Similar Questions

• How can I fix this error msg? your default printer must support a minimum resolution of 300 x 300 to use the shape tool. I am trying to save in PDF format.

  How can I fix this error msg? your default printer must support a minimum resolution of 300 x 300 to use the shape tool. I am trying to save in PDF format.

  When you have what you want to save the selected PDF file, make sure that you press properties, and set the resolution in the settings.  PDF files themselves have quality settings, (print quality, Web quality etc) then make sure that you have the right to a game if you plan to use the "print" function to save in PDF format.

• How to test the stability of the communication and to calculate ber using the CVI?

  Our Chief Engineer gave me a task yesterday. He asked me to make testing of software and to calculate the error rate binary we would like to know our stability of communication.

  However, I never touched this aspect of knowledge. I know a bit about the CVI and I want to write code with CVI bit error rate. So I could test the stability of the communication.

  But I don't know how to analyze and judge the receivers codes, whether they are good or bad.

  We use the Modbus communication protocol and receive data via a port series, so I want to back up all the data and record the total number of datas, marking as M.

  then, save the eligible data and save the number marking as N. Thus, the error rate is binary/m (M - N).

  If it's doable? Or you have a good idea. Thank you very much.

  unsigned char in_data[100]; 
  
   inqlen = GetInQLen (comport);
   for(i=0;i
  Above is my code that receives all the data I want to save the data [] array in_data and save the number.
  switch(inqlen)
  {
   case 19:
   {
     crc=usMBCRC16(in_data,inqlen );
     if((in_data[1] == 0x03)&&(crc==0)&&(in_data[0]==device_addr))
      {
  
      }
   }
  
  Above is the judgment of condition who receive eligible data which mark as N number.
  I know there is a prerequisite that I filter all the bad data. However, I don't know any good idea. I'd appreciate if someone could help me.
  Thank you very much.
  Best regards.
  xiepei
  			 
  		   

• How to use the Windows character map with the Arc keyboard?

  When I "Select" and "Copy to Clipboard" character as a checkbox and then enter any rich text field, it is for some unknown reason, out with the bad temper, that I did not choose. I don't think it's related to the Arc keyboard fault, since I do it only with my mouse ArcTouch.

  My "copy to clipboard" feature has always worked well in the past until I installed this Arc keyboard and the copy function continues to operate properly with anything but Windows XP Pro SP3 32 Character Map.

  So I want to try to enter a character by typing the standard code for the character... but the Arc keyboard doesn't have a "Numlock", because it does not have a dedicated digital keyboard and by the statement, you cannot use the number keys "at the top".

  "Product Guide" for the Arc keyboard is not very useful except on how to plug it in 28 languages.

  Is there a work around these two examples?

  Thank you.

  Someone told me that you can not add whatever it is wiped from the map of characters in a field of type text such as Notepad, that she must be rich text applicable as Wordpad. Not true..., I guess?
  Oh well, it's here where I got to go to... [Is it safe? [I'm going to cross that off my list].

  I forgot to say in the last post, & slipped a character of the fonts map does not either, on most of the trials if he drag & drop is of course the bad character and it is not just "Wingdings", but several I tried.

  When you say "characters in some fonts like"Wingdings"and"Symbol"will not display properly if changed to a different font - even if the code is correct."

  Can you help me understand what that means or how that could happen or what I can do to change the font?

  When I choose a check mark in the Wingdings font and then enter it here, it's: [u]. I don't know I wasn't looking to change police in Wingdings to something else between selecting and placing it here.

• Inter communication VM in two ESXi using the same VLAN ID

  Hello

  I am creating a lab in my server ESXi (192.168.1.10). The default VLAN (VMNetwork) connected to ESXi is VLAN 1. If the virtual machines with 192.168.1.xx IP. able to communicate to the external network.

  But I created a new 25 VLAN in my ESXi and added two virtual machines in that ESXi. Communication between these two VMs is perfect.

  My question is, what should I do if I need these 2 VMs to connect a computer virtual hosted in an another ESXi with 25 VLAN?

  Thank you

  Nithin

  Well lets go back to the original question:

  But I created a new 25 VLAN in my ESXi and added two virtual machines in that ESXi. Communication between these two VMs is perfect.

  My question is, what should I do if I need these 2 VMs to connect a computer virtual hosted in an another ESXi with 25 VLAN?

  If you don't want your VM in 25 a VLAN on a HOST to speak to other virtual machines in the VLAN 25 to HOST B, you will need to configure it as the attached picture:

  

  Your psyhical switch should the Tag VLAN on ports so that he knows how to route traffic.  Now I guess that your fault WHAT VLAN on all your switches is 1 as it is pretty standard.  VLAN 1 is also past reguardless so you will probably just tag with 25 ports VLAN.  Once the ports are all stamped this VLAN, they will be able to talk with success.  Now what happens, it's your 2 VMS in the vSwitch can talk because they are both on the same vSwitch with VLAN Tag on it, however, when you try to talk to another virtual machine to another host the package arrives at your psyhical pass and does not see a label on this port if it falls.  The only ports that you need to add this tag VLANS are the your NIC psyhical on the host with that vSS is connected.

  I hope that this has helped or made things clearer

• Gets the current Community ALUI name by using the public statement CDIP/IDK?

  I accidentally posted this in the wrong forum, so you can see this question duplicated in the forum WebCenter and Web 2.0 technology.
  
  ------------------------------------
  
  Hello
  
  I'm trying to find a way to get the name of the community for the community that you are currently using the EDK/IDK? I know that there is a custom tag that you can use (< pt:realmName xmlns:pt = "http://www.plumtree.com/xmlschemas/ptui/" / >), but I need to store them in a Java variable rather than the result of an evaluation of the custom tag. Any ideas or solutions would be greatly appreciated!
  
  Thank you

  The PRC to do a search for the ID of the community get its name. It uses the API server if you need to cache the result.

  IPortletContext.GetRemotePortalSession)
  IRemoteSession.GetCommunityManager)
  ICommunitymanager.QuerySingleObject (id)
  IObject.getName)

  I don't know if there is a way to get the portal to send you this information automatically.

• Apple TV 9.2 using the keyboard to type the first few letters in library home sharing

  Hello community,

  Someone managed to use the keyboard to type the first letters of a movie/tv/music show in their home sharing library?

  I was able to do this on the old ATV but can't make it work on the new ATV.

  To explain more in detail - the reason why I want to do it is to spend in that capacity that I'm looking rather than slowly scroll down the list of titles. It is a useful time saver.

• convert elements using the DAQCard-6024E card to USB-6221using LabVIEW 2009

  I just got an old project, the VI has been primarily designed using the DAQCard-6024E map. Since we would be upgrading the equipment and the DAQCard-6024E serves not long. However, they want to keep the similar façade. I am trying to convert the drop-down menu that I can use with USB-6221 with Windows 7, but I don't know how. Can anyone help?

  Windows 7, NI USB-6221, LabVIEW 2009 sp1

  Hi smoothenigne007,

  After watching your upgrade.  All your writing VI should use the same task.  There is no need to close this task until the end of the program.  In addition, you can remove all the time because they do not allow the task close a loop.  I did a performance highlighted with your code and you can see that the first task was not allowed at the time wherever the data reached the second task.  When you try to create the second task, the error is generated.  Because you do not give me multiple writes to the same port there is no need to open and close the task each time.  Here is a link that will explain a little more about the DAQmx driver works.

  Getting Started With DAQ

  Kind regards

• Connector using Siebel-OPA BO mapping for the large amount of data

  Hello
  
  We intend to use the approach to mapping of BO to pass several values of OPA to Siebel, which we intend to store in the form of several records in Siebel.
  1. it is recommended to do by using BO mapping?
  2. mapping IO would be preferable, given the size of the data concerned?
  
  Thank you

  nilskil wrote:
  Hello

  We intend to use the approach to mapping of BO to pass several values of OPA to Siebel, which we intend to store in the form of several records in Siebel.
  1. it is recommended to do by using BO mapping?
  2. mapping IO would be preferable, given the size of the data concerned?

  Thank you

  For the passage of a lot of data between OPA and Siebel, I highly recommend using a map of IO. You can find more quickly and also, return xml IO will be easier to deal with.

  See you soon
  Frank

• Name of the attribute using the OMB connected

  Hi all
  
  I'm writing the OMB command to get the name of the attribute that is connected to the input expression operator group attribute.
  
  Scenario: -.
  There are connection from attribute 'ABC' of the group 'OUTGRP1' of the output operator Carpenter 'JNR_SRC_ALL' attribute 'ABC' of entrance group "INGRP1" of expression operator "EXP_SRC".
  
  I'm writing the OMB command to get me an attribute name connected to the input expression operator group attribute.
  
  I am able to do Carpenter name (JNR_SRC_ALL) of the operator using the following
  
  OMBRETRIEVE MAPPING 'TEST' GET OPERATORS CONNECTED TO THE ATTRIBUTE 'ABC' OF THE GROUP 'INGRP1' OPERATOR 'EXP_SRC '.
  
  How can I get the connected attribute name? I know that I'm looking to go back.
  
  One way that I figured out was to get the operator name of Carpenter and then loop through each attribute of the joiner and check if a link exists between the attribute of Carpenter and expression using the following command
  
  OMBRETRIEVE MAPPING 'TEST' HAS ATTRIBUTE LINK 'ABC' OF THE GROUP 'OUTGRP1' OPERATOR 'JNR_SRC_ALL' ASSIGN 'ABC' OF THE GROUP 'INGRP1' OPERATOR 'EXP_SRC '.
  
  Returns - 1 (true)
  -0 (false)
  
  I thought y at - it another way to do this more effectively. Any help would be appreciated.
  
  Thank you
  Sam.

  In my opinion, using OMB, we can get the attribute name without looping through all the attributes of the logged in user.

  Sam, you're wrong. It seems that you did not read my last post of the thread.
  You can use this command
  OMBRETRIEVE MAPPING 'MAP_NAME' OPERATOR 'TST' GROUP 'INOUTGRP1' GET THE ATTRIBUTES CONNECTED TO ATTRIBUTE "NEW_ID' OF THE GROUP 'OUTGRP1' OPERATOR 'CONSTANT '.

  Kind regards
  Oleg

• with the google world map, are unable to send my emails

  When I use the google world map, I need to send photos by e-mail.  He worked for a little while then began receiving these errors and mails are not sent more

  Hello

  1. what error messages/codes are you getting?

  2. how you try to send email from the Google world map?

  3. are you using Internet Explorer, open Google Maps?

  I suggest you to ask your question in support of Google Maps. |
  http://support.Google.com/maps/bin/request.py

   
  Problems with Internet Explorer
  http://support.Google.com/maps/bin/answer.py?hl=en&answer=21849&topic=1687362&ctx=topic    

  Reference:

  Sharing
  http://support.Google.com/maps/bin/answer.py?hl=en&answer=144361

  Report a problem
  http://support.Google.com/maps/bin/answer.py?hl=en&answer=162873

  Thank you

• I use Photoshop CC and I have problems to use the scanning feature PLC culture and the strraigten.  Other printing features work within the progrram, but no connection when I use don't automate.

  Am I missing a configuration of PLC to allow me to crop and scan several photos?

  With the help of 8.1 with canon MX340 wireless and final version of Photoshop CC.

  Help.

  [email protected]

  VIC

  I plugged a usb cable and I was able to use the WIA import feature and

  the menu of the controller,

  He gave me the opportunity to select the printer and scan using the automaton

  function.

  When I removed the cable, it would not recognize the printer scanner in the

  Wireless mode.

  I tried to restart the system, no luck.

  In fact, when the cable is removed, the function to automate is

  "grayed out" which would explain why it cannot find the scanner.

  Any ideas?

  VIC Ouellette

  K1CGI... QRZ?

  In a message dated 12/09/2015 11:41:18 eastern standard time,

  [email protected] wrote:

  You talked

  by [email protected]

  (https://forums.adobe.com/people/[email protected]?et=notification.mention//forums.adobe.com/people/ [email protected]? and = notification.mention) in Re: I use Photoshop CC and I

  problems to use the scanning feature strraigten and the cultures of the automaton. Another impression

  features work within the progrram, but no connection when I use don't automate.

  in Adobe Community - view [email protected]of reference for you

  (https://forums.adobe.com/message/8274458?et=notification.mention#8274458)

• Pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  It's a delicate issue... like some patches cannot stipulate pitchbend...

  But to quickly test your pitchbend wheel actually works properly...

  Download the free lunch monitor...

  Snoize: MIDI Monitor

  Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.

• UDP COMMUNICATION FROM ONE SYSTEM TO ANOTHER BY USING THE TYPE CAST

  Dear reader,

  I tried a simple communication udp from one system to the other. I have conditions of that does not change the receiver vi It is set. I'm attaching my vi sending and receiving the part. Please go through it and give me suggestion on how to code the part shipment without changing the receiving party and successffully communicating by udp.

  I am just a starter in LabVIEW.I believe your suggestions of ideas will be very useful to move forward.

  Concerning

  Srinath, R

  One thing you should know is that cast a DBL (or table DBL) requires eight bytes (or an integer multiple of 8).

  The sender must send 8 bytes, which is easier to do by remodeling (padding) of the Boolean array with 8 element (using the table to reshape) prior to cast to a string.

  Here is the code that works. You can easily implement it your original code.

  

• QuickSet C20 (software: TC5.0.0.273156) in 8.6.2.20000 - 2 Communications Manager using the SIP protocol.

  All,

  I am trying to record a QuickSet C20 with the following scenario:

  Endpoint registration C20 (software: TC5.0.0.273156) in 8.6.2.20000 - 2 Communications Manager using the SIP protocol.

  My URI format is: [email protected] / * / (the IP address of the CUCM)

  I tried different settings in CUCM and QuickSet C20, but without success.

  Status in CUCM:

  Inscription: unknown
  IP address: unknown

  Status in C20 QuickSet:

  Failure / failed to save. Unprotected. Unverified.

  Note: The C20 QuickSet Gets the correct IP address.

  Can someone help me?

  Waiting,.

  Lucian Medeiros

  I would try to use the version of the following software:

  cmterm - s52000tc5_1_0_280662.cop.sgn

  Downloadable at:

  http://www.Cisco.com/Cisco/software/release.html?&mdfid=283613658&CATID=280789323&softwareid=280886992&release=TC5.1.0-CUCM&rellifecycle=&relind=available&RelType=all

  Not to mention that I would look at:

  http://www.Cisco.com/en/us/products/ps11424/prod_maintenance_guides_list.html

  In particular:

     http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC5/administration_guide/cts_endpoint_administration_ucm86_quick_start_guide_tc51.PDF