M200: HDD never turns down in Windows

Similar Questions

• My laptop is operating completely normally and would never shut down on its own. __But when I try to play a game or during the plauing sometime example pes 2010 or need for speed, my laptop some time Shut down.

  My laptop Qosmio F50 works completely normally and would never shut down on its own.
  But I try to play a game pes 2010 example or the need for speed, my laptop long closed.
  It was good before, but after rebotting my computer this problem just recently started...
  I have Nvidia Geforce, DirectX 10 and all recommended Requirments for the games but sometimes I start a game or after 2 or 3 housr game it would be completely Shut Down My computer and when I would turn on the computer, he would say that it was not Shut Down normally.

  Alhajji,
  They suggested to do a factory restore, if a valid step to do.  I know this isn't the most fun thing to do, but if you restore the system failing factory (clean install of the operating system).  Then, run Windows update and update drivers.  At this point, you can install a game and test.  If the problem persists, it would look to be a possible hardware problem with the system.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What to do when ipod touch volume turns down by itself

  iPod touch 5 has started to turn down the volume in itself the sep 11.

  I have already restored like new, it did not work.

  Today it didn't turn... so I decided to connect it to the PC... I opened ITunes and you press the power button and open a whole... it turned on.

  Open ITunes window saying there was a problem and it should be updated... If it did not work it needs to be restored again.

  What should I do?

  I tried to make an appointment at the Genius Bar, but so far nothing

  Thank you

  -Do you have a case on the iPod that could be turned on the switch?

  -Is what the volume switch/look stuck?

  -If you have restored the factory settings successfully / new iPod via iTunes that indicates a hardware problem. Try the Genius Bar

• Satellite M50-A-110 - wireless turns down running 8.1 Win

  I've recently bought a portable Satellite M50-A-110 with Windows 8

  It is initially connected to my router (but),
  I could load a page on the browser and the connection then turns down

  I updated to Windows 8.1, put to update the driver, chose the intel driver against the windows one, zero, the router, disabled some settings tcp/ip (web help), still nothing.

  I can only connect by cable.

  My router works fine with the other laptop, Tablet, mobile phone.
  I have a Mc McAfee Firewall, which I disabled it temporalily but the problem persists

  Can anyone help?

  Hello

  Have you noticed this disconnection using the laptop battery power or also during its connected to the power adapter mode?

  In case this happens only in battery power mode, it would be possible as the system powers OFF the WLan to save power.
  In this case, I recommend two verification options:

  1) go to Device Manager-> card WLan-> properties-> tab power management
  Check here if the option to shut down unit is not checked.

  (2) Variant 2 should be checked in the Windows power management. Here, you can set the WLan card option to the performance.

  By the way: according to the specifications of the laptop the laptop is equipped with Intel card Wireless - N 7260 WLan that supports the 802.11 b/g/n standard.

  Here is a page of the driver Intel where you can download the latest driver Intel Intel Dual Band Wireless-N 7260
  [Drivers Intel® Dual Band Wireless-N 7260 | https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+ Networking & ProductLine = Intel % C2% AE + Wi - Fi + products & ProductProduct = Intel % C2% AE + double + band + Wireless - N + 7260 & ProdId = 3716 W & LineId = 1784 & FamilyId = 1783]
  I recommend you test the 16.6.0 driver version

  If you have time, try an experiment: you can see the different WLAN channels: you must pass in the router settings as well as in properties (Advanced tab) Wlan card

• GPU on Satellite P100-217 fan never turns on running Linux Gentoo

  Hello

  I am running Linux (Gentoo) on my P100-217 (Geforce 7600). The graphic card fan never turns on, and the GPU gets to a temperature higher than 100 ° C when executing some 3d games. When I boot to windows, the graphics fan does not turn and the GPU is much cooler, running the same games.

  Can someone Toshiba please give me some information on how to solve this problem under Linux.

  Here is some additional information:
  Driver version: 1.0.9755
  nvclock version: 0.80.
  Nvclock message: you the fanspeed adjustment only is not supported on your video card type

  Thank you

  Chris

  Hello

  I'm not Toshiba, but maybe I can help you too.

  Type in the console:

  detection sensors

  and follow the instructions. Maybe you need to compile some kernel modules yourself.

• Sound seems to be decreasing after that I have used headphones, or turned down the volume.

  I have a HP G62 and he had a GOOD volume, but after that I have to use headphones or turn down the volume, he seems to do something for the volume and when I want to play sound after headphones are disabled you can hardly hear it.
  I turned the volume up on top of everything I can find, but it is so weak, it is not worth listening to!

  Hello

  1. What is the operating system installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article, and check whether the problem is resolved or not.

  No sound in Windows (Windows 7)

  Note: this also applies to Windows Vista and Windows XP

  Hope that helps.

• Wireless adapter installs - is msg not found wireless adapter and the adapter never turns on.

  HP desktop system

  Windows Vista

  Router DLink and compatible adapter for Windows 7

  Inserted the disc and MS for installing drivers appears

  Microsoft window pops up saying: these data are incorrect.

  Install the drivers updated the site Internet DLink and still wont

  SE msg not found wireless adapter and the adapter never turns on.

  Hi JRKellison,

  1. What is the model number of the router?
  2. What is the full error message that you receive?
  3. This is the first time you install it on the computer?

  Check and make sure that the adapter is properly connected to the computer.

  I suggest that you try to install the driver using compatibility mode and check if it works.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• I turned off my windows defender and when I tried to turn it on, it gave me an error message.

  I turned off my windows defender and when I tried to turn it on it gave me an error message and told me to go to help and press to activate it manually. How can I do this? The error message reads:

  «Windows Defender encountered an error: 0x800106ba.» A problem caused this program service stop.  To start the service, restart your computer or search help and Support to find out how to start a service manually. »
  I don't know how to do this and I tried different several times. It never works

  I turned off my windows defender and when I tried to turn it on it gave me an error message and told me to go to help and press to activate it manually. How can I do this? The error message reads:

  «Windows Defender encountered an error: 0x800106ba.» A problem caused this program service stop.  To start the service, restart your computer or search help and Support to find out how to start a service manually. »

  I don't know how to do this and I tried different several times. It never works

  If you do not have one of these protection programs installed antiviruss, here's a way to re - start Windows Defender...

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• Never turn off display

  my screen automatically goes on standby every 1 minute. I tried to go to control panel (change power settings).  I went t maintenanace of system in Control Panel. He always does.  Can anyone help.  I want my screen to be open 24/7.  He falls asleep all 1 minute while I watch a movie.  I have to scrible wake him mouse. can anyone help please

  Hi Ron21,

  1 when was the last time it was working fine?
  2. did you of recent changes on the computer?
  3. the problem occur only while watching a movie?
   

  Follow the steps mentioned below:

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  First, see if the problem occurs after Disabling the screen saver (by selecting the screen saver 'None'). If the problem persists, please turn off the sleep in the BIOS. To check the BIOS settings, please consult the user manual or contact the manufacturer of the motherboard.

  In addition, please set the following group policy and see if the problem can be solved.

  (1) please click Start, type group policy in the search box and press ENTER.
  Expand the following item: Computer Configuration-> administrative templates-> system-> power management-> video and display settings

  (2) double click on "turn off the display (plugged).

  (3) change the setting to "Disabled".

  4) click OK.

  (5) repeat step 4 or 5 to disable "turn off the display (on battery).

  In addition, you can test clean boot and see if the problem occurs. If the problem goes away in the boot environment, we can use a 50/50 to quickly refine approach which entry is causing the problem.

  Reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/power-options-set-power-options-to-never-turn-off/f784ed6f-A594-496a-A850-553f3e18d00c

  Reply back with the results

  Referring to the link: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/b769d9b4-300e-4066-b071-da54926112d2

• Can I use my Apple Watch to turn down the volume on my iPhone?

  Hello. I am looking to buy a Apple Watch for my wife for her birthday. She wants it only if it is supported by a very specific scenario. She wants to be able to turn down the volume on his iPhone * of * his Apple Watch. Is this supported?

  To be very clear, the scenario is the use of the watch to change the volume on the phone.  I know how to change the volume of the phone from the phone. I know how to change the volume of the watch from the phone. I know how to change the volume of the watch on the watch.

  But what I can't find info on after looking through the help/product guides, it's that it can control the volume of your iPhone remotely, using the Apple Watch.

  Any help much appreciated!

  Hello

  No, this is not possible.

• Display brightness turned down to Tecra 8100

  Hello:

  I bought a Toshiba Tecra 8100 used - after two months without problem the monitor suddenly turned down the
  brightness - in the beginning the turn-down was little, now, it's quite often.

  I tried already several things: first of all I thought it was because of the battery... but after the purchase of a new problem was still there. Sometimes after freezing
  several times by closing or simply by pressing the gel
  button, it works very well. So far, I can't find a source of
  the problem (also changed the parameters of power... is not serious)... so I'm completely at the end of my nerves - in addition to this small, but very serious problem, I'm still very pleased with this end computer.

  Hoping to find help in the forum.

  Best regards, Bjoern

  I too am in the same situation, but I just wanted to clarify the problem. The machine starts very well, but sometimes the backlight fails completely. It's pretty sporadic, although invariably reboot fixes the problem (temporarily). Is it a software or a hardware problem?

  Thank you, David

• I can't turn off my Windows Firewall?

  I can't activate the WF out im stuck at the control panel > system and security > firewall anmd so I can't click on anything :(?

  Hello

  ·         Why are you trying to turn off the Windows Firewall?

  ·         What happens when you try to click on firewall?

  ·         You receive an error message?

  ·         Have you made changes on the computer before this problem?

  ·         What operating system is installed on the computer?

  Step 1:

  I suggest you to see the steps in the below mentioned links and check if this may help.

  If you use Windows XP, see the link below and check if it helps.

  http://support.Microsoft.com/kb/283673

  If you are using Windows Vista, check out the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  If you use Windows 7, see the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Step 2:

  I suggest you to check the status of clean boot and see if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 and Windows XP

  See the articles below:

  http://support.Microsoft.com/kb/929135

  http://support.Microsoft.com/kb/310353

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• my 4 TB HDD not no projection in WINDOWS Xp

  my 4 TB HDD not no projection in WINDOWS Xp

  GTP Protictive partation list

  Windows XP only supports up to HD 2 to.  (actually the MBR only supports 2 TB regardless of the OS).

• Never managed to get Windows Search to work in XP Service Pack 3, but the Research Assistant works very well.

  Original title: Windows Search

  I've never managed to get Windows Search to work in XP Service Pack 3, but the Search Wizard works fine.  I tried to index the C: drive.  I clicked on 'Rebuild' under Indexiing Options.  The c: drive shows in Indexing Options, excluding some unnecessary subdirectories.  It's all buzzing around for awhile and then says "0 indexed items" and "complete indexing.   I use Norton Internet Security.  What I am doing wrong?

  Hi Victorvan,

  You can uninstall the Search Assistant and check if it helps.

  Check out the following link to uninstall the program:

  How to change or remove a program in Windows XP

• Turn down the volume on the tone and ringing for HP Laserjet Pro M1536dnf

  We recently bought a Laserjet Pro M1536dnf.  I went through all the menus as well as the user's guide.  How do you turn down the volume for outbound faxes?  The tone and the call for ringtone is too loud and disturbing for the workers in the room where the fax.

  Hey Candlmc,

  If you press the key on the front panel of the M1536dnf, then you will be presented with the configuration menu.  Highlight the menu of system configuration and select it.  Scroll down the menu for the Volume settings and select it.

  This is the section that will allow you to change the ring volume and the volume of the phone line.

  Hope this helps,

  Jason