I can't connect my computer to my printer?

Similar Questions

• Can't connect the computer to the printer wireless to work

  My HP 1102W works fine computer fron 1 (Win7). He has already worked on computer 2 (Vista Home Prem 64) but for some unknown reason, collapsed connect to it.

  I tried to reinstall, and during the installation, I get an error message "cannot find printer on the network.

  I can access my router since this computer so my network to the router link is good.

  The blue light on the printer is on while the printer is connected to the network.

  The printer works perfectly if I connect with a USB cable.

  Help, please

  Robert

  Printer not found when installing wireless network in Windows, try here

  http://support.HP.com/us-en/document/c02731427

• How can I connect my computer to my office remotely using mstsc.exe? (win xp pro sp3)

  How can I connect my computer to my office remotely using mstsc.exe? When I try the public ip address to our office, I just get the server computer, but I want Office away from my workstation?

  Hello

  You may have to contact the system admin of your workstation as they have disabled the remote access.

  However, you can consult this article for more information.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ts_cmd_mstsc.mspx?mfr=true

• How can I connect my computer laptop compac evo n1020 ATI Radeon IGP 340 m of my LCD

  Original title: Hello,.

  How can I connect my computer laptop compac evo n1020 ATI Radeon IGP 340 m of my LCD? do I need special drivers?

  Hello

  See the following articles for more information:

  Setting up dual monitor: two screens are better than one

  How to configure and use multiple monitors in Windows XP

• I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to open a session.

  I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to log on... I tried options menu that is to say; go to the last known working etc etc... but not good. Problem came when the wife has removed some material... not been able to get a blue screen connect etc. Since HELP!

  original title: help!

  If you have no Windows CD, you can not do a repair installation.

  If you have no Windows CD, the message from the moderator of the Forum Nicholas_W will not help you either.

  If the disk verification fails, there is no sense to try a repair installation because the file system was obviously some problems that must be fixed first (at least that is what I think).

  Wouldn't you want some ideas that actually work?

  The error:

  STOP: 0 X 00000024 0 X 00190203 0X82F42108, 0XC0000102, 0X00000000

  indicates a problem with your NTFS file system.  You can usually solve this by running chkdsk/r from the XP Recovery Console.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Computer says 4500 G510n is offline, the printer says it can not connect to computer

  I use a Mac OS X 10.5. The printer is recognized as an option for printing on the computer and the printer is properly connected to the wireless network, but the computer will not be printed because he says the printer is offline. Can I have help step by step? Thank you.

  What router?  Have reset you the printing system? :
  
  -Sys Prefs, printing and fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Can not connect to computer

  When I try to connect to my computer, my password does not work and it says user profile cannot be loaded. What does that mean? He just started this yesterday. I can't change my password because I do not have a disk. An advise please?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Need to change the connection information for Windows 8 - can not connect to computer because associate login hotmail account has been deleted

  Long story short - the email address associated with my Windows 8, log in to my desktop computer has been deleted and now I can't connect to my computer at all.  Is it possible to access my computer without having to take my computer to a technician to reinstall Windows 8?  Any help is appreciated, thanks!

  Hello

  I understand that you have removed the Hotmail account and Windows does not let you connect as a result of this deletion. Unfortunately, there is no other way to enter to account without using the password (if the account is active).

  You can see the Microsoft Account self-help recovery article and check.

  Recover your account

  If no help, I would recommend that you post your query in Windows Live ID support for assistance.

• can I connect my computer dell laptop to my xbox 360?

  How to connect my computer dell laptop to my xbox 360?

  Hi KenziePeterson

  
  What operating system is installed on the computer?

  
  I suggest you refer to the below provided help links on the connection of the laptop to Xbox 360.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-Windows-Media-Center-Extender

  http://Windows.Microsoft.com/en-us/Windows7/use-a-Windows-Media-Center-Extender

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

   

  I hope this helps.

• Why I can't connect my computer?

  I just got a new computer Windows 8 and had no problem to release or use it until two days ago. The alert says my password or user name is incorrect, but they are not. I have reset the password as a guest on several occasions, but I still can not in my computer. Can I access my account from microsoft with this info, but not my computer. It started when he installed that update. I'm starting to regret sincerely having chosen a windows computer.

  If you have changed the password on a website, your computer doesn't "know" as it gets on the Internet.  You need to use the old password - that your computer has stored (not that of the Web page).

  If you don't remember it, you can reset the built-in safe mode administrator account.  Here's how: http://cmdrkeene.com/reset-forgotten-windows-password

• can I connect my hp deskjet wireless printer to my al 17 hp slate in one?

  I have a new hp slate 17 can I connect my hp deskjet printer 1310 all-in-one wireless on it?

  ang53 wrote:

  Sorry it's a 1510.

  Hello

  No, it has only USB connection, it does not support wireless.

  http://support.HP.com/in-en/document/c03775352

  To make to support wireless now, you have more material according to your existing network and it would cost more to buy a printer Wireless ready right now.

  Kind regards.

• I can not connect my chromebook to hp2840 printer?

  printer doesn't print even when I plugged in the cable and add a printer he doesn t work either any suggestions?

  Hello

  Chromebook does not print with a direct USB connection, for such a, you must configure the printer with the Google Cloud Print via another PC or Mac service.

  You can follow these steps to use your printer with a Chromebook:

  http://support.HP.com/us-en/document/c04127429

  Kind regards

  Shlomi

• How can I connect another computer wireless to my counter top?

  Trying to connect to another computer wireless to my desktop for the internet. HOW?

  Hi KNoftz,

  You can follow these links and check if it helps.

  Set up a wireless network

  To connect to an available wireless network

  Hope the helps of information.

  Please post back and we do know.

• WPA - PSK, BEFW11SA, can not connect the computer to the network

  When I enable security wireless mode WPS Pre - Shared Key, algorithm, TKIP, a 9-character key and key group og renewal 3600 and then configure the computer, the computer is not connected to internet, even if the connection is recognized.

  When I created my Linksys BEFW11SA with "Wireless security" disabled, my computer has no problem connecting to the internet.

  Somehow, I'm sure that the problem is related to the configuration of the WPS, but I don't know what to do.

  I run XP sp 3. Router firmware version is 1.50.11, which I think is the last update (1.50.13 in mentioned on the home page of Linksys, but the corresponding version notes give the 1.50.11 version) the router does not have common WPS - PSK option with XP, so I couldn't try to use WPA2 or other options.

  Can someone please help?

  / JanB

  You tried the WPA key on your router and still it dosent work, you tried to secure your network using the WEP password. If it isn't then you can try settings WEP key password on your router and check if you are getting connected to your network on your laptop or not.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Now let's see if you can locate your wireless network and try to connect...

• WRT54G2 can not connect another computer

  I don't know what I'm doing. I have the router configured on this desktop very well, but he is hooked via the modem to it.  I have also the Wii work through a router very well.  How can I get my other office to connect through the router to get internet connection too?

  Is the desktop computer you want to connect to the router there a wired or wireless. If this is a thread, then you plug the Ethernet cable from your desktop computer to the router and you will be able to go online.

  If your desktop computer is a wireless network, you must locate the "Wireless network connection" icon, it will be in the system tray, right-click on it and select "View available Wireless Network"... Select your wireless network... If your network is secured then it will ask you the security key and click Connect. Once you are connected to your wireless network, open your Web browser on your computer and check if you are online.