Command not available via SSH?

Similar Questions

• Why Photoshop 2014.2.3 download is not available via the Office to CC?

  Just curious as to why this update is not available through the CC Office Update, or even made known unless you dig well this abyss without a website background.

  Here it is for everyone:

  Adobe - Photoshop: for Macintosh: update for Adobe Photoshop CC 2014

  Hi grauenwolfe

  Only the version of Basic for Photoshop CC/2014/2015 is available through creative cloud > previous version tab

  You then later upgrade to a later version.

  Concerning

  Assani

• Sharing of active command not available for users

  I searched all day for some reason why my non-admin in Contribute 3 users can't insert images via the Insert-> option of Division of property. The command is dimmed. Their role permissions have "authorize unlimited edition", so I can't understand why they would be excluded from this shared good feature. I REALLY want to give these users full administrator privileges. They become tired to rerun new connection key everytime I try to chance a new setting. Any help would be greatly appreciated.

  It seems that by disabling the ability of the user to insert images (with the exception of shared property) is the way to go. As long as an administrator I was spoiled as I can insert images any way I chose (insert--> images, cut-and - paste and shared property). As a normal user, it's one or the other, either shared assets or Insert--> Images, not both.

  So in order to give users the ability to access shared property, you must go and set "Allow unrestricted editing" then check the option 'prevent users to insert images. After that they activate the connection key it then only allows them to insert images in active sharing feature.

• Network mapping fails "command not available."

  Last week, I traced a laptop (Windows 7 pro, 64-bit) on a drive on our MS Server 2008. No problem. This week lost the map due to a power outage over the weekend. Ran Net use * /d and was a success. remapped to our Server 2003 successfully, but still would not be mapped on Server 2008.  Tried the drive on the server mapping and received the error "is not accessible by car. Tried different drive letters, all come with the same error. I can connect to this server with remote desktop with the credentials of users. When I try to run the "Run 192.168.1.140" server name I get the error that the user does not have the right to open a session. It is the only machine with this problem. Any suggestions would be helpful. Thank you.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Technet Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• speech recognition - "this command is not available now"...

  I have windows 7 with office 2010 and when I try to say commands, such as select Word or correct the word or ordering another new paragraph I receive a message of this command is not available now... when it will be available? also, when dictating a sentence, if I stop it capitalizes the next word in mid-sentence... How can I fix that? and don't forget that I can't use the exact word or select Word... it took me twice as long to make this letter with speech recognition, of the type just... I read on these forums, I googled to death and please please please do not direct me to another forum... I set up my micro I did the tutorial and additional training, I looked over the options and others and I can not understand how to fix... the exact same question was asked and the person who answered just said set up the microphone, the tutorial and the additional training and as many links to forums... I clicked and traveled all the links and the answer may seem not available as to why my speech recognition accepts not my orders... Please answer and if you don't know, don't send me on a forum's wild-goose chase...

  The solution to your problem is to click the speech recognition microphone, first before you open Word.  Once the speech recognition is started, right-click it, click options, select Notepad of dictation and then open Word.  If you do it in this order, everything should work correctly in Word.  Notepad will not come to the top.  The command everything will work directly in Word itself.  If you open Word first before the speech recognition and do not have Notepad - "command not available" will come.  I hope this helps.

• Smartphone App World for blackBerry error - not available in the App World updated

  BlackBerry has sent me a message that an update was available for one of my apps game 'shoppers paradise '.   When I click on the link to download the upgrade, it gives me an error message that the upgrade is not available via App World.

  Is anyone else having this problem?  BlackBerry is working on this issue?

  Anyone, please help...

  Thank you

  Bob

  Hi and welcome to the Forums!

  Could have happened to several things:

  (1) the proponent has misidentified something and the AppWorld catalog is messed up now

  (2) RIM has made a mistake and the AppWorld catalog is messed up now

  (3) there may be some technical problem that it blocks

  (4) I don't know there is more...

  As to your question:

  BOBJ says:
  BlackBerry is working on this issue?

  It is impossible for anyone here to know the answer to this. What I suggest is that you contact the developer of the app and report it. They have a different channel in RIM thanks to which they can increase getting AppWorld corrected to properly distribute their application.

  If you want to degenerate into RIM, you through your formal support channel - your carrier.

  Good luck!

• R710 IDRAC6 series via ssh: connect com2 returns COMMAND NOT RECOGNIZED

  Hello

  I configured successfully on ssh several times serial console redirection on different dell servers, but now I'm stuck with two R710s.

  The problem

  I can't use the connect command:

  /Admin1-> connect com2
  cmdstat
  status: 2
  status_tag: PROCESSING COMMAND FAILED
  error: 253
  error_tag: COMMAND NOT RECOGNIZED

  Configuration

  Version

  BIOS is 6.1.0, cli version output is:

  /Admin1-> version
  CLP SM Version: 1.0.2
  SM ME treat Version: 1.0.0b

  I have configured the redirection as before:

  BIOS

  Communication series	On with the Console via COM2 Redirection
  Address of the Serial Port	Device1 Serial = COM1, Serial Device2 = COM2
  Connector external series	Remote access equipment
  Failsafe baud rate	115200
  Remote Terminal type	VT100/VT220
  Redirection after boot	People with disabilities

  iDRAC

  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialBaudRate 115200
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialConsoleEnable 1
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialSshEnable 1
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialHistorySize 2000
  Value of the object successfully changed

  The command is now console, not connect.

  And that's exactly what is said in the docs - it's just that I had not noticed the change and read 'connect', where 'console' was written.

  A big thanks to Lars Handrick Support Dell Germany for reporting the change of command name for me.

• Mapped drives are not available. Machines inaccessible area. Can ping from command prompt.

  Hello

  Working in a Windows domain.  Have a 150 machines in the field.  Now, a single machine seems to have lost the authority to communicate.  This machine was a member of the domain for more than a year and has gained access to these places and several times of the mapped drives.  It's a user's machine, so not sure what may happen before this started.

  At the moment the machine is connected to the network.  I can browse internet fine (internet accessed through the default gateway).  At the command prompt I can ping machines on the domain by ip or name.  Both work very well.

  Can I use remote desktop to connect to other computers on the domain.

  What I can't see all the drives mapped or access the domain computers via Windows Explorer.  When I try to access a mapped drive (accessible by everyone) I gat an error message.  "The location is not available.

  When I try to select a machine in the field of windows Explorer I get 'open folder '.  \\XXXXX is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The specified network provider name is invalid.

  Tried this as multiple users.  Not the specific profile.  Tried under the Domain Admin and get the same error.

  Search error messages and found many solutions.  None worked.

  1 - removed from the field and joined.

  2 - disabled and enabled network card.

  3. cannot remove adapter, laptop.

  4 - withdrawn from the area, has changed its name, joined.

  5. deleted and added customer network Ms.

  6 checked svc of workstation was running.

  7 disabled the Windows Firewall.

  8. multiple antivirus scans run.

  9 - set network security: LAN authentication level manager' to 'Send LM and NTLM responses &'.»

  Any ideas?

  Thank you

  Found.  Want to share others.

  It was she.

  http://support.Microsoft.com/kb/170336/en-us

  The network logon order had disappeared.  Replaced by exporting from another machine.

• Command update the esxi update 5.1 to 5.1 2 via SSH

  Could someone send me the command update ESXi 5.1 5.1U2? (assuming I already downloaded and copied the update to the host)

  I know it's something like esxcli the software profile install d [something, something, etc.], but I think that I've got the syntax.

  THX!

  VMware KB: Installation of patches on an ESXi host from the command-line 5.x

  1. Download the update and transfer it to any store of data that is available for the ESXi host
  2. Connect to the host via SSH ESXi
  3. Put the ESXi host in maintenance mode.

  # vim - cmd hostsvc/maintenance_mode_enter

  4. go to the directory on the data store where the patch file was transferred to and verify that the file exists:

  # cdvmfs/volumes/Datastore/DirectoryName
  # ls

  Verify that you can see the file that you downloaded. I guess that the file you downloaded is in zip format. In this case,.

  5 # software esxcli vib install d ' "/vmfs/volumes/Datastore/DirectoryName/PatchName.zip".

  More options are in VMware KB. Please see that as well.

  See you soon.

• my hp lazer jet p1102w printer resume printing via airprint when not available

  Hello

  I have the hp lazer jet p1102w printer. I've upgraded to the latest firmware.

  What is not available in the printer paper and I reload, it does not resume printing via airprint in my ipad.

  especially when I want to print on both sides. I can't resume printing. What should I do?

  Hello

  Once you have loaded paper in the tray, open and close the printer cover. who will resume the print job and complete it.

  Shlomi

• Generate ACS V 4.1.1 23 aging via SSH password does not work.

  Hello, my name is Elias and I have problems with ACS via SSH password aging does not work and there is no meseges password sent by ACS console when I use SSH from aging. I know that there are problems with this, but I can't find any workaround or documentation that says that there is no workaroun. Can you help me with this?

  Greetings from the King.

  Hey Elias,.

  SSHv1 does not support the password as you can do in telnet. You must be

  running a version of the IOS which supports SSHv2.

  The following site explains which versions support this:

  http://www.Cisco.com/en/us/partner/products/SW/iosswrel/ps5207/products_feat

  ure_guide09186a00802045dc.html

  Rgds,

  somishra

• PNDH IP command is not available?

  Hello world

  I'll put up a 871 and I configured my tunnel0 interface, but I can't type in orders for ip PNDH.

  I currently have:

  interface Tunnel0

  bandwidth 1000

  10.10.10.20 IP address 255.255.255.0

  IP access-group 101 in

  no ip redirection

  no ip unreachable

  no ip proxy-arp

  IP 1400 MTU

  IP virtual-reassembly

  route IP cache flow

  IP tcp adjust-mss 1360

  dissemination of IP ospf network

  IP ospf priority 0

  source of tunnel FastEthernet4

  multipoint gre tunnel mode

  key to tunnel 10000

  Tunnel SDM_Profile1 ipsec protection profile

  end

  When I type in ip PNDH? I get an error of command not recognized.

  I have to activate before having the command available?

  Thank you

  Ali

  Hello

  A quick look at the function browser shows that PNDH must 'Advanced IP Services' or a "Enterprise Services IP" feature set. Or the other of those run you?

  HTH

  Andrew.

• Export command is not available

  Since a few days the command export is no longer available in InDesign CC 2015.

  PDF export presets work, but others are not available.

  Any suggestions?

  See: troubleshooting 101: replace, or 'trash' your InDesign preferences

• in the trial version that I wanted to try "photomerge" like on the video statement (via the expert mode, etc.). Is not available in the trial version?

  in the trial version that I wanted to try "photomerge" like on the video statement (via the expert mode, etc.). Is not available in the trial version?

  markn32062458 wrote:

  in the trial version that I wanted to try "photomerge" like on the video statement (via the expert mode, etc.). Is not available in the trial version?

  In PSE14, Photomerge has been moved to the 'guided changes' rather than the Expert mode.

  You can still access the same way in the Organizer: Edit menu > Photomerge.

• Looking for some practice files for video in line/book of "Adobe Photoshop CS5 Extended: Essentials. I use the tutorial via membership in Safari book online and the files are not available on Safari.  Do you know where I can get the files?

  Looking for some practice files for video in line/book of "Adobe Photoshop CS5 Extended: Essentials. I use the tutorial via membership in Safari book online and the files are not available on Safari.  Do you know where I can get the files?

  Looks like the manufacturer was "Total Training. I can't find the title to Adobe.com

  http://totaltraining.com/store/Photoshop-CS5-extended-Essentials/