Como me could help not me as the compra del programa photoshop

Similar Questions

• File is not compatible with the current version of Photoshop

  "The file is not compatible with the current version of Photoshop" is the warning I get when you try to open a Photoshop file that I saved a few minutes before my computer crashed (Wacom Cintiq complementary, 10 of Windows). I can't open it with any another application either. How is it possible that I can not open a file I just worked with and saved permanently? Is it possible to recover an earlier version of the file?

  Hi NonMeek,

  It seems that the file has been corrupted somehow.

  Would suggest you to run Photoshop as administrator and then try to open that specific file.

  If this does not help, you can download this file somewhere and share the download link so that we can try to open it on our end.

• Photoshop CC 2015 (Norwegian version) will not start. The following message: Adobe Photoshop CC has stopped working.  A problem caused the program stopped fungeresom correctly. The program will be closed and you will be notified if a solution is av

  Photoshop CC 2015 (Norwegian version) will not start. The following message: Adobe Photoshop CC has stopped working.  A problem caused the program stopped fungeresom correctly. The program will be closed and you will be notified if a solution is available.

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

• downloaded Inbox, big mistake. -I want to go to Inbox, but it does not appear in the list of programs

  I want to really go to Inbox, but it does not appear in the list of programs, so how do I get rid of him, for free please if possible?

  Hello

  Try the free version of revouninstaller to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

• I would like to know if someone could help me to download the Flash player

  I need someone to help me to download, because it does not give me the download button

  Thanks, it was a problem with my modem, not the adobe program. It has been fixed, but thanks again!

  Carla O. Martinez R.

  Translator

  [email protected]

• Just upgraded to Yosemite 10.10.3 including Photos 1.0 that is not synchronized with the Publisher of Adobe Photoshop elements (already installed) 12... any ideas?  With the help of MacBook Pro (13-inch mid 2012)

  Just upgraded my MacBook Pro (13-inch Mid 2012) to Yosemite 10.10.3 including Photos 1.0 that is not synchronized with the Publisher Adobe Photoshop elements 12 (already installed and prev ok with iPhoto)... the ideas please?

  You are right 99jon... with open Photoshop, you click on 'Open' and 'Finder' opens in the window with 'Photos' listed. It's all a bit messy, but seems to work. Thanks again for your help. Bi

• media center is not AutoSave at the request of programs

  What time for media center of regular program does nothing. need to start manually.

  Hi Webber,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, it seems that you are having problems with the recording in Windows Media Center.

  Your show might not have been recorded for various reasons. To check the history of recording to find out why the show could not have been saved, follow these steps:

  a: On the start screen, go to TV + movies , clickrecorded tv , click the view in the application and then click on story.

  b: To organize the list, click sort by Date sort by status and sort by title .

  c: Use the arrows on the screen to scroll through the list. The status for each show is listed next to the title of the following: Recorded, not recorded, Deleted, canceled, Preempted, partial or bad Tuner.

  d: For a more detailed explanation on the State of recording the show, click on the title of the show.

  Here are the reasons why a show can't save:

  • There was a conflict with another record with a higher priority. You can see more information about priorities earlier in this topic.

  • A tuner was not available when the show had to register.

  • There is no available disk space and no records could be removed to create more space to record. To learn how to delete records, see management of recorded TV shows: frequently asked questions .

  • There are no offers updated Guide for scheduled recording. Make sure that the latest Guide data is downloaded Windows Media Center. For more information, see troubleshooting problems Guide download .

  • Restrictions that were set by the broadcaster or the creator of prohibited content the show being recorded.

  • The show was previously saved. Windows Media Center does not record a show of a series if she has already recorded or deleted in the last eight weeks.

  • You have reached the limit of how many records are kept for a series. Remove the other records for the series or increase the limit of records how can be kept for a series. To learn how to manage your recordings, seemanagement of recorded TV shows: frequently asked questions .

  • The TV station changed the hourly number or channel for a specific network or the show didn't air.

  • There was no TV signal because the channel was not available, the TV signal has been disconnected or the tuner has been disabled.

  • Your computer is turned off or lost power during the time that the show was scheduled to record. Your computer must be on or standby mode, hibernation or Away to record a program successfully.

  • If you have a set - top box, the infrared (IR) cable may have been disconnected, including preventedWindows Media Center from changing the channel to start the recording.

  For more information, access the link which is mainly used for Windows Vista but that applies both to Windows 7 below.

  A problem of recording TV on your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-recording-TV-on-your-computer

  Answer to us if you are having problems with Windows Media Center or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Systematically, does not open, gives the error: "C:\Program Files (x86)\Mozilla\firefox.exe Windows cannot access the specified device, path or file.» You can not

  Installed FF 16, 17, 18. Does not open in the normal administrator account, or with "Run as Administrator" but will be in SafeMode to W7. Changed the permissions (normal connection had to do in Mode without failure of W7, would not allow (connected as an administrator) can not delete the files from Mozilla in normal connection.) On rare occasions, with a fresh install, I could get it to open once, then not again. Searched the reg any mention of Mozilla or FF and cleaned. Tried FF safe mode, no luck. Check permissions after appropriators and multiplication of the rights of full ownership of all the files of FF, several reboots, no luck. Chrome, IE and SeaMonkey work very well. Using a fairly new installation of W7 Professional 64 bit on a Dell Optiplex 990 i7, 16 GB of ram. Had the same problem with another user on the same box. No problem on other computers without other problems in program.

  Finally have it running. Seems that the enterprise version of McAfee is blocking the installation of the program. McAfee uninstalled, reinstalled Firefox, installed McAfee and now, it's good to go.

• HP Pavilion g7 1178 AC: windows jingle/tune does not sound and the start up programs do not start before the RESET

  When I start my computer, I have the lock screen, enter my PIN and then nothing really happens, I get all the blank screens or error messages just my old image of the windows desktop 7, then I RESTART my pc and then I get Windows Small Volkov song/jingle/air once it starts again , then my lock screen and then my start up programs start at work, bitdefender, toolwiz and things are working properly.  I removed my old windows, clean up the files using the disk.

  I do not understand why the windows little tune does not make its sound until I restart?  Does this mean that windows is does not start properly until I restart?  And would that be why my bitdefender is does not properly start as well. ?

  I checked in the Task Manager after the first start-up, he said that the two programs have been activated, but they do not work properly.  I checked bitdefender and it also says that it is on the startup list, but why he doesn't have the things I have planned to start rebooting?

  It is very frustrating having to start my pc, wait a while, then do a reboot to get things every morning.  Suggestions, ideas, help would be greatly appreciated.

  Thank you for your time, sincerely, Niki

  I too was wondering why * nothing * played, even when I had checked the box "Play Windows startup sound" in the advanced sound settings > Sound > sounds section. After a LOT of research (that brought me here, among others) here are the "definitive"...
  
  "By Raymond Wong2015-07-31 13:30:22 UTC.

• executable file does not appear in the list of programs

  After installation of my executable it does not appear in the list of all Windows programs. I've built a lot of executable and installers before but this is the first time I see this. The folder is created in the Program Files (x 86) directory and the program performed well when I double-click on the .exe.

  This sw was initially developed with LV10 with WinXP then moved to LV2012 with Win7 64 bit and then to LV2013 and it uses a plugin architecture (I'm still not very familiar with this).

  I also have these following questions:

  1. I don't remember so many folder created after building an exe file (see photo "filelist.png") before moving this application to LV2013, why all these dataX folders are created? (associated with the plugins?). Except for the data folder containing my ini and xml configuration files these folders all contain a single mnu file.

  2 - Why are there some records of pilot instrument included in the compilation? (Agilent, Keithley and Tek) I'm also using other equipment, and they do not appear in the construction. These problems with the build because of their tree VI live I had to either check turn debugging on or off the use of the diagram structure on these screws diagram which is certainly not the right way to do it.

  3. probably the most important, what would be a document of reference on how to create an executable and a Setup program for an application architecture plugin.

  Thank you

  Ben64

  You use LVOOP you use the NI Report Generation Toolkit, which is implemented using OBJECT oriented programming. Already this explains some of the additional folders that you see.

  Other components are of course part of lvlibp (packed project library) and where it will not integrate the EXE itself. Also their dependencies... which may explain support directories (data1, data2,...).

  Referring to other settings, the log file does not help much. So we can not tell you why the installation program does not create a program shortcut in "start > programs". If you check the "shortcuts", you should be able to see if there is a routine in the Setup to create such a link or not. If the parameter is there, but the installation fails to create, it can be connected to the user rights that you use to run the installer...

  Norbert

• Error: Windows is not registered in the new Dell Intel desktop computer.

  Original title: old hard drive with XP Home Edition works is not on the new Dell Intel desktop computer.

  I had Windows XP Home on my Compaq Presario running athlon 64 bought 5 years ago. The motherboard died and I bought a new Dell Inspiron 620 2nd Gen Intell i3 running. So I removed my old hard drive Compaq and added to this new Dell. Boot from the Windows XP disk comes up saying "Windows is not. What to do, I have a lot of important files and programs on the hard disk of XP?

  Hi Keita,

  You can follow the links and check if the problem persists:

  Activation and registration of a Microsoft product

  Understanding activation and registration

  Hope the helps of information.

• Removing an unwanted program that displays on the C drive but NOT appear on the uninstall feature programs

  I need to remove gamevance from my computer and it shows on the C drive, but does not appear on the functionality of uninstalling the programs so I can't uninstall it. McAfee can not uninstall and says I need to manually add or remove programs. But since it does not appear there I can't uninstall it. Any ideas on how to uninstall it because it shows on the C drive, but does not appear on uninstall/remove programs functionality?

  Yes did not work because it would not actually be disappeared from my computer but by messing around after that you suggested, I found another person here who was sort of a similar problem and microsoft team recommends that they download a revouninstaller. If after that it still didn t in the revouninstaller but it allowed me to do a right click on the files and uninstalling this way.

  Thank you for your help and give me some ideas!

• Help! installed at the factory lost programs after the failure of the hard drive!

  Hello
  We run windows Vista Edition 32-bit home premium.  Installed at the factory we have Microsoft works and many options, and additional games. After we have made of our hard drive wiping and a clean install of windows Vista again these elements did not return to the top... We have done this before and it was something we had to do to get these things once again, but I forgot what it was.

  We have no shadow on our hard drive... we have removed all the shadow copies and all the windows of OLD files, etc... We needed a drive completely clean.
  Can someone please tell me how to restore the other options?

  Also since the reinstallation of Vista we have many games that once installed so see the as installed in the control panel in Add Remove programs but are not of anywhere in the computer in the list of programs or in a search?

  Thank you
  Wisfamily

  Hello WisFamily,

  Thanks for posting on the forums.

  Quick questions, did you use a Windows Vista DVD to perform a clean installation of Vista? You have a set of disks of restoration of the manufacturer of your computer or you have separate disks for Vista, Applications and drivers etc. ?  You've probably used your before restore disks to restore your computer to factory settings where it will be wipe your drive and perform a clean installation of Vista with your applications. Please check the disk set you have and check with the manufacturer on how to perform a full restore of your system.

  Hope that helps, please post back and we do know.

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Saitek x 52 not detected by the driver install program

  I have a Saitek x 52 flight control system that will not install the drivers for Saitek, the soft micro drivers install instead.  The software program for the flight control system, without the driver from Saitek will not find the 52 x. I tested the x 52 on a Windows 7 machine and run the driver installation program and the drivers are properly installed. In turn the software program then works on the machine win 7. What is the installation ran same driver on win machine 8 software it stalls out and fails to complete the installation. I tried to install it as an administrator, download the latest drivers and software from Saitek programming, ask customer support assistance, that all Saitek these have had no positive results. It seems that the driver installation program fails to find the x 52. The 52 x appears in the Device Manager you. Other than downgrading the OS to win7 I don't know what to do.

  Any help would be appreciated.

  Thank you dude! Which seems to me also! You have me saved from an another reset of windows and many hours lost to no vol. really, really, appreciate it!

• How to uninstall AVG anti virus program when it does not show in the list of programs?

  I can't uninstall AVG anti virus program because it does not appear in the list of installed programs. I need to uninstall it to install the software Total Defense.

  You will find support for AVG (free) in this forum-online http://forums.avg.com/us-en/avg-free-forum