coherence.transaction.internal.storage.FixedPartitionKey exception

Similar Questions

• com.tangosol.coherence.transaction.exception.UnableToAcquireLockException:

  I have the following code, with result the exception below,
  
  INFO: javax.ejb.EJBTransactionRolledbackException: EJB Exception:; nested exception is: com.tangosol.coherence.transaction.exception.RollbackException: the transaction has been restored: com.tangosol.coherence.transaction.exception.RollbackException: the transaction has been restored: com.tangosol.coherence.transaction.exception.UnableToAcquireLockException: impossible to acquire the lock key write: 89d0ebd1-82dc-4711-b805-eba5761c7e9b; nested exception is: com.tangosol.coherence.transaction.exception.RollbackException: the transaction has been restored: com.tangosol.coherence.transaction.exception.RollbackException: the transaction has been restored: com.tangosol.coherence.transaction.exception.UnableToAcquireLockException: impossible to acquire the lock key write: 89d0ebd1-82dc-4711-b805-eba5761c7e9b
  
  
  Cache configuration: transactional
  ======================
  
  <!--
  Transactional caching scheme.
  ->
  < transactional system >
  < scheme name > transactional example < / system-name >
  < service name > TransactionalCache < / service-name >
  < serializer >
  < instance >
  > class name < com.tangosol.io.pof.ConfigurablePofContext < / class name >
  < init-params >
  < init-param >
  type string < param > < / param-type >
  chips-pof - config.xml < param-value > < / param-value >
  < / init-param >
  < / init-params >
  < / body >
  < / serializer >
  < number of threads > 3000 < / thread count >
  < autostart > true < / autostart >
  < request-timeout > 30000 < / timeout request >
  < / transactional system >
  < / cache-plans >
  < / cache-config >
  
  
  Code
  =====
  tokenCache = CacheFactory.getCache ("tokenCache");
  EqualsFilter filterNE = new EqualsFilter ("getNeID", Networkid);
  EqualsFilter stateNE = new EqualsFilter ("getState", TOKEN_AVAILABLE_INT);
  AndFilter andFilter = new AndFilter (filterNE, stateNE);
  LimitFilter limitFilter = new LimitFilter (andFilter, PAGE_SIZE);
  Update ValueUpdater = new ReflectionUpdater("setState");
  UpdaterProcessor updaterProcessor = new UpdaterProcessor (updater, TOKEN_RESERVED_INT);
  Map tokenMap = tokenCache.invokeAll (tokenCache.keySet (limitFilter), updaterProcessor);
  
  
  I don't know why and how remedy.
  
  Published by: Ankit Asthana 9 January 2012 18:55

  Hi Pierre,.

  UnableToAcquireLockException indicates that the write operation was not able to acquire a write lock. Once an entry is made in a transaction, the entrance is write-locked until the transaction is complete. If you have multiple threads, update the entries of same, you can modify your code to handle the exception and retry the operation.

  Thank you
  Tom

• Why my iPod touch only show as a device of internal storage from my computer and Explorer, not a player?  Uninstalled and reinstalled iTunes several times and still it persists.  I can only look at pictures not music

  I can't get my iPod Touch appears as a disk. It shows only as an internal storage device, and I only see photos under a DCIM folder. No drive letter is

  It's the way it is supposed to be. See recover your iTunes from your iPod or an iOS device if the media you want to extract the device there.

  TT2

• Omni 10 5601tw: upgrade from 32 GB to 64 GB internal storage

  I can move my omni10 5601tw internal storage to 64 GB if yes then how and I had pay for it

  @Pratap-Kumar

  It is partially true, the expandable storage up to 32 GB and for a MicroSD card.

  I hope that clarifies.

• Black 2 10 does not internal storage

  Hello. Sorry for my bad English - I'm Russian and text - google translated.
  Problem:
  I unsecured Black 10 64 GB
  and the device does not have an internal storage-
  Turn on > logo > start menu > internal storage don't set - only installation usb, SD or bios.
  Boot on another image (recovery image on usb or ubuntu live cd winPE - no results - storage is still not in sight.
  In "my computer"I saw only the C drive (which is my USB).

  But in the information of the bios (at the start), I saw that my storage is "samsung mcg8gc".
  I can not seen elsewhere, if the chip is broken\burned?

  (Downloaded on net) native recovery image can not recovery system, because error 'drive system not found '.

  How to solve this problem without new chip reballing?

  SOLVED by the Russian community
  https://goo.GL/1rRAFe

• Lenovo IdeaPad K1 and recommended to send files of data from the pc to the internal storage K1.

  What is the recommended method to transfer data files from my pc to my Lenovo IdeaPad K1 internal storage space?

  Did not seem to matter that I try a file transfer, there has never been a problem (and I speak not only of this device, but to other Android devices as well).

• Accidentally deleted all the files of internal storage and sync new files of internal storage

  Hello

  I was installing FolderSync to sync some folders to my internal phone storage. My mistake was to choose the root of internal memory, which has deleted all folders of files and synchronize folders for internal storage. I tried to reset the phone factory, to recreate the folders and files originally placed on the internal memory, but not luck. I only used the phone a few days and did not want to spend time trying to recover files/folders, because I guessed that syncinf files of internal storage would undermine the 'old' files anyway. Is it possible to recreate the internal memory of the State when I used the phone? For example, instructional videos and sample photos reappear when I do a factory reset (also by placing the tick for the removal of the internal memory).

  BR

  Frank

  After doing the full recreated factory reset your phone will be clean and ready for use with the root folder. But... demonstration videos and examples of photos are not part of the firmware. It's cleaned depending on content of available region until the phone is factory or user deletes them.

  So to recover these files, you need to find any other user with the same phone as you and kindly ask him to share these files with you (if these file sharing is legal in your country).

• BlackBerry Z3 low internal storage

  What does 'Data' means when we go to

  Settings > storage and access > select any application (for example the BBM)

  three memoirs are 1) install 2) data) 3 Total

  Data continuously increases in all applications, resulting in lack of internal storage, please help me with my problem, I got my phone wiped three times, but after a month problem shown again

  Please help me

  You can try a reload of software through BlackBerry Link, which will most likely solve the problem, but you will lose all installed applications, contacts and user data. It will be like a new device out of the box.

  Here is a link to download the link for Windows. Connect the phone to the computer via USB, BlackBerry should open the link. Go to software update and there should be an option to reload the software for the device.

• Applications blackBerry Smartphones to be recorded in the internal storage card or media other than RAM.

  Hi guys,.
  IAM hrdware configuration set with hand torch
  512 MB of RAM
  4 GB of storage internal

  If I install any appps blackberry app world are those get saved in the RAM memory, which reduces the speed of the aircraft, to help me how do to install applications to the media card or internal storage

  Thank you best regards &,.
  Sandra

  Hello!

  There are three types of potential memory on a BB: 1) application memory, the device memory) 2 and 3) Media/SD Card Memory.

  Application memory - it is the most important; It is protected (not available to the user), dedicated and (fixed size) space as the destination for the installation of applications (more a few storage applications, overhead and other costs). You can't touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can install only here... There is no other choice.

  The device memory - it is space on your BB you can touch these files, images, media, etc. In general, it is not very big, but it is available.

  Memory card SD/Media- is what it says... your SD card to store files, media, photos, etc.. It can be as large as your BB OS can support... see this KB:

  • KB05461 Sizes of card MicroSD taken in charge by the BlackBerry device software

  On some devices/OS levels, you can see 'Free file' (Options > status), I think this is equivalent to AppMemory. You can see on other devices, all the memory usage levels three (Options > memory). Here are some tips to use:

  • KB02843 What is the function of low memory manager on the BlackBerry smartphone
  • KB14320 How to maximize space and power battery life on the BlackBerry smartphone
  • KB14213 Call logs, SMS text and email messages are deleted from the BlackBerry smartphone

  Finally, it is always important to correctly close applications when you are finished with them. Using the back or on the red button won't do that - those leave the app to decide what to do... and some let themselves memory-resident, consumes resources on your BB, slowing down the overall performance. On the contrary, to close an application, tap on and select 'Close' or 'Quit'... which force the application to be closed, freeing resources for your new use it consumed. Some applications will always be running (in general - BBMessenger, browser, homescreen, phone and Messages)... but, you should always close them properly - especially the browser... If we leave on a web page, it will not consume only additional resources, but the power of the battery as well.

  In addition, each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy. Some have taken to do this on a regular basis as a preventive measure... some as often as once a day. Others got the app QuickPull to automate a simulated Batt Pull.

  Good luck!

• Configure a cluster of vsphere with 2 host with internal storage shared via HP LeftHand - doubts

  Hi, I'm trying to create a two-node esxi cluster. These nodes will share their internal storage with HP Lefthand Appliance (HP StoreVirtual VSA). I need the first steps to create the cluster, or better, the macro blocks, IE:

  -install esxi on each node
  -install Virtual Center and create the vmware cluster

  -Deploy the VM VSA...

  I have a lot of doubts because of the reason why I can't have (installation of the HP guide said) virtual machines on other than the VM VSA itself VSA data store. How can I configure things? Creating first two warehouses of data, deploy VCenter on a data store, create the cluster, deploy VSA VM on the other data store...

  Can you help me please?

  DL380G5 host as the location for the ODM is ok, but you may need to upgrade the host in any case since v12 FOM requires ESXi 5.0 or newer.

  ... what happens if the update fails and the hypervisor does not start more?

  I know we can't answer a question with a question. Anyway, how do save you virtual machines on this host now?

  It is true that the VSA VM cannot be migrated, but I can migrate the VCenter to a to another data store when I will have created the DATA of VSA data store (one that the hypervisor consider as an iSCSI target), I'm good?

  I'm sure that it is correct. Unless I'm missing something, vCenter Server is just another virtual machine running on the cluster VSA VSA does not require vCenter Server to run.

  André

• Is it possible to increase the internal storage or external on an iPhone?

  Can yo add internal or external memory to an iPhone?

  Is not possible.

  If you need to free up storage space, help here > http://www.huffingtonpost.com/2015/01/08/iphone-free-space-tips_n_6269756.html

• Need to increase the internal storage

  Got bike E, downloaded a few apps, now my bike E is obtained more slowly in spped, takes time to pen apps and internal memory is almost full. only 70 MB is free.

  I think I need to make free internal memory, I already changed photos and songs outside please help me to do internal free memory without losing data or the app

  Bro. Go to settings > storage where you can check the amount of data misc and cache the data you have. Remove data from the cache from there (you will do no harm, but to free up space), you can even watch the space occupied by the various files (data here)... remove the they are useless. If you have a crowded Gallery, you will have a very large folder thumbnail (I hope you know what are the photos?). Tiles contain a form compressed each picture that has ever existed on your device. Try to remove the thumbnails of the images already deleted. Should free up some space. In addition, use the file Explorer ARE to remove the pictures because it is the fastest... also the thumbnails folder is hidden.

• How can I get Windows Server 2012 Essentials recognize my HARD drive when you turn an external HARD drive in a drive HARD internal storage?

  I recently had a pool of storage space using 3 external drives USB 3.0 in Windows Server 2012 Essentials.  I decided to take the readers out of the enclosure and connected directly to the internal SATA connectors on my motherboard.  When the server was launched upward, these 3 discs now display as disconnected in storage.

  When I do the command 'get-disc' physical in PowerShell, the drives appear as "drives physical 1,2 & 5" and are 2.72 to each. "."  But it also lists disks Seagate Expansion as well, with a status of "communication lost".  These are the same three disks that are now internal.

  Nothing has been deleted or erased, so all the data is still on each individual unit and assume that if I managed to put back them in the external enclosure, would immediately online.  I thought that everything simply moving them to a new HARD disk controller (internal SATA USB) would not cause the pool to drop the readers, they are always connected to the same server.

  Is there a way to get storage space to see and read the 3 internal drives to bring my pool/area back online without losing any data?

  Server experts are found in the forums below.  The forum you are now is for questions to the consumer of Windows, not Windows Server issues:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Album App do not display images of internal storage

  Hello
  I use a ultra Xperia Z

  I always have problems with my album app, it shows no content from the internal memory, but only from SD card. I tried to clear the cache of data and restarted the phone, but it does not help. I recently updated my OS to lollipop 5.1.1 it worked once, but as soon as I plugged the phone on the laptop it stopped to show the content of the internal memory. He gave me problems even if you use 4.4.2

  The version of the album App is 7.3.A.0.4, please make a permanent fix because it's very annoying to have to go through the file Commander to display images from the internal memory.

  Thanks in advance

  When you try to change something on the external SD card using advantage 3:rd app, you must allow access to the application.

  In Total Commander you have to get a popup saying 'Write protected!', then press 'OK', then select the SD card on the left side menu och then press "confirm" at the bottom. Total order then deletes the file.

  And when the file has been deleted, don't forget to erase the data to storage media and then reboot the phone. It can also take a little while for the phone to analyze all of the media, which may take a little while before, you see all the pictures.

  Which you must use the file manager is a matter of preference. You can have both installed if you want to.

• Work Dbma_scheduler execution of procedure which loops through all the customer drawings in the rear rollers database transaction in case of exception

  Hello

  Need your contributions on the approach to implement a work using dbms_scheduler.

  We have about 2000 drawings. Each schema has a package with 2 procedures.

  The requirement is to create a single job in SYS that loop over each schema and run the procedures specific to a time (once a day) and send a notification by e-mail on success or failure.

  Working script:

  BEGIN

  dbms_scheduler.create_job (job_name = > 'LOAD_EACH_SCHEMA_AUDIT_DATA',)

  job_type = > 'PLSQL_BLOCK ',.

  job_action = > ' BEGIN sys.p_loadaudit;

  END;',

  start_date = > systimestamp,

  repeat_interval = > ' FREQ = MINUTELY; RANGE = 1',

  number_of_arguments = > 0,

  enabled = > true,

  Comments = > "Use repeat interval is every five minutes");

  END;

  /

  Note: to test the end I put him repeat interval to carefully.

  Use of procedure must be running:

  Procedure sys.p_loadaudit:

  CREATE OR REPLACE

  PROCEDURE p_loadaudit

  AS

  v_count NUMBER: = 0;

  lv_error_message VARCHAR2 (4000);

  vstmt VARCHAR2 (4000);

  BEGIN

  I'm IN

  (SELECT username FROM dba_users WHERE username LIKE '% ABCFIRM')

  )

  LOOP

  vstmt: = "begin" | i.UserName | '. pkg_audit_info.p_load_coa; end;';

  EXECUTE immediate vstmt;

  vstmt: = "begin" | i.UserName | '. pkg_audit_info.p_load_am; end;';

  EXECUTE immediate vstmt;

  END LOOP;

  EXCEPTION

  WHILE OTHERS THEN

  lv_error_message: = ' error in procedure p_loadaudit: ' | SQLCODE. "- ERROR -" | SUBSTR)

  SQLERRM, 1, 300). '*' || dbms_utility.format_error_backtrace;

  raise_application_error(-20002,lv_error_message);

  END p_loadaudit;

  /

  Example of a scheme: SCHEMA_01

  create or replace

  PACKAGE pkg_audit_info

  AS

  CursorType type

  IS

  REF

  CURSOR;

  PROCEDURE p_load_COA;

  PROCEDURE p_load_AM;

  END pkg_audit_info;

  /

  create or replace

  Pkg_audit_info body PACKAGE

  AS

  PROCEDURE p_load_COA

  AS

  BEGIN

  INSERT INTO TABLE1();

  EXCEPTION

  WHILE OTHERS THEN

  lv_error_message: = ' error in procedure pkg_audit_info.p_load_COA: ' | SQLCODE

  || "- ERROR -" | SUBSTR (SQLERRM, 1, 300). '*' || dbms_utility.format_error_backtrace;

  RAISE_application_error(-20002,lv_error_message);

  END p_load_COA;

  PROCEDURE p_load_AM

  AS

  BEGIN

  INSERT INTO TABLE2();

  EXCEPTION

  WHILE OTHERS THEN

  lv_error_message: = ' error in procedure pkg_audit_info.p_load_AM: ' | SQLCODE.

  "- ERROR -" | SUBSTR (SQLERRM, 1, 300). '*' || dbms_utility.format_error_backtrace;

  RAISE_application_error(-20002,lv_error_message);

  END p_load_AM;

  END pkg_audit_info;

  /

  Table1 and table1 exist in schema_01.

  All 2000 patterns have same package.procedures.

  For security reasons, I removed the actual code.

  I was able to complete the task successfully. However, when a scheme procedure (SCHEMA_01.pkg_audit_info.p_load_COA) throws an exception, the job fails, and any transaction is rolled back.

  Is it possible to loop through each schema and run the corresponding procedures. Even if the exception occurs, it must restore only for this scheme and continue other patterns in the loop?

  Please let me know if there is a better way to do this. Is the way I'm handling exceptions in the work or the correct procedure?

  Thank you

  Hello

  RAISE_APPLICATION_ERROR will cause the program to exit to the appellant, even if you put it inside a block in the loop, so the statement RAISE or RAISE_APPLICATION_ERROR must be placed in your procedures 'pkg_audit_info.p_load_AM' and 'pkg_audit_info.p_load_coa '. In this way, you can use a block inside the loop and the error in the log.

  I'm IN

  (SELECT username FROM dba_users WHERE username LIKE '% ABCFIRM')

  )

  LOOP

  BEGIN

  vstmt: = "begin" | i.UserName | '. pkg_audit_info.p_load_coa; end;';

  EXECUTE immediate vstmt;

  vstmt: = "begin" | i.UserName | '. pkg_audit_info.p_load_am; end;';

  EXECUTE immediate vstmt;

  EXCEPTION

  WHILE OTHERS THEN

  --> Set the error in a table of otherwise custom event log you won't know what happened for this scheme: don't forget the user name

  END;

  END LOOP;