Collapse of the computer

Similar Questions

• My scaner collapsed since my computer was on the repair shop

  My scanner no longer works since my computer was in the repair shop

  Hi Juan,

  1. What is the brand and model of the Scanner?

  2. do you get an error message when you try to scan?

  3 is the Scanner not get properly connected to the computer?

  The scanner may not work because of the following reasons:

  a: The scanner is not properly connected to the computer.

  b: Windows Fax and Scan service does not.

  c: Malfunction of the equipment.

  d: Software conflicts

  Click on the link mentioned below some troubleshooting common operations to scan and see if it helps.

  http://Windows.Microsoft.com/en-in/Windows-Vista/Troubleshoot-scanning-problems

  Note: This also applies to Windows 7

  Good day!

  Answer please if you have any questions.

• Gradual of Windows or the complete collapse of the image of the window

  I don't know what causes a collapse of the image of the full window.  To stop and restart the computer.  It doesn't happen all the time but is there someone who can help.

  Hello

  If the screen starts to break up and becomes pixelated, which is normally a sign of corrupt graphics drivers or graphics hardware fault.

  Access the site on your computer or the manufacturer of the graphics card > drivers download Section > then key your computer or graphics card model number (depending on where you looked it upward) > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  _______________________________________________

  If the problem persists, it then seems to be the graphics hardware.

  Monitor > cable > Port > that is either connected to a graphics card in a slot on the motherboard or integrated graphics hardware that is part of the motherboard.

  Make sure that the cable is tight at both ends.

  If a desktop computer, or share your graphics card with a good.

  Or, if graphics card built-in, you will need to install a graphics card in a slot of the motherboard to see if this solves the problem.

  When a laptop; If under warranty, contact the manufacturer.

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• Node of collapse during the R12 upgrade

  Hi all
  
  I have a question regarding the collapse of one of our nodes of E-Business.
  
  Our current environment is 11.5.9.2. Web/forms are on one W2003 node and "everything else" is on since the HP - UX node. Due to changes in our business, we look at the whole of the application running on a node, our HP - UX server. Of course, we would like to test this out first to make sure that no problem of performance.
  
  My question: in the 11.5.9.2 > R12 upgrade process, you run rapidwiz. Rapidwiz ask you what components are on which node. I think it should be possible to remove our W2003 node during upgrade (process rapidwiz). Rapidwiz should create services http, etc. on HP - UX and we should be ok? Good or bad?
  
  Thank you all... colin

  Colin,

  You must move the components you have on Windows server to the node in HP - UX (as shown (Note: 238276.1 - migration to Linux with the Oracle Applications 11i version) before you start the upgrade that you already have files on the Windows node and install quickly running during the upgrade isn't enough.)

  I think that your approach is not supported, you can check with the support of Oracle.

  Note: Please make sure that you have enough resources on the computer from HP - UX and test the performance before proceeding with this plan.

  Kind regards
  Hussein

• Synchronization and backup from iPad to the computer using iTunes

  Since the last update, last week, did someone else with problems of synchronization/backup of their Air iPad with their computer via iTunes?  iPad OS 10.0.2, iMac OS X Lion 10.7.5 Air (updates is no longer available for this computer). I had no problem before this last update.  -Pop-up message on the computer: "iTunes could not connect to the iPad...". my name... because an invalid response was received from the device. ' Pop up message on the iPad at the same time: "trust to this computer?  Your settings and your data will be available from this computer when connected.  "Option click on TRUST or don't trust.   I clicked on the TRUST several times without success.  Please help me if you can.  Thank you.

  There is no alternatives that save to iCloud instead of it, or upgrade your software and/or hardware to run a newer version of iTunes.  iOS 10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.

• We went to MacOS Sierra of El Capitan and now have to log in twice, when we start the computer.

  We have upgraded to Mac OS Sierra of El Capitan, and now we have to log in twice, when we start the computer.

  How fix us this?

  Thank you...

  All the best...

  God bless...

  If you have activated the preferences-> Security-> FileVault system, then you must enter your password initially so that device drivers can decrypt your encrypted drive.  Once the system is running, you must then log into your account.

  They are really 2 separate activities that happen just to use the same password.

• Cannot move photos to the computer after the upgrade to iOS10

  Yesterday my iPhone updated to iOS 10 and now when I plug my phone into my PC (HP m6w103-dx / Windows 10 / iTunes 12.5.1.21) the computer will ba - beep once iTunes sync, charge the phone but I no longer have access to the photos via Windows Explorer folder.  The phone does not appear in Windows Explorer and I don't get the second ba - beep that normally, I had before the upgrade.

  I restarted the phone and the computer, then tried again with no luck.  I myself have sent pictures that were on my phone, deleted all of them film, then took some new pictures and tried again.  Still no luck.  Help!

  Your post is the 4th now ask about the same problem. One user solves the problem by connecting the phone to a different USB port on the computer. You might want to try it.

• IOS 10.0.1 and 12.5.1 to Windows 7 iTunes, the iPhone no longer appears as a device on the computer when I plug it, even if it syncs very well

  IOS 10.0.1 and 12.5.1 to Windows 7 iTunes, the iPhone no longer appears as a device on the computer when I plug it, even if it syncs very well. That's how I used to synchronize and access my photos from my phone to my PC.

  * Is there a way to make the phone reappear?

  * Is there a different way recommended to synchronize the pictures from the phone directly to a PC? I don't want to use iCloud.

  Thank you!

  ITunes still recognizes your iPhone? If not, try to follow this link: If iTunes does not your iPad, iPhone or iPod - Apple Support

  or you can also contact apple support contact Apple for support and service - Apple charge for assistance

• Ok. so, when I sync my music to the ipod, it can read my computer to play, but it is not recognized as the device when I unplug it from the computer.

  my ipod plays only a few original downloads on my sound surround of boise, but the most recent downloads will only record and play on my computer. When I download music it synchronizes and can be found and played back on the computer but is not found on the actual screen of the ipod to play my biose surround sound, but there is space on the ipod.

  If you wait for the new songs (in your iTunes library) to automatically synchronize to the iPod, it must be configured to use automatic synchronization (setting synchronization music ).  Select iPod in iTunes by clicking on its button on the device.  For current iTunes, the screenshot below shows top left corner my iTunes, iPod touch window circled in red.

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, the music from the iPod settings screen.  Check mark for Sync music box (if it isn't already)

  NOTE: No matter what songs on iPod that are not in your iTunes library (on computer) will be lost.

  This enables automatic synchronization.  You can choose to synchronize the entire music library (if it fits on the iPod) or a part of the selection .  Implement this screen as you want, and then click apply.  Further, iTunes automatically keeps iPod "in phase" with the changes to your music library (or the selected part of it) when you connect the iPod (or click sync , if already connected).

  If this isn't your problem, please post back with additional details.

• Why Apple does not provide a 10 W charger with the air of the iPad 2 when the barn of the computer and hundreds of people on the web say he needs a 12 W charger because Apple has changed their software and 10 W very slow iPad charges.

  Why Apple does not provide a 10W for I pad air 2 charger when the barn of the computer and hundreds of people on the web say that the 10 W does not work and it takes a 12 W charger.  Burning of the computer told me that Apple has changed their software on the iPad and now requires a 12 W charger.

  So you're claiming Apple is selling iPads with a charger that doesn't work?

  A charger 10W works perfectly well. A 12W charger can be slightly faster to load under certain conditions.

• Adjust the brightness of the keyboard of the computer instead of the keyboard?

  Yesterday, I spilled some coffee on my keyboard and the computer works well, but my keyboard does not work.  I bought a wireless keyboard to use and it works perfectly, except that the keyboard of my laptop backlight is always on.  I can't figure out how to turn off without using the f5 and f6, keys that don't work on the laptop, so how can I disable this light without using the keyboard?  F5 and f6 don't work on the original keyboard at all, and on the outside, they do not work to adjust the brightness.

  Try this:

  Go to system-> keyboard Preferences, and in the keyboard tab, disable(uncheck) automatically "illuminate the keyboard in the dark.

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• The power button will not turn on my computer. Is there a way to solve this problem, or the computer not sleep once I do back on?

  I have a MacBook Pro 2011.

  The power button does not turn the computer on when the computer goes to black screen.

  The battery he is

  iI tried to Community assistance to research and tried to wait. The next morning, I was able to turn it back on. Now, it happened again.

  Please help me. I can afford a new Mac.

  Thank you

  Get it fixed. Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple.

• change the name of the computer

  I gave my computer to my friend. It has the name changed. OS X.11.6.

  I assume you are talking about changing the name of the computer you want to actually change the name of the account.

  Change the name of the OS X user account and the name of folder on your Mac - Apple Support

  Hope this helps, good luck to you.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...