How to re-enable the downloadhelper?

Similar Questions

• How can I enable the memory remapping in BIOS on the Satellite A100-192

  Hello!
  How can I enable the memory remapping in BIOS (5.90) on my laptop?

  Thank you.

  Hello

  It seems a problem with the Microsoft 32-bit Windows operating system.

  Please check this:
  http://support.toshiba-tro.de/KB0/TSB7601WE0007R01.htm

  You can find this info:

  _Issue: _
  I put in the memory 2x2gb in my book * and the BIOS * and the operating system is worth about 3 GB

  _Solution: _
  This is a limitation of the 32-bit system.
  System resources need of addressing which overlaps physical memory below 4 GB.
  These requirements can reduce available addressable memory space to and reported by the operating system

• I don't know how to re-enable the microphone of the headset on my Acer Aspire E15

  Hello

  I have a big problem with my laptop, I don't know how to re-enable the microphone of the headset on my Acer Aspire E15

  I was able to remedy.

  Here is the solution: http://community.acer.com/t5/E-and-M-Series-Laptops/Headset-microphone-is-not-working-on-Aspire-E14-...

• How can we enable the html mode of the e-mail to the 9800 blackberry Simulator

  How can we enable the html mode of the e-mail to the 9800 blackberry Simulator?

  When I sent messages html Simulator, it only shows text.

  the Simulator does not support html emails

• How to re-enable the 30 day on acrobat XI track

  How to re-enable the track on acrobat XI for 30 days?

  Purchase a license. Once you have used your 30 day period, that's all.

• How to re-enable the Welcome screen?

  How to re-enable the Welcome screen in CS3?
  
  I pressed on "don't show this lame form ever", now I need... cause its apparently the only way that you can start a new doc from Adobe AIR, depending on their first time manual. How clever...

  preferences
  --> General
  --> Launch:

• How can I enable the memory remapping?

  I want to know the steps I must follow to enable the memory remapping. what I should I look for in the search bar of windows, the run menu, etc..

  Hello

  -What is the operating system installed on your computer?
   
  To enable the memory remapping, I suggest you enable in the BIOS and check if it helps.
  BIOS - how to enter the BIOS?
  Each computer is different, when you turn on the computer, it should tell you what button to push to get into the BIOS. This is usually one of the following values, and you have to push it in the first 5 seconds: F1 F2 F10 F12 ESC LED
  Once in the BIOS find the menu with the remapping of memory, it is different on each computer.
   
  Enable memory remapping feature
  Check the BIOS settings to see if the memory remapping feature is enabled. Remapping memory access Windows for more memory. You can enable the memory remapping feature in the BIOS by starting the configuration of the system. See the Guide to your computer for instructions on starting the installation of the system on your computer. The name of the memory remapping feature may be different for different hardware vendors. This may be listed as remapping memory, memory expansion, or something similar. Don't forget that your computer can not supported the memory remapping feature.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   
  For reference:
  Usable memory may be less than the memory installed on Windows 7 computers:
  http://support.Microsoft.com/kb/978610
   
  Hope this information helps.

• How to re-enable the automatic updates after that malware disabled?

  How to re-enable to THE / settings WU & firewall after removal of malicious software from a windows xp pc? As malware has disabled them. Is there a quick way to solve this?

  Hi BrianMedojevic,

  How to configure and use automatic updates in Windows, please see the following article:

  http://support.Microsoft.com/kb/306525

  I hope this helps!

• How to disable / enable the url at the bottom of page?

  When I print a document the URL is printed at the bottom of page. How can I enable / disable that?

  I have a HP Envy 4500

  Hello @Ertmania,

  Welcome to the Forums of HP Support! I can't see when you print pages on the Internet you always get the URLS of the Web Pages at the bottom of the page. It is a simple and easy solution, please follow the steps below:

  1. open your Internet Explorer browser

  2. in the upper right corner, click on the option of the gear (settings)

  3. go to print and layout

  4. under the heading headers and footers of ensure that footers is empty

  I hope this helps!

  Thank you

• How to re-enable the touchpad on samsung netbook

  Hi, I use a samsung netbook n150, loaded with the software of windows 7. I found that on the samsung touchpad is too sensitive and decided to turn it off and use the mouse. I think that I have disabled this is going in a maintenance program, but can't seem to locate the same program again. It has been a few months (I don't use the laptop which is often). Now, I found that there is a function key that allows enabling/disabling quick and painless, but pressing the function keys do not seem to re-enable the touchpad.

  Anyone know how of reactive programs? Samsung has its set of simple maintenance program, but do not seem to have anything on this.

  Check the status of the device in the Device Manager under Computer Management console: perhaps the touchpad is disabled or uninstalled and you can reactivate it or force the detection of changes of material.

  Try pressing WIN + X to launch Windows Mobility Center and look for any kind of option that could be useful to reactivate the touchpad.

  Good bye.

• How can I enable the GPU option on a new mac pro with 2 AMD D700 graphics cards?

  I recently bought the new mac pro, and I saw the option GPU is not activate and acknowledges that the CPU one, which is frustrating. Does anyone know how to enable the GPU option?

  Thank you

  See this for more details about how the GPU is used in After Effects:

  http://blogs.Adobe.com/AfterEffects/2012/05/GPU-CUDA-OpenGL-features-in-after-effects-CS6. HTML

  Note that your card will be used for all the features of GPU - but the 3D rendering acceleration traced the beam - requires a Nvidia GPU. This is a deprecated feature that you don't need to worry about anyway. There are a lot of better alternatives to the use of 3D in After Effects, Cinema 4 d, including the who now comes with After Effects:

  fects.html http://blogs.adobe.com/AfterEffects/2013/04/details-of-Cinema-4D-Integration-with-after-EF

• Satellite Pro A200 - 1 MI: how to re-enable the touchpad

  Hello

  I recently bought a new Satellite Pro A200 - 1 MI (psae7e). Thing is that while I was using it at the start there was this allocation at the beginning which allowed us to use the shortcut keyboard (fn + keys) on the screen.
  It was at the top of the screen.

  So I clicked on the tab to disable my touchpad but now I can't seem to activate the touchpad and accidentally closed this keyboard shortcut help too.

  So all tried to re-enable the touchpad; reinstalled driver, tried to install the touchpad power and everything...

  Please help me.
  If there are questions to ask...
  I really hope that someone could find an answer for me.

  Thanks in advance,
  Sabil

  Hello Sabil

  You can restart Flash cards: start > all programs > Toshiba > utilities > settings for Flash cards. Open these settings and clear the check box in front of the option to disable.
  I hope that you will be able to use Flash cards again.

• Satellite A100-529: How can I enable the wireless network adapter

  Hi all!

  I'm new here, but I want to know how can I activate the wireless network device. On my Toshiba Satellite A100-529 keyboard is a Fn key that must be pressed with the F8 key to turn on the wireless network device. I did, but it does not work.

  What can I do to turn on my wireless device?
  Thank you!

  You are right. The FN + F8 key combination should be used to switch to the WLan card.

  But look, man. Have you checked if your laptop supports wireless network card?
  I think it does not support the minPCI wireless network card and the card does not exist!

  That's why the WLan card cannot be activated :) you know ;)

• How to re-enable the alert "maximum event log size is reached" Pop up

  How dose you reactivate the alert pop-up that appears when the event log is full? I used to get a popup alert informing me that the newspaper had reached its maximum. size is specified in Console of Managment computer that allows me to save and clear the log. Now, the log file fills up without notice.

  This can be solved by using a combination of the Microsoft KB articles.

  1. use the "Circumvention" of MSKB843021 (http://support.microsoft.com/kb/843021/en-us)

  2. use registry edit of MSKB243625 (http://support.microsoft.com/kb/243625/en-us

  Although these two KB articles are for different versions of Microsoft Windows Desktop operating systems

  Return WXP SP2 and W2k, I tested successfully on a computer that is running Windows XP SP3 home edition in a VMware Workstation7 environment.

• How to re-enable the XP Task Manager, error "disabled by the administrator.

  How to re - activate the Task Manager?  I get an error message "disabled by administor". And Yes, that would be me.  :)

  One of them should take care of your problem:

  "Error"Task manager has been disabled by your administrator"
  <>http://support.Microsoft.com/kb/555546 >

  ""Task manager has been disabled by your administrator"error message.
    <>http://support.Microsoft.com/kb/555480 >

  HTH,
  JW