color picker does not work

Similar Questions

• Color picker does not work in Windows media player 11

  color picker does not work. The frame color is red and there is no way to change.
  I tried with uninstall and re install, however the problem still exists.

  It seems that your WMP is in skin Mode. You can switch to full mode CTRL + 1 or Ctrl + M in WMP.

• My elements 8 color picker does not work

  When I choose a color with the color on Photoshop Elements 8 selector and I click OK, no matter what color I pick up grey watch. What's wrong??

  Make sure you have an RGB image (image > mode).

• my color resolution does not work can you tell me how to fix it?

  Hi my color resolution does not work its blurry can you tell me how to fix it? Ty

  Hello Andrea,

  First, what operating system are you using?

  Second, how many time that there a problem?

  Was anything changed on your system before to happen began?

  Finally, you have the latest updated drivers for your video card?

  Eddie B.

• MS Paint "fill with color" tool does not work. :(

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  Hé salés

  try to run the sfc/scannow command. to repair the corrupted system files

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Walter, the time zone traveller

• Background color codes does not work. Help, please

  I am trying to add a background color to a page.
  
  But the background color does not appear.
  
  What I do is add, using for example rose:
  bgcolor: rose;
  the style section.
  
  Here is a simplified version of the code. It just uses the letter "on several occasions to find out where there is a lot more text:
  
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  "< html xmlns =" http://www.w3.org/1999/xhtml "> "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"
  < title > Untitled Document < /title >
  < style type = "text/css" >
  {p.MsoNormal}
  margin: 0 cm;
  margin left: 30px;
  margin-bottom: .0001pt;
  bgcolor: rose;
  font-size: 12.0pt;
  do-family: "Times New Roman";
  }
  < / style >
  < / head >
  
  < body >
  < class p = "MsoNormal" style = "" text-autospace: none; "> < span style =" do-family: Geneva; "" color: black; "> < / span > < / p >"
  < class p = "MsoNormal" style = "line-height: 14.0pt;" text-autospace: none; "> < span style =" do-family: "Arial Black"; " font-size: 14.0pt; "> abdellah abdellah aaaaa abdelkrim </span > < / p >"
  
  < / body >
  < / html >
  
  What I am doing wrong?

  > Hi Ken,.
  >
  > Did you replace
  > bgcolor: rose;
  > with
  > body {background-color: pink};
  >
  > I did that, but it does not work.

  Your code is wrong. The semicolon must come immediately at the end of the
  rule; the curly brackets must be the last thing in the code for each
  selector. So:

  Body {background-color: pink ;}}

  If it still does not... certain colors based on word work well in CSS...
  I don't know if 'rose' is one of them (red, black and white are all certainly
  safe, but I don't have a list in front of me at the moment)

  It would be better to find the HTML code of the desired color and use it
  instead.

  For example body {background-color: #dec4c5 ;}}

  BTW, an excellent (and free) tool for the detection of the colors is Pixie:

  http://www.Nattyware.com/pixie.html

  --
  Tim G.
  http://www.pactumweb.com
  http://www.shortordersite.com

• Color ink does not work. Black is working I have a hp C310a.

  I have a HP C310a photosmart printer.  She needed a black ink cartridge.  I put it and it works fine.  But now the color inks do not work.  Grayscale is not verified.  Color is verified.  I ran a diagnostic page and it says that everything is good.

  Hi hsrmom,

  What color is not printing? (Cyan, Magenta or yellow)

  Try the procedure described in the document at the link below.

  Troubleshooting print quality problems

• New color cartridge does not work

  I have a longer printer hp psc 1210 and never had any problems until recently.  I ran more ink color and black print just for a few months, but now that I finally bought several cartridges color it does not print colors and I get an error message saying that the tri color cartridge is not compatible.  I checked and this brand is compatible with my printer, I tried to take the cartridges out and put them back in and unplug the printer.  I tried to clean the electrical contacts, and always the color will not print.  I even bought another another brand color cartridge and tried and still no luck! What can I do else?

  I understand that you get an error of ink cartridge rejection. I would like to look at this document here the addresses of ink cartridge for your printer errors. It will show you how to remove and inspect the cartridges with the printer disconnected. It will also show you how to clean the cartridges and the printer falls. Since you mentioned that you cleaned the contacts on the cartridges. compare the methods you employee against the instructions and make sure to follow with the falls of the printer in order to ensure that all the build-up has been removed from cleaner. I hope this helps.

• Color picker does not in CC and 12 elements

  My color chart maintains gray picking instead of any other color that I chose. It's the same CC and 12 elements. I'm on an iMac Yosemite running.

  the color picker works well when no document is open, but returned to gray, once I opened a.

  You open a document in grayscale, then.

• Color picker does not not in first CC running 10.9 Mavericks

  IM can use for the text color picker and even for keys ultra color picker. When I want to choose a color that I want to use the cursor for a text cursor change. Please help as soon as possible. Thank you!!

  GoTo > System Prefs > Mission Control.

  Uncheck "screens have a separate space.

  Disconnection or re - start.

  My monitors were then back to pre use of Maverick.  This means a program can be seen on two monitors that is on one half and the other half on the other.

  Dropper then worked!

• DW CS3 Mac picker does not work

  My pipette will pick up color outside the swatch group.
  
  If I click on a CSS (say 'footer') class in the CSS panel, then click on the pencil icon to edit the properties, then click the color swatch for "Background color", I get a color swatch Panel and a pipette. The eyedropper allows me to choose the shade colors, but if I fly over the part of the page I design, color changes correctly _temporarily_, moving, everything that I'm hovering above, BUT nothing happens when I click, and I can't do will change the color of the element to the color that the pipette was hovering above.
  
  I don't know if it's relevant, but the color I tried to address was that of a false "column, where a vertical sidebar color is actually a vertically tiled 'background image' set by CSS.
  
  It drives me crazy. I have to memorize the hexagon for color and then type the information in each time.
  
  Can someone help me?
  
  Thank you!

  Oh for crying out loud the top and hard - I feel like such a fool! :)

  It worked like a charm.

  I used Dreamweaver since MX, which is a number of years, and I regularly used the Eyedropper to grab colors from anywhere.

  Maybe what confused me, but not only, I switched from a PC to a Mac, I had a desktop to a MacBook Pro, so I use a trackpad instead of a mouse. Maybe the awkwardness (I'm still not used to it) drag on a trackpad, while holding the button (one and only, on a Mac) this key not 'feel' like what I had done before.

  Thank you very much!

• Color management does not work in AE

  I have color manage everything that I did in Photoshop and Lightroom without a hitch.

  After Effects CS5 not color correctly handles.  It simply doesn't get it.  The only setting I could find that he'll simply ask if you want it to be more accurate.

  Maybe there are other settings somewhere, but I have not found.

  Is there anyone out there who really understands the management of color that has the same problem?

  I want to be able to see on my screen wide range during the preview of EI, what I see in Photoshop.  I work with still images and thought that AE would simply allow me to display my images based on my color profile.

  AE will recognize integrated patterns of colors, but you still need to tell him how to keep or convert them by setting the color space of the project in the project options and assigning insight (proof) profile to your model (your profile monitor in this case) and according to what other stuff figures, you need to face the options of linearization and replacements of Gamma or manually apply a color profile Converter effect. Anyway, depending on what you are after and where you plan to use your resulting video, none of this may make sense, and you can be to tackle the problem from the wrong end. If your files will be on a DVD, BluRay, or as a Flash video on the web, deep adjustments using your own profiels won't do any good, color spaces and profiles targets for specific video formats are set. So in fact, you may have to spend the time to adjust your images to work without color profiles or the sRGB standard profile at least...

  Mylenium

• the color scheme does not work as follows.

  Question:

  Suddenly occurred the following phenomena, using PSE - 9 on Windows 7.

  After you set a white canvas at at the beginning, all drawing colors cannot be choiced but made with gray colors in different light depending on the lightness of the color.

  However, without the Web, they can be chosen as usual. So that I can't use my PES and he might there have found several flaws on the cross on current usage.

  I tried to have it uninstalled, installed recently by WAA and re-powered disc again, but nothing has not improved.

  I'm stuck in distress.

  I am very appreciated if you don't show how to improve the situation. Thank you.

  Change the grayscale to RGB color mode by using the top menu:

  Image > Mode

• CTRL + Alt to change Brush hardness/zoom does not work.

  Latest version of Photoshop CC... CTRL + Alt to change the size of the Brush/hardness does not work. CTRL/Alt/Shift for the color picker does not work either.  I watch the tutorials that show that it is supposed to work. I use a Wacom tablet if it matters. Is this a feature of scrolling the mouse wheel? Do not specify the tutorials I've seen it.

  Support keys adjust the size. support shift adjust the hardness. Or alt/opt and do a right-click drag and down the hardness changes and left to size changes right.

• Selector color Photoshop suddenly does not work

  Hello

  I never had this problem before. I worked on a project in Photoshop, and for some reason, he now works only in shades of gray. When I used the color picker to change the color, it does not work.  I know, don't forget to do anything different to make it work only in shades of gray, but I can't seem to understand how to switch color mode and I'm in the middle of an important project. Anyone know how to fix this?

  Penny Jones

  [email protected]

  Look at the Document tab at the top. RGB/8 should be the norm.  If you somehow typed 'q' on your keyboard, then it would read

  'Mask quick/8' and the color picker would not choose a color. Press q for back RGB.

  Always check the Document tab, it will clue you into what you have selected. He says "Layer 0, layer mask/8" If you have selected a layer mask.

  Finally you may have selected a color channel and it would read layer 0, blue/8.  Cmd/Ctrl 2 can go back you to RGB.