Communication series with ANSI emulation

Similar Questions

• Communication series with Mettler Toledo 205 XS

  Hey guys,.

  I'm in the process of establishing a communication series between my PC and a microphone Mettler Toledo (XS-205) balance. The Balance is connected via an RS 232 cable to the adapter USB TU-S9, then to the PC. I do not see the port in the MAX of NOR and via the test Panel, I put the configuration of the communication according to those of my balance:

  BD rate: 9600

  Bit\Parity: 8 / no

  Stop bits: 1

  Handshake: no

  EndofLine: LF

  CharSet: Ansi\Win (only within the balance)

  Continuous mode: OFF ("");

  now, the fact is that if I try to query the command * IDN? \n I get as a response

  1: write operation (* IDN? \n)

  Back County: 6 bytes

  2: read operation
  Back County: 17 bytes
  S\sS\s\s\s-0.0006\s\sg\n

  with an error in the data returned (Hex 0xBFFF006C). I also tried to use the script provided by the site OR Mettler-Toledo scales, but I get all the data and at the end of the routine, I get error VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  Everyone as an indication of what's going on? Thank you much for the help

  See you soon!

  Thank you guys for the quick responses.

  my mistake. Mettler Toledo balances does not accept the SCPI standard commands, but they have their own defined standardized command.

  Thanks anyway

• communication series with VISA

  I'm trying to communcate with a power supply via a serial connection.  Communication works very well in Hyperterminal and putty, but I can't seem to run in labview.  It times out when trying to read the data.

  Hyperterminal parameters are the basis of everything and it works fine

  9600 baud

  8 data bits

  no parity

  1 stop bit

  no flow control

  Send "VOLT?" with CTRL + J for line break

  Returns under the voltage at the output of the UUT.

  I wonder if I send you the incorrect order in labview.  Any help would be great.  I have attached the VI, it's my first try at comms series so it's pretty baisc and I do not know I'm missing something

  You are not sending the line break.  You send only "Volt"?

  Make a right click on the string constant, visible display style and make \codes show.  Then enter \n at the end.  Now you send VOLT? with the line break.

  In addition, remove the shift regsiters on the son of reference and error.  (A single time-out error will keep your VI to run again until you stop and restart the VI)

  And put a close VISA outside the loop.

  

• Communication series with visa, need help

  IM G-codes(which is a string in this case) sending to my Board of Directors, Im using the structure of the event choose sent a code that, when sending as string constants program runs without problems, but when Im getting the format string to string program dosnt sent the code in this case, but its present when events change (so in other cases it works too previous)

  problem can be seen in the performance of climax too

  I will ask once again: do you need to send a character of endpoint with your order?

  Your 4 character button events 'home' have all orders ending in the line.  Other events are not.  My guess is that the unit does not recoginize newline character he received a valid full command until he got the line.

  PS: Those who touch terminals that belong in their boxes of the discipline concerned.

• Communication series with Miteq switching system

  Hello

  I am trying to contact a Miteq redundant switching system 1:8 for high power amplifier.

  My VI gives me an error of framing. I have already read the thread on the mistake of framing posted here and made sure my port is configured to match the settings of the device.

  (Data bits - 7; Parity - same, baud rate (9600) equipment is silent about data flow and the stop bits, (I guess NONE and 1.0 respectively)

  I use a laptop with a USB port. I have a USB-serial cable of NOR. I use an IC -? 855 RS232-RS485 converter because the system is RS485. I already checked the pinout for the port that I use a fact a connector corresponding Tx + in the converter with Rx +; TX - Rx-; and the other two wires are connected as well.

  I opened MAX and tried to write directly to the VISA driver, but I get an error as well.

  I do not know if the manual is just, he is a former switch and someone could have changed the port connections.

  Y at - it a trick to know what is the link?

  I'd appreciate any thoughts here

  Thank you very much

  Hi Jeff,

  I can't open the link you sent, but we finally thought that the problem is the connection of broaching. Me not according to the manual or any document we have.

  Sorry I did not before.

  Thank you very much for answering!

• Writing of multiple orders with communication series

  Hello

  I'm quite familiar with the basics of LabVIEW, but I'm new to communication series with VISA. I had no chance of finding a solution to my problem, but it is similar: http://forums.ni.com/t5/LabVIEW/VISA-read-write-to-serial-port-Unable-to-impelement-multiple/td-p/93....

  I am able to send a command and read the response with the device, but I can't send several commands to change the settings of the device. For example, I send 'F' to the device to read the current operating frequency and read the response (22). But if I send 'f' to the device to change the operating frequency, read the answer ('send frequency... (''), then send my desired frequency (120), I get no response.

  The default frequency at the opening of the port of the unit is 22. I would like to change the frequency to 120, then read the current operating frequency to ensure that it was indeed changed.

  I'm confused about the format of data to be sent in LabVIEW. In MatLab, it works fine if I send 'f' as a character (fwrite), followed by the desired integer frequency. However, in LabVIEW, it seems that the number I want to send is not read correctly. I have tried to cast the integer to a string and read that the slash code, hexadecimal, normal code, all I could think about.

  Help, please

  This give a try. Press the button "Prepare", followed by the 'Set Freq' button. You need to configure your serial port properly first well.

• Communication series

  Hello

  I'm using communications series VISA in my vi to communicate with the hardware. My laptop has two COM COM1 and COM2 ports. I'll be using VISA configure a serial port to set specific Com Port.

  COM port will be indicated by using the name of resource VISA. I should know the status of com before another operation takes place. IE say I chose com2 on behalf of the resource for the COM port configuration, but I connected the hardware serial cable on COM1. How can I know the difference? I tried the line of the error checking, but unfortunately his does give no error since the COM1 is present in the laptop.

  Thanking you,

  sushmith

  Hello

  The idea would be to write * IDN? (or you can select the order based on the expected answer your device connected to COM port) command individually, to the COM port

  This should return the identification of the unit (or a known response) of the device connected to the COM port when trying to read the data for the number of available bytes to the port.

  If the returned string is empty (or not the expected answer) then that would mean that no device is connected to the COM port.

• Communication problem with the printer

  I'm trying to print on a printer Lexmark 1200 series of a Toshiba laptop. Laptop computer identifies the printer is the printer is displayed in the control panel. Whenever I try to print even if I get a message that says: "communication problem with the printer. Any help is appreciated.

  Hi Nick,

  1. What is the exact model of the printer number?

  2 is this problem limited to any specific application such as Internet Explorer, Microsoft Word etc.?

  It seems that some of the 1200 Series printers is not compatible with Windows 7. You can enter the number of exact model and research for more information.

  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=lexmark%2B1200%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  If the printer is compatible and you are always faced with the question, you can proceed with the steps.

  Method 1:

  Run the troubleshooter and update printer drivers.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  If the problem persists. I suggest you perform the steps described in the article.

  "Communication not available" or "Document Failed to Print" Error Message and the print job hangs in the print queue

  http://support.Lexmark.com/index?page=content&ID=SO4473&locale=en&UserLocale=en_US

  Note: Antivirus software can help protect your computer against viruses and other security threats. Have a computer without any security software can cause a potential danger to your computer. Therefore, make sure to activate the firewall and security software once you are finished with the test.

  Hope this information helps. Response with status so that we can help you.

• Management communication series through liaison camera card

  I have a card OR cameralink and want to handle the integration of a camera time using the controls of the camera series.  Is it possible to place orders of series using other software like MatLab (heresy I know)...

  My experience using MATLAB is absent, but if you can call the C API for IMAQ, then you should be able to do.  You can take a look at the help of the reference of the NOR-IMAQ function and specifically examine the functions of Communication series under features low level.

• That engine run time is necessary for communication series build Setup

  That engine run time is necessary for communication series build Setup

  You need NI-VISA. If you are using a National Instruments serial port card or device, then you also need OR Serial. All software can be found in the Technical Support page.

  Obviously, you have also the runtime for the software development environment itself as well. For example, for LabVIEW, you need to the LabVIEW Run-Time.

• On the Sync Palm m500 using connection series with a dock under Windows 7

  Palm: m500

  Link: Serial (cradle)

  OS: Windows 7

  Problem: Palm Desktop 4.1.4 cannot be installed and does not synchronize Palm Desktop 6 using the serial connection.

  How can I synchronize the m500 using connection series with a version of PD under Windows 7?

  Nevermind, helped http://forum.brighthand.com/sync-windows-palm-os/261651-synching-legacy-pim-databases-palm-desktop-v-6-2-a.html .

• Get "communication error with kernel" message when you try to run a virus scan program

  Get "communication error with kernel" message when you try to run a virus scan program

  Hello

  What antivirus do you use?

  Follow the steps in the article mentioned below and check if this solves the problem.

  
  The error message "error communicating with kernel":
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

• Windows Media Player will not play a DVD, I have a series with yellow mark Driver

  I got it, (cannot display the web page) twice, once when I updated one of the display, drivers, (I didn't roll back to the old.. 2nd time, I found that (work offline) to int, Explorer, had checked sort.)  u can tell me what that non plug and play, pilot of the series might be for? I see the same driver identical series with yellow mark, it does not prevent me to get online, is the only problem I have, Windows Media Player, do not play a DVD!

  1. check the status of the device in Device Manager. Follow the steps for the same thing:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  c. in the Device Manager window, locate the CD/DVD drive and expand the drive, double-click the sub element to check if an error message or error code is listed.

  2 install the updated firmware for the drive and check if it helps. Link:

• HP Deskjet 1050 J410 Printer series with windows 7 - installation problem?

  Good evening
  I just bought a new printer HP Deskjet 1050 J410 series with windows 7. I installed it... with many problems... whenever it is said that the driver could not be found... but in the end, it is installed. The scanner works fine. While the printer is blocked... When I clicked on the resolution of problems, the message I got was:
  HP Deskjet 1050 J410 series doesn't have a driver.
   
  I uninstalled and reinstalled 3 times and the same problem persists. I don't understand what that means. Should I please?
  Thank you very much for the help!

  Make sure you have the latest and correct the driver for your operating system.

  HP Deskjet 1050 All - in - One Printer series - J410

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodSeriesId=4027462&prodTypeId=18972

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• Communicator IP with VPN

  Hello

  I have the router DSL 877 and uc520 connecting to each other, and I installed outside PC on this customer VPN Cisco and Cisco ip communicator, I want to do IP communicator works with uc520, the problem is I already configure VPN on the router and it works, but I cannot ping the uc520,.

  I enclose the Visio diagram is how the connection and configuration.

  The router 877 pls delete the following:

  IP route 172.16.1.0 255.255.255.0 10.10.10.10

  Also your UC520 also have the NAT configuration to be changed:

  IP nat inside source list 1 interface FastEthernet0/0 overload

  --> ACL 1, should be changed to ACL 150 as follows:

  access-list 150 deny ip 10.1.1.0 0.0.0.255 172.16.1.0 0.0.0.255
  access-list 150 deny ip 192.168.10.0 0.0.0.255 172.16.1.0 0.0.0.255
  access-list 150 deny ip 10.1.10.0 0.0.0.3 172.16.1.0 0.0.0.255

  access-list 150 permit ip 10.1.1.0 0.0.0.255 any
  access-list 150 permit ip 192.168.10.0 0.0.0.255 any
  access-list 150 permit ip 10.1.10.0 0.0.0.3 all

  
  

  overload of IP nat inside source list 150 interface FastEthernet0/0

  no nat ip within the source list 1 interface FastEthernet0/0 overload