CMDTUX_CAT:1423: ERROR, LIBTUX_CAT:541: WARN: LIBTUX_CAT:557 - dead server.

Similar Questions

• CMDTUX_CAT:1380: ERROR: the Message Queue blocking warned childbirth

  Today, I changed a Tuxedo (server) application for product systems (a master and two slaves). Only a small change in the code. But after a period of running, there are a lot of mistakes in ULOG:
  
  CMDTUX_CAT:1380: ERROR: the Message Queue blocking warned childbirth, Qaddr = 583902
  
  And then the server died. After restarting the server, this will happen again later.
  
  I don't know why this happens? THX.

  Hi Bill,

  This happens because the BRIDGE process received a message from the network and could not place the message in the expected IPC queue. This could be because the server handles this message is saved, or the parameters of the system IPC resources are too weak. Please check the recommended actions:

  http://download.Oracle.com/docs/CD/E18050_01/Tuxedo/docs11gr1/messages/cdtux/cdtux013.html

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Unable to Boot PeopleSoft area (PIA)-> CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  As I start my custom domain name (HC92), I get the following:
  

  exec PSWATCHSRV EI o '.\LOGS\stdout' '.\LOGS\stderr' - A - ID - 54217 d TESTSERV s PSWATCHSRV: process id = 1636... Has begun.

  exec PSAPPSRV '.\LOGS\stdout' EI '.\LOGS\stderr'[email protected] s PSAPPSRV d o: process id = 2656... Has begun.

  exec PSAPPSRV '.\LOGS\stdout' EI '.\LOGS\stderr'[email protected] s PSAPPSRV d o: process id = 2644... Has begun.

  exec PSSAMSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSSAMSRV TESTSERV: process id = 2832... Has begun.

  exec PSSAMSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSSAMSRV TESTSERV: process id = 2692... Has begun.

  exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 2448... Has begun.

  exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 496... Has begun.

  exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 2964... Has begun.

  exec PSRENSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSRENSRV TESTSERV: process id 2356 =... Has begun.

  exec PSMONITORSRV EI o '.\LOGS\stdout' '.\LOGS\stderr' - A - ID - 54217 d TESTSERV s PSMONITORSRV: process id = 1056... Has begun.

  exec JSL o '.\LOGS\stdout"e".\LOGS\stderr"- A – n //PSOFT_PC:9000 m 5 - M7-I have 5-j ANY - x 40 s 10 - c 1000000 w JSH: failed.

  tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  tmshutdown - qy

  ==============ERROR!================

  Try to start met domain errors! See TUXEDO log for more details.

  ==============ERROR!================

  ----------------------------

  Domain LOG FILE

  ----------------------------

  PSADMIN.1088 (0) [2015-01 - 13 T 17: 06:34.774] (0) attempt to Begin priming on domain HC92

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.056] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/2

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.056] (3) detected time zone is Pacific SA Daylight saving time

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.134] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSAPPSRV_2\

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:47.056] (2) App Server host lag is DB + 0 0:00:00 (ORACLE PSHRDMO)

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:51.196] (0) server started

  
  

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.603] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/1

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.603] (3) detected time zone is Pacific SA Daylight saving time

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.665] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSAPPSRV_1\

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.837] (2) App Server host lag is DB + 0 0:00:00 (ORACLE PSHRDMO)

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:52.415] (0) server started

  
  

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.728] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/101

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.728] (3) detected time zone is Pacific SA Daylight saving time

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.790] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSSAMSRV_101\

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:53.087] (0) server started

  
  

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.415] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/100

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.415] (3) detected time zone is Pacific SA Daylight saving time

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.493] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSSAMSRV_100\

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.806] (0) server started

  
  

  PSRENSRV.2356 [2015-01 - 13 T 17: 06:56.743] (0) st PeopleTools version 8.54 (Windows) arting . Tuxedo server is RENGRP 92/101

  PSRENSRV.2356 [2015-01 - 13 T 17: 06:56.759] (3) switch to the new log file * C:\PS_CFG_H OME\appserv\HC92\LOGS\PSRENSRV_0113.LOG *

  
  

  PSADMIN.1088 (0) [2015-01 - 13 T 17: 07:13.698] (0) attempt to end HC92 field boot

  * C:\PS_CFG_HOME\appserv\HC92\LOGS\PSRENSRV_0113.LOG *.

  -Begin PSRENSRV boot-

  PSRENSRV.2356 (0) [2015-01 - 13 T 17: 06:57.273] (3) (NET.113): RenRequest customer service request succeeded

  PSRENSRV.2356 (0) [2015-01 - 13 T 17: 06:57.843] (3) (NET.113): RenRequest customer service request succeeded

  2356.2708 [2015-01 - 13 T 17: 07:02.075] (WARN) nsmain: off the server immediately asked

  ----------------------------

  SMOKING LOG FILE

  ----------------------------

  170634.PSOFT_PC! PSADMIN.1088: Start the start on domain HC92 attempt

  170639.PSOFT_PC! tmadmin.556.2400.-2: TMADMIN_CAT:1330: INFO: command: start - a

  170641.PSOFT_PC! tmboot.2392.2544.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS201 0, 64-bit

  170641.PSOFT_PC! tmboot.2392.2544.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is to t to 120 seconds

  170641.PSOFT_PC! tmboot.2392.2544.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected

  
  

  170643.PSOFT_PC! BBL.2340.1680.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit, Patch level (none)

  170643.PSOFT_PC! BBL.2340.1680.0: LIBTUX_CAT:262: INFO: Standard master boot

  
  

  170645.PSOFT_PC! tmboot.1488.2464.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS201 0, 64-bit

  170645.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is to t to 120 seconds

  170645.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected

  
  

  170645.PSOFT_PC! PSWATCHSRV.1636.2816.-2: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170645.PSOFT_PC! PSWATCHSRV.1636.2816-2: LIBTUX_CAT:262: INFO: Standard main starting

  
  

  170645.PSOFT_PC! PSAPPSRV.2656.592.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170645.PSOFT_PC! PSAPPSRV.2656.592.0: LIBTUX_CAT:262: INFO: Standard main starting

  170651.PSOFT_PC! PSAPPSRV.2644.2804.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170651.PSOFT_PC! PSAPPSRV.2644.2804.0: LIBTUX_CAT:262: INFO: main starti Standardng

  170652.PSOFT_PC! PSSAMSRV.2832.2208.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170652.PSOFT_PC! PSSAMSRV.2832.2208.0: LIBTUX_CAT:262: INFO: main starti Standardng

  170653.PSOFT_PC! PSSAMSRV.2692.2668.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170653.PSOFT_PC! PSSAMSRV.2692.2668.0: LIBTUX_CAT:262: INFO: main starti Standardng

  
  

  170653.PSOFT_PC! PSANALYTICSRV.2448.2180.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170653.PSOFT_PC! PSANALYTICSRV.2448.2180.0: LIBTUX_CAT:262: INFO: main s Standardtarting

  170654.PSOFT_PC! PSANALYTICSRV.496.2476.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170654.PSOFT_PC! PSANALYTICSRV.496.2476.0: LIBTUX_CAT:262: INFO: Standard main stsurglace

  170655.PSOFT_PC! PSANALYTICSRV.2964.1536.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170655.PSOFT_PC! PSANALYTICSRV.2964.1536.0: LIBTUX_CAT:262: INFO: main s Standardtarting

  
  

  170656.PSOFT_PC! PSRENSRV.2356.2708.-2: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170656.PSOFT_PC! PSRENSRV.2356.2708-2: LIBTUX_CAT:262: INFO: key start Standarding

  
  

  170658.PSOFT_PC! PSMONITORSRV.1056.2212.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170658.PSOFT_PC! PSMONITORSRV.1056.2212-2: LIBTUX_CAT:262: INFO: main s Standardtarting

  
  

  170658.PSOFT_PC! JSL.640.904.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64 -bit

  170658.PSOFT_PC! JSL.640.904.0: LIBTUX_CAT:262: INFO: Standard master boot

  170658.PSOFT_PC! JSL.640.904.0: INFO: version JOLT Jolt 12.1.1.0 Oracle Listener

  170659.PSOFT_PC! JSL.640.904.0: JOLT_CAT:1568: "INFO: threshold of Compression is tot-1000000 '

  170659.PSOFT_PC! JSL.640.904.0: JOLT_CAT:1242: ' ERROR: Bad Internet type listning address provided: //PSOFT_PC:9000 '

  170659.PSOFT_PC! JSL.640.904.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed

  
  

  170659.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:825: ERROR: process to PSOFT JSL _Pc failed with / t tperrno (TPESYSTEM - internal system error)

  170659.PSOFT_PC! tmboot.1488.2464.-2: tmboot: CMDTUX_CAT:827: ERROR: fatal error met, launch the user error handler

  
  

  170710.PSOFT_PC! BBL.2340.1680.0: CMDTUX_CAT:26: INFO: The BBL out of system

  
  

  170713.PSOFT_PC! PSADMIN.1088End attempt to boot on domain HC92

  -------------------------------------------------------------

  SETTINGS FOR THE DOMAIN

  ------------------------------------------------------------

  ----------------------------------------------

  Menu quick access - configure area: HC92

  ----------------------------------------------

  Characteristic parameters

  ==========                                 ==========

  (1) pub/Sub servers: No. 17) DBNAME: [PSHRDMO]

  (Server 2) Quick: No. 18) DBTYPE: [ORACLE]

  (Query servers 3): No. 19) user name: [PS]

  ((4) shock: Yes 20) UserPswd: [PS]

  ((5) Jolt relay: No. 21) Networkid: [TESTSERV]

  ((6) WSL: No. 22) AddToPATH: [C:\app\psoft\product\11.2.0\dbhome_1\BIN]

  (PC 7 debugger): No. 23) ConnectID: [people]

  (Event notification 8): Yes 24) ConnectPswd: [people]

  [(Serveurs de 9) MCF: No. 25) DomainConnectPswd:]

  (10 assembler) Perf: No. 26) Port of WSL: [7000]

  ((11) Analytics servers: Yes 27) JSL Port: [9000]

  (Bridge 12) areas: No. 28) Port of JRAD: [9100]

  (13) the server events: No.

  Actions

  =========

  (14) load config as shown

  (15) custom configuration

  (16) the settings of the environment

  (h) aid for this menu

  (q) to return to the previous menu

  TIP: Enter 17 to change DBNAME, then 14 to load

  Enter the selection (1-28, h or q):

  --------------------------------------------------------------

  ENVIRONMENT SETTINGS

  --------------------------------------------------------------

  C:\Users\psoft > set

  ALLUSERSPROFILE = C:\programdata

  APPDATA = C:\Users\psoft\AppData\Roaming

  CommonProgramFiles = c: files

  CommonProgramFiles (x 86) = c: Program Files (x 86) \Common Files

  CommonProgramW6432 = c: files

  COMPUTERNAME = PSOFT_PC

  ComSpec=C:\Windows\system32\cmd.exe

  FP_NO_HOST_CHECK = NO

  HOMEDRIVE = C:

  HOMEPATH = \Users\psoft

  JAVA_HOME = C:\Program Files\Java\jdk1.8.0_25

  JAVA_OPTS = "" - Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID = 1.0 - Xms32 m - Xmx64m " "

  LOCALAPPDATA = C:\Users\psoft\AppData\Local

  LOGONSERVER = \\PSOFT_PC

  NUMBER_OF_PROCESSORS = 2

  OS = Windows_NT

  Path = C:\Program Files\Java\jdk1.8.0_25\bin

  ; C:\app\psoft\product\11.2.0\dbhome_1\bin

  ; C:\app\psoft\product\11.2.0\dbhome_2\bin

  ; C:\Windows\System32; C:\Windows

  ; C:\windows\System32\Wbem

  ; C:\Windows\system32\WindowsPowerShell\v1.0\

  ; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\bin

  ; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\jre\bin\server

  ; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\jre\bin

  PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC

  PROCESSOR_ARCHITECTURE = AMD64

  PROCESSOR_IDENTIFIER = Intel64 family 6 model 58 Stepping 9 GenuineIntel

  PROCESSOR_LEVEL = 6

  PROCESSOR_REVISION = 3 a 09

  ProgramData = ProgramData

  ProgramFiles = c: Program Files

  ProgramFiles (x 86) = c: Program Files (x 86)

  ProgramW6432 = C:\Program Files

  PROMPT = $P$ G

  PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\

  PS_APP_HOME = C:\HC9.2

  PS_CFG_HOME = C:\PS_CFG_HOME

  PS_HOME = C:\PT8.54

  PUBLIC = C:\Users\Public

  SESSION = Console

  SystemDrive = C:

  SystemRoot = C:\Windows

  TEMP = C:\Users\psoft\AppData\Local\Temp

  TMP = C:\Users\psoft\AppData\Local\Temp

  TUXDIR=C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010

  USERDOMAIN = PSOFT_PC

  USERNAME = psoft

  USERPROFILE = C:\Users\psoft

  windir = C:\Windows

  windows_tracing_flags = 3

  windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log

  _JAVA_OPTIONS =-Xmx512M

  Found this post:

  ISNAT_CAT:1242: ERROR: Bad Internet type of listening address

  "The problem has been resolved after that I changed my name from ZEMEROV_A to ZEMEROV computer.

  Hyphens are not allowed for regular internet names. The only Microsoft DNS server

  allows hyphens. Obviously TUXEDO checks the internal Web address syntax.

  But I don't know why my IP (10.57.70.246) has failed.

  In any case, the issue is resolved. Make sure that TUXEDO documentation recommends-

  When using the name of the server host you talk server. This is case and sensitive syntax. »

  Where as: I changed my host name of psoft_pc to psoftpc and I changed the same on TNSNAMES and everything worked without problems.

  I'll mark this issue is resolved.

  Thank you.

• CMDTUX_CAT:463: ERROR: could not contact BBL to abandon the old transactions

  Hello!

  I'm trying to start the servers ORA_XA, but receipts because of errors:

  175657.AA02. Konts.LV! BBL.9654.1414731520.0: 27/01/2014: Tuxedo, 11.1.1.2.0, 64-bit Version, Patch level 105

  175657.AA02. Konts.LV! BBL.9654.1414731520.0: LIBTUX_CAT:262: INFO: Standard master boot

  175706.AA02. Konts.LV! ORA_XA.9657.2219669280.0: 27/01/2014: Tuxedo, Version 11.1.1.2.0, 64-bit

  175706.AA02. Konts.LV! ORA_XA.9657.2219669280.0: LIBTUX_CAT:262: INFO: Standard master boot

  175706.AA02. Konts.LV! ORA_XA.9657.2219669280.0: CMDTUX_CAT:463: ERROR: could not contact BBL to abandon the old transactions

  175706.AA02. Konts.LV! ORA_XA.9657.2219669280.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed

  tmadmin - v

  INFO: Oracle Tuxedo, 11.1.1.2.0, 64-bit Version, Patch level 105

  lsb_release - a

  On the WEBSITE Version: Base-4.0-amd64:base-4.0-noarch:core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-noarch

  Distributor ID: ServeurOracle

  Description: Oracle Linux Server release 6.4

  Version: 6.4

  Code name: n/a

  uname - a

  Aa02.konts.lv 2.6.39 - 400.109.6.el6uek.x86_64 #1 SMP Linux kill Aug 28 09:56:40 CDT 2013 x86_64 x86_64 x86_64 GNU/Linux

  WBR,

  Aivars H.

  Aivars salvation,

  You can not run the servers built on previous versions of Tux on later major versions of Tuxedo.  Then try to run a server 10gR 3 on 11 GR 1 material will not work.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• CMDTUX_CAT: 822: ERROR: No. BBL available

  People,

  Hello. I am running Oracle 11 g database 1 material with Oracle Linux 5 operating system.

  I'm under PeopleSoft Internet Architecture Weblogic / Tuxedo / PeopleTools 8.53 at the top.

  The system, run successfully for a long time.

  Now, when I start the server Tuxedo Application, I get the error message as below:

  CMDTUX_CAT: 822: ERROR: No. BBL available, cannot start.

  tmboot: warn: no available on the site mylinux.mydomain BBL. Will not attempt to start the process of the server on the site.

  I checked Oracle document http://docs.oracle.com/cd/E13203_01/tuxedo/tux64/errman/ctmsg08.htm about the ERROR 822. Action to solve this problem is to make sure BBL currently running on mylinux.mydomain. But I don't understand how to do it.

  My question is:

  Can any folk tell me how to have a BBL on Linux with the database server 11 GR 1 matter?

  Thanks in advance.

  What happens if you provide APPSRV. LOG, stderr, stdout... content TUXLOG?

  You said everything worked fine for a while, but why it was broken before commissioning?

  Nicolas.

• tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  I'm familiar with Oracle databases, but still learning my way around PeopleSoft administration.

  After validating the connection information of database with sqlplus from the same platform, psadmin application server start command generated an error message in the console.

  tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  After the attempt failed to start the 8.49 application server, the journal entries were:

  PSAPPSRV.55837058 (0) [28/09/15 09:30:31] (4) the Configuration of server settings: {Journal

  Ging level = 5, sql trace = 12319, mask of trace sql client = 12319, peoplecode trace = 0,

  mask trace client PC = 4095, timeout = 300, County recycling = 2000, max such svc fail

  ures = 2, ORACLE, database name database type of == 'DBXX', database server = ", id = user

  'PXXXXX', connect id is "CXXXXXX"}

  ...

  PSAPPSRV.55837058 (0) [28/09/15 09:30:32] (1) GenMessageBox (0, 0, M): If the database

  gnon: could not sign database DBXX with user PXXXXX.

  PSAPPSRV.55837058 (0) [09:30:32 ago] (0) 28/09/15 start the server failed

  PSWATCHSRV.6685110 (0) [28/09/15 09:30:33] closing

  PSADMIN.58196170 (0) [28/09/15 09:30:39] (0) attempt to end on the dbxx field boot

  While the connectivity of sqlplus had tested OK from a client, PeopleSoft Signon pside.exe two levels on the same client Windows resulted in Invalid User ID and password for the access code.

  The psaccessprfl table had been updated with the connection of data validated by using a platform application server dms shell script.

  The area has been configured using the application server platform psadmin.  UserId, UserPswd, ConnectID and ConnectPswd had been entered and verified.  Passwords have been encrypted by the suite.

  The psoprdefn table showed correct SYMBOLICID uppercase and ACCTLOCK is zero on behalf of PXXXXX.

  The psaccessprfl table showed too correct SYMBOLICID.

  The psdbowner table showed the DBNAME and OWNERID both uppercase.

  The values encrypted in the database matched other environments on the same server platform.

  Why app server not sign to the Oracle database?

  Using the pscfg.exe, Manager of the Windows client configuration utility, I selected the 5 first checkboxes dialog SQL Trace on the left side of the tab of the Trace, I entered the name and location of the trace people tools to create and store the output of client sessions on the same tab.  Then tried another connection to the database, using the pside.exe utility.  The text resulting in the newly created text file showed the last executed statement was a select on the table psdbowner.  I removed my trace entries using pscfg.exe to stop tracing.

  Using the information provided by the last executed statement, I ran a request and discovered that the length (dbname) for the value of the column in the psdbowner table was one character longer than the expected value.

  After update the column value by removing the end interval, the utility psadmin on the server worked without error.

• I can't install any adobe application. I bought all these products and tried to d/l through the creative cloud and direct links, by DDLS trial or normal he gets 2%, then rises to 99% and gives error DW050 and WARNING DS013...  Very frustrated

  I bought all these products and tried to d/l through the creative cloud and direct links, by DDLS trial or normal he gets 2%, then rises to 99% and gives error DW050 and WARNING DS013...  Very frustrating because I've already paid for them. Is a 2nd hand computer, but I erased everything when I bought it.

  Working on a mac osx, report looks like this

  Exit Code: 7 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DS013 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 30 error(s), 2 warning(s) WARNING: DS013: Payload {56DCC6F4-322E-42DA-A5DA-26BAD28C1E10} Camera Profiles Installer 8.0.0.0 is already installed and the session payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0 has no upgrade/conflict relationship with it. WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1 ERROR: DW050: The following payload errors were found during install: ERROR: DW050: - Dynamic Link Media Server: Install failed ERROR: DW050: - Adobe Encore CS6_AdobeEncore6en_USLanguagePack: Install failed ERROR: DW050: - Adobe XMP Panels: Install failed ERROR: DW050: - Adobe Player for Embedding 3.3: Install failed ERROR: DW050: - Required Common Fonts Installation: Install failed ERROR: DW050: - Adobe CSXS Infrastructure CS6: Install failed ERROR: DW050: - Adobe Premiere Pro CS6: Failed due to Language Pack installation failure ERROR: DW050: - Adobe Encore CS6: Failed due to Language Pack installation failure ERROR: DW050: - Adobe Utilities CS6: Install failed ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed ERROR: DW050: - Adobe ExtendScript Toolkit CS6: Install failed ERROR: DW050: - Camera Profiles Installer: Install failed ERROR: DW050: - AdobePDFL CS6: Install failed ERROR: DW050: - Adobe Extension Manager CS6: Install failed ERROR: DW050: - Adobe Bridge CS6: Install failed ERROR: DW050: - AdobeTypeSupport CS6: Install failed ERROR: DW050: - AdobeHelp: Install failed ERROR: DW050: - Adobe Premiere Pro CS6 Family: Install failed ERROR: DW050: - Adobe Mini Bridge CS6: Install failed ERROR: DW050: - Suite Shared Configuration CS6: Install failed ERROR: DW050: - AmericanEnglishSpeechAnalysisModels: Install failed ERROR: DW050: - Adobe Media Encoder CS6: Install failed ERROR: DW050: - Adobe Premiere Pro CS6 Support: Install failed ERROR: DW050: - Photoshop Camera Raw 7: Install failed ERROR: DW050: - Adobe Premiere Pro CS6_AdobePremierePro6.0en_USLanguagePack: Install failed ERROR: DW050: - Adobe Encore CS6 Support: Install failed ERROR: DW050: - Recommended Common Fonts Installation: Install failed ERROR: DW050: - DynamiclinkSupport: Install failed ERROR: DW050: - AdobeCMaps CS6: Install failed ERROR: DW050: - Adobe CSXS Extensions CS6: Install failed ------------------------------------------------------------------------------------- 
  Now as stated I have tried several different download methods, removed all firewalls & antivirus. Any Suggestions???
  

  The system configuration required

  Exit Code: 7 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... WARNING: DS013 ...  -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 30 error(s), 2 warning(s)  WARNING: DS013: Payload {56DCC6F4-322E-42DA-A5DA-26BAD28C1E10} Camera Profiles Installer 8.0.0.0 is already installed and the session payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0 has no upgrade/conflict relationship with it. WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1  ERROR: DW050: The following payload errors were found during install: ERROR: DW050:  - Dynamic Link Media Server: Install failed ERROR: DW050:  - Adobe Encore CS6_AdobeEncore6en_USLanguagePack: Install failed ERROR: DW050:  - Adobe XMP Panels: Install failed ERROR: DW050:  - Adobe Player for Embedding 3.3: Install failed ERROR: DW050:  - Required Common Fonts Installation: Install failed ERROR: DW050:  - Adobe CSXS Infrastructure CS6: Install failed ERROR: DW050:  - Adobe Premiere Pro CS6: Failed due to Language Pack installation failure ERROR: DW050:  - Adobe Encore CS6: Failed due to Language Pack installation failure ERROR: DW050:  - Adobe Utilities CS6: Install failed ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed ERROR: DW050:  - Adobe ExtendScript Toolkit CS6: Install failed ERROR: DW050:  - Camera Profiles Installer: Install failed ERROR: DW050:  - AdobePDFL CS6: Install failed ERROR: DW050:  - Adobe Extension Manager CS6: Install failed ERROR: DW050:  - Adobe Bridge CS6: Install failed ERROR: DW050:  - AdobeTypeSupport CS6: Install failed ERROR: DW050:  - AdobeHelp: Install failed ERROR: DW050:  - Adobe Premiere Pro CS6 Family: Install failed ERROR: DW050:  - Adobe Mini Bridge CS6: Install failed ERROR: DW050:  - Suite Shared Configuration CS6: Install failed ERROR: DW050:  - AmericanEnglishSpeechAnalysisModels: Install failed ERROR: DW050:  - Adobe Media Encoder CS6: Install failed ERROR: DW050:  - Adobe Premiere Pro CS6 Support: Install failed ERROR: DW050:  - Photoshop Camera Raw 7: Install failed ERROR: DW050:  - Adobe Premiere Pro CS6_AdobePremierePro6.0en_USLanguagePack: Install failed ERROR: DW050:  - Adobe Encore CS6 Support: Install failed ERROR: DW050:  - Recommended Common Fonts Installation: Install failed ERROR: DW050:  - DynamiclinkSupport: Install failed ERROR: DW050:  - AdobeCMaps CS6: Install failed ERROR: DW050:  - Adobe CSXS Extensions CS6: Install failed -------------------------------------------------------------------------------------
  

  The system configuration required

• Exit code: 6 see specific errors and warnings below for troubleshooting. For example, ERROR: DW050... - Summary - 0 fatal Error (s), 2 error (s), 0 warning (s) ERRO

  Exit code: 6

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DW050...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s), 0 warning (s)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Package redistributable Microsoft Visual C++ 2010 (x 64): installation failed

  ERROR: DW050:-Package redistributable Microsoft Visual C++ 2010 (x 86): installation failed

  Hello

  Please see: -.

  Error "exit 6" or "exit 7" | "» Install log | Read, write, file system errors. CS5, CS5.5

• The update of Creative Suite 5 Design Premium install fails - Exit Code: 7 WARNING: display unmet requirements.   -0 fatal Error, error 105, 107 warning (s)

  Disabled Creative Suite 5 Design Premium on the old computer to a new computer.  The Acrobat 9 installed fine.  But I get the following when installing Creative Suite 5 Design Premium:

  Exit code: 7

  -Summary - 0 fatal Error, error 105, 107 warning (s)

  WARNING: Display requirements not met for {9B97EC91-B3FD-4BFF-88FC-5345A26AC2E7}

  WARNING: Display requirements not met for {A1BC7068-C1BA-410F-8B9A-DB807C803DE2}

  WARNING: Display requirements not met for {C79312BD-3E76-4474-A10C-1435D1856A4B}

  WARNING: Display requirements not met for {CFC9F871-7C40-40B6-BE4A-B98A5B309716}

  WARNING: Display requirements not met for {E8815668-95B0-443D-AC92-2BFD7DD8F16A}

  WARNING: Display requirements not met for {F9766AC1-1461-1033-B862-DF8FE1C033BE}

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  Immediately, the above is repeated several times, more a lot more.

  Install the new computer under Windows 8

  Same error in the second journal as well.

  Please try to copy the DVD Setup on the computer, and then check. Instructions below:

  Install the Creative Suite since Office products | CS5, CS5.5, CS6

• CMDTUX_CAT:4747: ERROR: exceeding 110% of the TUXEDO system binary user approved

  Hello
  
  I have a C++ on Tuxedo 8.1 application (patch level 343). Recently, I found that the application is suspended for a particular object and crashed after a while. After reviewing the log ULOG folder, I found the following exception message:
  
  121106.AIX7! BBL.635004.1.0: CMDTUX_CAT:4747: ERROR: more than 110% of TUXEDO binary system licensed by the number of users (11/1), 23 hours, 50 minutes and 0 seconds left before the security of BBL
  121106.AIX7! TMSYSEVT.1646758.1.0: CMDTUX_CAT:4748: ERROR:. SysLicenseError: More than 110% of TUXEDO binary system licensed by the number of users (11/1), 23 hours, 50 minutes and 0 seconds left before the security of BBL
  
  I am unable to find the specific resolution for this exception on site Tuxedo. Let me know if need more info.
  
  Thank you
  
  Kind regards
  Amit Wankhede

  Hello

  It's a licensing issue. Tuxedo detects that you have exceeded the limit of users allowed for your license and BBL has been blocked in 24 hours

  In http://download.oracle.com/docs/cd/E13203_01/tuxedo/tux91/messages/cdtux/cdtux047.htm

  4747

  ERROR: Exceeded 110% of TUXEDO binary system licensed by the number of users (val/val), time of val Val minutes val left seconds before the safety of BBL

  Description
  SHM mode, the system has determined that the total number of active users exceeded 110% of TUXEDO users licensed. The locking of the BBL will occur at the specified time. If the BBL blocked, no new customers can join the application until the number of active users across dips below 110% on a subsequent cycle of analysis of BBL.
  Action
  Update your license from TUX with the largest number of users to avoid blockages of the system. Please contact your system administrator to TUXEDO from BEA.

  Concerning

• CMDTUX_CAT:754: ERROR: error parsing of the configuration files

  Hi Tuxedo Experts,
  I have compiled and related sample code Tuxedo client and server (simpapp). According to the README, the next steps is running y tmboot command. It starts smoking simpserv Server? If this is not the case, how can I start that?
  
  In addition, when I ran this 'tmboot-y' command, I get the error:
  ===========================================
  $ tmboot y
  
  tmboot: internal error: CMDTUX_CAT:754: ERROR: error parsing of the configuration files
  
  
  
  tmboot: internal error: CMDTUX_CAT:1360: ERROR: configuration file not found
  ===========================================
  
  Could you please help me with that.
  
  Thank you and best regards,
  Ahsan Asghar

  Hey Ahsan,

  Well, the error message says tmboot cannot find TUXCONFIG. If the TUXCONFIG environment variable has not been set or the tmloadcf command has not completed successfully to create TUXCONFIG. Whenever you login, you will need to run the tux.env file to set all necessary environment variables. If tmloadcf finishes successfully, it should have printed one or more of the error messages.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• The reason for CMDTUX_CAT:989: ERROR: no FBFR service

  A shell script:
  ud32 - UN - C < $1 tpsysadm
  
  A script:
  SRVCNM. TMIB
  TA_CLASS T_SERVER
  TA_OPERATION GAME
  TA_SRVGRP GRP1
  TA_SRVID 10100
  Load TA_SERVERNAME
  TA_STATE NEW
  TA_MAXGEN 200
  TA_REPLYQ Y
  TA_RESTART Y
  TA_CLOPT - A t - / opt/app/config
  TA_MIN 1
  TA_MAX 1
  
  
  Run:
  UD.sh ud.ubb
  
  It returns:
  v490h4-tux-t: / opt/app/src/config$ ud.sh ud.ubb
  CMDTUX_CAT:988: ERROR: detected ud syntax error in buffer #1 layouts
  LIBFML_CAT:8: ERROR: unknown domain name
  
  CMDTUX_CAT:988: ERROR: detected ud syntax error in buffer #2 layouts
  LIBFML_CAT:10: ERROR: incorrect syntax in the Boolean expression
  
  TA_CLASS T_SERVER
  TA_OPERATION GAME
  
  CMDTUX_CAT:989: ERROR: no FBFR service
  TA_MAX 1
  TA_MAXGEN 200
  TA_MIN 1
  TA_SRVID 10100
  TA_STATE NEW
  TA_CLOPT - A t - / opt/app/config
  TA_REPLYQ Y
  TA_RESTART Y
  Load TA_SERVERNAME
  
  My .profile file:
  export TUXDIR=/opt/app/tuxapp/TUX91/tuxedo9.1;
  Export TUXCONFIG = / opt/app/airopen/config/tuxconfig.
  export TUXLIB=/opt/app/tuxapp/TUX91/tuxedo9.1/bin;
  export TUXINC=/opt/app/tuxapp/TUX91/tuxedo9.1/include;
  export PATH =. : / opt/SUNWspro/bin: $TUXDIR/bin
  export FIELDTBLS32=bank_fml,rtpnr_fml,common_fml,ui_fml,openpnr.fml32,open_detr_fml,/opt/app/tuxapp/TUX91/tuxedo9.1/udataobj/tpadm,/opt/app/tuxapp/TUX91/tuxedo9.1/udataobj/Usysfl32:/opt/app/tuxapp/TUX91/tuxedo9.1/udataobj/Usysflds;
  Export VIEWDIR = / opt/app/airopen/view;
  Export VIEWDIR32 = / opt/app/airopen/view32;
  export LD_LIBRARY_PATH = $TUXDIR/lib;
  ...
  
  Could someone there explain to me?
  Thank you very much.

  Bill,

  The delimiter to separate the domain names in FIELDTBLS32 is a comma, but there is a colon between two of the entries in your FIELDTBLS32, but also a semicolon at the end:

  export FIELDTBLS32=bank_fml,rtpnr_fml,common_fml,ui_fml,openpnr.fml32,open_detr_fml,/opt/app/tuxapp/TUX91/tuxedo9.1/udataobj/tpadm,/opt/app/tuxapp/TUX91/tuxedo9.1/udataobj/Usysfl32 *: * /opt/app/tuxapp/TUX91/tuxedo9.1/udataobj/Usysflds *; *

  For this reason, ud32 can not open Usysfl32, which is where SRVCNM is defined. You must set FIELDTBLS32 as
  export FIELDTBLS32=bank_fml,rtpnr_fml,common_fml,ui_fml,openpnr.fml32,open_detr_fml,/opt/app/tuxapp/TUX91/tuxedo9.1/udataobj/tpadm,/opt/app/tuxapp/TUX91/tuxedo9.1/udataobj/Usysfl32

  I also removed to the Usysflds of the FLDTBLS32 definition since it sets the same fields as Usysfl32 but use different fields for 16-bit FML. With both of these FIELDTBLS32 with comma OK deliminators would work only because Ussyfl32 comes first.

  By looking at the code, it is clear that full path names will work in FIELDTBLS32, although I have never tried this. Assuming that your scope definitions are in $APPDIR another way to set the fields would be

  Export FLDTBLDIR32 = $APPDIR: $TUXDIR/udataobj
  export FIELDTBLS32 = bank_fml, rtpnr_fml, common_fml, ui_fml, openpnr.fml32, open_detr_fml, tpadm, Usysfl32

  Kind regards

  Ed

• tmboot: internal error: CMDTUX_CAT:4849: ERROR

  I downloaded Tuxedo11gR1 on my Windows 7 Enterprise (64-bit) machine and am trying to get simpapp and running.
  
  I can tmloadcf CUB very well, but tmboot fails with "tmboot: internal error: CMDTUX_CAT:4849: ERROR: failed to initialize the public key subsystem.
  
  Looking at the forum, a few years ago a lot of people seems to have had this problem on windows in the past and althoughI can find no definitive answer, there seems to be a theory according to which the question relates to the TUXCONFIG, TUXDIR, etc. in various cases in the tuxconfig and the environment. I checked and this is not the case.
  
  Do you have the inklings, how can I fix it, or am I condemned to fall at the first hurdle?
  
  Any help would be appreciated!
  
  If it helps, here are the * section my configuration tmunloadcf file MACHINES'ed:
  
  * MACHINES
  "HANSON" LMID = "simple".
  TUXCONFIG = "C:\oracle\tuxedo11gR1\samples\atmi\simpapp\tuxconfig."
  TUXDIR = "C:\oracle\tuxedo11gR1."
  APPDIR = "C:\oracle\tuxedo11gR1\samples\atmi\simpapp."
  TLOGNAME = "TLOG.
  TLOGSIZE = 100
  CMPLIMIT = 'MAXLONG, MAXLONG. '
  NETLOAD = 0
  SPINCOUNT = 0
  MAXACLCACHE = 100
  MAXOBJECTS = 1000
  SICACHEENTRIESMAX = '500 '.
  
  and here's my environment:
  
  TUXCONFIG = C:\oracle\tuxedo11gR1\samples\atmi\simpapp\tuxconfig
  TUXDIR = C:\oracle\tuxedo11gR1

  Hi Peter,.

  I forgot to tell you about the audit, that we do for the ex-BEA/Oracle employees. ;-)

  Because I did the same thing, you say you do, obviously something is different. What installation options that you use?

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

  PS Use VirtualBox, it's really great for such things! Nonetheless, VirtualPC should be good for this. Also, we certify Tuxedo on Fedora, RHEL only. So you might want to try Oracle Enterprise Linux. If you do, one thing to note is that SELinux may cause problems if you should set it to permissive to most, or disabled.

• Smoking: CMDTUX_CAT:816: ERROR: could not exec, executable file not found

  Saludos
  
  Soy an estudiante y estoy con experimentado a trial of smoking 10.3 en Windows XP y cuando trato inciar application simpserv, obtengo lo siguiente:
  
  C:\Oracle\tuxedo10gR3_VS2005\samples\dnet\cli\callapp > tmboot
  All admin processes and the server starts? (y/n): y
  All admin process is started and the server C:\Oracle\tuxedo10gR3_VS2005\samples\d
  net\cli\callapp\tuxconfig
  INFO: Oracle Tuxedo, Version 10.3.0.0 with VS2005, 32-bit, Patch level (none)
  
  Starting process of the admin...
  
  exec BBL - one:
  process ID = 2596... Has begun.
  
  The server process starting...
  
  exec simpserv - R:
  CMDTUX_CAT:816: ERROR: could not exec, executable file not found
  exec WSL - A - n - //IBM934007079:3050 - x 5 - m 2 n 10:
  Failed.
  1 started process.
  
  No comprendo por what happens, the mi archivo UBBCONFIG config es esta:
  
  #
  # (c) 2006 BEA Systems, Inc. All rights reserved
  #
  
  * RESOURCES
  IPCKEY 76543
  #Example:
  #IPCKEY 76543
  
  MASTER SITE1
  NETWORKID DOM1
  MAXACCESSERS 50
  MAXSERVERS 50
  MAXSERVICES 50
  MODEL SHM
  PERIOD 5
  
  * MACHINES
  IBM934007079 LMID = SITE1
  APPDIR = "C:\Oracle\tuxedo10gR3_VS2005\samples\dnet\cli\callapp."
  TUXCONFIG = "C:\Oracle\tuxedo10gR3_VS2005\samples\dnet\cli\callapp\tuxconfig."
  TUXDIR = "C:\Oracle\tuxedo10gR3_VS2005."
  MAXWSCLIENTS = 10
  
  * GROUPS
  GROUP1 = 1 LMID GRPNO = SITE1
  WSGRP GRPNO = 4 LMID = SITE1
  
  * SERVERS
  SRVID = SRVGRP 11 simpserv = CLOPT GROUP1 = "-A"
  
  WSL = WSGRP SRVID = 1 SRVGRP
  RESTART = GRACE MAXGEN = 10 Y = 0
  CLOPT = ""-A - n - //IBM934007079:3050 - x 5 - m 2 n 10 ""
  
  * SERVICES
  
  The idea are iniciarla para poder accesarla through ALSB.
  
  Thank the ayuda can prestarme, gracias.

  Hello

  You can verify that the wsl.exe file is located in C:\Oracle\tuxedo10gR3_VS2005\bin?

  If so, can you please post the contents of the ULOG to the period of time when you tried to start this application?

  Thank you
  Todd little
  Chief Architect of Oracle Tuxedo

  PS I do not think that oracle supports Windows XP to run the Tuxedo servers. This works if you install the Windows Server 2003 kit, but we cannot approve what Microsoft does not consider Windows XP a server operating system.

• tmboot: internal error: CMDTUX_CAT:4578: ERROR: no binary system

  Hello
  When I Planner process Launcher (8.48.08 under Win Server 2003) I have the following error message:
  
  tmboot: internal error: CMDTUX_CAT:4578: ERROR: no binary system
  
  Any idea?
  Thank you.

  Do you have installed Tuxedo as well (and which version)? Is there a license file (lic.txt)?

  Nicolas.