commit before leaving the recording

Similar Questions

• Want to do a commit of goButton before launching the URL

  Hello
  I have a goButton on a data entry page that launches an Oracle reports report in a new window. When you press the goButton I first want to commit pending changes.
  
  If I use a goButton I can't find a way to commit before launching the report. The destination value is derived, but only gets derived once, when the button is rendered first, so can't use it. Looks like there should be a way to use the onClick to call javascript to do a commit. So far have not been able to find examples.
  
  If I use a command button, I can commit but do not know how to throw my URL. I suspect there is probably a way to do this from a managed bean. Yet once found no examples.
  
  Any thoughts?
  
  It is an application of 10g.
  
  Thank you
  Jim

  I think a command link would be the way to go - you can have generate a navigation event see:
  http://andrejusb.blogspot.com/2007/07/opening-report-window-in-ADF-faces.html

• Is it possible to enter into function twice before leaving?

  I have an executable that includes a user interface, and on the user interface, there are 2 Timer controls, each using the same callback function, but each timer is set at a different rate.  The reason this way of coding is not important, but the fact that it is coded like that is necessary to know to answer the question.

  The executable is single threaded, so it is expected that all flow of execution works in the order.  However, we have seen evidence, in a log file, the callback function to the two timers came twice before leaving.

  Excerpt from the log file:

  04 21 2014 12:29:03: leave<- -="">
  04 21 2014 12:29:03: entry-> - 29
  04 21 2014 12:29:03: leave<- -="">
  04 21 2014 12:29:03: entry-> - 24
  04 21 2014 12:29:04: leave<- -="">
  04 21 2014 12:29:04: entry-> - 30
  04 21 2014 12:29:04: entry-> - 28
  04 21 2014 12:29:04: leave<- -="">
  04 21 2014 12:29:04: leave<- -="">
  04 21 2014 12:29:04: entry-> - 30
  04 21 2014 12:29:04: leave<- -="">
  04 21 2014 12:29:04: entry-> - 31
  04 21 2014 12:29:04: leave<- -="">
  04 21 2014 12:29:04: entry-> - 30

  Where the fields are: length - message - time (using length = clock() between calls to the function of logging.)

  I can understand than two timers is not the value of the identical periods tick will conflict eventually, and might as well generate EVENT_TIMER_TICKs before each event is handled, but I expect not to see the workflow execution in the same C function (in this case our reminder) twice before the first call workflow execution stops.

  As it is that no application multi-threading level and there is no recursion, how does this happen? that is, he threw internal Threading or fiber deployed to invoke a timer of the UI control? (I always thought of the documentation of the Timer controls used strictly in the main thread, in contrast, Async timers, for example, running in a separate thread)

  "Timer events are not nested" is equivalent to entering a function twice before leaving the flow of execution. Basically, it's the same thing as recursion base: while you are inside a function, you call this function. The only difference between this case and the recurrence of basis is that the appeal of recursion is not explicit and implicit (via ProcessSystemEvents). But the end result is the same.

  I'm sorry, I couldn't find any documentation that explains that the individual counters are not reentrant (i.e. cannot fit). I was talking about what I know, but I couldn't find that it documented anywhere.

  The only reason why you have reentrancy in your case is because you have two timers, both using the same callback. If you have assigned different reminders for them, then you should be able to rely on no reentrancy for each function.

• Leaving the Remote Desktop application, the host closes all applications

  I used the wording of another post which did not have a clear answer: Oh yes, XP, Sp3 operating system

  Before you get a new computer at home I could Office remotely from my laptop to my desktop so I could sign out... then later sign in my office and all my programs would still be being run/open. This allowed me to restart or to view the current state of the tasks application...

  Now however I recntly received a newer computer and now when I do a remote session, programs of work great as long as I stay logged in, but, when I discoonect my remote session current in continuing my work in half an hour, everything seems fine. later, I connect to the computer through a remote session. Everything goes well as logins and passwords, but when the desktop applications. I had running before leaving the first time are closed. I checked several different setting and nothing seems to work. Someone at - he heard of this problem and what someone aware of a resolution.

  Thanks for any assistance regarding: my problem

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• When I run lightroom it keeps telling me "stop the other copy of lightroom before trying to launch."  I don't have another copy running.  What should I do?, when I run lightroom, it keeps telling me 'leave the other copy of lightroom before trying to inte

  When I run lightroom it tells me to "leave the other copy of lightroom before trying to launch."  I don't have another copy running.  What should I do?

  This is a new message that I heard no said just like that. This indicates that Lightroom is not normally arrested and left a record that makes Lightroom it's already underway when you try to start it again. With the help of Windows Explorer or the Finder (depending on your operating system) go to the folder that contains your Lightroom Catalog. In this folder you will find a folder with the same name as your catalog, but with .lock extension. You must remove this lock file, and then Lightroom should start normally.

• restrict the user to commit when scrolling to record

  Hello
  I am using developer 2000, and I want to restrict user access to validate the record on a form (not a table) before you scroll or enter the next album,.
  When I am using commit_form on key_nxtrec or on the post-text-point triggers the error appears, it is
  FRM-40737 illegal commit procedure limited to the post text point
  What should I do, please help
  
  Kind regards

  I already said in my question that it does not work in key elements of so

  COMMIT_FORM should work in KEY triggers without any problem.

  The reason I want the user to engage is that I am also sending the changes of the user to the global variables and the same insertion into a table to keep the username and its > changes (like a log)

  Instead of using GLOBALS for a newspaper (which leads to these requirements "unusual" and "unusual" behavior of dialog boxes), I'd go with the triggers of transactiional. These fires separately for each record and there is therefore no need to 'follow' any changes outside the records. You can either use clinet-side-triggers INSERT pre, pre UPDATE and DELETE triggers in forms or servser-side FRONT INSERT/UPDATE/DELETE FOR EACH ROW triggers directly in the database.

• How to detect the window closing event and to do some tasks before leaving

  Hello

  Someone knows how to detect the window closing event and to do some tasks before leaving?

  Sridhar

  Structure of the event allows to detect the window closing event. In the structure of the event,.

  Select this VI-> close round table for this task. See attached picture.

• Trying to register for a developer event SW in Finland. But the record window disappears before saying what happened.

  I am trying to register for a developer event in Finland using MS Live ID SW, but disappears from the record window before saying what happened.
  What should do? Contact person?
  The event is called 3 Amigos & Gal.
  Called MS Finland - person seems to know, they move me just for the next person. Who knows the support to developers?
  PS. It was the support person of the Finland MS who advised me to use this site.

  Hello

  If the problem is specific to Firefox, then I suggest you to send your request to:

  Firefox Support Forum

  http://support.Mozilla.org/en-us/questions

  You can also connect with Firefox for known problems.

  http://support.Mozilla.org/en-us/home

• REGEXP: Count the number of commas before a given tank

  Hi guys,.
  
  I was wondering if this is possible? I want to count the number of commas ',' before a given string.
  
  For example:
  Let's say I have this string:
  

  SELECT 'Hello', 
         dump('Hello {The ')
    FROM dual;

  Which returns:
  

  'HELLO'        DUMP('HELLO{THE')                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
  ------------------ -----------------------------------
  Hello                            Typ=96 Len=11: 72,101,108,108,111,32,123,84,104,101,32

  I was wondering if it is possible to count all commas before the 123 tank? In this example, it should return 6
  Can anyone help?
  
  Thank you

  Something more in this sense then...

  SQL> ed
  Wrote file afiedt.buf
  
    1  with t as (select dump('Hello {The ') as dmp from dual)
    2  --
    3  select length(regexp_replace(regexp_substr(dmp,'[^ ]+,123',1,1),'[^,]')) as str
    4* from t
  SQL> /
  
         STR
  ----------
           6
  
  SQL>
  

• How low should I leave the battery on my MacBook Pro before I recharge

  I have a new MacBook Pro and I know that once a month I'm supposed to leave the battery discharged.  But how low should it let?

  Don't let the battery discharge to 0. You must load whenever it is convenient. There is no battery memory as the old batteries so you can load any level of discharge.

• Value of cluster lost when you leave the structure of the case

  Hi all

  I'm having a problem with a particular VI I'm working. (FYI it's in Labview 8.0)

  The VI is set to run a current source, voltmeter and thermometer, then recording and graph the data in various ways that can be selected by the user.

  Everything seems to work fine except a particular graphic method. When I try to graph current compared to the tension, the current value is lost estates. In a case the current and voltage are combined to form a cluster, and then leave the case structure to be later appended to a table of cluster.

  However, the value of the cluster is lost when the chart is set for the voltage vs. Any other method and it works correctly.

  I can't understand why this is happening as it does not make much sense than other methods of work charts, but this one isn't when it is coded the same exact other than having the different variables.

  I have attached the VI with added indicators showing that the value of cluster is lost once he leaves the box structure. Any help would be appreciated.

  Thank you very much and I apologize for my extremely messy VI.

  -Nathan Cernetic

  You really need to boil this down to something we can run and reproduce the problem.

  Have you tried to break a few relevant connections and rewire? Something is possibly corrupt.

  Besides being a mess, your VI has quite a few glaring errors.

  Let's take a look at the structures at the top right:

  • 90% of the code is the same in all the structures of three cases, so all that needs to be inside the structure is the small part where you built the table 2D. All the rest is outside of the case.
  • The structure of the sequence has no useful function.
  • Why do you need to reverse the table with each iteration of the small loop FOR? Once before the loop would be sufficient. Right?
  • Why you use table built inside the small loop FOR, but no autoindex on the edge of the loop? All you ever get is an array containing exactly one element, no matter how the loop runs. Seems unnecessary! (see below for an alternative image).
  • You wouldn't even need to reverse if you want to use "built the table" instead of "insert into the table at position 0" in the central part.

  

  Other: You constantly hammer all nodes of your property. The only need that will be called when things change. Again, you have far too many cases. For example, in the structure of the case where you are having problems, the same nodes of property exist in all cases. A single instance of the property node belong outside the case and only the string inside each case constants. Whenever the code is the same in all cases a case structure, which code belongs to the outside!

• Rich Table: entity validation fails, but the user can change the record! : O

  Hello
  I develop with JDeveloper 11.1.2.1.0 and I have the following problem. I have a rich table editable according to entity/view with a line entity level validator method that checks the consistency of rank according to custom rules.
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?
  Thank you
  
  Roberto

  Roberto R SCC wrote:
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I > know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?

  When you change a line, it is the currentRow on the iterator. You do not want any line to become the currentRow.
  I would go to this topic, in this way: substitute the selectionListener table and the listener to custom selection, check if the current currentRow (the one you are editing) isValid (EntityImpl::isValid).
  Proceed with the treatment of the selection event only if it is validated... You could even show an error or a warning message asking the user to provide valid data and even commit the line before choosing another.
  (Sorry, don't have an example of a code of practice now)

• How can I configure my Mozilla Thunderbird to me for new confirmed before leaving?

  I used to use Microsoft outlook. In outlook, we use the button 'close' at the top right of a mail to close this letter.
  In thunderbird, this 'x' is available on the top somewhere in the middle.

  To close a mail, I click on the upper right corner by mistake and the release of Thunderbird (which I didn't) by mistake.

  How can I configure my Mozilla Thunderbird to me for new confirmed before leaving?

  As far as I can see there is no easy way to do this. However, an easy option is to have the Thunderbird in the system tray on hitting the close instead of closing button. The add-on "Minimize on start and close" for Thunderbird accomplishes this mission and to close all what you need to do is right-click on the icon in the taskbar, and then click close to close actually it. I hope this helps.

• Thunderbird eliminated most of the records online and will not let me create new ones to replace them and read email stored in them.

  In order to remove online a large number of files in a folder (a folder IMAP?), I deleted the folder and then created a new folder with the same name. The next time I open Thunderbird, all my online except sent and trash folders disappeared, and I could not re - create files that have been deleted. I can't access the files stored in these folders or move files in folders bearing the names of deleted files. I can create files with names not used before. But I can't create a new folder of Junk to hold files that Thunderbird regularly sends to junk. I do not receive e-mail in the process. Local folders are not affected hereby. What can I do? I have Thunderbird 24.5.0. Thanks for any help.

  Go to file / subscription and see if you just without subscription to records.

  Check folders and make sure EVERYTHING is checked.

  Learn how to use several methods of selection and do not delete the records that you want to keep.

  control + a = select all

  Click heading 1, move upwards or downwards several items and maintain the SHIFT key while clicking the point 2 = selects items 1 and 2, and between the two

  Hold down the CTRL key while clicking random objects = selects any element clicked on

  Hold down the CTRL key while clicking on a selected item = deselect this item

• On a page at random, Firefox briefly displays the start page by leaving the program.

  When I am browsing a web site randomly and I click on the close button in the upper right, Firefox briefly displays my start page (google) before leaving.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/