como o código of emparelhamento device empressora can
como o código of emparelhamento device empressora can
Hello
See this page to select your language:
http://support.Microsoft.com/common/international.aspx
====================================
Or sorry that it is area English.
Left click at the bottom of the Microsoft Community page
English and set your language.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Como o código pagamento side joints no meu site?
Como o código pagamento side joints no meu site?
What kind of code you add? If it is integrated with HTML, you can use:
Object--> Insert HTML
-
I just lost an important note on my I-phone - since it has been deleted by mistake on one device, the cloud - I deleted all devices - how can I get it back?
Have you connected to iCloud.com and looked into the record DELETED RECENTLY?
-
I need to download pictures from 4 other devices - how can I force to connect?
I have 5 iOS devices - all seem perfectly OK on my iMac in iTunes, but only one (the older iPad!) appears in Photos - but I need to download pictures from 4 other devices - how can I force them to connect?
Tell us about the latest version of your Mac OS X and we can advise you - OR - we can ask our guests of rename this one and move it on OS X version forum
-
No sound
I had sound earlier, had a power failure dual system is back, but no noise saying NO AUDIO OUTPUT DEVICE.what can I do?Hi DocBecker,
What operating system is installed on the computer?
I suggest you try the steps from the following link:
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows -
Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do
Hello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?Take a look at the following article that may help you.
http://community.us.PlayStation.com/message/2371488
I recommend you contact Sony support teamfor further assistance.
-
Wireless dead after reinstalling Windows. Device Manager can't see the map
Hello
I have a laptop model Lenovo 3000 N200 14W 0687. It was teeming with virus so I wiped the hard drive and installed Windows XP Home Edition from scratch. Now Device Manager can't see the wireless adapter and Wireless does not work. I tried to download and install the Wireless driver on the Lenovo site (I don't have a disc of relocation); but I got errors. Anyone know what could cause this and a fix?
If you are interested, here are the details of what happened when I tried to download and install the drivers:
Device Manager gives me the adapters three following network:
Network adapter 1394
Broadcom NetLink (TM) Fast Ethernet
MAC bridge MiniportNone of which resemble wireless cards. So I used the link http://consumersupport.lenovo.com/ot/en/DriversDownLoads/Drivers.htmlto try out. Enter my serial number L3X3516 took me to a support page client lenovo that says
Total 13 drivers need to be repaired/upgraded, 9 drivers in need of repair, please click the "Download" button to begin to repair
One of them was this:
Intel (r) PRO/Wireless 3945ABG Network Connection
I downloaded it and it says: 'the contents of this file cannot be unpacked. the executable file that you are trying to run has been damaged. You can get another copy of the file, verify its integrity, and then try again"
So I used google to find this site:
who told me that my computer is a Lenovo 3000 n200 Type 0687.
Using google once again, I found this page:
http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-68011
which was another version of the driver. So I downloaded and unpacked it. I then took a glance at the .txt guide provided with the driver. It is said:
1. Start Windows XP and log on with administrative privileges.
2. Double-click the driver package to extract it to your hard drive.
The default location is C:\SWTOOLS\DRIVERS\WLLANINT
3. Click Start, then click Run...
4. Specify SETUP.EXE with the full path name where you extracted the
package in step 2, and click OK.
Example: C:\SWTOOLS\DRIVERS\WLLANINT\SETUP.EXE
5. Follow the instructions on the screen to complete the installation. Unfortunately, there is no setup.exe file in the folder so this has failed. Regards, satherb
configuration > wireless lan support > enabled
for display drivers, re - install it: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67978
and on Device Manager, please, provide the device id. (eg PCI VEN_8086 & dev_2929 & subsys)
or if you know which wireless adapter you have, download drivers from the download page, then re - install.
-
I removed my whole OS on an external device, what can I do to get back on my computer?
original title: HELPI removed my whole OS on an external device, what can I do to get back on my computer?
What is the make and model computer you have?
I suggest that you try to contact the manufacturer of your computer and ask a set of recovery disks will be sent to reinstall Windows 7.
-
Device Manager can't see the DVD ROM
I have a HP Pavilion dv9628nr notebook PC, with the version of BIOS F.31, running with Vista SP2.
He stopped recently to recognize the DVD ROM, which does not show even as a device in Device Manager, so I can't uninstall or update the drivers.
In the BIOS it is listed as a boot device, so it's there somewhere.
I tried the Fix Windows, what has not worked as well as regedit to delete the LowerFilters registry entry (there was no UpperFilters one listed), but none of this has given me my DVD DRIVE in Device Manager.
I wanted to try to disable AHCI mode for the drive controller in THE system BIOS, but it is not an Advanced tab available to get to this. And I don't know if this will solve the problem anyway.
Suggestions appreciated. Thank you and Merry Christmas.
Hello
First, reset the defaults in the bios as follows.
Shut down the laptop. Tap here to f10 as soon as you start Notepad to open the menu of the bios. Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
Check if the drive now appears in Device Manager - if it doesn't, try the following.
Even if the optical drive is listed under bootable devices, it can still have a hardware problem
An option here, you could try this will give a good indication that the problem is with Windows or the optical drive itself.
Create a bootable Ubuntu CD
The Ubuntu CD that you create should work as you start the laptop (IE outside of the Windows operating system), so if this works do not, the problem is almost certainly a hardware with the DVD player problem
On another PC, follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps described in the part 3 to 'Try' to see if this OS runs from CD. The 'try' option does not need to install on the hard disk, it just runs from the CD.
http://www.Ubuntu.com/desktop/get-Ubuntu/download
Let me know if it will work.
Kind regards
DP - K
-
Hi, my dvd player does not show on my computer and Device Manager. can someone help me? HP dv6700z laptop.
# It is now showing there either. Thank you.
-
The number of devices that can be assigned to view application you develop it?
The number of devices that can be assigned to view application you develop it?
I guess it's a question about iOS, I don't think that android nor Windows have Developer device limits.
Apple says you can save up to 100 of each type of aircraft a year, it looks like 100 iPads, iPhones 100 and 100 iPods. This is a change from the past, where it could save up to 100 devices, period.
I had not really noticed this change in policy, but I guess that it is indeed. For years there were rumors of Apple increases the limit of the device, but it never happened.
Here is a link to apple support document: Management - Support - Apple Developer
-
I use Dreamweaver CS4 and can no longer connect to Device Central - can you help me with this?
I use Dreamweaver CS4 and can no longer connect to Device Central - can you help me with this?
Device Central was interrupted on 23 April 2012.
http://www.Adobe.com/products/devicecentral.html
And replaced with Adobe Edge inspect CC (for subscribers of cloud)
http://HTML.Adobe.com/edge/inspect/
Nancy O.
-
How many USB devices you can Garland to the latest Mac Mini?
I need to connect several USB devices to my recent Mac Mini but it seems that if they are plugged directly into one of the 3 ports on the back, will not work. Any ideas on that?
You need a powered USB hub.
Make sure you get 3 USB hubs say that will work with a Mac.
Re: Is there a USB 3.0 Hub that really works with the Mac Mini?
-
My iPad has a lot of videos/pictures on local memory. I disappear off the coast because I see that they are in my photo database and iCloud drive. When I try to delete them it asks it will remove them from all devices. I just have to remove them from the iPad. Ideas?
Thank you!
You cannot delete without delete icloud, unless you turn off and away the iCloud synchronization.
-
I have to start MAX to recognize another device USB CAN
In my project, I use a converter USB CAN (NI USB-8473). I have several adapters for different customers. When I connect an adapter was connected before, my LabVIEW program only recognizes when I run MAX.
The card receive CAN0 address as the previous card, but obviously not before MAX is started. This happens when an executable is run (on a computer without LV) or on the LabVIEW Development System. I didn't stop my program.
Why is this? I can trigger the detection of the converter in the program?
Greetings,
SHB
Hi shb.
I tried to reproduce the problem you describe with a USB-8472 and a USB-8473. Using the example LabVIEW NI-CAN
\examples\nican\Frame - Basic.llb\CAN pass - based.vi of the event, I could stop the VI, unplug a USB, branch in the second device and restart the VI without causing errors... Can I ask what version of the NI-CAN driver you use? I used the last being, 2.7 NI-CAN, which is available as a "setting aside" of NOR-XNET (setup.exe can be directed to only install NI-CAN). You can find the download here:
NOR-XNET 1.1 - PharLap, Windows 7 64 bit/7 x 86/XP/Server 2008 x 64
If the upgrade does not resolve this problem, I will try to get their hands on a second USB-8473 to exactly replicate your configuration...
Best regards.
Sebastian
Maybe you are looking for
-
Satellite Pro S500 - 11 c - password not recognized
I bought a S500 - 11 c in July. I have set up with a startup password and it seemed ok. Turn it on, enter the password and off you go.I've written the password down "just in case". Due to circumstances the laptop then unused for about two months. Now
-
Subject line covers the major part of the question. Version 4.0 has worked well. I uninstalled and reinstalled 4.01. No change. Tools, Addons does not reveal addons. New window opens with some missing toolbars and a blank page. Using tabmix plus; May
-
What operating system is used on the readynas RN10200?
I need to know what is the operating system of the system, and how I can access! I think it is probably Linux and am ready to install on a laptop so that I could access the readynas's Chitlins. I am totally not familiar with SSH and do not know how t
-
Switch between the 3 specific values button
Hello I want to have three constants in a table and when a key is pressed to the point of the table moves from one position to the top. Also, I want to display this value of a digital indicator every time that the key output. I'm new in Labview and I
-
Requirement to activate windows when suddenly it works fine
I have been using a legitimate copy of XP for over a year. It was working fine this morning. When I turned on my computer back this afternoon I was prompted to activate windows and not more, without submitting it online or by calling can not move for