Compaq 500 b (VS695UT): missing on Windows 10 DVD player

Similar Questions

• Compaq 500 b (VS695UT): memory Compaq 500 b problem

  I'm sorry to 'beat a dead horse' in this question, but I'm frustrated.

  1. I have improved my Compaq 500 b microtour Windows 7 Pro for Windows 10 Pro.  Everything went well, and I appreciate it.  I currently use two modules of RAM of 2 GB for a total of 4 GB of RAM successfully.

  2. for the purpose of "improvement", I thought that I would be upgrading or increase my 8 GB RAM, installing two 4 Go PC3-10600 (1066 / 1333 Mhz) 240 pin, non - ECC memory bars.

  3. Once installed, the computer refuses to start, and I have a black screen.  I put back the original 4 GB of RAM in the computer, and it starts fine.  I made sure I had the latest and more great BIOS downloaded and installed.

  4. I tried upgrade memory once more, in vain.  I tried to replace a SINGLE module (6 GB of RAM total) without success.

  5. the 4 GB RAM that was originally here works very well. (I'm typing on this computer now).

  6. my thought is that: "even if I'm still in Windows 7 Pro; "I should have been able to spend 6 or 8 GB of RAM", right?

  7. the computer originally came with 2 GB of RAM, and I upgraded to 4 GB.  I read some of the older posts, and I think that I made sure that I use the correct RAM.

  8. ALTHOUGH; When I run a single module of 4 Go PC3-10600, the computer won't start or run correctly. SO I'm looking for advice.  Any thoughts?

  Hello:

  The quickspecs 500b at the link below show that the maximum memory is 2 x 2 GB.

  See page 4.

  http://h20195.www2.HP.com/v2/GetDocument.aspx?DocName=c04113766 & DOCTYPE = QuickSpecs & doclang = en_US & SearchQuery = & CC = UK & LC = in

  Now the way I interpret the Intel G41 chipset info from the link below... it seems to me that on PC with DDR3 memory, the max is 4 GB, and for the PC with DDR2 memory, the max is 8 GB.

  http://www.Intel.com/content/dam/www/public/us/en/documents/product-briefs/G41-chipset-brief.PDF

  Makes no sense to me, but I would say that since 2 x 4 GB does not work and the characteristics of HP say the max is 2 x 2 GB, and the way I read that Intel is to say, it's the reason why the memory does not work.

• HP 500 b Micro Tower: after upgrade to windows 10 dvd player does not work

  Before the update windows 7 windows 10, I ran the windows 10 application to check all my gear.

  Windows 10 says that all my hardware is compatible with windows 10.

  After installing windpws 10 does not work my cd/dvd litescribe drive.

  There is power coming to my dvd player, because I can open & close the player.

  Device Manager does not detect my dvd drive.

  I've updated all my drivers through HP assistant & he said that all my drivers are up to date.

  My pc is a HP 500 b Micro Tower

  Product number: XT419EA #ACQ

  Can someone help me fimding good firmware for my dvd player.

  Hello:

  See that if steps listed from the link below resolution 5 solves the problem.

  https://support.Microsoft.com/en-us/KB/314060

• does not recognize Windows media, dvd player

  I have xp with media player 11. I also have a fast switching with six users on my desk. I think it's a fault of microsoft because a desktop Media Player recognizes DVD, on another it does not recognize my dvd player at all. Am I missing something here? I do * necessary to install the software for each user? None of the answers forum sense.

  I don't know what kind of computer you have, but I had the same problem with my Dell.  After you have reinstalled the sofeware Cyberlink PowerDVD, I have had no more problems.  The DVD have been recognized without incident.

• After upgrading Windows Vista to Windows 7, DVD player and the sound does not work on Hp Pavilion 6807us laptop.

  Original title: multimedia player Super Multi 8 X DVD±R/RW with Support Double layer on my computer is hp Pavilion 6807us laptop detects not.

  I have a multimedia Super Multi 8 X DVD±R/RW drive with Double-Layer drive that is not detected on my computer hp Pavilion 6807us laptop. The same day as my sound stopped working. My OS is windows 7 but was Vista when the problem started. Can someone help me? Buy the way, my sound and my cd/dvd device does not appear in Device Manager. My Dvd Player is displayed in order to start installation. Help please.

  HP doesn't produce the specific drivers for this model, only drivers Vista, win7, and as such it may not work properly.

  If the problem occurred previously under Vista must have been resolved then, as the upgrade, an o/s is unlikely treat a pre-existing

• In Windows Vista DVD player is not recognized

  When you try to burn on a dvd, computer told me no disc in the drive door opens, iclose, of course hadou a disc and I get same message: NO DISC in

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• Satellite A200 - upgrade to Windows 7 - DVD Player problems weird!

  Hello

  I decided to upgrade to Windows 7 rather than replace my A200, which is always good as new after 3 1/2 years...

  In typical MS fashion, the upgrade was not incident free, but the main problem is that my DVD drive will no longer read my 2007 Microsoft Office installation disc.

  I CAN read the disc I've burned before the upgrade (with files/photos matching on etc.)

  Someone at - it ideas? Tried to update the driver and by stopping the service Detection hardware kernel (such as recommended on a forum of MS), but no luck

  Thanks in advance!

  > main problem is that my DVD drive will no longer read my 2007 Microsoft Office installation disc.
  A friend of mine had the same problem with the disc of MS Office.
  It was not possible to read this disc, but other drives were compatible.
  He cleaned the drive laser lens with a hint of alcohol and cotton wool, and it helped.

  Check it!

• Windows media, DVD player.

  When I try to play a DVD, I have sound, but no picture except for two green squares, covering 75% of the screen. Message from IAN listed. Mechanical problem?

  When I try to play a DVD, I have sound, but no picture except for two green squares, covering 75% of the screen. Message from IAN listed. Mechanical problem?

  Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest version of the graphics driver graphics card.

• Qosmio X 500-148 - DVD Launcher cannot detect a Toshiba DVD player

  I had some problems with my Qosmio X 500 - 148 not long after the purchase, resulting in the deletion of hard drives and software reinstalled. DVD playback works ok, but I can't get the Blu - ray to work. When I insert a Blu - ray disc, I get a message "Toshiba DVD Launcher cannot detect a TOSHIBA DVD PLAYER". I guess I need to download and reinstall the Blu - ray software, but can't seem to locate it or any other solution anywhere.

  The useful suggestions to solve the problem would be welcome.

  Hi jsgskydive,

  Toshiba DVD playback software, you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Qosmio > Qosmio X series > Qosmio X 500

  Then do a search for X 500 model and you can find a DVD player to download.

  Check this box!

• Windows Media its DVD Player-not

  My audio Windows Media DVD player does not work.  The audio and the FM plays well.  Can help you with a solution of his DVD.

  No guarantee... but installing an AC3 Filter can be
  worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3 Filter
  http://AC3Filter.NET/projects/AC3Filter/releases
  (tests - AC3Filter 1.63 full b)

  Good luck...

• Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing

  Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing

  Hello

  I have a Compaq Mini - about 3 years - and the noise disappeared today.  The sound icon in the lower right corner of the screen disappeared.

  In the device, other devices Manager screen is color yellow as is the Audio on Bus High Definition Audio device.

  XP sounds and Audio devices Volume Control Panel tab no. Audio Device.

  I think that the driver may be missing?  I don't have the start up CD and don't know where or how, download the drivers of its replacement.

  Any help is appreciated to get my sound back!

  Hello:

  This is the page for support and drivers for your laptop.

  You can try reinstalling the audio driver XP from there.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4105117&cc=us&DLC=en&LC=en&query=CQ%2010%20101SA%20&tool=

• Compaq Presario CQ70: Problem starting. Windows didn't start up.

  Hello!

  I ask help for my huge problem. My laptop doesn't boot.

  First of all, I got problem with my admin user account. It has no boot at all. Error: "your user account only missed. We could not load it. SRY. "

  Then, I did start my computer and go to safe mode. Then I did a system restore. After that everything worked fine. I was thinking its time to format my computer and update my windows vista to windows 7 Home premium.

  Well, I made a bootable USB Flash drive. Windows 7 installation package. I tried to start my computer several times USB key to install new windows. It never not worked. I look at bios Boot media is the USB HARD DISK.

  Then I losed my nerves.  I did a rom of DVD of windows 7. I put the dvd in cd rom. Then shutdown computer. Launch it and press F9 to get the boot media. I choose CD DVD ROM for the start.

  Then my computer freeze totally... I couldn't do nothing. I wait 2 hours nothing happens. Then I stop at powerbutton force.

  Now my computer starts is completely destroyed upwards. It works the bios very well, but after that, he's trying to run windows. It freezes.

  She's everywhere. I try to run the factory settings. Gel

  I try to start the installation of windows 7 dvd rom. gel

  Flash drive USb does not even start.

  Try to go normal boot freeze after executing the bios image. He tries to run the window loading logo, but it fails and freeze.

  I already have, I thought that my HARD drive is golden. But I did a test boot and bios. It is not very well. None does not at all. So, it shouldn't be broken?

  I tried to do something strange reset HARD drive. Unplug all at my feeder area for computer laptop battery. And push power button 30 sec. But it has no effect at all.

  None does not work should I buy a new HARD drive "?" or is my just locked HARD drive or somethng?

  Brand laptop Compaq Presario CQ70

  Windows Vista

  Version of the BIOS F.26

  Advice, should I try?

  Hi @Koodari,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand you are trying to upgrade your system to Windows 7.  You tried to boot from a USB, but after several attempts you have created a DVD with Windows 7.

  You have tried to boot from the DVD but even once is not successful.

  You have checked the boot order and it is set to 1. USB 2. Hard drive.

  Here is a link to HP Notebook PC - configuration of the Boot in the BIOS system order. to help you to change the boot order.

  Here is a link to HP Notebook PC - perform a recovery of the system (Windows Vista) HP. Follow the process on a disk.  Once you have started on the drive just follow the installation process as you normally would.  Of course this isn't a cover you won't get the option to backup your files.

  To say thank you for the reply, please click on the thumbs upwards the button below.

  If this solved your problem please let other people know in choosing the solution provided.

  Good luck!

• Updating BIOS for motherboard Μatx-IG41-H on format Microtour Compaq 500 b

  OK, here's my problem;

  I just bought a 4GB Ram DDR3 1333 Mhz Kingston for my computer format Microtour Compaq 500 b. But when I try to connect this new RAM for my motherboard, pc gives error of RAM and that it does not open.

  It works well with other computers.

  Support members told me to update my Bios, but I can't find any update file which is updated. The only thing I could find is the following; http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = HR & prodTypeId = 12...

  I hope someone can help me with this.

  Thanks in advance...

  Here is the HP Compaq Business Desktop ROMPaq Firmware (ROM family CPT006) aka BIOS downloads for HP/Compaq 500 b/510 MT Professional computer. These BIOS/firmware updates do not appear to address any memory related questions. HP/Compaq 5xxB MT maintenance & Service Guide;

  Memory:
  The computer comes with synchronous dynamic RAM 3 double rate
  (DDR3-SDRAM) dual inline memory modules (DIMMS).
  DIMM DDR3-SDRAM:
  Media memory on the system card can be filled with up to two industry standards
  DIMMs. These media memory are filled with at least one DIMM preinstalled. To achieve the
  maximum memory support, that you can fill out the card system with up to 4 GB memory
  configured in a high-performance dual channel mode.
  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:
  240 industry standard pins
  unbuffered PC3 - 10600 1333 MHz compatible
  DIMM DDR3-SDRAM 1.5 volts
  DIMM DDR3-SDRAM strips must also:
  support the latency CASE 9 DDR3 1333 Mhz (9-9-9 calendar)
  contain the compulsory particulars of the JEDEC SPD
  In addition, the computer supports:
  512Mbit, 1Gbit and 2 GB non - ECC memory technology
  front and double-sided DIMMs
  DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not
  support
  NOTE: The system will not work properly if you install unsupported DIMM modules.

  The total State "up to 4 GB' plug... which is in both slots, therefore each slot can only use a 2 GB DIMM.

• HP Compaq nc8230 Notebook PC drivers for windows 7

  I can't find the HP Compaq nc8230 Notebook PC drivers for windows 7.  Vista listed but not win 7.  Help, please.

  Hello:

  Here's what you need to do to get the W7 to work on your laptop like HP can't not for W7.

  Use professional pilots of Vista support page and the driver of your laptop.

  Most of them will work fine with rare exceptions, and I'll give you the alternatives to use.

  For the graphics, you download and run the ATI file.  You will probably get an error not supported operating system.

  Conclusion of any windows error and go to Device Manager, click to expand the display of the maps section, and then click the standard VGA adapter. Click the driver tab click on Update driver.

  Select travel it my computer for the software method and find the folder of the driver that was created when you ran the file.

  Who will be in C:\SWSetup\sp34716. Make sure that the include subfolders is selected and the driver should install.

  Upon restart, your video should work fine.

  Now, here's where you need to go for a few other pilots:

  Use the Professional Windows Vista driver for the Texas Instruments computer card reader notebook nc6400. The vista support page and the driver of your PC is an older version, and while it will install, the card reader will not work.

  The one on page nc6400 is more recent and card reader works with the nc6400 driver.

  If you use the fingerprint sensor to log, and then use the Vista computer fingerprint sensor driver laptop 6910p and use the W7 software protect the 6910p Security Manager tools

  Use the W7 HP Wireless Assistant to the 6910p software

  Use the W7 Quick Launch Buttons to the 6910p driver.

  Then you should be ready.

  Run the windows update program once you connect to the internet, and WU can find more recent drivers for some of the hardware on your PC.

• Compaq 500 b memory and CPU compatibility problem

  I have a Compaq 500 b MT, that came from the factory with 1 GB of RAM and a processor Intel Celeron E3200 CPU.  I upgraded my memory to two sticks of 2 GB Kingston DDR3 1600 RAM, which worked perfectly for a while.  I then upgraded my CPU to an Intel Pentium E6500 CPU processor (supported), and when the start he gave me a code beep RAM (1 short, 1 long, 3 second pause) error.  I bought 2 sticks of memory PNY thinking I have fried my other sticks.  Same beep code.

  To make a long story short, I tried all possible combinations of the two processors and the three types of memory. The only time wherever I could get the Pentium E6500 to start was with the factory installed 1 GB memory.  It would give errors of memory with any of the other 2 GB sticks, even when considered individually.  Celeron CPU works very well with them.

  Is there something that I need in order to get the E6500 working with sticks of 2 GB of RAM?

  When you updated the modules of memory did you some they are guaranteed compatible? This isn't an amateur PC equipped of a BIOS level that allows for flexibility in the choice of primary and secondary memory sync settings and take. This means that it is essential that one chooses to upgrade memory that meets the criteria specified in the image below. Otherwise, the way the easiest way to upgrade is to buy only compatible memory guaranteed of leading manufacturers of memory.

  

  When I search for Compaq 500 b MT I come with a desktop PC. Is this correct? You posted in the notebook section, perhaps by mistake. If you will check, I can move this correct place.

  Kind regards

  ERICO