Cod file name

Similar Questions

• How to put the name of the Module file and use the current file name in the code?

  Hello

  I create SequenceCall (in MainSequence), but there must be the Module file name and existing file where the module. I found an old function that are not part of the API (TS_SequenceCallModuleSetUseCurrentFile() and TS_SequenceCallModuleSetSequenceName(). Those who are in the help file, but not in tsapicvi.c.

  You can help someone with this (CVI code)?

  Best regards

  branar

  Hello

  Problem is solved using different fp (tsadpcvi.h, tsadpcvi.c). Instead of using tsapicvi.c with TestStand 4.2, the missing functions were found in tsadpcvi.c with TestStand 2010).

  Best regards

  branar

• Write to the worksheet only if the file name is different

  Hi all

  I'm trying to write some code, but to no avail. Basically I have a file name to each time interval (say 2 seconds). I built a small table for example.

  The names of files in the table are repetitive and I don't want to write the data in the worksheet, if the file name is the same.

  Bascially, I need to write the header and the table for the 1 c:\1.txt files and after c:\1.txt the data (more than 3) I want to only write the table only (no header) and add it to the worksheet.

  That is to say for c:\1.txt file, it will consist of 1 header and 4 sets of table.

  Then the process is repeated again until a newfilename (c:\2.txt) is encountered.

  c:\2.txt will also include 1 header and 4 sets of data.

  Can anyone help on this?

  Your loop is you allowing to read beyond the end of file names in your table. This passes an empty file name write it on the spreadsheet VI which requires to ask the name of the file. You should test this condition.

• Automatic generation of file name with Date stamp

  Please see the attached VI. (LV2012)

  What I want to do is to generate a file name in the format: DayOfYear - month - day - year. txt

  The way I coded it, I was able to generate according to my condition. For example today it generated a file name ' 14-1-14 - 2016.txt ' on my computer.

  But the same code when it is run on the client computer generated this: 14-1 /-4 /-016 .txt and, of course, the VI ceased due to the illegal file name. I gues this is because how each computer formats the date, the time information.

  How to code a generic VI to create the name of the file that I need on any computer?

  Just let the Date/Time Format string to do all the work...

  

• In XP, file name may not display symbol (TM), shows a '?

  I have a file on a CD I know its file name contains a symbol (TM). But it shows '? "now.
  I know that the "?" means that Windows did not recognize this character, which makes the file inaccessible.
  Is there anyway to make Windows can recognize the character, or let me copy this file to a place and rename it?

  Hi DHLao,
   
  -What is the content of the CD?
  -Can you see the symbol of the file while you try to use the file, or in the browser?
  -What exactly happens when you try to copy the file? You receive an error message or error code? If Yes, indicate the same.
   
  TM symbol usually indicates the symbol of trade mark of the manufacturer.
   
  Try to copy the file using the copy of the command at the command prompt and check if you can copy successfully.
   
  a. Click Start. Click run.
  b. type cmd and press ENTER to open the command prompt.
  (c) in the command prompt, type the command as shown here:
   
  copy source destination
   

  Use this command to copy a file. In the command syntax, source Specifies the file to copy and destination Specifies the folder or the file name of the new file. You cannot use wildcard characters indicated by an asterisk (*), and you cannot copy a folder. If you copy a compressed file from the Windows installation disk, the file is automatically decompressed while it is copied.

  The source of the file can be any folder in the system folders of the current Windows installation, removable media, the root of any drive, the local installation sources, or the Cmdcons folder.

  If the destination is not specified, the default location is the current folder. If the file already exists, you are prompted if you want only the file copied to replace the existing file. The destination cannot be removable media.

   
  Description of the Windows XP Recovery Console for advanced users

• Setting the maximum file name length under Win XP x 64

  I am trying to find a way to set the maximum size of the name files in Windows XP x 64?

  I think I need to set the value of the MAX_PATH limit in environment variables or the Windows registry?  I am running Windows XP x 64 on an NTFS partition, so my theoretical maximum for a file name is 255 characters. Is it possible to put down?

  Destructive how would making this change not my system?

  Thank you

  MAX_PATH is a system/constant variable used when the Windows operating system is compiled.  There is no way to effectively change without recompile Windows from its source code.  Note that this sets the maximum length of the full path to the file, including directories parent so that the only way that a file can actually be 255 characters long would be if it was located in a root directory.  This is not a hard limit, however, there are some programs that can handle path names has more MAX_PATH (for example "Robocopy").

  HTH,
  JW

• Select multiple files in the same folder from a list of file names

  I'm a wedding photographer.  Each marriage record is 700-1000 pictures.  When our wives to order their photos, you must select each photo to download to the printer.  I want to know if there is a way to just a list in the folder search bar which will show only the photos in the list on this issue?  I can't get it to do 1 photo at a time.

  Hello, Airborne4905!

  If I understand, you have a list of files that you want to print automatically. Well, for this, you must create a script. Below I show you a simple script.

  Now, assume that you have a d:\print.txt file that contains the names of the files in the folder in c:\users\public\pictures\sample pictures\ with a file name on each line, for example:
  Greek.jpg
  Dock.jpg
  Forest.jpg

  Then you have a file named print.vbs that contains the following script code:

  Set objShell = CreateObject ("Wscript.Shell")
  Set shell = CreateObject ("Shell.Application")
  Set objFS = CreateObject ("Scripting.FileSystemObject")
  Set objFile = objFS.OpenTextFile ("d:\\print.txt", 1)
  strFileContents = objFile.ReadAll

  arrLines = Split (strFileContents, vbNewLine)
  For each strLine in arrLines
  strFile = "C:\\Users\\Public\\Pictures\\Sample Pictures\\" & strLine
  hull. StrFile ShellExecute' ', '', ' print '.
  objShell.Run "mspaint/p" & Chr (34) & strFile & chr (34), 0, True
  Next

  objFile.Close
  
  If you want to print all the files that you specified in your d:\print.txt file, you simply run the print.vbs file.

  Note:
  1. the strFile = "C:\\Users\\Public\\Pictures\\Sample Pictures\\" & strLine line contains the path to your images folder - if you need browse another folder, just edit this string (note that you must keep the double-bar reverse oblique to the reverse slash single-bar place that you normally use!).
  2. the Set objFile = objFS.OpenTextFile ("d:\\print.txt", 1) line contains the path to the file where you list the images to print. Change the path to reflect the actual path of the file.
  3. If you need a more elaborate version or some other questions about scripts, please ask questions in the Forum Microsoft Scripting Guys on http://social.technet.microsoft.com/Forums/en/ITCG/threads/.

  I hope this helps!

• Error 1325 Documents is not a valid short file name

  I get an error code "error 1325 documents is not a valid short file name" when I try to add an update to a program I installed.  I tried to download the "cleanup utility" Microsoft, but I get the same message.  I don't have Office XP or 2002 on this computer, I've always had in 2007.  It's really make my computer use frustrating.  What can I do?

  
  

  I don't know what is this window in your screen shot, it is not something I see on my machine, what are you doing right click to display this property page?

  See if I can explain a little better?

  Type in the box libraries Start Menu search.  Open the folder named "Libraries" in the list in the Start Menu when the search is complete and right click on the subfolder "Documents (library)", try the default button (first make a note of the location of the library).

  Do not ignore the fact that the user profiles sometimes receive corrupted it is why we test with other newly created users.  Create users and then remove are fairly easy.

  This is just for information, in which case it turns out that other users do not have problem of the current user.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  811151 - how to copy user data to a new user profile
  http://support.Microsoft.com/?kbid=811151

  Description of Windows Easy Transfer for Windows Vista
  http://support.Microsoft.com/kb/928635

  Have you run ChkDsk as who will also search the file error problems?

• How to create random file names

  I have a folder containing 600 JPEG files. I want to replace the current file with those randomly generated names. So instead of files names IMG_11.jpg, IMG_12.jpg, IMG_13.jpg, I don't want to see something like 342.jpg, 8.jpg 107.jpg.

  Could someone smart give me a code that would do this. I want to change ONLY the names of files in this folder.

  I need simple instructions and comprehensive on how to run the code, suitable for a young man is no longer in the brain.

  I DON'T want TO change the name of each file by hand. I CERTAINLY DON'T want TO cut-and - paste or other references to Movie Maker or any other manufacturer of trade show.

  Please read each question carefully before answering. I tried to ask before and gotten completely irrelevant responses that make me tired.

  Hi David,

  Thanks for posting the question in the Microsoft Community.

  Unfortunately, you will not be able to run a code to change the names of files in bulk. However, you can try to look for a third-party software that might help.

  Note: using third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  Thank you.

• Printers Multifunction LaserJet Pro 476DN: Scan to Email - questions of file name

  When scanning to email, files always sent as "Scan.pdf", how can we change it so it includes a code of time as part of the file name?

  Hello

  This cannot be done.

  Since the server integrated Web (which is accessible by typing the printer IP address in your browser), you can open the scan tab and click e-mail Options.

  Of you can change the file name prefix as required, but which do allow use of specific prefix, not a dynamic date and time... those are are included in the email itself and can not be added to the fileame.

• Each bitmap in the COD file extra resource

  Hello

  JDE generates an additional COD file for each bitmap resource, which I have added to the project. Their names are project - 1.cod, project - 2.cod, etc. Is their way to include these additional catches of cod in the default COD file that is just project.cod?

  I do not; I think that once you exceed a certain size of a COD file (64 KB), it begins to chunk the COD upward into pieces. It's fine, when you deploy OTA or whatever, the phone will re-install the parts and all goes well.

• The OTA installation and large. COD files

  Hi, I'm new to the Blackberry development. I am developing a small image editing app for Blackberry and planning to distribute them using my site (OTA). The problem is that my .cod file size is about 500 KB. I've searched the forums and some suggested to break large cod in several smaller files of the Cod. But exactly how do I do this? Thank you

  All you need to do is open the COD file in a program like WinZip archive and extract the files.  It's just a zip of the rest of your COD files.  Note that the cod inside firstsibling file will have the same name as the parent COD file, so make sure that extract you it in a different directory.  If you use the BlackBerry Java plug-in for Eclipse, all you need to do is deploy the files in the directory JAD.

  You can read a bit more info on that here: the limit file size of wireless downloads

• How to use the ota installation cod file

  Using the webworks platform, we have the standard and ota install files, I need to know how the cod in the ota installation file can be used.

  Put the web in an accessible location OTA files and point the browser on your phone to the URL.

  That is to say.

  If you download the OTA cod files in a directory named "/ ota/appname" on your server web you acceding to http://your-url.ca/ota/appname/cod-name.cod in the BlackBerry browser to install the application

  Rory

• Listen to the actual system image file name?

  All,

  When you try to view the file system image on a WAAS unit by entering the command "Show flash" or "dir" I see a list of files, but none of them seems to be the image of the system.  My goal is to see the name of the real image of the entire system file to determine if she is 'Accelerator' or 'universal' as part of the file name, IE. similar to a router or switch.  Is this possible with a WAAS unit?

  albwaas01 #sh flash

  WAAS (disk-based code) software version: WAAS - 4.4.5 - b5

  The system image on flash:

  Version: 4.4.5.b5

  Directory of flash system:

  The system image: 200 sectors

  Reserved for the bootloader image rescue and other areas: 31 sectors

  a total of 256 sectors, 25 free.

  albwaas01 #dir

  time of last change of name size

  --------------  -------------------------          -----------

  125052 Thu Jan 30 11:08 2014 UcliEvt.bak

  120752 Mon Feb 3 2014 UcliEvt.log 15:43

  4096 Wed Oct 31 14:19:18 2012

  actona

  4096 Wed Mar 6 12:27:26 2013

  cliTemp

  4096 Wed Oct 31 14:14:24 2012

  core_dir

  4096 Wed Oct 31 14:15:42 2012

  crash

  4096 Fri Jan 17 16:49:25 2014

  downgrade

  Mon 3 4096 Feb 15:31:49 2014

  errorlog

  4096 Fri dec 13 16:24:13 2013

  newspapers

  16384 Wed Oct 31 14:14:11 2012

  lost + found

  4096 Wed Oct 31 14:14:21 2012

  pki

  4096 Mon Feb 3 00:02:00 2014

  its

  8192 MON 3 Feb 15:45:53 2014

  service_logs

  4096 Wed Oct 31 14:19:18 2012

  reel

  93855 Wed Oct 31 14:35:06 2012 syslog.txt

  Mon Mar 4 64 12:06:13 2013 sysreport.sh.log

  4096 Wed Oct 31 14:14:19 2012

  var

  508 Wed Oct 31 14:14:21 2012

  Hi Adil,

  You can see the type in the show version and see the running configuration.

  Cisco Wide Area Application Services (WAAS) software

  Copyright (c) 1999-2013 by Cisco Systems, Inc.

  Version of the software Cisco Wide Area Application Services (universal-k9) 5.1.1c (build b3 9 may 2013)

  Version: oe694 - 5.1.1c.3

  And

  -performing configuration-

  ! WAAS-universal-k9 version 5.1.1c (build b3 9 may 2013)
  !
  camera mode-accelerator applications

  Cisco Wide Area Application Services (WAAS) software

  Either way, universal image runs on all while that if you run Accelerator is not CM WAE WAE universal while is possible CM as an accelerator.

  Kind regards

  Kanwal

• Install problem COD file

  Hi all

  I know it's important to look for answers before posting and I spent several hours to do.  I found a few related messages, but the solutions did not resolve my problem.

  I have a J2ME application that is fully tested for the game.  It works fine when it is installed as a pair of jad/jar on each Simulator and device I've tried.  And the midlet icon appears in the interface of the phone, just as it should.

  The game uses no RIM specific libraries or modules.  As a jad/jar pair, the same build runs on dozens of non-blackberry devices.  The code in the jar detects that the phone is a blackberry using System properties and the game is its own minor configuration to look nice on a blackberry.

  The next step is to convert the application into a cod file and sign it.

  You use the JDE 6.0, I made a new project, imported the jad/jar and run the Build command.  The cod was created, and accordingly modified jad.  So far so good.

  I have my signature identification information, and once again, using the JDE, I ran request Signatures.  The interface reported success.  No problems.

  The cod file is 207 k and consists of 4 cod files.  I read the instructions for this case and unpacked the cod file in its 4 cod files.  App.COD, 1.cod - app, app - 2.cod, app3.cod.

  I've posted four cod files as well as the jad file on my server, the server apache even where I serve regularly jar/jad files.

  I have triple checked the mime types in the .httaccess file.  Mime types are correct for jar, jad and cod.

  I point the browser on the Blackberry 6.0.0.337 Simulator 9800 to the jad file.  I get the download window with the properties of jad and the download button.  I click Download.  If I do this a second time, I get the button replace, so the Simulator think that the file has been downloaded, in this case.

  It seems that the files are for download.  The watch cursor appears 4 times, probably once for each file in cod.  No errors.

  At the end of the download, I get a message "the application has been installed successfully" and an OK button.  But, no run button, as I get with the installation of the pot.  I click OK.

  I exit the browser and return to the main screen.  There is no download folder.  The game is not in the folder games or Applications.  If I go to Options/Applications, the game is not listed there.

  If I menu click the Options/Applications window, I get: JVM 104 Eception NullPointerException error.  However, I had not yet tried to run the application.  A stack trace turned up a few odd lines:
  UI - EUI no face is detected
  VM - BORK
  However, I do not know what generated those lines or when.

  By the way, I also tried to download the full 207 k cod or in this case, I get the 907 error expected because the jad file is referencing files of cod that the server could not find as separate files.

  I also tried to download other simulators, for example 5.0.0.54 5 9700.  As above, the files seem to download very well and I get the message: "the application has been installed successfully" and an OK button.  On this Simulator, there is a download folder, but it is empty.  The game is not in games or in the Applications folder.

  On this Simulator, I go in the Options/Applications, and there is an entry for my game.  The title of the game is OK, but there is no icon.  I opened the entry and get title properties and a delete button.  There is no run button.  It shows the installed date and another button for the properties of the Module.  It also shows the size correctly and the signatory IDs.

  I also tried this procedure on a physical device, the AT & T 8300.  I had the same behavior as the 9700 Simulator.  Again, there is no problem with installation of the jad/jar.  The problem is with the jad/cod/COD-1/cod-2/COD-3

  Why is - this game appearing to successfully download and install successfully but apparently not be installed can thus be run?

  Thank you for your time.
  Alan Weiler

  I think I found the problem.  I skipped a step during the cod using a jar of J2ME as a source of files.

  In the projectroperties:Application panel, I do not enter the name of my main class name of the Midlet main class field.  Apparently this area causes the main class to be the entry point.

  With the class entered into this field and re - build the cod file and new signing, I was able to download and run the game on a device.