Command in Terminal

Similar Questions

• No command ' configure terminal ' privilege mode

  Hi guys,.

  I'm seting up a 1250G AP Cisco via port console for the first time, something very strange, I can not find command "configure terminal" under privileged mode. Does anyone know why? Thanks in advance.

  AP0026.994C.e39c #sh privilege
  Current privilege level is 15
  AP0026.994C.e39c #?
  Exec commands:
  CD change current directory
  Disable the Reset functions
  Manage the clock system clock
  Crypto encryption related orders.
  debug debugging features (see also "undebug")
  Delete Deletes a file
  List of files on a file system dir
  disable the Turn off privileged commands
  dot1x IEEE 802. 1 X commands Exec
  turn on the turn on privileged commands
  exit from the EXEC
  fsck Fsck a file system
  help Description of the interactive help system
  led functions LED
  locking of the terminal
  Connection connect you as a particular user
  Logout Exit from the EXEC
  OfficeExtend AP lwapconfig configurations
  LWAPP lwapp exec commands
  mkdir create new directory
  monitor various system events monitoring
  more display the contents of a file
  Name the connection-name an existing network connection
  No function to disable debugging
  Send echo ping messages
  Working Directory current pwd display
  RADIUS radius exec orders
  Release to release a resource
  Stop reload and perform a restart cold
  Rename rename a file
  renew renew a resource
  rmdir remove the existing directory
  rsh to execute a remote command
  Register early to save the battery raise_interrupt_level
  Send a message to other TTY lines
  setting system Set Set (no config)
  Show Show running system information
  SSH open a secure shell client connection
  SYSTAT display information about the terminal lines
  terminal Set terminal line parameters
  Test Test subsystems, memory and interfaces
  Traceroute-Trace route to destination
  undebug disable debugging functions (see also 'debug')
  software upgrade upgrade
  Check check a file
  where the list of active connections

  AP0026.994C.e39c ter #config
  ^
  Invalid entry % detected at ' ^' marker.

  AP0026.994C.e39c #.

  AP0026.994C.e39c #sh worm
  Software Cisco IOS, C1250 Software (C1250-K9W8-M), Version 12.4 JA (21 a), RELEASE SOFTWARE (fc1)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2009 by Cisco Systems, Inc.
  Updated Tuesday 8 June 09 16:49 by prod_rel_team

  Hello

  The reason why you do not have the config t prompt is because you have a LWAPP access point. LWAPP ap do not have a config t, as the access point's configuration of the WLC.

  If you find the useful rate please post... Thank you!

• I have a problem with the command window terminal

  I'm doing a bootable disc. I glue in the sudo command and can't go any further. When I am invited to my password it's like my keyboard is disconnected. Comparing what I feel for YouTube videos, I noticed that I see things a little differently and maybe that's the key and I'm open to suggestions. That's what I see after the command and click on back:

  Last login: Thursday, August 11 at 17:20:16 on ttys000

  : ~ * sudo/Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/ElCapInstaller--applicationpath Applications / Install\ OS\ El\ Capitan .app X\ - nointeraction

  CAUTION: Improper use of the sudo command could lead to data loss

  or the deletion of important system files. Recheck your

  If you type when you use sudo. Type "man sudo" for more information.

  To continue, enter your password, or type Ctrl-C to abort.

  Password:

  After the password: is a small logo, a rectangle with a key in it. At this point, I am unable to type anything, the back button still works, but I'm unable to type anything later. What I'm doing wrong or not understanding? I'm new on this.

  Password entry is not included. It seems that nothing is entered, but everything you type is received. Type your password, and then press return. You will then receive a short prompt asking you to enter 'y' or 'n'. The first will take action. The abandonment of the latter.

• How to cd in the terminal for MacOS/device training and records

  I tried to change the folder in the Mac OS disk. But when I give the ls command in terminal, I don't see this named device listed in the directory to go. Can you please suggest how to move to this directory in the drive unit / MacOS?

  

  

  Put a / in front of the space in the path.

  (141677)

• Where can I find more details about command line interface?

  Specifically, I wonder how we remove something that has been installed, like homebrew, xcode, etc..  But, just generalities would be useful.

  https://www.Apple.com/server/docs/Command_Line.PDF

  https://developer.Apple.com/library/Mac/documentation/opensource/conceptual/Shel lScripting/CommandLInePrimer/line of command...

  https://www.Google.com/search?q=Apple+OSX+command+line+termanal & ie = UTF-8 & oe = UTF-8 #q = apple os x-command line + terminal

• Trying to block "configures terminal" on GBA 5.3

  Hi friends!

  I'm trying to block users to use the command "Configure Terminal Server" using GBA 5.3, but so far it is working properly.

  The same set of orders, if I put any other command (such as reload, telnet) and choose to refuse, it works very well, but to prevent the user to enter in Setup mode, I'm not able to block again.

  I really appreciate if someone here can help me or if she has already passed for this situation.

  Thank you!

  MOV

  On GBA, please use "Deny set up" and do not fill the field argument. Remove the other sets of similar orders.

  On the side of the IOS, make sure you have

  aaa authorization config-commands

• How is it safe to type the password for the Mac in while net surfing?

  Greetings!

  This question, I hope a little more am react.

  Mac (not the apple account password) password is required to type to make big system changes. I started thinking, how easy is to villains to steal? I was surfing net to find answers to a problem and then typed in command in Terminal.app. And then started worrying - could he was reading / stolen by some site that I had to open this time?

  Noticed that terminal needed no password minute later when I added the new command. I hope he didn't mean that his record here and outside the source able to read?

  Sorry I don't know much about tech. I hear passwords remain safe and it worried me. Ease is even steal password of Mac by external sources (hoping that I am not infected with what either).

  If your Mac is protected by a password for admin (connection) anything can happen, so I hope you can be one, one good and that use you it.

• Where are the time Machine connects to Sierra?

  Running Sierra on a late 2009 iMac. Time Machine works well and updated regularly. However the Time Machine buddy Widget shows all the information. Study using the Console indicates that the TM log entries are to be absent in Syslog. Nothing shows using the "backupd" as a filter on the system log. Under Diagnostics and usage data, I see information for the type of backup and "NOERROR" for completion.

  Does anyone know what has changed in the Sierra? Or is it my unit?

  Boyfriend of Time Machine does not work with Sierra

  Console is 'redesigned', extraction of newspapers can be difficult...

  But!

  You can copy the lines of command in Terminal to see the logs of Time Machine ("TM on the fly" and "History of TM")

  Since this discussion started I see how activity time Machine Console with macOS Sierra;

  By copying this command (from John Galt) line in the Terminal I can view TM-history-logs for a few days back;

  Newspaper show - predicate "subsystem =="com.apple.TimeMachine"'-info | grep ' upd: (' | cut-c - 1-19 140-999)

  This command line also gives information of a TM running 'on the fly', but after the TM copy I have to put in the line of command again TM start-up for a new copy (I can live with that...)

  By copying this command (from chockosmund) line in the Terminal I see what TM is ding on the fly, but did not get the newspaper story.

  the log stream - style syslog - predicate 'contains a [cd] 'Time Machine' senderImagePath' - info

  This command line is that Terminal shows constantly new TM-logs.

  Thank you John Galt and chuckosmund!

  I have a separate Terminal office-space computer were I can watch how TM is progressing.

  Hope that answers your question.

  Jur Kuipers, Netherlands

• Documents directory empty following Sierra install

  After installation of Sierra, My Documents directory is empty.  In the window terminal ls - l shows .localized ~/Documents

  All other files are missing.

  Have you activated the system preferences > iCloud > iCloud Drive option to store the Desktop and Documents folder in iCloud? Then you are now having a new documents folder in iCloud sidebar of the Finder section.  The path to this file is different. You can see if you drag a document from this folder behind a ls command in Terminal.

• Solid State Drive "wakes up" slowly

  I have installed a 1 TB SSD SATA of Other World Computing in my iMac in early 2009.  Works great with one exception.  When I put on standby, it takes 30 to 40 seconds to wake.  I understand that I should not put an SSD to sleep because it has no moving parts.  And when I put my setting of sleep to "never" the problem does not occur.  That still doesn't explain why it takes so long to 'wake up' when I put the SSD to sleep.  Is it possible that the disk has a defect?  I would stay there or is it a 'not to worry '?  No indication as to why this happens?

  I wonder if it is to create a drag?

  Paste this command in Terminal...

  pmset g | grep standbydelay

• Calendar view bad Cougar on iMac

  Recently (finally!) updated in early 2009 iMac to Mountain Lion.  A few things have caused problems, but it is coming along.

  However, the calendar date, display on the dock (bottom of screen) keeps failing to 17 July and I can't seem to view the current date (currently on 2 September.)  When I double-click on the "17 July", OR right click then open - the calendar appears correct.  (Shows the month of September, as well as Friday the 2nd highlighted.)

  Sometimes it will show correctly in the dock, and sometimes it won't.  And even if it does, it doesn't "stick."

  I have the latest version of Mt Lion (10.8.5) and apparently can't go higher than that since Apple does not seem to have the first version of Mavericks more.

  Cathy

  If your computer can run Mountain Lion, he can run El Capitan, if you want to upgrade.

  The alias station may be impaired. Control - click/Options/remove the Dock or hold down the control key by clicking and now the alias of Dock and drag it off the Dock. Quit/relaunch of calendar. Then control - click/Options/keep in Dock.

  If this does not work, try to restart the Dock using the following command in Terminal:

  Killall Dock

  Log outgoing/incoming and test. If this does not work, you need to look in your user Library/Application Support/docking station for the .db. Use the Finder "Go to folder" command. Enter ~/Library/Applications Support/Dock.  Move the .db on your desktop.

  Then try a reset of the docking station.

  Applications/Utilities/Terminal enter the command

  Killall Dock

  Log out/in test. If it works fine, delete the .db from the desktop.

  If the dock is the same, back up the .db you, crushing the latest.

• Messages indicator shows two new messages, but there is none

  On my MBP, on my Messages icon in the dock, there is an indicator '2', as if I have two new unread messages, but I can't seem to find.

  Is there a problem?

  How to eliminate this indicator?

  Try to restart the Dock using the following command in Terminal:

  Killall Dock

  Log outgoing/incoming and test. If this does not work, you need to look in your user Library/Application Support/docking station for the .db. Use the Finder "Go to folder" command. Enter ~/Library/Applications Support/Dock.  Move the .db on your desktop.

  Then try a reset of the docking station.

  Applications/Utilities/Terminal enter the command

  Killall Dock

  Log out/in test. If it works fine, delete the .db from the desktop.

  If the dock is the same, back up the .db you, crushing the latest.

  If you prefer to make your library user visible permanently, go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Reprints of Leonie.

• Is there a difference between 'firefox - p-no-remote' and 'firefox - ProfileManager "?

  When you switch to another profile, I always use 'firefox - p-no-remote' command in terminal of ubuntu LTS 14.04.
  Then I read a DND article named "Multiple Firefox profiles" (https://developer.mozilla.org/en-US/docs/Mozilla/Multiple_Firefox_Profiles) and here he gives instructions to open the profile with "firefox - ProfileManager" Manager command.

  Now my question is, are the two commands to have accessible different priorities in the Manager profile?

  The - No.-remote with the P - Profilemanager switch switch is in order to start a second instance of Firefox. You cannot start another instance of Firefox with the same profile, or simply by starting Firefox with Profilemanager.

  The latest version, you can start a second instance with just Profilemanager was Firefox 1.0 (1.0.8) and earlier versions. The - No.-distance has been used since version 2.0 of Firefox.

  The-p and - ProfileManager do same thing in the first place of Firefox starting with the ProfileManager.

• How to re - combine a HD and SSD in a player of "Fusion".

  Hi all

  Well, this process has floored me know how much time lost, he created and how the problem occurred in the first place.

  I am wanting to do a clean install of El Capitan on iMac late 2014 retina with El Capitan with a 1 TB drive merger 10.11.6.

  Boot from an external hard drive with OS X utility disk 10.11.4, wouldn't let me simple deletion of the reader. He came up with the error message "removing logical volume of the logical volume group cannot delete the storage base logical volume...". »

  So I started to investigate this problem and found:

  estorage-logical-volume-from-the-Terminal http://Apple.StackExchange.com/questions/136590/How-can-i-Delete-a-partition-Cor

  Who publishes various other forum known as the best solution to the problem. Knowing that I hate to use the terminal, I dove in full anyway. I was reformatting disks on Mac for 20 years without needing terminals?

  I got so far as to remove the existing with logical group:

  sudo diskutil cs deleteLVG

  and now the HD and SSD drives appear on the desktop as a empty volumes (which is fine, I don't need to save anything).

  But now, try to use the:

  sudo diskutil mergePartitions HFS+ "Apple_HFS Macintosh HD" (and different combinations of drive locations)

  results only in "the data partitions are not of the same disc.

  This is what I see with the "diskutil list; ECHO; Cs diskutil list "command in terminal.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB 121.0 Untitled disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS Untitled 999,3 GB disk1s2

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 DIS3

  1: EFI EFI 209.7 MB disk3s1

  2: Apple_HFS Mac Master Image 2016 499,2 GB disk3s2

  3: disk3s3 Apple_Boot Recovery 650.0 MB HD

  I have no idea how recombine the separate HD and SSD drives in one drive of Fusion, with which I can then do a clean installation of El Capitan. Can someone please!

  Also, how can quickly and safely erase a disc from Fusion in the future? I need to deploy a new image of master with all our software top one another 10 times, and I want to completely erase the readers for clean installs (with Migration Assistant for about 8 years, moving from a system has resulted in a lot of weird and wacky behaviour on our Macs) and it is time for a clean install for each of them.

  Again, I'd be very happy any help on this.

  -Alex

  Please read this message before doing anything. If you don't feel confident that you can follow the instructions, ask someone more experienced to help you.

  This procedure applies only to an iMac or a Mac mini with a drive installed in the smelter.

  You must read these instructions while no web browser is running, so either print them or load them onto another device before you start.

  1. all the data on the internal disks will be deleted, including Boot Camp data, which are not saved by Time Machine. You need at least two complete and independent backups. A backup is not enough to be sure. There are ways to back up a computer that is not fully functional. Ask if you need advice.

  2. you will need to start one recovery system other than the one on the internal hard drive (if he has one.) There are several ways to do so.

  a. If you have a backup time of the Machine (not a network backup), or a compatible Mac OS X installation on an external drive, then you should be able to start it by holding down press option key to start ringing. Select the external hard drive in the row of icons that is displayed. I mean by "compatible", an installation running on the machine. A version of Mac OS X that is older than the machine is not compatible.

  b. If you used Recovery Disk Wizard (or can use it now) to prepare a system recovery on a USB flash drive, you can start that by pressing the C button on the ring. No icons will appear. Startup will be much slower than usual.

  c. start the Internet recovery mode by pressing the key combination command-option-R to start ringing. Release the keys when you see a spinning globe. Select a language, if you are prompted.

  Note: You need an Ethernet or Wi - Fi connection to Internet to use the features of recovery network. It will not work with modems USB or PPPoE, proxy servers or networks that require a certificate for authentication.

  3. disconnect all other external storage devices.

  What happens then depends on what version of recovery that you are running.

  ☞ If the machine came with OS X 10.10 ("Yosemite"), 10.9 ("Swat") or 10.8 ("Mountain Lion"), and you're in the recovery of the Internet, please take step 4a and skip step 4 b.

  ☞ otherwise, go to step 4 and go to step 4B.

  If you are unsure which version of Mac OS X, the machine came with, search for it on this page.

  After taking these steps apply, you must have a reader of empty Fusion named 'Macintosh HD' on which you can perform a 7 step or step 7B.

  4. repair of the Fusion drive (see "Troubleshooting" on the linked page.) Quit disk utility and go to step 7A or 7B step. Skip steps 4, 5 and 6.

  4. in the OS X screen utility, select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  5. triple - click anywhere in the line below to select this option:

  N=Macintosh\ HD; for d in /dev/disk?; do o=`diskutil info $d`; for D in SSD HDD; do eval [[ ! \"\$$D\" ]] && grep -lqw "APPLE $D" <<< "$o" && eval $D=$d; done; [[ "$SSD" && "$HDD" ]] && break; done; diskutil cs create "$N" $SSD $HDD && diskutil cs createLV "$N" jhfs+ "$N" 100%

  It is a very long line, and you won't see it on the web page. Be sure to select the entire line, not just the part that you can see.

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  6. in the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination. Wait for a new line ending with a number sign (#) to appear. If nothing happens, press the return key.

  Quit the Terminal must be returned to the main screen.

  7. If you have a Time Machine backup, connect the device to backup and restore your data. If you have saved to a network like a time Capsule device, it must be connected automatically.

  7B. If you do not have a Time Machine backup, or if you can not restore from Time Machine backup that you do not have, install OS x Restore data later in The Migration Wizard.

  In the Internet recovery mode, you install the original version of Mac OS X comes with the machine. If you have upgraded the operating system on the App Store, you will need to do it again.

• How to remove a unfinished file, saved to Time Capsule?

  I have a unfinished about 37 GB folder I can't removed from the TC as:

  The operation cannot be performed because you have not granted access to some of the elements.

  Can someone help me with this problem.

  Thank you.

  You use the same computer with the same operating system and the user of the connection?

  El Capo who has major permissions issues even if you use the same user and the computer you're using?

  It should be possible to delete the file involved using commands in terminal... but it can be much easier to simply use a windows computer, if you have one available... do you?

  The end, enough people seem to fail even using the commands from the terminal. But give it a try... I will need to know your OS... you have the Mavericks in your profile... I think it's outdated, so please confirm.

  Finally, there is the big kahuna... erase the disc from TC... make a backup (airport beforehand utility Archives)... advantage of this being, absolutely nothing can stop him.