Code 8007065E error and 800 b 0100

Similar Questions

• Code 8007065E error when you try to install KB2385678

  Original title: Security Update for Windows 7 for x 64-based systems (KB2385678) _

  Windows HAS KB 2385678 update CODE 8007065E error

  Hi peterdawes,

  Follow the steps below:

  Method 1: Open the Windows Update troubleshooting tool

  To resolve the problem, run the Windows Update troubleshooting tool . He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

   

  Method 2: Installation offline

  Download and save the Setup on your desktop package and try to install the same.

  Download the update from the link below:

  Update security for Windows 7 for x 64-based systems (KB2385678)

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Repeated error codes: 80073712 and 800 b 0100 update SP2 and Vista security update

  I have recently reinstalled Windows Vista, and I'm constantly getting error codes when I try to download the updates. So far, I found solutions for all of them, but I can't find solutions for the updates listed below.

  I thought that maybe the old files make it difficult for Windows to date.

  Information on my computer:
  System model: Compaq Presario CQ 50 Notebook.
  Name of the operating system: Microsoft Windows Vista Home Basic
  Version: 6.0.6002 Service Pack 2 Build 6002
  System type: X 86-based PC

  Error Codes and updates include:
  1. Update for Vista (KB979559) - error Code: 80073712

  2 Microsoft .NET Framework 2.0 Service Pack 2 update for Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2 (KB974470) - error Code: 800 b 0100

  Another thing is, whenever I try to download these updates, my computer always wants me to reboot.

  I tried following instructions to solve the problem of error code found on the Microsoft Solutions:
  1. I have disabled the firewall PC Tools Antivirus and Windows. Tried to download again and no luck.
  2. I ran the Microsoft FixIt "System Update Readiness Tool", and he said he couldn't find any problems.
  3. I've been through the tool administrator CMD System File Checker, and he says "not found any breach of integrity.

  Yesterday, I tried to download SP2 from Windows Update, and I got the error code: 8024200d. I then downloaded from the Microsoft Web site, and it worked fine. I tried to download the SP2 update on the site, and it failed.

  Any help would be GREATLY appreciated!
  Thank you!
  Tonya

  Why did you have to reinstall Vista and how did you do?

  A Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  ======================

  In re the error, you got when you tried to install the Vista SP2 via Windows Update:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista upgrades not work - error code 8007065E, 80070641 and 641

  Original title: windows Vista upgrade does not

  I tried to run updates and constantly getting the following errors:

  code 8007065E,

  code 80070641, and

  Code 641

  but can't them solved using Microsoft?

  Hello

  Did you the latest changes on the computer before this problem?

  Before the windows update follow the methods check if it works very well.

  Method 1: Put the computer in a clean boot state before proceeding with the installation of windows update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Temporarily disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Run the Windows Update Troubleshooter.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/en-us

  Method 4: Follow the steps in the section provided.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Difficulty of corruption problems MSI software update registration

  http://go.Microsoft.com/?linkid=9666880

  You can also manually install the update (numbers KB) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  It may be useful

• Code 8007065E error when trying to install the KB2633171 update

  Original title: 8007065E error Code

  Hello

  I'm trying to download the updates and the following error.

  Details of update for Windows 7 (KB2633171) error message security failure: Code 8007065E

  I also tried to download other software and it fails. Can someone help me out here?

  Amanda

  Hello Deepak

  It was most helpful, thank you very much!

  I actually made a mistake last night, I got sucked in by scammers of Microsoft and let them stupidly on my computer. They knew so much on my computer that I thought them!

  When he asked me for money, realization hit me and I ended the session. I then restored the computer about a month ago. I don't know if it has stopped them hack into my computer or not, but the updates for my antivirus etc. are working.

  Do you know if there is anything else I should do here?

  I really appreciate that you take the time to help.

• Windows Update up code 80244019 error and after a retry, I have an infinite "check updates".

  I tried to install Windows 7 on another new hard drive, once windows finishes the installation, I install the motherboard drivers, then the keys to the internet, so as soon as I search for updates in Windows Update I code 80244019 error, then I try again once or twice I have "install the new Windows Update software". To check the updates, you must first install an upgrade for windows update. "Your automatic update setting will not change... to install the update will automatically close and reopen. After i 'install', I and infinite "check updates". This has happened 3 times now when I tried to install Windows in a new ssd. I have no idea what to do.

  Hi Fabio,.

  My sincere apologies for the late reply. Where did you get your Windows 7 installation media?

  Looks like you need to get a new copy with integrated Service Pack 1.

  See instructions how you can download a new copy:

  How to: What are my options for Windows 7 reinstall media?

• After the upgrade to Windows 8, problem with teredo tunneling adapter says code 10 error and the device cannot start

  Original title: teredo tunneling adapter error number 10 on windows 8

  on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.

  It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop

  I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10

  Please help me

  Thanks in advance

  Hi Samuel,.

  We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.

  Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

  I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.

  I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. the Device Manager cannot start the device.

  2. one of the pilots who needs the unit does not start.

  3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.

  We could try following common resolutions to solve the problem:

  1. update the drivers for this device

  2 launch a service of automated troubleshooting

  3 contact material supplier technical support

  For more information, please see the following article:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  In addition, this article could also be designated:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8

   

  Please answer us on the State of the question to help you further.

• Windows 7 64-bit updates KB980408 and KB981793 fails with the error code 8007065E and 800 b 0100

  KB980408 updates Windows 7 64 bit and KB981793 fail with error code 800b0100 and 8007065E respectively.

  Help, please

  This is a fresh (blank) load, THAT No. SW Antiviral has been installed.

  I see. Start by reading...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section ofhttp://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update Windows error 80073712 and 800 b 0100

  I have two windows Vista update error.

  One is for the security update error 800b0100 kb977816.

  Second is kb980248 gives error 80073712.

  Ive tried everything. Deleted antivirus package. Restart and scan disk.

  Ive downloaded system update readiness tool. I can't find a solution.

  Does anyone have a solution?

  Here are recent mistakes in recent days. None of the older posts have a solution.

  ChristopherS_,

  Take a look at this article as it addresses the error you see:
  http://support.Microsoft.com/kb/957310

  Try the steps listed in it and post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 80073715 and 800 b 0100 during the update to Vista

  When I try to install updates (Windows Vista protection updates KB951376, KB952069, KB967723), it appears ups that was not possible to update error 80073715 and 800b0100.

  My PC has Vista 32-bit professional type system.

  Thank you

  Hello

  You can try the following methods and check the status of the issue.
  Method 1:

  Windows Update error 800b0100.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 2:

  Configure the computer to clean start State to check software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the above article.

  Method 3:

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

• After you have installed the Realtek drivers, I get code 10 error and cannot start sound.

  original title: help with my sound please

  After you have installed the realtek driver it says code error 10 can't start sound...

  also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:

  Log name: System

  Source: PlugPlayManager

  Date: 17/05/2012-18:50:27

  Event ID: 12

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  : My computer

  Description:

  The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.

  The event XML:

   

     

      12

      2

      0

      0 x 80000000000000

     

      435

      System

      badimo-PC

     

   

   

      Modem Conexant - in the generation Type 2

      HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102

      00000000

   

  Hello I want to,

  The problem you describe looks like you are maybe install the wrong driver for your sound card.
  Have you checked that the driver is for your specific device?
  If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start".
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• 2 problems: code 80070424 error and a message saying that I am not under a copy is authentic.

  Out of the blue, I get a message in the corner of my screen, "Windows 7 Build 7601, this copy of Windows is not genuine." All day, I tried Microsoft solutions without success. At the same time, I got a window that asked my product ID, and I used the 25-digit Microsoft label on my computer. The ID was dismissed as unfounded. Long story short, I got the key product using Belarc and its different from that on the label, but it's correct. I know because Microsoft, I learned the last 10 digits and it matches. Now I can not find the Microsoft page requesting my product ID. I don't have the option, click Start, right-click computer, click Properties and activate. It says unavailable.

  Second problem that my being the result of the first, when I use the update of the window, I get the error code 80070424. I tried all the solutions on the Microsoft Web site, and I feel like a dog chasing its tail. I downloaded all Fixit and even said that it is not a problem with the Update window. When I click on windows update, I get the message "you may be victim of software counterfeiting. My computer is a gateway and Windows 7 has been factory-installed by Acer.
   
  Of you techies light allows an old man to solve these problems?
  Jerry

  Hello

   
  Thanks for posting of application on Microsoft Community.
   
  According to the information you have given it seems that you are not able to run Windows Update as a result of not being able to activate Windows. Therefore logically first difficulty
  the problem of activation and then work on Windows updates.
  As you say "at a time given, I got a window that asked my product ID, and I used the 25-digit Microsoft label on my computer." The ID was rejected as unfounded". I wish to inform you that a product ID is different from the product key. If you receive an activation window then in order to validate the window you must enter the product key 25 digits.
  The 20-character product * ID * is created during the installation and displays highlight down (in the Activation section) on the opening window resulting Panel right click on the computer icon and select 'Properties' from the context menu. It is used to get/qualify for technical support (limited though it may be) of Microsoft; It is of no use during the installation process.
  25 character product * key * is used to 'prove' ownership of a license is necessary to perform the installation and is either stored on the DVD packaging on a sticker that says "Don't lose that number", or on a certificate of authenticity (CoA) label
  for an OEM computer.
  To access the window of Activation of Windows, follow these steps:
  1. Click Start
  2. Type slui.exe and press ENTER.
  3. You will see the Windows Activation window
  4. Enter the 25-character product key and try to activate Windows.

  See also the suggestions of Keith - on April 30, 2010

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-is-showing-as-not-genuine/cbd43297-0e4d-458C-8487-9168c4cd668d
   

  Error "Windows is not genuine" in Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/2704233

  Note: Above the method contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  For the problem with Windows Update, I suggest you refer to the article below:

  Windows Update error 80070424

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070424#1TC=Windows-7

  Additional reference:

  Genuine Windows: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• OPatch commands fail with code 255 error and not able to find pots YES

  
  Hello

  I am trying to apply a patch using opatch but I get this error: "OPatch was not able to find pots YES to load their duration. Please provide valid Yes location using 'oui_loc' option. OPatch failed with error code 255".»

  Oracle is 11.2.0.3 x 64 on Windows Server 2008R2 x 64. The PATH variable have % ORACLE_HOME%\OPatch, % ORACLE_HOME%\OPatch\jlib, %ORACLE_HOME%\bin in it.

  The single command OPatch that works and not to throw the error is the command "opatch version.

  OPatch Version: 11.2.0.3.5

  OPatch succeeded.

  No luck on the search for resolution of problem or documentation on MOS.

  I can't find any documentation on the option 'oui_loc '.

  Any help would be appreciated.

  Sébastien

  First check that your ORACLE_HOME\oui\jlib directory already exists. If so, make sure you have "srvm.jar" in the directory. If not, copy and paste the directory or file (depending on what you're missing) of 11.2.0.3 another environment. I had the same problem and support was able to recreate the problem by renaming the folder jlib, but my specific question was the missing file 'srvm.jar '. Copy one through another system solved this issue. If you are missing "srvm/jar", you can also check ORACLE_HOME\jlib for "srvm.jar", because this could be a problem, as well (it was for me).

• Update for Windows Vista (KB2676562) Security - Code 8007065E error

  Update for Windows Vista (KB2676562) security failed 34 times since 05/16/12.

  How to solve this problem?

  Hello

  Follow these methods.

  Method 1: Follow the steps in the article.

  The problems with the installation of Vista updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: You can temporarily disable your antivirus and then try to install the update.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow these steps.

  Step 1: If the methods above do not help, we can put the computer in a clean boot state, and then install the update manually.

  To help solve the problems, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Step 2:
  Now, to install the update manually.

  If you use a 32-bit computer, download and install this update.

  Update security for Windows Vista (KB2676562)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29829

  If you use a 64-bit computer, download and install this update.
  Update security for Windows Vista for x 64-based systems (KB2676562)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29768

  Please take note : After completing the clean boot troubleshooting, make sure that you start the computer in normal mode.

• Failed to update Windows Vista Code 800 b 0100

  When I try to update to Windows VISTA, it fails and I get the error message: 800 b 0100. So I have downloaded and run the system update readiness tool. Now, read the CheckSUR.log, she has this:

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2010-01-22 00:33

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking
  (f) x86_bthmtpenum.inf_31bf3856ad364e35_0.0.0.0_none_23d1b875dc1c1425 CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.0.6002.18112.bthmtpenum presence of registry package failed, possibly an orphaned package on package watchlist
  (f) x86_wpdfs.inf_31bf3856ad364e35_0.0.0.0_none_49c6cb2f1ac5fe37 CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.0.6002.18112.wpdfs presence of registry package failed, possibly an orphaned package on package watchlist
  (f) x86_wpdmtp.inf_31bf3856ad364e35_0.0.0.0_none_43743b50cedad977 CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.0.6002.18112.wpdmtp presence of registry package failed, possibly an orphaned package on package watchlist
  (f) x86_wpdmtphw.inf_31bf3856ad364e35_0.0.0.0_none_1c1880257795310c CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.0.6002.18112.wpdmtphw presence of registry package failed, possibly an orphaned package on package watchlist

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB973565~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_5_for_KB973565~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB973565_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB973565_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB973565~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 4500
  Found 9 errors
  CBS MUM lack count: 5
  CBS Watchlist component lack Total count: 4

  Unavailable repair files:
  servicing\packages\Package_2_for_KB973565~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_5_for_KB973565~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB973565_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB973565_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB973565~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_2_for_KB973565~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_5_for_KB973565~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB973565_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB973565_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB973565~31bf3856ad364e35~x86~~6.0.1.0.cat

  Although I am not able to use Windows update, I can use my computer for about 10 to 15 minutes. Then it freezes.

  an answer another threadhttp://social.answers.microsoft.com/Forums/en-US/vistawu/thread/a64b64e2-f62e-460c-af4e-faceec84c95d
  Rob - bicycle - Mark Twain said it is good.