command or the indicator?

Similar Questions

• Cannot create a control or the indicator for a refnum of the display of images in LabView

  I need to move a refnum to a control to display the Image, but find that I can not create a control or an indicator for such refnum.  I can create the refnum without problem, and when I right click on the refnum I gives me the options to create a command or the indicator; However, when I select one of these options no command or the indicator is created.

  I am running XP.  I installed Vision 8.6 at a given time, but had to uninstall because it damaged this control.  I don't know if it affects this type of control to a lower level.

  You can probably do it the hard way by using workaround.  Convert your reference to a Variant or flatten it into a string or cataloged full - some LV allows.  In the Subvi, convert it back into a reference.

  Bruce

• I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green.

  I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green. Of course, the drivers are missing but whom?

  original title: IPConfig and lack of internet access

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, starting with the card mother/chipset drivers.
  LAN, Audio, USB, SATA, etc, and so on.

  Note: If there is no XP driver listed, then your computer is not compatible Windows XP.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  =========================  IpConfig ===========================

  Open a command prompt window and type these two commands in the following
  order:
  (1) ipconfig/release
  (2) ipconfig / renew

  J W Stuart: http://www.pagestart.com

• "Navto" command within the overlay network does not not in Windows

  We have exactly the same problem as in this thread, just for Windows: "Navto" command within the overlay network does not not in Android

  There is some code in an overlay of web which should "navto" one other article, if there is no interaction with the screen after a defined period of time.

  
  

  But unfortunately our folio of test does not work on Windows. There is an error message indicating that no application is defined for navto links. Shouldn't the Viewer for content Windows catch these links?
  

  I have confirmed with our engineers navto in the meta tag is not supported on Windows. It will work in a , or via window.location in JavaScript, but not in the meta tag.

  Neil

• How can I get the indicator private Window to display?

  When you select new private window I don't see the indicator with the purple icon on the upper side right of the window. I have Firefox at work and when I open a new private window, it displays a purple icon on top of my new window, at home I do not see that.

  Thank you guys, by adding the extension to disable the navigation and adds the extension of the private LAN tab took care of my question, now, when a private tab is open I can see the purple mask flag.

• When I try to send an attachment with a PDFor JPEG, the indicator "sending" appears and never indicates that the document was "sent". He did not finish the task.

  When I try to send an attachment with a PDF or JPEG, the indicator "sent" is displayed and never indicates that the document was "sent". He did not finish the task.

  You have security software that may block the download?

• Firefox is very slow to respond when you open and almost always no longer meets the total even refusing to respond to the Task Manager "end program command @.» The ' does not not @ error also happens during navigation online.»

  Firefox is very slow to respond when you open and almost always unresponsive altogether, refusing even to respond to Manager task "End program" command. The "not responding" error message is also over browsing online. Several attempts must be made to get online. A loss of stability seems to be endemic at the present time.

  Try to follow the instructions here: Firefox crashes or does not - how to fix

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• How to move toward the front of the indicator chart of selected waveform

  Hello. I would like to put a number of indicators on the front (that's about 20 small flags or mauby more).

  When the user select one of them, the indicator is resized to the entire façade. The problem is that a number of small indicators appears as one resized was beneath them. I've looked everywhere and since 2010 (some people had the same problem) no solution has been found. I think property node with passage to the Front option has been added to labview (sp1 actualy 2015) - the problem, it is since 2010 - but unfortunately I can not find. Is there a solution to my problem?

  You could have a tab with hidden tab page selector. Have your small graphics on the first page and a single large graphic on the second page. When the user selects a small graphic in the first page, you programmatically move to the second page and feed the data required in the great chart. In this way it will look like magnified the selected chart. You can have a button of the left arrow on the second tab page that directs the user to the first page...

• Values of the indicator of multiple Points in a program

  Can I ask the impossible...

  I have a program that is a stacked three-frame sequence. In every picture there are structures case, in which there are while loops. In the while loop, it reads off the coast of the temperature of a piece of equipment.

  I would like to have an outlet on the front panel, "Temperature", which reads "get Temperature.vi"s in each image. See the image below. I'm out of my freaking mind trying?

  Allowing you to feed the output of Get Temp.vi in the local variable.  You can use the indicator in place of one of the local variables, but it doesn't matter where, because the locals break dataflow.

• How to reset the indicator of County of Terminal on the PXI-6608

  Dear community,

  Is it possible to reset the terminal number on the PXI-6608 indicator? When I use Get Attribute.vi I have the time to correct value first, but unfortunately (unlike DAQmx) reading of the value is not reset it...

  I like to keep track of how many times he flipped. And I don't want to use another counter to do because I like to keep them free for other things.

  Thank you!
  Case No.

  Traditional DAQ doesn't have a way to reset the indicator terminal number, as far as I know. One thing you might be able to do is change the "output" in "toggle" mode and then read the "output status" to determine the reversals to determine when the State of the output has changed in your application.

  I hope this helps!
  Gus...

• Current path of the VI is empty when connected to the indicator

  I'm building an ActiveX executable from another language (Visual Basic, C++, etc.).  So I need to create the object, the path of the vi.  I don't know why, but the planned path gives an error.  I wanted to check the way VI so I added an indicator to the current path of the VI.  The indicator is empty when I run the VI.  How can this be.

  LabVIEW 2010 SP1, Windows XP SP3

  VI was originally in LabVIEW 2009 and I have improved.  Some screws sub hepatitis was added from previous LabVIEWs (as far as version 6 if necessary).

  Thank you

  Javi

  So much worse... It follows from several things.  One is that when you click on a vi through a project the application path is different if you opened to the top of the vi.  And the other thing was using the open vi reference and methods to initialize controls.  Is it possible to delete an ad?

• The driver NI-VISA Wizard and command of the SCPI

  Hello

  I had a go with an assistant driver NI-VISA. I wanted to create a driver for MH3114 DAQ. Assistant hollow went very well, and the driver has been installed.

  However when I did * IDN? under MAX, I received an error.

  This means that I have to create/put into practice all SCPI commands?

  How the wizard is designed to work?

  Hi MimiKL,

  As Dennis said, instruments are designed to work with the SCPI commands or not. If the user guide does not indicate the device meets SCPI and SCPI commands will not work.

  The wizard of the driver simply generates a number of screws that will send the standard commands of the SCPI compliant instrument of the SCPI. Depending on how you communicate with the instrument (bus), you may need to change these screws subtly to work with different instruments. But, as mentioned, if the device you are trying to contact is not in line with SCPI then this is never going to work. Later, when you use the Assistant driver, all the subVIs generated will be have comments in them tell you exactly what to replace and change to get the driver working for your instrument.

  If your device is not in line with SCPI and you have a dll that works then you should continue to use it.

  Best regards

  Chris

• Add data from serial Port in the indicator series front panel?

  Hello! Everyone,
  I'm new to LabVIEW but has prior programming experience.

  I have to develop a front for my camera and this is why I need LabVIEW, data comes from serial Port, so I started internet research / LabVIEW forums and found various tutorials by the help I am able to do the part Serial Communication, but has got stuck in one thing.

  Whenever data from serial Port, it gets displayed on the indicator chain but clears quickly, but I want some data comes it does not erase the old data and new data to add with the old data.

  I read the string concatenation will work in this case, but I am not able to use it.

  Please take a look at my VI attached to this mail.

  You must use a shift register to keep your story.

  

  I recommend you go to some of the tutorials available.  They will help you a lot to get off on a lot of things like that.

  Introduction of 3 hours
  Introduction of 6 hours
  Bases LabVEW
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki
  OR learning
  Getting started with products OR

• Execution of multiple lines of command at the command prompt (windows)

  Hello

  I'm vascular using the command prompt in the windows to try to send a command to the microcontroller that is connected through TCP connection.

  I am able to use the normal cmd.exe to send the command but I am unable to send the command all successfully using labview.

  The Vi. I use the exec.vi system found in the labview connectivity section.

  Basically, I want to send is 'telnet A1' motion in the cmd.exe to establish a connection to the microcontroller, followed by "For A1 100 GO," which will be performed by the microcontroller to do what is necessary. But currently, the problem is that I can only establish a connection using the exec.vi system but can't send the second part of the message 'for A1 100 GB".

  My command line, I tried typing is cme.exe /K telnet A1 & for A1 100 GB. It seems that labview is only able to run the first part of the command. Y at - there no alternatives?

  Thank you for all your help.

  I suspect that there are problems of synchronization with this code. Forst, you should clean it to the top because it is very difficult to follow. Cables are hidden under objects, this is a lot bigger than a view type and the code is usually very disorganized. I also suggest that you look at using a state machine, but also a structure of the event to intercept the user interface events such as the Start button.