USB port: compaq 15-s109ng

Similar Questions

• USB: compaq 15-s109ng

  have a problem with the laptop usb doesn't know me and do not download from the Internet... and I can't open the USB... laptop is compaq 15-s109ng... windows 7 64 bit

  Hello:

  You have to plug your USB key in one of the USB2 ports until you get the 3 USB driver installed,

• Two of the three USB ports works only on Compaq CQ71 (Windows 7).

  Hi, I have a Compaq Presario CQ71.

  There is a USB port on the left and two on the right. The one on the left works but the two on the right are not.  An "unrecognized" message when you use one of them, but not with each other, however there is power coming from him, as when I plug a mouse to infrared light is turned on.
  Ive updated Chipset drivers and BIOS on Compaq website. I also made sure to do all the updates of Windows. Help, please! Its driving me crazy!

  Did you meet a very old thread... but... I know that with some machines, you can actually disable some ports USB in the BIOS. Take a look here and see if there's anything out there.

• pilot: compaq 15-s109ng

  Compaq 15-s109ng I need a windows 7 64-bit driver

  Hello:

  There are W7 x 64 drivers on the support on the link below page.

  http://support.HP.com/us-en/drivers/selfservice/Compaq-15-S100-notebook-PC-series/7234969/model/7633582

  If things like the smbus controller, usb and graphic doesn't work, use the G2 of 250 HP.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6431933 & swLangOid = 8 & swEnvOid = 4059

• Boot from USB on Compaq Presario V2610

  Hello

  I have an old machine on which I intend to install Lubuntu 13.10 replacing, which is the following.

  Compaq Presario V2610 notebook PC

  PhoenixBIOS F.25

  BIOS settings:

  Advanced > Boot Order >-hard drive >

  BIOS hard drive Option:

  ! IC25N060... (I disabled the HARD drive via the '! ')

  AVIXE PDU01_2G 67A2.0 (I have a USB 2.0 flash drive that also supports 1.0, which the BIOS sees it, and it is recognized)

  The BIOS is configured to try hard as third in the boot order, even the default normal setting.

  I confirmed that this USB itself and its distribution Lubuntu is valid. Lubuntu stops on her successfully, on another machine manufacturer and BIOS. However, when I try to boot from the USB port on the Presario, I see:

  PXE - E61: Media test failure, check cable of

  PXE - M0F: Exit PXE ROM

  If I connect a LAN cable to remove this message, I see this instead:

  CLIENT MAC ADDR: (mac address) GUID: (guid)

  DHCP... (spinning "/")

  PXE - E53: no boot file received

  PXE - M0F: Exit PXE ROM

  I didn't, it should be a cable LAN by the BIOS for a standalone install USB, but in all cases, the BIOS doesn't seem to be reading this viable USB Lubuntu drive. I tried both ports on the machine.

  I also tried a Win7-32 bit USB, via USB from the separate manufacturer a - DATA. In both cases, the Presario BIOS recognizes the device, the name of his unique manufacturer, but fails to boot on it.

  Can you let me know what I am doing wrong?

  Hello

  I solved the problem on my own. It turns out that boot prescription must be set up in the BIOS, rather than simply turn off the HARD disk write via «!» F5/F6 accomplishes that.

  BIOS hard drive Option:

  AVIXE PDU01_2G 67A2.0 (F6 to swap the order)

  IC25N060...

  The USB key is then recognized at startup.

  Sorry for the post.

• USB ports still under voltage after power off

  Hi, I use a sleekbook of 6-1260ez want on Win8 x 86. After I power the system off, the USB ports have always power. The wired mouse LED is still. In addition, the laptop batteries are drained after 2 or 3 days without being plugged in, although the power is off.

  I installed the latest chipset drivers. the option "Scan now" on your support page is not find old drivers. What can I do? Is this a warranty case?

  P.S. This thread has been moved from the Notebook - HP ProBook ZBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE for laptops - pavilions, Presario. -Hp moderator of the Forum

  This computer has a usb 2.0 support. That so you can recharge your cell phone or your mp3 player with the computer turned off. I found and read the manual of the computer.  That is why your mouse is always on.  Then you'll have to unplug the mouse when you're not using it. I hope help you.

• My DC-7800 will not identify devices on USB port.

  Slim desktop computer HP Compaq dc7800

   

  I bought an opportunity DC7800 (no disc).  I ran the compatibility of Windows 7 software and it didn't come back with any problems.  I installed Windows 7 Ultimate.  USB does not recognize any jump readers, portable discs or iPod (However when I plug in my external drive Toshiba it powers the drive upwards - just don't install any drivers or shoot them in the directory.)  I installed a printer and it prints well, but even with printing action I can not access the printer on the network (I can access the Public folder shared on the network - so that's good).  After you play with it for several hours, I installed Vista Ultimate on.  He always has exactly the same problem with the USB ports (again... motorized Toshiba but don't even recognize).  I installed all the drivers on the HP site.  Really all that my wife needs him for is the internet and sync his iPhone (it is not recognize it when it is plugged).  Either way, I have no plug in a USB or anything before installing Windows 7.
  

  Ok. If you have Vista Ultimate on...

  See to install the latest chipset driver work.  Install and reboot.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=20775&keyword=chipset+installation&lang=eng

  Video driver: installation and reboot.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3459242&prodNameId=3459247&swEnvOID=2098&swLang=13&mode=2&taskId=135&swItem=vc-68809-1

  This driver should install the PCI device.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3459242&prodNameId=3459247&swEnvOID=2098&swLang=13&mode=2&taskId=135&swItem=vc-78668-1

  It seems that USB devices operate normally (at least with regard to Device Manager is concerned).

  If the USB port still does not work after installing all the drivers above, go back and uninstall these usb controllers and restart.

  If it does not, there is probably some kind of hardware problem that I don't know how to fix.

  Paul

• USB ports not recognized on the computer.

  erased win 8 and reinstalled win 7 ultimate. Now computer will not recognize and usb ports. What should I do?

  I use a Compaq Presario 5320. USB works, that I plug my Saitek yoke and it works correctly. It's only usb drives I plug in I get the message, that he doesn´t recognize...

  TA

  The problem with coming back to win 7 is may or may not win 7 drivers.  I would contact Compaq to see if there is win 7 drivers.

  Another problem if your computer comes with win 8 pre-installed revenant may void the warranty

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• How to assign a constant name 'letter' to the USB port?

  My Compaq Presario with Windows 7 has two USB ports on the front and on the back.  I use both to the front to connect a drive hard ext to the back, usb flash drives and a camera. Everytime Iplug in the disk hard ext, the PC assigns a letter to port such as J.  The next time I plug the camera into the same port, the PC gives it a different letter and I need to go back up and reconfigre Norton where to back up.  How to assign a constant name 'letter' to the USB port?

  I think that the previous answer may have been cut off, but they were right. You assign it a letter on the USB port, you assign a letter to the device. With your drive plugged, if you right-click on the computer icon and select manage you will arrive at the computer management screen. Click the disk management icon and you should see your drive listed. Right click on that and you should see a choice to change the drive letter and path. From there, click change and select a drive letter for your device.

• Message from the USB port speed

  I have a laptop HP Compaq NW8240 running on W7 last month recently, I plugged in a USB USBHUB04 of Linksys hub. It works fine but when I plug a flashdrive in there, it displays a message in the lower task bar "this USB device can perform faster if you connect it to a hi-speed USB 2.0 port. Should I have a missing driver? I thought that all USB ports on this laptop was 2.0.

  Sorry that none of the steps that you took to remedy the problem.

  You did exactly what I would have done it, so unfortunately, I couldn't even begin to tell you what to do next.

  You may have to live with the status quo.

  I wonder if this is a false message...

  Your USB devices work more slowly than normal as a USB HARD drive or flash drive.

  Data transfer seems slower than you're used to?

• Closing lid on my CQ61 disables USB ports...

  I try to use my Compaq CQ61Z as a HTPC.  I connected via HDMI to my stereo receiver and use a keyboard and mouse with Receiver USB wireless to fight against it from across the room.

  Everything works fine, except when I close the lid.  I found the power setting to do not have the laptop to standby automatically when the lid is closed, but the keyboard and mouse stop working when the lid is closed.  This pretty much kills the idea to use this laptop as a HTPC.

  As soon as I open the cover, the KB & mouse start working again.  I can't find anything in the power settings that would have an impact on the USB ports.

  Any suggestions?

  If you go into the advanced power options there is a setting for USB devices, you can change to disable selective suspend

• MacBook Pro USB Ports

  MacBook Pro my keyboard and wireless mouse work in my usb ports but I can't mount drive flash sticks? Do not display in the finder, but will be blink in disk utility then disappears?

  Flash drives show in disk utility?

  In the Finder > Preferences > sidebar > devices is verified external drives?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• A 'Powered USB Port' does not work on Mac Mini

  I have an external POWERED USB multiport block. When I plug the Superdrive into a Port powered on the unit, which of course is connected to my Mac Mini (2012) the Superdrive not even she acts as if it is connected and will not accept a disc. All ports are USB 3.0. I'm so uncertain that the Superdrive will work on any USB port other than the one on the Mac itself. Any advice? I El Capitan installed, but it has worked that way before the upgrade.

  This specific USB 3 hub? Not all work with the Mini

  Hub USB 3.0, attached to a Mac Mini does not work

  Re: Is there a USB 3.0 Hub that really works with the Mac Mini?

• iPhone 7 will not play audio via the USB port on the car.

  When I plug my iPhone USB port 7 more in my car (15 Jeep Grand Cherokee), the artist/song/podcast information appears on the screen, but the sound plays through the speakers of the phone.  I have confirmed that my settings are all the same as they were on my 6s, who played without any problems via the USB connection.  Bluetooth streaming works fine - no problems at all.  Any ideas, or is this a problem similar to that people have with CarPlay?

  Welcome to Apple Support communities, kevo.mac!

  Congratulations on your new iPhone 7 more! I see that you connect with your Jeep Grand Cherokee using the USB port. Everything seems to work fine, except that the music plays through the phone instead. I'll be happy to help you to get this working.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  If you are using USB playback

  Restart your iOS device and your car.
  Connect your iOS device to another stereo USB port (if you have one).
  Try another USB cable.
  Update your iOS device.
  Install the updates to the firmware of your car radio.
  Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help.
  If you can not play audio from an app Apple, contact Apple technical support.

  Enjoy your weekend!