Color HP LaserJet Pro 200 printer M251n Imaging drum

Similar Questions

• Multifunction color HP LaserJet Pro 200: printer HP LaserJet bleeding in the pages

  Well, so a few months ago our printer started printing with strange faded color smear on the pages. Very subtle at first, but it has progressively worsened over the months, and now it covers almost the page:

  http://i655.Photobucket.com/albums/uu275/zzzz4444/HP.jpg

  It is magenta on one side of the page and orange-ish on the other. I tried to manually run a Page several times cleaning, cleaning things, replacement of cartridges, replacing the transfer roller, and calibrate the color cartridges, which none shows any significant improvement. Does it also on the print side of the paper, and it seems that the toner is leaking on the transfer roller mainly (on the edges, but also on the rest of the roll).

  Any ideas/suggestions?

  It seems that as faulty toner cartridges, are you using the new HP cartridges?

• Multifunction color HP LaserJet Pro 200: printing problems - Full black pages!

  My printer has suddenly started printing totally black pages - new black toner cartridge a month ago.

  Do you still have the old toner cartridge. It could be the toner so if you can try another good cartridge. I also have to remove and reinstall the black toner cartridge.

• Color HP LaserJet Pro 200 M252: clearing the jammed paper

  Printed paper is stuck between the back door of the printer and the output area and is not reachable to clear for further printing.   I can't access this area.  How can it be erased successfully.

  Hi @trevorat10 ,

  By your post, I see that you have a paper jam from the rear door of the printer and the output area. Want to know how to remove it. I want to help you solve this problem.

  I'm sorry, but I can't find a color HP LaserJet Pro 200 M252.

  When the printer was purchased?

  You may color HP LaserJet Pro 200 M251 model?

  Please call our technical support at 800-474-6836 if the printer is still under warranty for assistance. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great day!
  Thank you.

• Color HP Laserjet Pro 200 M251n does not in Sleep Mode

  Printer: HP color Laserjet Pro 200 M251n

  Firmware: 2014-06-04, Version 20140521

  Problem:

  Since the last update Firmware the printer does not sleep/wake no event (all configured to wake up the printer) will wake up the printer. Even to connect via Webinterfac the printer does not respond. Ping also fails.

  Tried to connect the printer to the printer ports / wall plug changed network cables nothing worked.

  The only solution is to reset the printer (power off / on) to get the printer working again.

  Played a bit with the EcoSmart configuration, but little matter what is selected it its always the same as the printer stuck sleep/sleep mode and don't responde.

  Y at - it somewhere the old FIrmware to download to try a downgrade if it would help?

  I really don't think there is anythink else I could try.

  just to confirm that the last Firmware update solves the problem

  If I remember correctly it when, one day in December when it came out

• Multifunction color HP LaserJet Pro 200: HP LaserJet Pro 200 color MFP M276nw on El Capitan: Scan does not

  Since my upgrade to El Capitan my USB connected HP LaserJet Pro 200 M276nw MFP color analysis no more.

  What I've tried so far:

  Installed the latest drivers > unsuccessfully

  Tried all the solutions suggested here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-LaserJet-Pro-200-color-MFP-M276nw-Scanni... > no success

  Have any suggestions what to do next?

  Update: the solution provided in this thread solved my problems:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-LaserJet-2300-not-working-with-El-Capitan/m-p/5281267/highlight/true#M61077

   

• Multifunction color HP LaserJet Pro 200: problem error 79

  HP LaserJet Pro 200 color MFP M276nw that has error 79 when the woman made an impression. I downloaded the firmwear date, but is not complete installation eventhough the poster 100% progress. Print has only 400 pages printed since new. Need help

  You must click on the link below and download the firmware update file and then run it and follow the instructions.  It is usually sufficient to tell the app what printer to update and it does from there.  Takes only a few minutes.

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-Pro-200-color-MFP-M276/5097648/model/5097653#Z7_3054ICK0K8UDA0AQC11TA930O2

• LASERJET PRO 200: PRINTER FAILURE

  I have a laserjet pro 200 which is printing in black only, pages when we asked to be printed in color that the background is printed in black only, the pages are not white. Can you helt me with this problem.

  Thank you

  Sergio

  Hi sergio,

  In the front panel of the printer, select Setup > reports > supplies Status Report.

  You find any printer color on this worksheet as expected?

  Please let me know the retults

  So try printing from other applications on your PC (e.g., Word, Wordpad)... you can see no difference?

  Is there any specific program you are printing from or any program you use?

• Color HP Laserjet Pro 200 M251: HP Laserjet Pro 200 M251nw print pdf with OffBeat foot

  Printing documents PFD with the quirky footer al the way to the top.

  Print the pdf as image only pages, then the foot rest where it belongs.

  Hi @Martinkoopman,

  Welcome to the Forums of HP Support! I see when you print pdf documents to your HP LaserJet Pro M251nw Color it prints with the footer moved all the way to the top.  If you print as an image only it remains where it requires.

  1. what program you are using to print PDF files from?

  2 have you tried to update the program?

  3. this happens in all programs or just one?

  I would like to run you HP print and scan doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  What are the results? I'll watch for your reply.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution". If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• Color HP LaserJet Pro 200 M251nw to print alignment

  Images and text color print out of alignment.

  The problem started the first day that we had the impression.  It took me a while to get into this diagnosis, but I tried the following:

  I tried to replace the (expensive) with new toner cartridges.  The problem is even with the original Starter cartridges.

  I tried a reset of the complete printer.

  I tried to let the printer disconnected from the power supply for 24 hours.

  I tried several features alignment in the printer menu.

  Print black only is fine.  All other colors do not align between them or with blacks.  Creates a kind of 3D - ish into effect.

  The quality of printers report displays all colors fine areprinting, but not aligned with each.

  I have included scans of part of a rainbow impression that illustrates the displacement as well as the quality report page.

  

  

  Thanks for letting me know James_LAG.

  At this point, it looks like a hardware problem with the printer. Please call our technical support and you learn about a replacement printer, to 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

  Thank you.

• MFP Color Laserjet Pro 200 print menu

  When I use my iMac 27 with this printer, I see all the print options in the print menu in preview, etc that are mentioned in the User Guide.  No 'color/quality' options / advanced etc. to change.   I downloaded and installed the latest drivers from HP.  I use OS X 10.9.4.  Am I doing something wrong or missing something.  The product works very well otherwise.

  Hi jerryoster,

  It seems to me from your description that you use the Mac AirPrint driver instead of the HP driver. I suggest the following;

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Color LaserJet Pro 200 M251nw: color HP Laserjet Pro 200 M251nw prints no fonts more than 48 using Office WORD 2013

  If create a new Word document and I type the letters police 72, the letters do not print. If the font size is reduced to 48 it then prints. The new printer is connected to my laptop via USB. I use a HP laptop Pro 7420 s, 32-bit with MS Office H & B 2013. Any ideas as to what I need to check? Thank you.

  Thank you very much, Provost. Please send me the links, which makes it very easy for me. Upgrade to the latest firmware fixed the problem immediately. Accepted solution.

• Color LaserJet Pro 200: Printer does not finish pre-seminar when turned on

  When I turn on the printer, it does not meet the criterion of self-diagnosis. All the icons of perimeter lights up but the screen itself is empty. I have already disconnected the printer with it. I also connected the printer directly to a wall outlet using a different power cord. That is what it is?

  Well, I'll send you a few indications of how to perform a factory reset. You should see a message in your Inbox shortly.

  If the printer will not turn on always having the light of the foregoing, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after doing the reset. If you are able to print or if you arrive to a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Multifunction color HP LaserJet Pro 200: I can't print to my HP printer using wifi, it was working and stopped after the electricity blackout

  I got my printer to print via wifi and it was working fine but as the power went out a few seconds this morning, it will not be printed.  I even reset the wifi but does not always print.

  Well, for this issue:

  1. Make sure that the printer is plugged directly into a wall outlet, not a surge protector.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  4. When the lights come back on the router, turn on the printer.

  Now, on the printer, click on the wireless icon that looks like a radio tower. If you see a line indicating the status: not connected, click on settings and Wireless Setup Wizard to connect the printer to your network.

  Finally:

  1. Click on start and open devices and printers.
  2. Right-click on any icon of your printer listed.
  3. Click on remove the instrument.
  4. Click Add printer, and follow the prompts to add a new queue for your PC.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Multifunction color HP LaserJet Pro 200: Scan problem tray

  I'm having a problem with the scan on the all in one tray. Basically I never scan A4 paper (wireless), but once the data transmitted from the printer to the pc, I find that the PDF version on the screen is too long. I then have to manually crop the size down to A4. It might not seem that a huge problem when say you scan one or two pages, but when you have a whole pile of documents to download, cropping manually each size takes a lot of time. The scanner never used to do this, it's past numbers. I'm using the wrong settings or y at - it something wrong with the scanner itself?

  Well, this should solve your problem:

  Make sure that the printer is plugged directly into a wall outlet, not a surge protector.

  1. Open HP Scan.
  2. Click on the gear icon.
  3. Click on the harvest.
  4. Select A4.

  Please let me know the results after following the above. If you can properly analyze, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.