like to know what I can do to fix it (I also have problems with other software, Word for example, works well, but guess that's all the.). I don't want to install a third party software to do research like I want my good computer work with the software that came installed when I bought it.

  Thanks in advance, Hubert

  I found the solution elsewhere (not microsoft site), which worked instantly:

  Navigate to this folder,
  c:\Users\Your name\AppData\Local\Microsoft\Windows\1033\
  And delete the file StructuredQuerySchema.bin

  Therefore, the search worked well.

• UNC paths does not work in Windows 7 command prompt of the Samba server to a Linux server

  The following command works fine in Windows XP, Windows 2003, etc., but does not work in Windows 7:

  dir \\myhist\myshare

  In Windows 7, it fails with "the system cannot find the file specified."

  Is this a bug or is it a 'work-around '?

  Windows 7 has a different layout of Windows Explorer, then Windows XP and Windows 2003...

  1. go to Windows Explorer and look for the folder

  2. at the top, copy the path, and then try again.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• HP Notebook: Wifi and Audio does not work after update of the 10 victory

  I updated the OS to win 8.1 to 10 and it was somthly, but after this recent update to win 10 all at once the wifi has ceased to recognize all the networks around it... also the audio has stopped working. I tried the two troubleshooting and found the audio starts to work after you troubleshoot but wifi does not work. This happens everytime I turn on my laptop, and whenever I have to solve an audio driver to fix it but the wifi doesn't work every time... Please help... I also tried to update the drivers of these two, but he said that the drivers are updated every time... Please let me know if anyone can guide me through this problem...

  Hey @Riken_HP,

  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with the wifi on your HP laptop. I'd be happy to help you.

  What is the exact model of your laptop? If you do not know who will find it here: http://support.hp.com/us-en/drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting wireless network and Internet (Windows 10)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget a network (Windows 10)
  Forget wireless network profiles in Windows 10

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!

  See you soon.

• Automatic update does not work anymore

  My problem is that automatic update does not work anymore and when I try to next turn to the I get some really long file name is missing. I can not down load and reinstall Security Center because it will not only because it is included in Vista. I can't load it updates as the software that is designed to do this does not work. I can't copy and paste the error message due to the fact that I am not given the choice.

  Is enyone knows how to get around this problem.
  The message I get is that Windows does not find:-': {26ee0668-a00a-44d7-9371-beb064c98683}\5\::{36eef7db-88ad-4e81-ad4...     I think that there is more than that, but it does not fit in the window.

  I am running Vista sp1

  Ian Robins, what are the errors that you receive with this procedure? What step gives you access denied? You can attempt to acquire the files listed for a known working machine, but let us try the following:

  It is a simple procedure of rearmament and included are the steps to paste the result of the command prompt, so we read what it gives you:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. At the command prompt, type the following command and press ENTER:

  net stop wuauserv

  net stop bits

  net stop cryptsvc

  Ren %systemroot%\System32\Catroot2 Catroot2.old

  net start cryptsvc

  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

  regsvr32 c:\windows\system32\wuapi.dll

  regsvr32 c:\windows\system32\wuaueng.dll

  regsvr32 c:\windows\system32\wucltux.dll

  regsvr32 wups2.dll

  regsvr32 c:\windows\system32\wups.dll

  regsvr32 c:\windows\system32\wuwebv.dll

  net start bits

  net start wuauserv

  net start Eventlog

  1. Click the icon in the upper left of the window, click on edit, then click on select all, press the Enter key.
  2. By pressing CTRL + V on your keyboard to paste the content in your response.
  3. After a validation or record your response, close the command prompt and restart your computer, and then test Windows Update again.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted. The anti-virus software installs this file but now my internet does not work.

  netBT.sys replacement files viruses

  Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted.  The anti-virus software installs this file but now my internet does not work.  I guess I have to replace this file, but don't know how.  I see that I need to use my windows XP CD but my CD drive is broken.  How can I go about replacing this file?

  Thanks in advance

  Hi DonMendigo,

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompts, the following line and press ENTER:

  sfc/scannow

  See also:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

   

  Method 2: If you are still unable to connect to the internet, then follow the article in the Microsoft Knowledge Base and check.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

   

  I hope this helps.

• Support for Vista change share button does not work

  Hello

  OK, this is the story:

  I have PC running Vista, we have an Xbox360 that I shared media with my PC. All of a sudden, it stopped working on the Xbox, I can still see the files on the Xbox, but it will not play any of them. So I go to network and sharing Center from my PC, and media sharing Option appears under the name immediately, but if I log in as an administrator, it says its judgment. Either like me or the administrator, the "Change" button in the multimedia file sharing does not work, I click and click on, and it does nothing.

  Please for the love of God someone help me, I'm not that computer warned, so please speak slowly.

  See you soon
  Christain

  Hi Revjesus,

  Thank you for using the Microsoft answers Forum.

  What are the physical changes?

  Make sure "Windows Media Player Network Sharing Service" and other related services are started in the services.

  Make sure that your user account is listed as the owner of the Windows Media Player database folder.

  To confirm the ownership of the database folder, follow the steps below:

  Go to the : \Documents and Settings\Settings\Application Data\Microsoft\Media Player folder. If you do not see this folder, you may need to enable Show hidden files and folders.

  To enable Show hidden files and folders:

  In Windows Explorer, click Tools and then click Folder Options.

  Click the view tab and select Show hidden files and folders.

  Right click on the Media Player folder and then click Properties.

  Click the Security tab. If your account name is not listed, click Add and add to the list of owners. You need to be logged in with administrator privileges to perform this step.

  Follow the steps to re-register the dll files below:

  1. click on start, in start search type CMD.

  2. right click on CMD in the list and click Run as administrator.

  3. in the command prompt type regsvr32 jscript.dll, and then click OK.

  4. new type regsvr32 vbscript.dll, and then click OK.

  5 restart the computer.

  To share the files in Media Player, access the link below and follow the steps:

  http://support.Microsoft.com/kb/925708

  You can also check out the link below which gives information on the media sharing:

  http://windowshelp.Microsoft.com/Windows/en-us/help/079a4d8b-e19d-4d7f-BEF1-116cb711364c1033.mspx

  If the foregoing persists, run the System File Checker tool (SFC.exe).  To do this, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
  |
  However, you can also check out the link below for more information about the System File Checker.

  http://support.Microsoft.com/kb/936212

  Let us know if it works very well.

  Kind regards

  Manasa P-Microsoft Support.