Comments cannot load shared files...

Similar Questions

• 0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

  Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error 0X803C0107

    Details of the editor for Windows Firewall troubleshooting

    Verified issues

    You cannot access shared files and PrintersYou cannot access shared files and printers

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked

    No workingRemote Assistance remote assistance does not

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked

    Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked

    Windows Firewall service is not his firewall service is not started

    Windows Firewall service is not running or is not started. Checked

    Issues checked the details of the detection

    6 you cannot access shared files and printers checked

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.

    Unlock the file and printer sharing in Windows Firewall works not

    To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.

    6 remote assistance works not verified

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.

    Allow Remote Assistance in Windows not running Firewall

    Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.

    6 Windows Vista could not start Windows Firewall check

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Set permissions for the registry keys concerned not run

    Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.

  6 Windows Firewall service did not start Checked

  Windows Firewall service is not running or is not started.

  Start the Windows Firewall service is not running

  Start the Windows Firewall service solves this problem.

  Details of detection

  Collection information

  Computer name: NORMBRESINSKI

  Windows Version: 5.1

  Architecture: x 86

  Time: 09-20-2010 07:51:49

  Publisher details

  Troubleshooting Windows Firewall

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

  Package Version: 1.0

  Publisher: Microsoft Corporation

  You have problems with programs

• Error messages
• Recent changes to your computer
• What you have already tried to solve the problem

Hi Rickbsk,

You can check out the link and check the suggestions provided by scotty1294.

http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

If you have not tried all the suggestions above, try and see if it helps.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows cannot load a file of the registry classes.

  Not sure if the events of thous are related or not.

  Windows cannot load a file of the registry classes.

  DETAIL - unknown error

  -

  -

   

    1542

    0

    2

    0

    0

    0 x 8000000000000000

   

    59778

   

   

    Application

    -PC

   

   

  -

    Unspecified error

   

   

  The description for event ID 0 in source ICCS is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Service started

  Status of initialization of service objects.
  C:\Windows\system32\sppwinob.dll, msft:spp/windowsfunctionality/agent/7.0, 0 x 00000000, 0 x 00000000
  C:\Windows\system32\sppobjs.dll, msft:rm/algorithm/phone/1.0, 0 x 00000000, 0 x 00000000
  C:\Windows\system32\sppobjs.dll, msft:rm / 2005-pkey-algorithm, 0x00000000, 0x00000000
  C:\Windows\system32\sppobjs.dll, msft:spp/TaskScheduler/1.0, 0 x 00000000, 0 x 00000000
  C:\Windows\system32\sppobjs.dll, msft:spp/volume/services/kms/1.0, 0 x 00000000, 0 x 00000000
  C:\Windows\system32\sppobjs.dll, msft:spp/volume/services/kms/licenserenewal/1.0, 0 x 00000000, 0 x 00000000

  The Software Protection service made license status check.
  Application ID = 55 c 92734 d682 - 4 d 71-983e-d6ec3f16059f
  License status
  1: 5 - b65e - 01f5fc37-a99e - 45 c, 1 d762f3518ead, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  2: 2e7d060d-4714-40f2-9896-1e4f15b612ad, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  3: 3b965dfc - 31 d 9-4903-886f-873a0382776c, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  4: 586bc076-c93d-429a-afe5-a69fbc644e88, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  5: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  6: 5 - b889 - 2088b06738cb 5e35dc43 - 389b - 47, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  7: 6a7d5d8a-92af-4e6a-af4b-8fddaec800e5, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  8: 9ab82e0c-ffc9-4107-baa1-c65a8bd3ccc3, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  9: 9f83d90f-a151-4665-ae69-30b3f63ec659, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  10: a63275f4-530c-48a7-b0d3-4f00d688d151, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  11: b8a4bb91-69b1-460d-93f8-40e0670af04a, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  12: d2c04e90-c3dd-4260-b0f3-f845f5d27d64, 1, 1 [(0 [0 x 00000000, 1, 0], [(?)])] (?) (0 x 1 00000000 0 0 msft:rm/algorithm/bios/4.0 0 x 00000000 0) (?) (?) (?)]) (1) (2)]
  13: e68b141f-4dfa-4387-b3b7-e65c4889216e, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  14: ee4e1629-bcdc-4b42-a68f-b92e135f78d7 1: 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  15: 4a8149bb - 7 d 61-49f4-8822-82c7bf88d64b, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
  16: afd5f68f-b70f-4000-a21d-28dbc8be8b07 1: 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]

  I solved the problem by creating the new profile by running driver difficulty in this regard.

• When I install Flash Professional CC 2014, I get the error: DW039: cannot load deployment file

  When I install Flash Professional CC 2014, I get the error:

  Exit code: 16 Please see specific errors below for troubleshooting.

  For example, ERROR: DW039...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  ERROR: DW039: cannot load deployment file

  -------------------------------------------------------------------------------------

  I found the solution: please launch customer 'Creative cloud'-> preferences-> selection of the English language (International)-> restart the creative Cloud client and reinstall Flash CC 2014. It works for me. Before that, my language setting is Chinese.

  It is a bug, please fix as soon as POSSIBLE.

• ERROR: DW039: cannot load deployment file Lightroom 4.3

  I tried 3 times, including restarting but still get the same error once the application has download; oaded, ectracted and then begins the installation which is about 2%, then the installation fails with the error notice: DW039: cannot load deployment file!

  Hello

  Lightroom 4.3 fix for "install fails when the English (International) is selected ' is now LIVE.

  Please launch "Adobe Application Manager"-> click on username (upper-left)-> preferences-> English (International)-> Save selection. -> Click on the Lightroom Installer on the screen of the applet and Install should be successful.

  Lightroom will then be operational.

  If you see problems, breakdowns, please report on the forum

  Thanks and greetings

  Ajay jegou

• Why loadfile() cannot load the file on the web?

  I find loadfile() cannot load the file on the web (it may work to the Director and to the projector). I have try this simple example. Look at this picture:

  

  Very simple, I want to click on the button and the new objects (a pyramid and a sphere) will be added in the 3d scene.

  The scripts of the button are as follows:

  world stage

  on mouseUp me

  scene = member ("3dScene")

  put "scene.state =" & scene.state & RETURN after member ("t_Debug")

  scene.loadfile (the moviePath & "_LimnPanoResS.w3d", false, true)

  end

  To the Director and to the projector, it's OK. This photo is the snapshot of the projector:

  

  But when the files are placed on the web, it will not work. I find loadfile() cannot finish loading. The image of the snapshot is as follows:

  I put the whole movie here:

  http://wrongagain98.7b7b.info/testvr/test2.htm

  Check the status of the 3D Member, and I found that it is always 1. If it's normal, it can become or 4-1.

  Why? I use Director MX 2004.

  Using a packet sniffer, I see that your file please /testvr/_LimnPanoResS.w3d and that this (GET) request returns a 404 error. Are you sure you downloaded the W3D and that IIS has the correct MIME type added?

• Cannot load the file MatLab

  Hello

  I am trying to load a MatLab file using DIAdem 2011.  I downloaded the plugin from data from the Web site of NOR and installed.

  When I try to load a *. MAT file I get the following error.

  Unable to load the file "C:\Documents and Settings\All Users\My Documents\SignalExpress Data\08062012_104428_AM\voltage_current_ni_test1.mat" with the charger "MatLab."

  Additional information:
  Impossible to copy a block of data from the file 'C:\Documents and Settings\All my Data\08062012_104428_AM\voltage_current_ni_test1.mat Documents\SignalExpress' in the internal data.

  I never had any other use, by using plugins for DIAdem until I tried to condition a *. MAT file.

  Hi, smooth,

  MatLab use worked very well in the past.  My best guess is that this particular *.mat file may contain some data types (3D arrays, structures, etc.) that are not yet supported.  You have no way to verify what are the types of variables are stored in the *.mat file?  MatLab use works with all other *.mat files you have?

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• appvolume Setup is complete but get error below when opening the web app-volume Manager interface. Cannot start the volume App Manager "cannot load this file - tiny_tds.

  "failed to start volume App Manager" boot failure Unable to load the file of this type - tiny_tds

  

  Hi Paul amstaur,.

  This question says, I've met before, and there is a permission problem. Please do below things to get rid of.

  Since you have already installed the app volume, go back to the snapshot, or install a vanilla OS. Provide a sufficient permission in the local security policy, if you install SQL express as well as the volume of the app as the backup Administrator, debug as an administrator, log in as a service to the domain user. Also make sure the time is correct on the computer. You must restart the computer after you gave permission.  Most of the cases you already have full filled what mentioned above, but still you get an error.  To get rid of it, you must copy the appvolume installation files to the local directory, may be in the C drive and recommending only not to mount the ISO in virtual CD ROM, instead of copy and extract the ISO locally.  the next important thing is that you must run the setup.exe AppVolume run as administrator.

• I have 2 computers but cannot view shared files on a computer on the network.

  Help, please.
  Two computers running Windows XP home. Main computer can view files shared on the second. But the second computer has only its files shared in my network places. When I click View workplace computers, both computers are displayed, but when I try to open the main computer it says:

  "\\Supercomputer is not accessible. You might not have permission to use this network resource, contact the administrator of this server to find out if you have access permission.
  "Failed to connect to the user never would have been granted the type of logon required on this computer.

  I can't view a computers shared main folder on the second computer. But they can see and can ping each other.

  I use a Linksys WRT110 router. Main computer is connected through an Ethernet cable. Second computer is wireless. Two firewall is disabled. Someone please help. I am new to play with a network but I have intermediate level in computer science. I've searched and searched and found nothing working again. Any help is greatly appreciated.

  Joel

  Run on the supercomputer network configuration wizard.  If this doesn't fix the problem:

  1. download and install the Tools of the Windows 2003 Server Resource Kit .

  2. click on Start > all programs > Windows Resource Kit Tools > Shell .

  3. type these lines at the command prompt, exactly as shown:

  NET user guest/active: Yes
  NTRights + r SeNetworkLogonRight u comments
  NTRights - r SeDenyNetworkLogonRight u comments

• Satellite A60-723, cannot load DLL files at startup

  Hi, I bought an A60-723 for my education and one day I turned on my pc and it crashed, so I rebooted.

  When I rebooted there are scratches on the screen from the top down. Until the loading screen windows might appear, I had an error that a certain .sys is missing or damaged. I used the recovery cd, but it did not help .sys sometimes a another file was missing (examples: ntfs.sys, setupdd.sys)

  So I decited to format the entire disk. After that the bands would not disappear. And there was no error no that was asked to a bootable cd. So I inserted the windows xp pro cd and tried to install windows.

  While Setup was loading it crashed ad loading of DLL files, and an error has been reported error code 7, as well as another 4 error

  Here is a picture of the scratches that I was talking
  http://home.wanadoo.nl/vanhambol/PIC.jpg

  Just found out that if I push next to the touchpad then scratches disappear and I hold up my fingers they come back again: S

  Anyone know what I need to do?

  Hello

  About scratches, put service! There is something of physically wrong with your machine.

  Regarding the startup problem, (do this test before putting service to the band-problem!) first try to use the recovery CD. Retrieve the device and see what happens. Do you find these missing errors file? If this isn't the case, at the same time, cause a little. Try to see if there is a "connection" between the bands and the missing files.
  Get missing files-errors only when you see the scratches? Maybe these 2 problems are really from the same source.
  In this case they should both set if you turn service.

  Hope this helps you.

  BR

  Tom

• Cannot load MOV files within PDF documents in Firefox

  Tell me this has nothing to do with XP, but my problem report on the Firefox support site, you can find at the following link, https://support.mozilla.com/en-US/questions/831712#answer-199161, gave no solution, then maybe you can suggest a. And what relates to XP because the problem does not occur in Firefox on Windows 7 or Vista, but only on XP.

  I have a website that loads a PDF file in the browser. Within each PDF are links to MOV files that should open in floating windows. Unfortunately, XP when I click on these links I tells me that the file is not found. It seems clear that the cause of this is that XP is looking for the MOV files to the same directory that he downloaded the PDF. The links do not specify the directory of the MOV on the server because they are all in the same directory where the PDF file. If you change the link to include the way full on the server, starting with http://, then the url www.aslparataxis.info, then the directory where the relevant PDF file and finally the name of the MOV file, then the link works successfully. But it would be a huge job to change all these links in this way, since there are 540 of them. And their incorporation into PDF files is out of the question because he too in each PDF, allowing a very long download time. In addition, if the material on the site have been moved to another directory, all links must be redone.

  Internet Explorer doesn't have this problem on XP. And Firefox doesn't have this problem in Windows 7 or Vista. Again, I know that it should have more to do with Firefox Windows, but anyone can shed some light on how I can get Firefox (or Windows?) to know that on the server for these MOV files, it should look like?

  Thanks for your help.

  Hello

  If the problem appears only in firefox, then you work with Mozilla on this.

  Support for Mozilla Firefox

  You can try to perform a clean boot and check for the issue. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After resolve you your problem, you can follow the steps to configure Windows XP to start normally.

  Hope this information is useful.

• Cannot access shared files whne connected to the server

  Original title: dfs namespace access

  We have customers from windows 7 on windows 2008r2 domain. We have a couple of file hosting a dfs servers space names with file shares.

  This server hosts a common \\namespace\fileshare that is still available however 2 other \\namespace\share1 & 2 return cannot access this share when you are not connected to the server. This does not affect any clients, but affects enough that it becomes big problem being the only customer resolution of reconstruction. I tried adding and removing updates. I am at a loss what to try next.

  Any suggestion would be great.

  Thanks Mick

  I found the solution myself after a lot of googling and journal of trace events.

  After you configure wsus, it appeared that our Windows 7 clients suddenly received file sync (small green icon in the taskbar) couple this with an intermittent slow wan link. The fix was all right before you disable offline files. We never wanted their first place very frustrating, but we're still learning.

  It doesn't seem to affect all clients which is what got us thrown away but hey its works now.

  Thanks Mick

• Cannot load *.acsm file in app dig 4.5 Ed

  I have a tablet of haven of peace and downloaded the *.acsm e-books on
  my tablet, when I type the link then opens Digital Editions 4.5 but nothing
  is happening.

  How can I load my e-book in Digital Editions 4.5?

  • Brand and model of Tablet: Samsung Galaxy Tab has 9.7 Wifi model SM-T550 - Android version: see attachment
  • I downloaded *.acsm files for my buy ' d e-books and want to import them into the application Adobe Digital Editions 4.5, I want all of my eBooks (from Google search for books and other providers) in the same place: the application Adobe Digital Editions 4.5

  Thanks for any help in this matter.

  

  For E_ACT_NOT_READY, if you deauthoirze digital edition on the settings and reauthorize.

  If the download of the shop does not work. I can't just help. You can check if the work with other browsers?

• Cannot load the file DOC ID 109095.1 java stored procedure

  Hello. I'm trying to follow the documentation for 109095.1 (How to perform a system call to a Java Stored Procedure and capture the output) and after I try to load the java file I received the following two errors below. In some of the forum posts I met and performed various controls as well and from what I can tell, it seems that the java install my have broken or is not installed properly in the first place (unknown previous state). Some of the results of the checks are also lower.

  [dcampoy@prd oracle] $ loadjava u dcampoy / * - diagram t_super_user - v CaptureStream.java

  arguments: '-u' ' dcampoy / *' '-schema ' 't_super_user' '-v' "CaptureStream.java".

  creation: source T_SUPER_USER. CaptureStream

  loading: source T_SUPER_USER. CaptureStream

  Error creating source CaptureStream

  ORA-06550: line 1, column 75:

  PLS-00201: identifier ' DBMS_JAVA. SET_COMPILER_OPTION' must be declared

  ORA-06550: line 1, column 75:

  PL/SQL: Statement ignored

  ORA-06550: line 1, column 239:

  PLS-00201: identifier 'NameFromLastDDL' must be declared.

  ORA-06550: line 1, column 231:

  PL/SQL: Statement ignored

  Audits

  SQL > DESC DBMS_JAVA

  ERROR:

  ORA-04043: object DBMS_JAVA does not exist

  Runtime Environment Java was also (JAVA_HOME, $PATCH, and)$LD_LIBRARY_PATH)

  There are other tables with stored java information but I'm unable to find those queries I has used last week. I do remember every time they were ran zero rows were returned. I will try and get that information. Any assistance is much appreciated thank you.

  Thank you! That seemed to be the case because I had to install java in the database running the two files below sql. I also ran select it under check that java has not been installed. After installing both .sql files, I was able to download my java files successfully.

  SQL > @? / JavaVM/install/initjvm. SQL and

  SQL > @? / RDBMS/admin/catjava. SQL

  set line 200

  wrap off Set

  Col ComputerName format a20

  Select ComputerName, VERSION, dba_registry;

  COMPUTERNAME

  Version

  STATUS

  -------------------- ------------------------------ --------------------------------------------

  Oracle Enterprise Manager 11.2.0.3.0	VALID
  Oracle 11.2.0.3.0 database catalog	VALID
  Oracle 11.2.0.3.0 database Pack	VALID
  Oracle Real Application 11.2.0.3.0	VALID

• Registry cannot load the HIVE file; Need to fix WITHOUT the Recovery Console, computer will not play my Windows recovery disk.

  I need to fix my computer, I got the blue screen of death with the following error message. Registry cannot load the file \systemRoot\system32\config\SOFTWARE "HIVE".

  I read all the forums on how to solve this problem. I tried all the means which have been enumerated. None have worked so far because I can't get my CD player to load to run my Windows XP Pro disc to start the repair.

  Is there a way to fix this without the disc. I can't the computer after Windows XP display until he went blue. It's a computer original systemax, but I have since rebuilt it me with the new motherboard, hard disk, cdrom, dvdrom, ram, fans, cpu, etc... I just got a new monitor and hung up and blue screen of death appeared after that I turned the computer back on. I tried to fix this for 4 days now. Someone please HELP me.

  I got it fixed. THANK YOU SO MUCH for all your help!