Color of the cursor of the vs needle

Similar Questions

• How to color and the number of items vary continuously cursor instead of the time?

  I did an animation flash simple as below:

  the first key frame: the second keyframe:

  

  I want to create a slider to make the color of the rectangle varies from red to yellow by the cursor permanently ' movement rather than the hour and make balls fewer 15-8 at the same time.

  could you give me some advice about this?

  Thank you very much.

  Do you understand how to operate the cursor using code to read its value?  You will need to consider the issue to do this.

  What you can do, is get the yello rectangle be a movieclip which is located on the red rectangle and use the slider to control the alpha of the yellow rectangle from 0 to 1 property.  In this way the yolk will fade gradually while sliding.

  You'll then need to do is to find a way to make the number of dots that appear cut from 15 to 8 for the same interval of the cursor.  You must use the fractional value of the scabbard to decide how many points appear or not appear.

  You should not start new assignments for the same subjects you arlready have validations for the.  Do so in the future could lead to them being deleted.

• Change the color of the cursor

  Hello

  I have a simple coloring book that I have developed. I have almost all of the work, but I can't get the cursor on the current color to a range of color.

  The cursor is a movieclip called 'mycursor_mc' it is a clip inside of this so-called "CursorFill. I'm trying to get the clip of "CursorFill" to change the value currentColour of the dynamic property array index.

  This is the section, I was working on but it does not work:

  var mycursor_mc:cursor = new cursor();

  addChild (mycursor_mc);

  var m = new CursorFill();

  mycursor_mc. AddChild (m);

  Here's the Action script:

  Table to hold the colors

  var colorArray:Array = new Array(0xE97DB1,0xF58240,0xF9ED41,0x82C34D,0x00B0F0,0x935CA4,0xFFFFFF);

  A new instance of the class of color transformation.

  var colorTrans:ColorTransform = new ColorTransform;

  var currentColor:int = 0;

  This adds the ovals on the scene with the corresponding color of the table

  and the mouse click events.

  for (var i: int = 0; i < colorArray.length; i ++) {}

  var marker: Sprite = new Sprite();

  Marker.y = 500 + i * 50;

  var c = new MarkerFill();

  c.buttonMode = true;

  marker.addChild (c);

  colorTrans.color = colorArray [i];

  c.transform.colorTransform = colorTrans;

  c.addEventListener (MouseEvent.CLICK, ovalsClick);

  c.arrayIndex = i;

  var o: Outline = new Outline();

  marker.addChild (o);

  addChild (marker);

  }

  This creates a new instance of the slider clip and adds on

  the scene using the addChild method.

  var mycursor_mc:cursor = new cursor();

  addChild (mycursor_mc);

  var m = new CursorFill();

  mycursor_mc. AddChild (m);

  Hides the cursor by default on the stage, so it will not display.

  Mouse.Hide ();

  Adds an event listener on the stage with the enter frame event that

  on several occasions the latter runs the moveCursor function.

  stage.addEventListener (Event.ENTER_FRAME, moveCursor);

  This feature enabled the x, y of the slider positions customized to the x & there posts

  the default cursor.

  function moveCursor(event:Event) {}

  mycursor_mc.x = MouseX;

  mycursor_mc.y = MouseY;

  }

  This sets the value of currentColour of dynamic property array index.

  function ovalsClick(e:MouseEvent):void {}

  currentColor = e.currentTarget.arrayIndex;

  }

  Adds the mouse click event to the holder.

  holder.addEventListener (MouseEvent.CLICK, holderHandler);

  This function changes the color of the clip to the inside

  When he is selected.

  function holderHandler (e:MouseEvent): void {}

  for (var i: int = 0; i < holder.numChildren; i ++) {}

  If (holder.getChildAt (i) .hitTestPoint (mouseX, mouseY, true)) {}

  colorTrans.color = colorArray [currentColor];

  holder.getChildAt (i).transform.colorTransform = colorTrans;

  }

  }

  }

  It's strange. Try to draw a few things so that everything works as it should:

  function ovalsClick(e:MouseEvent):void {
       currentColor = e.currentTarget.arrayIndex;
  
       trace(e.currentTarget, currentColor, colorArray[currentColor]);
  
       var trans:ColorTransform = new ColorTransform();
       trans.color = colorArray[currentColor];
       m.transform.colorTransform = trans;
  }
  

• How can I change the background color of the sidebar bookmarks?

  Grayish brown (I think) background color does not work for me. I'm a little color blind and the cursor to highlight the selected tab is not enough for me to easily see contrast. I found how to change all kinds of colors in FF, but not the background color of the bookmarks bar. I would like to change the background may be blank.

  I have it! My eyes thank you very much for your help!

• How to change the color of the Apple Watch pointer?

  How to change the color of the Apple Watch pointer? In the style of color Apple Watch ca change you the color of the masince, complication, brands, etc. However, the needle of the hours and minutes remains white and red dark second pointer. Is there a way to set the pointers to become Gold?

  Hello

  It is not currently possible to customize the color of the hand or the second on the color dial hand.

  If a customization option is not specified for any feature of any particular face watch, then it cannot be customized.

  More information:

  https://help.Apple.com/watch/#/apd6ce85daf4

• color of the very light slider

  The color of my cursor on the side and bottom of the screen is so light that I didn't. Almost transparent.  How can I change the color, or make it darker? Thank you in advance. -sid

  Hi Zzzlife,

  1. If it works well before?

  2 have you made changes to your computer recently?

  3. are you talking about the slider of the scroll bar?

  If you are referring to the scroll bar, the scroll in Windows 7 bar is blue when you click on what is normal.

  Step 1

  Try to change the theme and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/change-the-theme-to-improve-performance

  Step 2

  If she worked very well recently, try a restore of the system on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I change the background of the "space needle image"? (not the bureau but the 1st screen)

  How can I change the background of the "space needle image"? (not the bureau but the 1st screen)

  Hello helpmezune,

  Move your cursor to the bottom right of your screen, as if you were about to shut down your PC. Charms bar appears. Click the settings (gear) icon. In the settings window, click on the option change PC settings at the bottom of the window. You can change the image of the needle space of the screen option customize in the settings window of change of PC.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• In the book module page numbers are the same color as the text of the title. How can I change the color of the page numbers in black?

  In the book module page numbers are the same color as the text of the title and I would like that the numbering of the pages to be black. How can I do this?

  Click the mouse cursor exactly on a Page number where it appears on a page.

  Set the color of the characters in the Type Panel.

  "Type" parameters are related to each field Photo text, the text of the Page text, text number of pages, which allows you to set the Style of individual text for each of these three "areas".

• Change color to the overview and click

  Hello

  I have stock dynamics created symbols:

  MouseEnter: change color when the mouse is on the button.

  Mouseout/mouseouthandler(): to reset the color when the mouse is in progress to another button.

  And I have problem on the click event, because I can't keep the blck color, which means clicking on the symbol, as I have a mouseout/mouseouthandler() that reset.

  Here is the code:

  $.getJSON ("menubuttons.json") (.the)

  function (data) {}

  $(données, fonction (index, item) {} .each)

  var menubtn = stage.createChildSymbol ("templ-menubuttons", "Stage");

  var menubtnelem = menubtn.getSymbolElement ();

  menubtnelem.Attr ("id", item.title)

  . CSS ({"background-size': 'contain', 'left': 1256," top":"95px","cursor":"pointeur"});})

  menubtn.$("txt").html (Item.title);

  MouseOver

  menubtnelem.on ("mouseenter", function () {}

  If ($(this) .attr ("id") = "Exit") {}

  TweenLite.to (menubtn.$("imageholder"), 0.3, {backgroundColor: 'red', left: '2px'});

  }

  else {}

  TweenLite.to (menubtn.$("imageholder"), 0.1, {backgroundColor: 'black', left: '2px'});

  }

  });

  Mouseout/mouseouthandler()

  menubtnelem.on ("mouseleave", function () {}

  TweenLite.to (menubtn.$("imageholder"), 0.1, {backgroundColor: '#ffcf00', left: '0px'});

  });

  Click

  menubtnelem.on ("mousedown", function () {}

  With 'for' I'm trying to reset the color of all the yellow buttons and then one that is clicked to be black - but does not work - how is Possible to work?

  for (var i = 0; i < data.length; i ++) {}

  TweenLite.to (menubtn.$("imageholder"), 0.1, {backgroundColor: '#ffcf00', left: '0px'});

  }

  TweenLite.to (menubtn.$("imageholder"), 0.1, {backgroundColor: 'black', left: '2px'});

  });

  });

  });

  This may help - it's not created dynamically well symbols, but it can give you an idea how to solve your problem

  Bind / unbind help please

• change the color of the text element

  Hello
  I have 3 elements of text in the form of my text, I want when the cursor in a text element will change the color of the item.
  Note:
  I have already created a Visual attribute.

  979155 wrote:
  Hello
  Thanks for the reply
  I also want to when the cursor leaves an article color text back 'white '.

  Yes... my example do it for you... Check the code.

  Hope this helps

  Hamid

  Mark correct/good to help others to get the right answers. *

• How can I set different background color for the slider?

  Hello
  I want to set a different color for track Slider, slider track is spitted into two sections by slider-button.
  I want to put a left gray, the right of a white.
  Under css only changes the background of the entire track, but how I can change different background color for the slider?
  Any suggestion?
  

  .slider {
      -fx-border-width: 0;
  }
  .slider *.track {
      -fx-background-color:white;
      -fx-background-insets:  0, 1;
      -fx-border-color: #faf0e6;
      -fx-border-width: 1;
      -fx-border-style:solid;
      -fx-progress-color:yellow;
      -fx-border-radius: 20;
  }
  .slider.knobStyle:focused .knob {
      -fx-effect: dropshadow( three-pass-box , red , 5 , 0.5 , 0 , 0 );
  }
  .slider.knobStyle:unfocused .knob {
      -fx-effect: dropshadow( three-pass-box , red , 5 , 0.5 , 0 , 0 );
  }
  .slider .thumb {
       -fx-background-color:rgb(224,225,226);
       -fx-background-repeat:stretch;
       -fx-background-size:stretch;
       -fx-background-position:center top;
       -fx-background-image:url("../images/volume_ball.png");
          -fx-padding: 10;
  }

  I don't know why I can't get the node of the track, track has always set to null and the thumb or the other.

  After that the cursor was displayed on an active scene are you doing research?

  (ex.: after you have added the slider to a scene, the scene for scene, then called stage.show ())

• Color of the rollover on answers quiz slides

  In Captivate 5.5, is there a way to change the color of the bearing when the learner is over their cursor an answer on a quiz slide? In my project, the rollover highlight color is a dark grey, it is difficult to read the answer when the cursor is on the text of the response.

  Unfortunately not.

  Join the queue and connect you to an enhancement request to address this problem. I agree that this is a major defect not being able to configure the color of this reversal.

• Best way to go next to improve the color of the sky?

  Hi guys,.

  I have most of my colors from just about the way I would like them in Camera Raw, except for one thing: my bright blue sky out of kind of dull - particularly in comparison with JPEG files in camera.  Notice the difference, for example, in the colors of the sky in this representative sample.  I use the camera profile Adobe's Standard with a few settings for default cursors, but none of the available cursors allow me to saturate the color of the sky without altering the balance of the darker colors.

  

  I wouldn't mind a much more saturated sky with the more blue color that I get from Photoshop, but the real key here is the level of color saturation in the sky.  Clearly the Canon's interpretation of the data in the area of clear sky quite differently from Adobe converter.  In my opinion, they do a better job than Adobe.

  My question is this: in pursuit of the colors more saturated vives, should I change my own profile?  Or maybe I should craft some measures in adequate Photoshop fix this?  The former would give a result more integrated, direct, but it wouldn't be too bad as I already use an action to convert to ProPhoto RGB images to sRGB.

  Any suggestions you have would be greatly appreciated.

  Thank you.

  -Christmas

  Noel,.

  I did more high profile of dng using (16 bits) out of Canon DPP and not the camera. If I understand correctly, Adobe did the same thing. There are slight differences in rendering between the camera and the DPP, so try to develop your RAW with DPP and ACR and check the differences

  Technically, this profile has the same WB as camera Standard, I borrowed the color of it dies. But even if WB are different, if you set WB to "As Shot", which is white (R = G = B) using camera Standard white with this profile, just the color temperature and the color displayed in the window of the cab would be different. It is because when WB is set shot, then ACR gets all the necessary information of WB for the transformation of color in raw file's exif tags

  However, as various technical details in DPP and ACR (and photo) are different, it is not to expect that you get the exact match of all the colors, but I did everything I can to be as close as possible.

  In addition, as I wrote, to match the camera / DPP exposure, good value is, for some reason,-0,24 (instead of-0,25), because it's the ACR value uses for 40 days (at least in the case of flood attached you). Not a big difference however...

  Edit: actually, the color matrices are taking of dng that has been converted to cr2. There are differences in the 4th decimal place of matrix2 between dng and camera Standard, where the difference in hue 1 and 50K to color temperature, displayed in ACR

• Apply a different color to the gradients

  Probably be very stupid, but I have a question regarding the application of the gradients.

  I did a rectangular box to frame some images in my document and apply a fade to the box so that it looks better with the text on the left side.  However, whenever I have apply the gradient, color automatically goes to black.  When I try to ride this gradient of red instead of black, the whole box is new red (remove the gradient).  I can't work out how to apply a gradient to the color of my choice - as I say, probably be thick!

  Hope you can help.

  Thank you

  Mark

  Mark,

  (1) select the path with the grayscale gradient to be changed;

  (2) in the gradient palette, click on the black square under the cursor (the color of end); in the color palette, you will see a value of 100K;

  (3) or

  (a) click on the up arrow to the right page and select the space to the right color (RGB as the document) and insert the desired value (s of R, G, and B), or

  (b) AltClick/OptionClick a shade of the color of the right end.

• Pages 5.6.2, cannot highlight and change the color of the text?

  I use pages 4.3 and earlier of passage to 5.6.2 - I just tried to highlight a word in a document and change the color - nothing happened.  Tried selecting the color first, and then type a new Word and that doesn't work either.  Am I missing something?  Is there any quick way to the color of the text in 5.6.2?

  To well highlight a word or a selection of words in the v5.6.2, Pages you will need to select the text, click the image below on the gear watch icon and set the fill color of your character. To remove the highlight, select your text, click in the ink of fill color of characters and click transparency icon in the lower right.

  

• change the color of the title effect

  For this example of a readymade title:

  

  I would like to know how I could change the color (red) behind the title of the text.  Let's say, I would like the blue instead, or yellow, or anything else.  I tried a number of ways (just getting used to FCP X).  Y at - it a command for this, or should I make a mask with a different color?  Problem is red is lively, and a mobile mast would be required... sort of complicated as a procedure.  BTW, how these securities were made?  In another program, or can they be changed in it?

  2nd question: How can I extend the follow-up of this text as a sequence of animation?  I tried to change the follow-up by degrees and adding images key, but it does not work.  In other words, when you see the title, shown above, I would like to extend then follow-up.

  Thank you.

  As for the above, I just tried to open the color Board and find I can indeed change body color (see screenshot), but the photo image is also affected by the change of color.  How do I get the color of the title change and keep the color of the photo?