Similar Questions

• I lucky d buy photoschop and I wrong departure by clicking on the bad deal and I find myself on the page or you must enter the license number that I don't have car I did not type my number which is on the comment card is it ISP

  Hello I d buy a card of photoshop and I wrong departure I did not click on the bargain when I arrive on the choice so j comes directly or wonder the license number while I n have that card j code I hope make me understand because a card one is 150 euros UN bubget if someone can help m because I novice really am with all these new tetecharment system

  Thank you from me repoundre

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

• How to get the serial number for an old software Acrobat?

  Hi all

  I lost the serial number as well as the case plastic of Acrobat 8 Standard edition that I bought in 2008.

  I found the CD without the box. Is there anyway to recover the serial number of the product?

  Please advice?

  Best

  UH

  If you have registered your product when you installed it first, then you might be able to find the serial number recorded in your Adobe account online.  In addition, you must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• Come fare a change the partita iva associata all'account?

  Ho UN abbonamento Creative Cloud che viene sales now alla mia partita iva (ditta individuale). The stoper chiudere e iva Partita I like mid gap sales come final account... Qualcuno his reject come fare?

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• The Partita Iva e não Devo cambiare absolutely her Carta di Credito by rinnovare abbonamento all year

  Ho urgent need cambiare anagrafica business, partita iva e quindi di carta di credito by rinnovo

  Hi flavios28458136,

  Please see this KB doc for help: your Adobe ID account management

  If you still need assistance, you can contact customer service. If please sign in with your Adobe ID and select the product from the list below on this page

  Then choose a chat option or by phone under "still need help? Contact us. "

  Kind regards

  Meenakshi

• Devo change the partita iva che device in manufacture clear the abbonamento o, my it sito mi rimanda sempre al punto di departure, como posso rates? Grazie

  Devo change the partita iva che device in manufacture clear the abbonamento o, my it sito mi rimanda sempre al punto di departure, como posso rates? Grazie

  Hello

  I ask you to contact you the Support of Adobe Chat and they will be able to help you with the issue.

  Please visit the following link to contact the Support from Adobe.

  Contact the customer service

  Hope this will solve your problem.

  Kind regards

  Hervé Khare

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• Question on Partition 'DATA' on the Satellite X 200 - 20 s

  Hi, firstly it is great that toshiba has this forum directly from the page of the manufacturer. I wonder what is on the partition of DATA from my laptop. The 200 X 20 s comes with two 160 GB HARD drive. One is divided into two 73 GB. I would like to install linus on the DATA which is empty. What is the purpose of it?

  I guess that the intent of the parititon of 'DATA' is to store data on it. Sound very logical in my opinion. Since you have a HDD recovery you should check first if this DATA partition is not the recovery of HARD drive partition. I think that the best thing to do before installing linux, create a recovery disk with the "Recovery Disc creator and then install your linux system.

  On linux, I have an interesting link for you:

  http://Linux.Toshiba-DME.co.jp/Linux/index.htm

  Hope you find your machine here.

  Welcome them

• Qosmio F60 - no tuner partitions to meet the current demand

  Have a Qosmio F60 with built-in TV tuner. Running Windows 7 64 bit. I have install the TV tuner a few weeks back and it have not used much since. Windows Media Center is now "no tuner partitions to meet the demand for courses". Since the establishment of the tuner, I installed Pinnacle Studio 14 Ultimate Collection and, of course, the list of updates of Windows.

  I do not see the tuner in the material or the other list, but then I don't know if I'm supposed to.

  > TV Tuner does not appear in the list of devices. Yesterday, I was able to visit a retailer and check that the Tuner on an identical machine is listed in the list of legacy

  You tired to reinstall the Tv tuner driver? Check this box:

  [Tv tuner | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 170 & selProduct = 978 & STAS hortMod = 968 & language = 13 & selOS = 30 & selType = 218 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 218 & page = 1 & ID = 72412 & OSI D = 30 & driverLanguage = 42]

  It would be better if posted runs of your laptop model No.

• Satellite M115-S3094: how to make a partition without reformatting the HARD drive?

  Hello

  recently bought a laptop Toshiba M115 comes with 80 GB ' SATA drive and XP MEDIA CENTER 2002

  (1) how do I partition without reformatting the drive.

  (2) even if the laptop came with a pre-installed xp. I was wondering what happens if I want to reinstall xp media center, if and when required. Y at - it a disc that I can order (I have the license)... What options of backup kindo f are at - it?

  first time with toshiba... so am new at the mercy of the workings...

  DMM

  Hello

  1.), I use the Partitions Magic 8 to create partitions on the HARD drive.
  This application is very nice and I love it all simply ;)
  You can change the size of the partitions, status and you can fully manage the partitions on the HARD disk. And the best thing is you do not need to format anything B-)

  2.) well, the computer Toshiba laptop are delivered also with the recovery CD. I think that all manufacturers of laptops offers this CD of restoration with own products.
  In any case, on this CD, you'll find Tosh preinstalled operating system drivers.
  If you want to install other OS (XP MCE) you can do it, but you should check if there are drivers that are needed for this OS. But I have XP drivers should also work with thin MCE.

• Is anyway to create fifth partition and keep the basic hard disk?

  Hi, my laptop is g7 1207se Pavilion and the and HP has made 4 partitions (C for windows) and the other 3 for system files and recovery, I want to create a new partition for my files (so I can recover my system without losing them) or install other operating systems, but apparently if I want to create fifth partition I have to convert my hard drive in Dynamics by the practice that I won't be able to boot from any partition but the C, which means no recovery and no other operating system.

  Is anyway to create fifth partition and keep the basic hard disk?

  Hello

  See the excellent guide of Daniel_Potyrala on the link in this regard.

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-pre-loaded-Windows-7/TD-p/742019

  Kind regards

  DP - K

• How to remove a logical Partition without disturbing the other

  Hello, I recently ran into some trouble.

  As you can see from the picture, there are little free space next to the D: (10.55 GB) drive. I want to merge the free space with the 5 GB unallocated space and want to create a primary partition to install another version of windows. The problem is that when I right click the free space, the partition option delete is gray. I discovered that to delete the D: drive to get space but I can't do that. Even my backup drive is full.

  So, how do to remove free space without disturbing D: drive

  

  You can merge only the free and not allocated using a third-party partitioning tool and not the built in tool of victory.

  It's free http://www.easeus.com/partition-manager/epm-free.html

  If you add another partition to base all existing partitions will be converted to dynamic, the recovery partition to the then will no longer work

• Will there be repercussions to Program Files on one partition other than the operating system of the installation?

  Will there be repercussions to Program Files on one partition other than the operating system of the installation?  Most if not all the software packages allow to customize the installation.  I had an experience with OFFICE 2013 and this allowed me to install on a separate partition.  After installation, I checked the menu START was 2013 OFFICE & I was able to launch PwrPt without complications.

  My motivation for doing this is that I have several versions of LabView which occupies the huge disk space.  So if I can separate the backup image of my OS program files is greatly reduced in size.  This allows me to record several images of my OS by dates without needlessly chewing my external hard drive.

  Anyone know this & if yes are there complications or questions?

  Appreciate any feedback

  I think I've found a more informative explanation via:

  http://www.SevenForums.com/general-discussion/221347-install-personal-programs-partition-separate-OS-partition.html

• Windows cannot be installed to this disk. the selected disk is a MBR partition table. The EFI system, Windows cannot be installed on GPT disks

  Server 8 installation error "Windows cannot be installed to this disk. the selected disk is a MBR partition table. The EFI system, Windows cannot be installed to GPT disks.

  

  How do I resolve this problem and install windows 8 as usual? I have several partitions with data... I don't want to delete all partitions and create partitions from scratch and install the os...

  How to get there?

  Windows cannot be installed to this disk. the selected disk is a MBR partition table. The EFI system, Windows cannot be installed to GPT disks.

  This could happen not only windows 8, but also windows 7, windows Server 2008, or 8 server 2008 R2... Troubleshooting steps will be similar for all windows to get this problem...

  I had this problem when installing server 2008 r2 on a dell... T110 server without remove the other partitions or lose all the data on the other drivers, you can solve this problem...

  simply, I have followed these steps using gparted and solved my problem... These measures will be useful for anyone with similar problem... . All the steps that I've documented here... All the steps I've documented here...

  https://www.pcandtablet.com/Windows-8-errors-and-crashes/846/Windows-cannot-be-installed-to-this-disk-the-selected-disk-has-an-MBR-partition-tabl.html

• How reduce the Win7 boot partition, then move the other partitions left in newly free space?

  Summary: How can I shrink/move partitions on my HDD 650 GB physical so that they reside in the first 500 GB of that drive?

  I have a newly purchased HP dm4-2070us laptop with Win 7 Home Premium (HP OEM) installed on the hard disk of 640 GB.  This hard drive is slow, so I would like to replace it with a 500 GB Seagate Momentus XT.

  In order to be able to clone all the partitions of the 640 GB drive for the smallest 500 GB replacement drive, I need to shrink the partition C: (main window), then move the partitions remaining 'left' ending up with all partitions in the first 500 GB of the disk so I can then copy this image to the new drive of 500 GB.

  I already have the software to clone the partitions of the 640 GB drive for the 500 GB drive.

  My concerns:

  (1) the administration tool Win7 disc printing should it allows me to shrink the C: boot partition, but I don't know if that can damage anything.

  (2) move the SYSTEM partition, or the partition RECOVERY left the impression that he could render the system unbootable.

  Here is a screencap of my current scores in the Win7 disk management tool:

  See this page

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-pre-loaded-Windows-7/m-p/742019