Name of the attribute using the OMB connected

Similar Questions

• Sharing of readers do not reconnect - error "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  Original title: Shared readers do not reconnect

  I have two PCs connected wireless. A laptop (Vista Business) was the drives mapped to actions on the other PC (XP). Whenever the Vista PC is started or out of hibernation, or after only a short period of time these discs are not available. Click on the drive in Explorer to display the message "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  If I click on 'Network' within Solution Explorer, the XP PC is not visible. The only way that I can "reconnect" these disks is to go into my anti-virus (Trend) and open the network map. This shows the XP PC and then the shares are available through Explorer - XP PC is still not visible by clicking network however.

  It started only happens in the last two months - cannot locate exactly when, but quite recently. I use connections to store small files and backup critical files a few before nailing the laptop away and it is quite annoying to have to go through this routine every time.

  Any ideas?

  Just in case it helps others - I found that if I make sure that my XP PC has a fixed IP address, and then set up the shares so that they are defined using the IP address and not share names, then I do have more problems - seems like it's something to do with Windows solve the share names rather than something to do with the personal firewall after all.

• Name of the data connection with ConsoleDeviceName and CanonicalName store

  Hi people,

  I would like to connect 3 parameters, ConsoleDeviceName, CanonicalName, and 'name of the data store.

  The first two times (ConsoleDeviceName, CanonicalName) can I get with ' Get-VMHost "MyESXHost |" Get-ScsiLun.

  But how can I get the name of the data store?

  Thanks for help

  Hello

  In order to get the name of the data store for each unit number logical you should review the information of measurement of the disk for each data store attached to the host and link them using canonical names of lun. VMFS datastore disk measurement information are available in the HostScsiDiskPartition object. Here's a code example how to do this:

  $h = Get-VMhost "MyESXHost"
  
  # collect VMFS datastore name and extent cannonical names into a hashtable
  $dsLunList = @{}
  $dsView = $h | Get-Datastore | ? {$_.Type -eq "VMFS"} | Get-View
  foreach ($ds in $dsView) {
       foreach ($diskExtent in $ds.Info.Vmfs.Extent) {
            $dsLunList[http://$diskExtent.DiskName|http://$diskExtent.DiskName] = $ds.Info.Name
       }
  } 
  
  #populate datastore name for each lun if available
  $lunList = @()
  $h | Get-ScsiLun | % {
       $lun = "" | select ConsoleDeviceName, CanonicalName, DatastoreName
       $lun.ConsoleDeviceName = $_.ConsoleDeviceName
       $lun.CanonicalName = $_.CanonicalName
  
       if ($dsLunList.ContainsKey($_.CanonicalName)) {
            $lun.DatastoreName = $dsLunList[http://$_.CanonicalName|http://$_.CanonicalName]
       }
  
       $lunList += $lun
  }
  
  $lunList
  

  Kind regards

  Yasen

• name of the network connection

  Hello

  Is it possible to get the name of the icon of network connection (see attached photo) through program based on the ip address?

  Pls know me if there is a way.

  Thank you.

  Here is a more complete VI to get all cards named, and the ip addresses assigned to each...

• Names of the devices connected to the router

  How can I tell the names of the devices that are connected to my router E2000? Cisco connect says I have 4 devices but I only have 3. I'm trying to understand source of the 4 device.

  Open the Cisco connect software. Go to "Setting up the router" and click "Advanced settings". Who will open the router configuration page.

  Click the status tab. Go to the tab "Local network" sub on the button "DHCP Client table". Here is a list of the devices connected to the network.

• Script for the registration name of the user connected to PC Windows7?

  Is there a script to add the name of the user logged in Windows7 PC in a textField?

  Hello

  This will require a script folder level, some JS which must be copied on the machine for everyone who uses your form.  There are more details here Re: retrieve current user info

  Concerning

  Bruce

• Name of the wireless connection

  I reset my router to the default settings, and I noticed that my network name changed "DS912" to "DS912 2" How do I remove the number at the end of the name of my network? It always seems to happen whenever I have reset my router and the name of the network follows the number sequence whenever I have reset my router or I reinstall or install a new OS.

  I'm not aware of any approved method (or other) in order to avoid the consecutive numbering of the networks and I really don't see why it should be a problem. If I was forced to deal with it, then I create a restore point, and then delete all unwanted network names registry and duck for cover. Maybe it will work, maybe it won't, maybe he will have unexpected side effects.

• Can I change the names of the devices connected by Bluetooth to make them more recognizable?

  I have a number of devices that can be connected by Bluetooth, for example, speakers, keyboards, etc. It is often difficult to remember the descriptive name that many of them are similar, for example "keyboard Bluetooth."

  These names can be changed so that they are easily recognizable, for example of a number/letter combination to tell LG amplifier?

  Right click on the device in the Bluetooth system preferences and select Rename.

• How to derive the user name in the bean connection in a Fusion ADF Web Application

  Hello

  I want to derive the username in the session Bean opening after successful authentication.

  I think writing a method in AM and use a VO for the user based on the user name ID.

  Could you please let me know is the best approach and if yes what is the steps to achieve this in Jdev 12.1.3. How to access the AM method in the LoginBean?

  Or create a viewCriteria in the VO and call it the Login bean?

  See you soon

  AJ

  How to access the AM method in the LoginBean?

  You must expose the method using the client interface of AM and go through links

  as the operation binding

  Oracle ADF - tips and Techniques: model ADF - Beginner: AMImpl expose methods like client interface

• Rename the name of the connection Wireless in Windows 8

  In Windows 7, it was possible to change the name of the wireless connection to something meaningful (what a concept). For example my home wireless with ssid xxxxxxxx be named home wireless. When I connected to the Office Wireless (with a ssid of yyyyyyyy) he would be named Office Wireless.

  This seems to be is no longer possible in Windows 8. Microsoft is way too much fun playing silly blighters. They have really taken to a whole new level with this OS.

  After much research I found how to rename a wired connection, but not wireless. For the life of me I can't figure out how to do this.

  I'm * NOT * request your opinion on whether I should do this. I ask * HOW * to do this. (Futile attempt to ward off the unnecessary and inevitable "you shouldn't do" or answers "I don't see why you would want to...) »)

  Maybe what you are looking for requires you to access the registry to make the name change.

  HKLM\Software\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles

  Browse the list of profiles to find the one that you need, and then change the value of string ProfileName.

  You can also do this when you change wireless cards and to reconnect to the same network and the connection then presents itself as 'name 2 Wireless' or ' wireless 3 "instead of just"wireless name' name, you can delete old profiles of the same name, and then rename the current without the number on the end. "

  After changes simply refresh your list of network connections to view the changes.

  As always, changes in the register are not advised, so with caution, take a backup before you change etc etc.

• Can not share the internet connection through Wifi

  Hi all

  I am connected to the internet using an external antenna connected via USB to my mac (WIRELESS n 801.11). I want to share this connection since my mac with other devices, i.e. my iPhone. I use the internet connection through system preferences--> sharing--> sharing internet--> connection on the part of wlan to computers via WIFI and give a name and a password for the wifi settings. When I start the connection icon wifi on the the high watch the arrow menu to the top, but it gives an IP address from 169 auto... etc etc and I can't any traffic to my iPhone.

  I tried to configure IPv4 to use DHCP with a manual (instead of automatic DHCP) address and IP I enter the IP address used in the WiFi, wifi says that it is connected to the name of the internet connection in the shared connection, I opened but once again no traffic to the iPhone. Also tried disabling the firewall, once again nothing.

  I run El Capitan 10.11.2.

  Clues?

  OS X El Capitan: share your Internet connection

• display the text in the navigation bar when the user connects

  Hi all

  I'm (still ) on Apex 4.2.6.

  Currently, I have in my page templates, the following code snippet:

        <div class="logoBar">
            <img src="#IMAGE_PREFIX#themes/theme_125/images/logo_.png" />
            <h1><a href="#HOME_LINK#" id="uLogo">#LOGO#</a></h1>
          <div class="userBlock">
            <span>Username: &APP_USER.</span>
            #NAVIGATION_BAR#
          </div>
        </div>
  

  I have an obligation to display the user name (APP_USER) and of the company the user works for point Application AI_COMPANY, only when the user is connected. When the user is not connected; instead of these elements, I must show a connection link. Well, I know how to display a link to the login page, only when the user is not authenticated, using the navigation bar. Currently, when a user is not authenticated; the page shows: username: person. It's because he's in my page template. How can I show only the user name when the user connects? And then only display the name of the company?

  My first thought was to add an item in the navigation bar. But these elements comes in the form of links. Is it possible to add a navigation bar element and let it display as text? Of course, I could write a dynamic action on page 0 to remove the link, but I'm looking for a nicer sollution or better.

  I have apreciate your help!

  I take it, you use the same model of your home page and login page.

  You could use 2 different models or get out your elements in your model and put them in page 0.

  You can then make them conditional based on the number of page

  Gus

• How to get a user logged in (NAME of the END USER) in the APEX?

  Hi all
  
  I have Apex 3.1.2 Oracle 10 g 2.
  
  I have an integrated application, I need to print a REPORT based on the user who runs the application. While building the app, I used Application Express - authentication schemes and created an END USER.
  
  But, when the report is run, I get the error. This is because it takes the ANONYMOUS user name. How to get the user_name of the logged-on user?
  
  Thanks in advance.
  
  Guru
  
  Published by: guru Perrin on October 14, 2008 16:25
  Modified subject line

  Hi guru,.

  You can use the & APP_USER. application for this variable. He was replaced when executing, in the name of the user connected.

  Edit: PS
  Don't forget the point. in the end ;)

  Hope this helps,
  Greetings,
  Rutger

  Published by: Rutger_de_Ruiter on October 14, 2008 03:57

• vSphere client using the name Netbios on ESXi host does not connect using the credentials of a Windows session

  I have 3 ESXi 5.5 hosts, all connected to a single server vCenter, where we try to authenticate directly to the host by using the windows logon credentials. I have installation of the Administrators group of ESX and filled with the admin accounts that I want to be able to authenticate to the host. The Netbios name of the domain is tstdomain (for example) where the domain name is tstdomain.com. If I connect directly to a host and check the checkbox 'Use Windows Session Credentials', the vSphere client will default by using the Netbios name of tstdomain\adminusername and the connection will fail indicating that the username and/or password is incorrect. If I enter the domain name of tstdomain.com\adminusername, I am able to connect to the host without error.

  Does anyone know how get past that this matter have the vSphere client uses the domain name or to use the Netbios name and connect with the credentials to active directory? I looked by editing the file/etc/hosts and checked that the SPN of the host is correct in active directory with the command hostname setspn - l, with no luck on one. I also tried to change the field of research for the Netbios name of tstdomain rather than the tstdomain.com domain name, also did not work.

  Thanks in advance for your suggestions on how to correct the problem.

  Seems that this issue was due to a slow network and the connection timeout when you try to talk to the domain controller. I am able to connect with windows creds now, but the connection is very slow. I increased the default period of 30 to 60 seconds to help work around the problem.

• Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  Hello I am trying to download an episode of my Podcast podcast connect and get this error?

  Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  my diet is validated? http://beprovidedhealthradio.libsyn.com/RSS

  It worked for my first episode? I don't know why it doesn't work for the second episode. I also use Libsyn if that helps.

  Your show is already in iTunes.

  https://iTunes.Apple.com/podcast/id1151562400?MT=2 & ls = 1

  And everything seems fine with it and your diet.  You ONLY SUBMIT YOUR FEED ONCE.

  That's it - better to stay outside of your podcast connect account - only bad things happen to go there and play with things.  Once again, your show is very well and is in iTunes and your flow is good with it.

  Both episodes show when you subscribe - and your most recent episode appears on the page of the iTunes, general store with in 24 hours from when you posted it.

  Rob W

  https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2 https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2