Code 39 corrupt... file DVD rom players and cd writer do not work

Similar Questions

• How to fix code 39 for cd/dvd-rom readers

  How to fix code 39 for cd/dvd-rom readers

  Here the answer
  
  Error 39

• USB ports, CD/DVD player, and Mike just does not work

  So I'm pretty sure that these things are happening at the same time, although there are risks my trying to troubleshoot the USB ports have contributed to the failure of the microphone (internal and will not capture sound) and cd/dvd drive (not open). Perhaps? It is true that I know little about these kinds of things, but I'm much less following the indications which is what I did to try to tackle the problem of USB port, which was the first I noticed. I followed all the advice I could find online for troubleshooting when all usb ports do not respond. I used Device Manager to disable in its regular and safe mode. I also uninstalled them all in both modes (even if they reinstall until I'm able to restart). I unplugged and wait 5, 10, 15 min etc. There was a difficulty mentioned about watching the. Mine and INF files do not contain the mentioned error. I'm tempted to all my files backup and restore the computer to factory settings, especially now that the CD/DVD player and the micro does not work. This would solve the problem? If these things are related? Could even restore settings because I can't have in the cd/dvd drive? It's a dell inspiron 1721, and it crushed while you restart for almost a whole day just all the time I've began to notice all these malfunctions. I really appreciate any guidance!

  Good so I solved all of these problems. I don't know what did the trick, but when I went back in the BIOS to re - activate the ports they have worked!

• HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work code 32

  HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work Code 32

  The other post:

  HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work, another driver can provide this functionality. (Code 32)

  Hello

  1 are there any changes or updates made on the computer?

  2. when exactly you get the error message?

  Code 32: a driver (service) for this device has been disabled. Another driver can provide this functionality.

  I suggest to return the item and try to run the fix it and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Let us know if it helps.

• The Remote option for matching seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

  The Remote for iPhone & Remote app matching option seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

  Fixed. I removed the Remote, reloaded app to my iPhone and then reinstated the info Apple ID and password in the app all connected immediately. The 'Remote' option is not always present under file/devices/Remote, but everything works well at this point.

• I loaded windows 8 and have a dvd matshita bd - mlt uj23oas in a sony viao and it player will not work what I do

  I loaded windows 8 and have a dvd matshita bd - mlt uj23oas in a sony viao and it player will not work what I do

  Hello

  Check this location of registry for Upper and Lower filters...

  They will appear on the right after clicking on the location of Reg...

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4d36e965-e325-11ce-bfc1-08002be10318}

  Remove all entries found perhaps restore your disk, but can also cause something to stop working...

  Maybe you can identify the program causing the problem with the name of the filter and update...

  An example of this is iTunes... It uses a "GEAR" driver that can cause problems...

  Install the most recent usually solves the problem...

• My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

  My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

  I hope this will help:

  Error 213:19 | Problem is the license for this product

• I have a HL-DT-ST DVD - RAM GH40L SCSI CdRom that do not work.

  I have a HL-DT-ST DVD - RAM GH40L SCSI CdRom that do not work. Device Manager indicates "a driver (service) for this device has been disabled. Now, the drive does not at all.  Any ideas on how to solve this problem? I can't get any DVD or CD to run on my PC now.

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• ICloud and Outlook 2010 does not work

  My contacts and calendar icloud do not work in Outlook 2010.  I've done all the troubleshooting applies recommended - still no dice.

  When I click the calendar or contacts, I get an error message that says: "cannot open all the files.  The information store could not be opened.  I've updated the IoS last night on my phone and Tablet - and it works always this morning at my office on Outlook 2010.

  It happened all of a sudden, and it's after a windows update 2 days ago.  I turned on so anti-virus program.

  He is puzzled, and I think it's related to updates.  I was hoping that the update IOs last night could solve the problem.

  This - see How to fix "Information Store could not be opened" on Outlook, Windows 10 & iCloud.»»

• MS Office 2010 Pro and my printer does not work,

  I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
  All the apps work except in order to print it.
  I am running WinXPPro w/sp3.

  Jim K.

  Hello

  1. What is the exact error message?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the printer?
  4. this problem occurs with all files that contain the Active X objects or specific file?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  

  This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry : how to back up and restore the registry in Windows

  a. Click Start and run, type regedit.exe, and then click OK.

  b. expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click 1200 and then click on edit.

  d. in the value data box, type 0. Then, click OK.

  e. close the registry editor.

• After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?

  Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.

  Hi all

  I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.

  
  
  
  
  
  
  
  
  
  
  
  
  

  Patch

  Acer

  1. fix camera function fail after upgrade to Win10 TH2.

  20160506

  91.7 MB

  30/05/2016

  Download

  Thank you
  Cory

• 0x802d007 WinUpdate and BIT error does not work - nothing is fixing.

  0x802d007 WinUpdate and BIT error does not work - nothing is fixing.

  Hello

  (1) what is the exact error code that you get?

  (2) service pack you have installed for XP?

  Method 1: Verify that the services are started
  Make sure that BITS and the automatic updates service are started. To do this, follow these steps:1.Click Start, click Run, type services.msc, and then click OK.
  2. in the list of services, click on automatic updates, and then click Properties.
  3. in the startup type list, click Automatic, and then click on apply.
  4. If the service status is stopped, click Start, and then click OK.
  5.right - click Background Intelligent Transfer Service, and then click Properties.
  6. in the startup type list, click Manual, and then click on apply.
  7. If the service status is stopped, click Start, and then click OK.
  Method 2: You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 3: You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144
  
  For reference:
  How to troubleshoot a service that crashes in Windows XP
  http://support.Microsoft.com/kb/934650
  How to resolve problems connecting to Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/818018
  Method 4: How to reset Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Note: You may need the XP disc for some functions in the steps above.
  I hope this helps!

• DirectX, d3d9.ll & d3d10.dll and Windows Update does not work... (Same problem?)

  I had some problems with my computer lately...

  The first thing I noticed is that I failed to run games and applications and I got this weird error 'missing d3d9.dll' and something in style with... "it could be fixed if you have reinstalled the application," but it didn't and I kept getting the error, then I went to see if there was even a d3d9.dll or a d3d10.dll - but it was not...

  Then. I tried to download em for the internet, but later, I noticed that they were for DirectX and therefor was not sure I had good... Then I went to update my DirectX - but failed. He says that I already had an update of DirectX version and it refused to install. I however, perhaps I could uninstall directX, but I couldn't find where and how...

  Then I however, maybe it's because some weird windows update problems - so I went to check how many updates there. I check it the day prior to that, but all of a sudden there are 14 new updates that I had not installed yet (overnight 14 new updates!).

  Does anyone have a solution to this? Please, I desperately need help!

  Hi exique,

  1. don't you make changes before the show?
  2. on what game and application that you get this error?

  DirectX runtime for end-users (also known under the name of DirectX) is an extension for the Microsoft Windows operating system that provides a set of quick material orders, low level that they can use to improve performance for Windows games and multimedia programs. The current generation of Windows games and multimedia programs does not work properly without DirectX. So, by design, you cannot remove DirectX.
  See DirectX: frequently asked questions

  We recommend that you scan sfc (System File Checker) to see if any system file is missing or damaged. To do this, try the following steps on Vista and Windows 7
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  If the problem persists, we recommend that you reinstall the game or program that causes this problem.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi, my DVD MATSHITA DVD - RAM UJ 875 S ATA does not work

  Even I am facing the same problem.

  I have a lenovo y410 laptop. my DVD MATSHITA DVD - RAM UJ 875 S ATA does not work... it is not reading all discs... not to burn all...

  When the problem occurred I immediately called the customer... but as the phones warranty period I can replaced also do it... Please help me with a solution...

  This is what happens when I insert a disc in the drive... the led flashes for a few seconds... the disc seems to move but then the led stops blinking and nothing happens...

  I have tried both what is the necessary changes in the REGISTRY & also uninstalled the software and restarted my laptop. But the problem is still there.

  Please let know me of any other way to solve this problem

  Hello
  
  I suggest you run the fixit and see if it helps:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  It will be useful.

• My menu desktop and Startup icons do not work.

  original title: icons gone AWOL

  Background: I am a regular user account and the administrator is protected by. We run Windows Vista Home Premium Service Pack 2.

  Concern: Desktop icons and start menu do not work properly. They simply open the interface 'open with '. I can get SOME their right of first programs and selecting "Start", but it is a bit tedious. The admin and another user on this computer are not affected by this problem. We're all stumped here and when I tried to use the Microsoft support site, it took no identification number.

  Advice?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Maybe the user account it is corrupt, we will try to create a new user account and control. You may need to use the administrator account to create a new user account.
  Reference:
  Create a user account
  http://Windows.Microsoft.com/en-in/Windows-Vista/create-a-user-account
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile