Comment to close "PCSync"?

Similar Questions

• Understand the memory host memory and comments tab

  Hello everyone!

  In the computer virtual host memory resource assignment tab and the host cpu resources consumed in the physical machine (esxi host) and the memory of comments is close to the resources consumed to the virtual machines guests, correct?
  
  Thank you

  Sena.

  SENA,

  The memory of the host is the amount of memory host the VM uses against what has been allocated to it (including overhead).

  The way I understand it, the area of memory comments shows how memory is allocated to the guest - host memory, swap, share, etc..

  Check out this yellow post - Bricks.com for many more details on the parameters of memory in vCenter http://www.yellow-bricks.com/2010/12/20/vcenter-and-memory-metrics/

  Hope this helps,

  Hersey

  VCAP4-DCA

  http://www.vhersey.com/

• winDbg farm

  Hello

  Offlate I have been bumping into windbg crash quite often, I am a new user of winDbg, so don't know where to look for what are the options I could try.

  There is a target machine windows I connect winDbg to via the TCP port. winDbg series pipe <->TCP port <->target Windows. WinDbg closed one off three times (1/3) when I run ".reboot" on the debugger.

  Please take note of this comment, winDbg closes but the pipe is still active. So when I try to re - open winDbg with the same pipe, he complains with "all pipe instances are busy.

  Not sure why winDbg closes / crashes or how to debug a crash windbg?

  AMD64 WinDbg:10.0.10240.9

  Target and windbg Windows are running on "Windows 7".

  Thank you.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Bug in blackBerry Smartphones: 9790: Wikitude does not and can not be upgraded

  Bug: 9790: Wikitude does not and can not be upgraded

  Priority: Low (assuming that no one will use Wikitude now anyway)

  Severity: low

  Note: I understand that this is not an application of RIM, but it is an application preinstalled in BlackBerry Bold 9790, so please take care of this. I tried to document the issue as much as possible.

  I can not re - test, simply because I don't know how to install the old version. So, these are the steps that I went to join bugs:

  (1) have a 9790 Bold with the BlackBerry OS 7.0 as it was officially sold

  (2) Upgrade Bundle 2466 (7.0.0.609 Platform 9.16.0.77)

  (3) fully upgrade all official software from RIM AppWorld (Protect, Facebook, etc)

  (4) to set the phone to use location services

  (5) launching Wikitude

  YOU CAN SEE:

  Wikitude starts and appears the window ' Version is no longer supported. " Please update"and the OK" "button.

  6) click on the OK"" button.

  COMMENT: Wikitude closes and opens the browser with the URL:

  http://blackberrydl.Mobilizy.mobi/Wikitude.jad

  Two buttons appear: 'Download' and 'Cancel' and box "application Set permissions."

  (7) check them "Set application permissions" box (same end-test result is observed with this box unchecked)

  8) click on the Download"" button.

  You can observe: window: "Wikitude: Wikitude GmbH contains a module called Wikitude.» A module with this name already exists in the application "Wikitude". If you continue "Wikitude" will be replaced by Wikitude:Wikitude GmbH. proceed? »

  Buttons 'Yes' and 'No' appears.

  9) click on the Yes"" button.

  Observe: Download process begins, download file with a size of 4366 KB

  You can observe: after the success of downloading a new window appears with the message 'Error' and 'Ok' and 'Détails' buttons

  10) click on the button "Details".

  You can watch: new window with the message "Invalid COD" appears and buttons "OK" and "copy".

  11) click on the OK"" button.

  You can observe: the window is closed and "Wikitude" application is not installed.

  Thank you! Problem solved. Here's what I did:

  (1) Wikitude uninstalled

  (2) installed from AppWorld Wikitude

  Result: Wikitude runs successfully

  (clear the cache of the browser and try to download browser do not work)

• What happens when an examiner saves a shared review file?

  Hello

  I sent PDF files for review of a few people using a link to the shared file on our network in an e-mail. Everything seems to work very well, but one of the reviewers said sometimes must stop his commenting to halfway through, that he does not want to publish his comments again. Thus, it records the review file to its own computer using the "save under". What happens when he does this? It creates a share full version of the file in revision that nobody else can share? If this is the case, is that it should copy his comments in the file shared its own version? Or if it publishes its own version, it will inform the shared file on the network?

  I'm curious to know what is happening with a "save under" it's because often my reviewers are asked if they want to save the file before closing, and they don't know what to do. I know that they can say 'No' and their comments are already saved, but what happens if they say 'Yes'? It records the shared version or create a new one?

  Kind regards

  zerozone110

  1. If the examiner wants to add comments, but not publish them, he can choose to 'Work offline' option drop-down menu button server icon in the bar of yellow color shown on top during the review.

  2 do a "Save as" does not create a new version. All comments added and published in this version will be present in the old control file as well and all other reveiwers. There is no need to copy the comments in return.

  3. If the reviewers add comments and close file without publication, they will be asked to save the file as a draft or publish comments or delete comments. They can choose to save it as a draft and go on adding comments in this copy, come back later and publish the unpublished comments.

  4. If all the commnts are published, there is no need to save the file. All comments can be recovered at any time by making a 'check for new comments.

  Help in answering your questions?

  Thank you

  -Bamboo

• Updated titles of pages programmatically

  Hi gurus of the APEX.
  
  We have an APEX application with several hundred pages. The application is translated also in other languages 2, so the total number of pages is considerable.
  Must prepend the titles of all pages with a few texts, according to certain rules. I was wondering if this can be done programmatically, something like:

  update (
  select * from apex_application_pages where application_id = 11751
  ) set PAGE_TITLE = 'ApEx Workshop Users' || ' ' || PAGE_TITLE

  Tried the piece of code above but I get:

  ORA-01031: insufficient privileges

  Do I have to put the code in a PL/SQL block and the value of certain things before you run the update?
  
  Thanks in advance for your help,
  Florin

  orlat84 wrote:
  Thank you guys for all the comments.
  Closer to the solution :). One last question, or there are in fact two :):
  1. the page templates can be internationalized? If Yes, then I will no longer need all the variables and everything will be just static.

  How much do you need to be translated. A suggestion given by Joel a few months ago was to use a substitution string and refer to the included in your model.

  I used several channels, for example OPERATOR_MSG which has the default operator.
  Whe translated the word operator gets translated and the translation is repeated automatically.

  Then you simply refer to it in your model as & OPERATOR_MSG.

  You are limited to about 20 of these messages (under the application - definition section)

  2. from your answer, I understand that affect the opinions of the APEX and the underlying tables is not really recommended :).

  It is correct. This isn't a good idea to do so.

• My installation closes with a comment: Installation on case-sensitive drives is not supported

  My installation closes with a comment: Installation on case-sensitive drives is not

  Hi BillW707

  Please visit: http://helpx.adobe.com/creative-suite/kb/error-case-sensitive-drives-supported.html

• After updating Firefox, trying to comment on results in a window that closes before loading and refreshes the YouTube page.

  After updated my Firefox to v.32.0.3, trying to comment or upvote a comment on YouTube results in a pop-up window brief which closed until it has loaded, then on the page YouTube refreshes. I tried to run Firefox with disabled modules, but the problem remains. Commenting on using a different browser (Chrome) works perfectly. Has anyone else encountered this problem? A few tips on how to solve it?

  Thank you!

  I was see this problem for many weeks now on 3 different computers - running Windows 8.1, 7 and Vista, respectively. I'm happy to report that I found the solution. In the Options-> privacy dialogue, you make an Exception for the 3rd party Cookies from Google.com. It's sad that OP should go through all this irrelevant advice.

• After installing the latest acrobat on my iPad, I can't comment on the PDF file (it automatically closes when I try to save)

  as described in the topic

  Hey huij59442525,

  Could you please check if the PDF file is protected and if commenting in the PDF file is allowed under "file > properties > Security.

  This happens with all the PDF files or a specific?

  Let me know.

  Kind regards

  Ana Maria

• Acrobat closes unexpectedly during the economy and then the files and comments are lost

  I work in acrobat pro x on a pdf of 300page.  I comment on the pages in the pdf file using Stickies.  I'm trying to save the file.  at halfway through the backup of the acrobat process to quit unexpectedly.  When I reopen it, he says he recovered the lost file - I click on it and says that the file cannot be opened and it is lost.  Happened yesterday also so about 4 hours of work down the drain!  is there a way to get around this?  Thanks for your suggestions.  If I can't comment on safely the pdf file, then the process of review/comment wrole becomes unusable...

  As you have seen, leaders from top of page and large file sizes documents can become unstable.  Add multiple comments of hundreds to such a document more contributes to the problem.  This is a great feature that everyone loves, but he is not all-powerful, as you have seen!  To avoid this, I always recommend export regularly comments in a .fdf file and always before the regular stops.  In this way, if your crash for some reason files, comments can easily be re-imported.  It is also advisable to have a backup version, the annotation to your document, as a matter of course.

  Other questions about are file size, CPU usage and, above all, the available memory.  These are usually the culprits in situations such as you described, although they provide without prior warning.  Indeed, the warning is usually when the file becomes unstable and behaves exactly as you described.  Although your machine can meet the minimum system requirements to run Acrobat X, when you get into this type of workflow, there is much more at stake than most users realize at the outset.  I wish he had the best information available to warn users in advance on these these situations, but I addressed this subject extensively in my book, 'The Guide PDF.' litigation

  Hope that helps!

  Jason Covey

  PDF Litigation Solutions, LLC

  www.pdflitigationguide.com

• Can EMC CX500 and ESX4 HCL - close comment EMC?

  Hi all

  Much wanted as operate ESX4 on our cx500. I realize that it is the end of LIFE and end of life is not before 2011. I was wondering if anyone knew if EMC intends to certify the CX300-400-500, etc. on ESX4? I really hate to subscribe to the upgrade of the forklift EMC every 2 years and the CX500 is still a viable unit, in my eyes.

  Someone at - it insights, advice or info if EMC is considering this?

  thnx

  Ah well, I'll try it without installing the agent.

• Since updating my iPad iOS 10, using the button home to close or open applications re works intermittently

  Since updating my i Pad for ios 10, the ability to close or restore applications open with a double-tap the home button, now does only intermittently.  Yesterday, it was not working.  Today, it was and I was able to close open approximately 20 applications. Now, it does not, once again.  I've seen some comments somewhere relative to other people with similar problems.

  Hello

  Go to settings-general - accessibility to the 'home' enable finger rest for Open button.

  Who can help.

  See you soon

  Brian

• When I close the lid on my MBP, it goes to "Standby" to "Hibernate" why?

  My MacBook Pro for six years had been working perfectly until about a month earlier, when he stopped to stay in Mode standby when I closed the lid.

  With the lid closed, initially, he goes to sleep, but after about 30 seconds, it goes into hibernation mode and to turn on again, I have to press the power button. I then get a grey screen and no use of the trackpad. Shortly after, the gray screen disappears and the machine works perfectly.

  The battery life is very good (68%), I have reset the SMC and I have not loaded the new software. The only thing I can think is that this started to occur at the time of the last update of Safari.

  Does anyone else have this problem?  Comments or suggestions are appreciated.  Thank you.

  Hello, Spring Lake Bob!

  Thank you for using communities Support from Apple. After reviewing your post, I understand that your MacBook Pro sleeps as expected when you close the lid. Instead, it goes into a hibernation mode that requires you to press the power button to interact with him again. I certainly understand wanting to make sure that the computer sleeps when it should wake up how it should. I'd be happy to help you!

  Get help with your situation, I would say using the article below the link to help isolate and solve the problem of sleep.

  If your Mac does not sleep or wake up when expected

  See you soon!

• Why Firefox 25.0 does not show Google ads and Facebook comments and love. Make all other browsers.

  I just upgraded to 25.0 FireFox and I have problems of visualization of Google ads and Facebook comments and love on my site (wellfitstyle.com). All other browsers show Google adds comments in the right sidebar and Facebook and like below each post. Many people in Eastern Europe (where I am) using FireFox and I would like to know how this problem can be solved.

  TNX.

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  The report please come back shortly.

• YouTube comments are not displayed

  When I look at a video on YouTube, the comments section does not load. Comments load with other browsers (e.g.Safari).

  This has happened since the change in the policies of YouTube comment, November 2013.

  Question product Forum Google "Why can I not see all the comments on Youtube?" showed the suggestions to disable Ad Block. I have Ad Block or not see it in my modules. Is there an another add-on which could be causing the YouTube comments do not to load?

  The problem is probably caused by lightbeam.

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.