ColdFusion data source for jqGrid

Similar Questions

• ERROR: Cannot open the data source for the user

  Hello, I followed the instructions in the URL below
  
  http://gavinsoorma.com/2010/02/GoldenGate-installation-Oracle-11g-on-Red-Hat-Linux/
  
  and I get the ERROR: cannot open the data source for the user
  
  I run the sql for the role but nothing
  
  any ideas please.
  
  Sun solaris operating system
  database version 9.2.0.7

  Previous question that you were:
  Where did you get the GoldenGate for Oracle 9i software?

• Error the server behavior requires a ColdFusion Data Source

  I'm probably way behind you all, but I make the shot the book ColdFusion 8 and Chapter 4 tutorial. He tells me to link by clicking the sign + on link, then the message: this server behavior requires a Data Source ColdFusion please check the database for more information on how to create a.
  When I do I go to the administration and the cfartgallery data source tool is all ready and I can check it out and get the OK
  The book is "web application construction Kit Volume1 for Coldfusion8.

  I don't know what else will explode, but I looked at the display of the address and it was empty. When I added Art.cfm and click on the + I got the screen the tutoral asked? Off, I again.

• Report Builder 1.0 will not connect to the data source for Reporting SERVICES

  We have a few users who are unable to connect to SSRS on SQL Server 2008 using the Report Builder version 1.0

  (We will be updating soon, but it's a slow process, and now users have questions)

  Instead of disputed for their IDs, they are requested to select a data source.  This information is supposed to be filled automatically when the user starts the Reporting SERVICES report designer.

  Does anyone know where/how SSRS communicates information to start the application with one click Report Builder, and where, if anywhere, it stores?

  Hello

  The following forum seems most appropriate for your question:

  https://social.msdn.Microsoft.com/forums/en-us/home?Forum=sqlreportingservices

  You can get a faster response there.

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• Should we use the same data source for the internal connection and Save Point?

  Hello
  
  Configuration of AM has an internal connection location db, adf - config.xml has also a Save Point db connection parameter, should we are all set to the same source database of the system or should create us a separate data source that is used only for the connection internal db AM of Save?
  
  jdev: 11.1.2.1
  
  Thank you very much!

  Hello

  its everything to you and you have security concerns if the backup point is registered with the business data.

  Frank

• Failed to configure the data source for EPMA in 11.1.2.3

  I'm updating 11.1.2.1 to 11.1.2.3 via update on Windows 2008 R2 64 bit
  
  4 .NET installed.
  
  I get the below error.
  
  [2013 05-13 T 17: 21:45.375 - 04:00] [EPMCFG] [ERROR] [EPMCFG-07303] [oracle. EPMCFG] [tid: 20] [ecid: 0000JuVlEW8Fw000jzwkno1H ^ L ^ ^ 000004, 0:138] [SRC_CLASS: com.hyperion.awb.config.AWBDBConfigurator] Oracle Data Provider for .NET entry does not exist in C:\Windows/Microsoft.NET/Framework64/v4.0.30319/CONFIG/machine.config, install it before configuring the repository of EPMA
  [2013 05-13 T 17: 21:45.375 - 04:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle. EPMCFG] [tid: 20] [ecid: 0000JuVlEW8Fw000jzwkno1H ^ L ^ ^ 000004, 0:138] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] error: []
  com.hyperion.cis.config.ProcessingException
  at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:145)
  at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:650)
  at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:296)
  at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:92)
  at java.lang.Thread.run(Thread.java:662)

  In accordance with the exception.
  *

  Oracle Data Provider for .NET entry doesn't exist 
  

  *

  ODP for .net is required by EPMA dimension server, which you can find here-->

  http://www.Oracle.com/technetwork/database/Windows/downloads/utilsoft-087491.html

  Thank you
  hyperionEPM
  Please check the answers as useful or correct for others to find them easily

  Published by: hyperionEPM on May 14, 2013 20:17

• Samsung Galaxy Tab 2 prints only the data source for HP 6700 not complete document

  I can get a printed message from my Samsung Galaxy Tab 2 to my HP 6700 tablet, but... If I try to print, for example a recipe from foodnetwork I can't get a message printed in the 6700 which gives me the source of the Web page, not the recipe for the competition.  I can print from my iPhone just fine using the @hpeprint e-mail address.  I downloaded the app store Eprint and it works, the problem is that I'm just this gibberish.  Can you help me?

  I think that the way android 'sharing' web pages is just giving the url to the Web site. If you had to share this link with a handles specifically, html app like google chrome, it would launch the site. This makes things much faster when you share only a link and not all the data on the page.

  How works the ePrint application is it actually makes the Web page using HP servers in to a PDF and then send it to the printer. That's why it prints without any problems from there.

  On the new phone from Samsung, the Galaxy S4, it built in the printing of some of the applications by default for HP printers, but it doesn't look like this is available on this unit.

• Web data sources for E-mail groups

  Hello

  I am struggling to find how to do a Web database search for groups of emails that someone is attached to. This Post mentions that you can ""display a specific web page visitors in a group of email "so I guess it's possible. "

  
  

  I'll build a custom update details of preference/Customer Center and is the last piece of the puzzle!  Very eager to get it figured out
  

  During my research of data generation:

  Contacts does not work as I can't add e-mail groups to a Contact view

  It doesn't seem to be in the data of visitors

  For objects Object Records/Custom Custom - should I create and update the custom object whenever I update the Email Group subscriptions? Seems an inelegant way to go about this...

  A contact group - a contact group membership doesn't seem to be the same as a group of e-mail? Or am I wrong on that?

  Any help appreciated

  See you soon

  Sandie

  I have now finally got it working!

  Under settings > Setup > site > I have created a list of choices 'Belonging to a Group Contact' and grabbed the scripts in database search Options, Web data search

  The GUID I used were found under settings > Setup > assets > Email groups - click on the small "i" beside the name to get looking for list of subscription data

  Yay!

  This post helped me a lot: example script to fill the checkbox in the form Eloqua10.

• IOM 9.1.0.2 - Multi Weblogic JDBC for Oracle RAC Data Sources

  IOM-IOM 9.1.0.2 BP07 supports Weblogic JDBC Multi Data Sources (Services > JDBC > Multi Data Sources) for Oracle RAC instead of insert the "Oracle RAC JDBC URL" on xlDS and xlXADS JDBC Data Sources (Services > JDBC > Data Sources > xlDS | xlXADS > survey login > URL)?
  If so, are there any other changes that must be made on IOM, or simply to change data sources?

  Yes, it is supported. You install against a single instance directly of the Rac server. Then you update the file config.xml and jdbc resources in your server weblogic with the full address of rac. It is documented for installation against CARS. http://docs.Oracle.com/CD/E14049_01/doc.9101/e14047/database.htm#insertedID2

  -Kevin

• 11g - why is it not add processes for multiple roles in new data sources?

  Anyone want to guess why Oracle chose to add roles both in the allocation of privileges to new data sources? If I have 40 different roles and add a new data source, I have to manually add this data source for each role, one at a time, 40 times. Horribly inefficient. Why?

  When you change the new data source (click on the data source), you have the option: "Move All" available to 'Authorized roles' roles under the security heading. Have you looked at this option? (Admin - Data Sources) and not passing is not by Admin-> roles and permissions...

  or have I misunderstood your question?

  Thank you
  BIPuser

• Cannot create the data source to SQL Server

  Hi people,

  I am running IIS, Windows XP SP3, SQL Express 2005, Trial Version of ColdFusion 9 (no patches).

  The administrator using ColdFusion, when I try to create a data source for SQLExpress 2005 (SQL Server Express), by using the SQL Server driver, I get the following error:

  Connection verification failed for data source: AMT
  java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] the requested instance is not valid or is not running.
  The root cause was that: java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] the requested instance is not valid or is not running.

  The "instance", which I interpret as meaning the database instance, is "machinename\SQLExpress" (it is a so-called "named instance").  That's what I enter in the "Server" field of the display (data & Services-> sources-> Microsoft SQL Server).

  However, I am able to create an ODBC data source name in Windows using the driver Microsoft SQL Server Native Client Version 09.00.3042 and the same instance, "machinename\SQLExpress".

  Does anyone have any ideas as to what is wrong?

  Try to use the domain name TCP/IP (or IP address) and port instead of the info of the connectivity of Windows style.  You may need to enable TCP/IP as a network on the DB server protocol well (I think it is disabled by default on SQL Express Ed).

  --

  Adam

• Simple example of a combobox control displays data in a CF data source

  Can someone tell me a simple example of a Flex 3 combobox that displays data from a ColdFusion data source?  I can't find a simple example.  As always, thank you!

  I'm sure that's what you're looking for

  http://blog.tygate.com/?p=463

• Storage of the client in the SQL data source fails all of a sudden

  After performing several Windows 2008 security updates last night, one of the sites started throwing errors related to access to the client storage database, which is the default value as defined by the CF Administrator:
  coldfusion.runtime.ClientScopeDBException: operation failed on the source of data DATA source NAME.
  Reason of failure java.security.AccessControlException: access denied.
  
  Most of our sites use this data source for storage of client, and none of them have the problem.
  Editing the file Application.cfm to use clientstorage = "cookie" got the site up.
  I then added a NEW data source to the list of storage Client and set the Application.cfm file to use instead.
  This works. As sson as I remove the Application.cfm file clientstorage attribute, the site breaks.
  Short to reboot the server (which happened last night after the updates), I restarted IIS all related services.
  Any ideas?

  Java security error, huh? You know, I had missed that in your first note. (He says he is, "reason for failure java.security.AccessControlException: access denied".)

  I'm starting to wonder now: what is a CF Enterprise Deployment? It is configured (in the CF Admin) to use what is called "Security Sandbox"? If so, the problem might be that this one app is in a sandbox that has not been configured to access the DSN. Sandboxes are configured for all code running in a given directory (and its subdirectories), which would explain this work for everyone, but this one.

  Purging of customer data is quite drastic, if data are important for your application. I recommend you try this if you have a little more time.

  If you're reading this I would like to learn more about Sandbox security, in addition to the docs, you can read more in some articles that I did for the Dev Center a few years previously, to http://www.adobe.com/devnet/security/articles/sandbox_01.html and http://www.adobe.com/devnet/security/articles/sandbox_02.html. While it was written in the period of CF6, it still applies to the 7 and 8.

• Data source

  Hi guys,.

  Is it possible to create the HFM (Hyperion Financial Management) data source OBIEE report?

  Also, is it possible to use the report smartview as source of data as Excel type?

  Thank you

  Hello

  Yes, HFM is a source of support for OBIEE (OBIEE 11 g only, on 10 it was did not support).

  OBIEE uses SMA driver to get the structure of metadata of HFM, take a look at a few additional parameters: http://docs.oracle.com/cd/E28280_01/bi.1111/e10540/datasource.htm#BIEMG1366

  There is also a tutorial with step by step how to use it: creating tables of management in Oracle BI Enterprise Edition 11 g

  'report smartview as source of data as Excel type': you want to use Excel as a data source for OBIEE and Excel is filled / updated using SmartView?

  Well... Yes... but...

  The Excel need to have data in the file itself, it will only run a refresh of smartview / recover when OBIEE needs to get data, so in the end, it's just a static file Excel and someone need to refresh the Excel when required.

• Table 'dbc_user' in the descriptor of the item: 'user' does not exist in a space of accessible table by the data source.

  In my development environment, when I run the production server, I get the following error in the server.log. I have configured the data source for the production. I use ATG 10.1. Please help solve this problem. Here are the logs

  22:46:45, 765 full repository INFO [ProfileAdapterRepository] SQL boot

  22:46:45, 988 full repository INFO [AdminSqlRepository] SQL boot

  22:46:45, 990 Initializing INFO [AdminAccountInitializer] account database/atg/dynamo/security/AdminAccountManager of/atg/dynamo/security/SimpleXmlUserAuthority

  22:46:46, 450 ERROR [ProfileAdapterRepository] Table 'dbc_user' in the descriptor of the item: 'user' does not exist in a space of accessible table by the data source.  DatabaseMetaData.getColumns returns without columns.  Catalog = null Schema = null

  22:46:46, 466 WARN [ProfileAdapterRepository] atg.adapter.gsa.GSARepository-> loadColumnInfo: SQLException in Table.loadColumnInfo.  Try again.

  com MySQL.JDBC.exceptions.jdbc4.MySQLSyntaxErrorException: Table 'atgcoredb.dbc_user' does not exist

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:525)

  at com.mysql.jdbc.Util.handleNewInstance(Util.java:407)

  at com.mysql.jdbc.Util.getInstance(Util.java:382)

  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1052)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3603)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3535)

  at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1989)

  at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2150)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2620)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2570)

  at com.mysql.jdbc.StatementImpl.executeQuery(StatementImpl.java:1476)

  to com.mysql.jdbc.DatabaseMetaData$ 7.forEach(DatabaseMetaData.java:3966)

  at com.mysql.jdbc.IterateBlock.doForAll(IterateBlock.java:51)

  at com.mysql.jdbc.DatabaseMetaData.getPrimaryKeys(DatabaseMetaData.java:3950)

  at atg.adapter.gsa.Table.loadColumnInfo(Table.java:1926)

  at atg.adapter.gsa.GSARepository.loadColumnInfos(GSARepository.java:7534)

  to atg.adapter.gsa.GSARepository$ 1.run(GSARepository.java:5431)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:603)

  at java.lang.Thread.run(Thread.java:722)

  22:46:46, 467 WARN [ProfileAdapterRepository] unknown JDBC type for property: businessAddress, element type: user. Make sure that the column names in the database and match model.  The business_addr column is not found in the set of columns returned by the database: {} for this table.

  22:46:46, 470 ERROR [ProfileAdapterRepository] Table 'dbc_buyer_billing' in the descriptor of the item: 'user' does not exist in a space of accessible table by the data source.  DatabaseMetaData.getColumns returns without columns.  Catalog = null Schema = null

  22:46:46, 470 WARN [ProfileAdapterRepository] atg.adapter.gsa.GSARepository-> loadColumnInfo: SQLException in Table.loadColumnInfo.  Try again.

  com MySQL.JDBC.exceptions.jdbc4.MySQLSyntaxErrorException: Table 'atgcoredb.dbc_buyer_billing' does not exist

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:525)

  at com.mysql.jdbc.Util.handleNewInstance(Util.java:407)

  at com.mysql.jdbc.Util.getInstance(Util.java:382)

  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1052)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3603)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3535)

  at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1989)

  at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2150)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2620)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2570)

  at com.mysql.jdbc.StatementImpl.executeQuery(StatementImpl.java:1476)

  to com.mysql.jdbc.DatabaseMetaData$ 7.forEach(DatabaseMetaData.java:3966)

  at com.mysql.jdbc.IterateBlock.doForAll(IterateBlock.java:51)

  at com.mysql.jdbc.DatabaseMetaData.getPrimaryKeys(DatabaseMetaData.java:3950)

  at atg.adapter.gsa.Table.loadColumnInfo(Table.java:1926)

  at atg.adapter.gsa.GSARepository.loadColumnInfos(GSARepository.java:7534)

  to atg.adapter.gsa.GSARepository$ 1.run(GSARepository.java:5431)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:603)

  at java.lang.Thread.run(Thread.java:722)

  22:46:46, 471 WARN [ProfileAdapterRepository] unknown JDBC type for the property: myBillingAddrs, element type: user. Make sure that the column names in the database and match model.  The addr_id column is not found in the set of columns returned by the database: {} for this table.

  22:46:46, ERROR 611 [ProfileAdapterRepository] Table 'dbc_org_billing' in the descriptor of the item: "organization" does not exist in a space of accessible table by the data source.  DatabaseMetaData.getColumns returns without columns.  Catalog = null Schema = null

  22:46:46, 611 WARN [ProfileAdapterRepository] atg.adapter.gsa.GSARepository-> loadColumnInfo: SQLException in Table.loadColumnInfo.  Try again.

  com MySQL.JDBC.exceptions.jdbc4.MySQLSyntaxErrorException: Table 'atgcoredb.dbc_org_billing' does not exist

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:525)

  at com.mysql.jdbc.Util.handleNewInstance(Util.java:407)

  at com.mysql.jdbc.Util.getInstance(Util.java:382)

  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1052)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3603)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3535)

  at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1989)

  at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2150)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2620)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2570)

  at com.mysql.jdbc.StatementImpl.executeQuery(StatementImpl.java:1476)

  to com.mysql.jdbc.DatabaseMetaData$ 7.forEach(DatabaseMetaData.java:3966)

  at com.mysql.jdbc.IterateBlock.doForAll(IterateBlock.java:51)

  at com.mysql.jdbc.DatabaseMetaData.getPrimaryKeys(DatabaseMetaData.java:3950)

  at atg.adapter.gsa.Table.loadColumnInfo(Table.java:1926)

  at atg.adapter.gsa.GSARepository.loadColumnInfos(GSARepository.java:7534)

  to atg.adapter.gsa.GSARepository$ 1.run(GSARepository.java:5431)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:603)

  at java.lang.Thread.run(Thread.java:722)

  22:46:46, 612 WARN [ProfileAdapterRepository] unknown JDBC type for the property: myBillingAddrs, element type: Organization. Make sure that the column names in the database and match model.  The addr_id column is not found in the set of columns returned by the database: {} for this table.

  You want to run the B2BCommerce module? If so, then you must run the $dynamo_home /... / B2BCommerce/SQL/db_components/MySQL/b2b_user_ddl. SQL ddl because you are missing the B2BCommerce tables. If this isn't the case, you will have to redo without the B2BCommerce module.

  Thank you

  Joe